I am trying to Boot to Boot Menu so I can select CD rom so i can Ghost image my wife win 8 laptop, the problem is Win 8 wont let me access the boot menu and i am not sure what to do. The brand new Laptop came with HHD and i want to capture the image via Ghost and then put the Ghost image in SSD ...
Laptop is : Lenovo G505
Ok so i have 2 months lenovo ideapad z580 laptop..i am unable to access UEFI BIOS menu and boot menu anymore these were the steps i tried with my laptop.
1) I have windows 8.1 tried going to pc settings and selected uefi settings on restart But the problem still persist the laptop is just doing normal windows 8 boot
2) Tried pressing/hitting F1,F2,F12,DEL keys
3) I have also used lenovo one key recovery button there it showed "bios setup" when i selected it and hit enter it is just doing normal windows 8 boot still i can't access uefi bios
4) Tried updating BIOS for the laptop but unfortunately there was no bios update for this model
5) Tried resetting Laptop by removing battery and ac adapter and pressing and holding power button for 30 seconds but still no use i can't access BIOS yet
6) I tried removing the internal hard drive Out of the laptop and this time one starnage thing happened " before with internal hard drive i used to get lenovo splash screen when turning ON but after removing hard drive and when i try to access bios i can't see the lenovo splash screen at all" still i can't access BIOS!!!
7) I even have tried holding down Shift key, letter B when starting up the laptop but still didn't work seems like windows 8.1 makes changes to BIOS?
I have been using Windows 7 Pro (64) for several years, and today installed a newly purchased Windows 8 Pro (64) OS. I looked on-line and found many articles on how to multi-boot back to Windows 7 after installing Windows 8, and believe I have done this correctly (more below), but when booting up I do not ever see a multi-boot menu, my system boots directly into Windows 8.
When installing Win 8, I booted from my CD/DVD drive with the Win 8 OS media in the drive. (I had previously reduced the volume of my Windows 7 drive and created a new partition that I called "Windows8". ). At the appropriate time in the Win 8 install I chose "Custom", then chose the newly created "Windows 8" partition, then proceeded with the Win 8 OS install. As mentioned above, I do not see the multi-boot menu when booting up, however when in Windows 8 I can see the Windows 7 drive in "Computer", so it was not over-written.
Startup Options - Choose a Default OS to Run at Startup in Windows 8
and am wondering if I should try Options 2 through 4 (1 of)? I build my own PCs so know something about PC's, bt not much about booting to an OS.....
Another options might be installing a third party boot manager, which I have not yet done.
my reason for getting back to Win 7 is to be able to use the PC while I learn and setup Win 8 over time. I went into this believing that getting a multi-boot capability would be very easy.
I tried to set up a dual boot, Windows 8.1 and Linux Zorin 8 on a new Lenovo desktop. I setup the partition first in Windows and then loaded Zorin per the instructions here: [URL].....
Everything seemed to go OK but in the end I didn't end up with the grub boot loader, so I can only boot into Windows. Now I ended up loosing 20% of my hard drive which is now unallocated space that I can't figure out how to reclaim into my hard drive. I tried deleting the partition but it's still there and there was no option to expand volume.
I have installed Blue 8.1 on a separate drive in my system along side 8.0. When I restart the 8.0 boots unless I manually select the 8.1 drive in bios. How can I alter the Boot menu to add the option to boot from either OS?
View 3 Replies View RelatedI was having problems getting to the boot menu of my Lenovo G580 laptop earlier.
I figured out how to get the boot menu - But my only options are hard drive, LAN v4 and LAN v6 boot - Nothing about a disc. So I went into the BIOS boot priority menu and set disk to #1 - It still booted to my hard drive!
So I am here trying to downgrade my Windows 8 laptop to Windows 7. (It is an ASUS X55U by the way)
Every time I go to advanced startup settings it doesn't show the troubleshoot option, only the Continue and Turn Off Your PC options. I've tried everything and the option won't appear.
my OS is Windows 8.1 64-bit. It boots just fine, but I suddenly found out that something wrong happened with my BCD store. Tried more workarounds but none worked. The last I found How To Restore Windows 8 Boot Options Menu ended on bcdedit error mentioned below. The problem indicates with following signs:
- bcdedit /enum prints error "The boot configuration data store could not be opened."
- bcdboot C:windows prints error "BFSVC Error: BcdOpenSystemStore failed with unexpected error code, Status
= [c000015c]"
- msconfig's boot tab shows empty OSes list (nothing on the tab is clickablle)
- the same with System Properties, Advanced tab, Startup and Restore dialog (OS dropdown has no entries)
- Trying to enter diagnostic boot by Shft + Restart doesnot seem to offer full recovery menu. It boots to GUI boot menu offering Continue or Troubleshooting, Troubleshooting submenu offers Manage UEFI options (this brings me to BIOS setup after reboot) and Shut down. No manage boot options, no other choices.
All of this point me to that my booting configuration is somehow ill (I wonder a bit that Windows still can start).
I have a lenovo G505 laptop - it will no longer connect to my BT home hub despite it showing as being available. I suspect it might be to do with the fact that it is has a passkey - I entered it yesterday when prompted and it connected fine, but now I'm not being given the option of entering the key.
I've also tried connected using the BT wifi (as opposed to homehub) but once again it will not connect me. I've been through all the troubleshooting options, and searched under every term I can think of, but nothing is working.
My Lenovo G580 laptop won't start up. When I turn it on using the power button it goes straight to boot menu/app menu. There are various options there to choose from, but whichever one I choose, it keeps going back to boot menu. I've tried using the novo button, but it still doesn't work. Whatever I choose from the novo button screen, except "BIOS setup", keeps taking me back to the boot menu. My laptop won't start up.
View 9 Replies View RelatedI have an older Dell laptop with no secure boot that has Windows 8.1. I shrank the partition and installed Linux for a dual boot setup. Normally I install the GRUB2 to the root of the Linux partition so I don't "see" the Linux installation at all until I use easybcd to create a boot menu item. Easybcd wipes out the pretty blue GUI boot screen and you end up with the black and white "legacy" menu. This was all expected.
Now the weird part. Sometimes when I boot the computer I get the black and white boot screen and sometimes I get the modern GUI boot screen. I prefer the black and white boot screen because the modern boot screen does a second reboot when you select a linux installation.
I have a desktop PC Acer XC600, the hard disk is formatted in the UEFI-Scheme. Now I want to do a clean install of a fresh Windows 8, but I cannot manage to boot into UEFI-mode, neither from DVD or USB.
I can reach a boot menu by pressing F12, but there is nothing like shown in the article about installing Windows 8 in UEFI mode. Only standard bios devices show up. There are simply no UEFI devices. I tried different usb sticks, dvds, formatted them different ways, but the best I can get is the point where setup says "cannot install because the disk is formatted GPT".
But the acutal system is definitely running in UEFI mode (?)
I partitioned my hard drive and installed a second copy of my Windows 8.1
I like to experiment with registry settings, tweaks, etc so I use the second installation as a guiney pig, leaving my primary copy untouched.
My question is how to I get the second copy listed on the graphical Boot Options Menu? Right now, I have to press [ESC] on reboot to select it in BIOS settings.
I am trying to access the boot menu or Setup on a Gateway NE56R31u laptop. Searches have said it could be accessed by pressing Esc or F10 at the Gateway boot screen, but I've been unable to make that happen. I've done this hundreds of times on other computers, so I know the technique and the timing that has worked in the past. I've also tried Del key, Fn + F10, F8. How to make this happen?
View 6 Replies View Relatedi'm using a Gateway Windows 8 64 Bit.
I know how to access the boot menu using the advanced troubleshooting option inside the computer. But, what if Windows 8 becomes unbootable and I cannot log into the machine? There is no boot menu option like Windows 7.
I have heard if Windows will not boot, it will display the advanced options automatically. Is this true?
Also, if I power down my system while it is booting up will I be able to access the boot menu on next startup?
My Acer Extensa 5620Z originally came with Vista, then I clean installed Win 7, now upgraded to Win 8. Since the latest upgrade, I am unable to access BIOS or the boot menu. The black and white boot screen used to say to press F12 for boot menu, and something else for Setup, those messages are no longer there. And those key combinations do not work. I've also tried some other combinations I've found in searches - F2, Alt-F10, ctrl F10, alt ctrl F10, F8, del, esc. None work.
Could the upgrade has modified the firmware somehow? Boot screen says Phoenix bios, TrustedCore v1.32 - I think that is the same it has been.
I have a Lenovo U310 Touch that came from the store with Windows 8.1 on it. I need to install Hyper-V and that requires 8.1 Pro.
I have a product key from my MSDN subscription for 8.1 Pro and attempted to use the "Add Features" program from the system screen to upgrade. It takes the code, validates it as ok, goes through some downloading and other stuff then reboots the system. When it comes back up after the reboot it states "Couldn't add features" along with a contact Microsoft Support link.
I looked around and can't find a log file or any error codes.
I've done this on 2 desktop machines to enable Hyper-V with no issues but for some reason this doesn't work on this "Ultrabook".
I've tried this on a hard network connection and on a wireless connection to see if anything changed. Still broke both ways.
The machine does have 2 drives in it, one 20GB SSD for recovery and recovery drivers and the primary drive. I've read where there may be files mapped on that drive that are causing problems, but have no clue how to actually find these and move them.
i installed windows 8.1 using pendrive after shuting down that laptop is not starting. During boot it is not showing anything.Nothing is happening even after i press f2 or f10 or f12.my laptop is lenovo g570
View 5 Replies View RelatedI recently bought a lenovo u410 ultrabook that has a ssd built in. I am wondering if there is a way to move the OS to the ssd?
View 3 Replies View RelatedI got a Lenovo U410 and it comes with 750GB plus 24GB SSD. I think it is possible to install win 8 on the SSD drive?
Also, the main reason why I'm asking is:
1) I don't have a sticker on the back of my computer with a key, and I don't know what I'd do if software asked me for it
2) It doesn't have a CD/DVD drive. Would it be possible to boot windows from external HDD or I'd need a memory stick?
How to hid all the partitions in the factory installed HDD for Lenovo Y580.
This is the scenario.
Firstly, i successfully migrated all of the following partitions:
OEM/Hidden partition,
C partition: boot drive/ program files and data drive &
D partition: containing drivers
from my Lenovo factory installed HDD to the SSD and to use the SSD as the primary boot drive . Now, i plan to use the factory installed HDD as my data drive. (I am using a caddy tray for this whereby i plan to swap out the optical drive and pluck in the Lenovo factory installed HDD). However, for "safety reasons" i do not plan to re-format the entire factory installed HDD but rather to keep those partitions just in case if my SSD fails.
Hence, how do i turn all the three partitions above (in the Lenovo factory installed HDD) to become dormant? I want the computer to boot up from the existing SSD but then to treat the factory installed HDD as the data drive and not to read from any of the three partitions in the factory installed HDD.
I am planning to use EASUS as my disk partition freeware.
I just bought a new Lenovo G580 that came with Windows 8 on it and I can't get into the BIOS settings in order to change the boot order....
View 9 Replies View RelatedIs it possible to change the way win 7 looks,such as the lack of the start button,and the applications as they are in win7 from the start button?
The Windows 8 came with the laptop. The only reason I am interested in Windows 8 is bitlocker.That is probably the only feature I am interested in.
After creating a UEFI bootable USB thumb drive with Rufus (using Windows 8.1 Enterprise ISO x64), for a Dell Optiplex 3010 (configured as UEFI only, no CSM, latest firmware version, Windows 8 installed), I didn't see a USB boot option, so I tried to add one manually. Unfortunately I erased the existing boot option (boot manager) by mistake. Although there were two boot options for PXE booting, the machine will not start anymore, even when there is an active WDS server on the network.
I also see Led's 2 and 3 lighting up, meaning according to the manual 'hardware ok but bios possibly damaged/corrupt'.
I understand I cannot start the machine from a bios boot disk because of GPT partitioning, and the UEFI USB boot disk I made might be corrupt (as it didn't show up as a boot option), however I don't understand why it won't boot from the PXE network card, as these boot options are still there.
I am trying to install the Windows 8 DVD over the current XP OS, but in MyComputer, the DVD Drive isn't listed in the tree view. Device manager says it's installed properly and functioning well. My Q is this: how do I run the installation DVD from the DVD drive using the Command Prompt. On Windows Start-up I hit F12 to access the boot order, and when I arrowed down to the DVD drive and hit ENTER, Windows would just jump straight to the XP start-up process. It's like something won't let me access the DVD Drive.
View 9 Replies View RelatedWindows has been crashed and i am not able to access any windows apps as in screenshot,but able to use another softwares. Also, file explorer isn't working properly. I tried repairing but i am getting error. I might need to reboot anytime.
View 3 Replies View RelatedI've had Win 7 Pro on my laptop for over a year. I installed a 2nd hard drive to it recently and today I installed Windows 8 Pro on the 2nd hard drive. It's been a roller coaster of good & bad luck.
The first install went fine, until I tried to install the Windows 8.1 upgrade from the Windows store, then things went bad and I had to go into Windows 7 and eventually delete the Windows 8 volume and change it from MBR to GPT because of UEFI (no secure boot enabled). What a stretch of error messages telling me I can't install Windows 8 on the blank hard drive because it was or wasn't MBR or GPT, or the automagically made partitions weren't in the right order.
After spending over 7 hours twice in a row installing Windows 8, I finally find out that there's no boot option for Windows 7 anymore.
The only clue I have is to use a Windows 7 repair disk and use diskpart.exe and make the Win 7 drive "active" but that's a little foreign to me at this point.
I'm looking in Computer Management / Disk Management from within Windows 8.
Disk 0: SYSTEM D: 438 MB NTFS (lengthened from 199 MB with EaseUS because Acronis 2014 thought it too small while crashing), Healthy (Active, Primary Partition); Win 7 E: 930.98 GB NTFS Healthy (Primary Partition); HP_TOOLS F: 102 MB FAT 32 Healthy (Primary Partition)
Disk 1: 300 MB Healthy (Recovery Partition) {no letter}; 100 MB Healthy (EFI System Partition) {no letter}; C: 931.00 GB NTFS Healthy (Boot, Page File, Crash Dump, Primary Partition)
And several other external disks which don't deserve mention today.
I have a multiple operating system and used to get the blue graphical boot menu with a rectangle with the name of each operating system in it. After a few boots it went back to the text menu, and only returned a couple of times. Is there a way to get the graphical boot menu back permanently? It looks a lot nicer. I have XP, Vista, 7, 8, 8.1 .....
View 6 Replies View RelatedFirst, some context: I have a Dell Inspiron 15R SE that came with Windows 8.
I've managed to get a working dual-boot system with Ubuntu 12.10. I can't remember exactly how I done that, but I remember that I had to disable secure boot. I think that the boot configuration those days was:
Secure boot: DisabledLoad legacy option rom: EnabledBoot list option: Legacy
This "configuration" worked perfectly for 6-7 months.
Then, one day (last week, can't remember the exact day), when I was using Windows 8 the computer crashed. I hard-rebooted and got this screen:
After executed boot-repair from a Ubuntu LiveCD dozens of times I've decided to eliminate Ubuntu temporarily and focus to get a system with Windows 8 working nice.
Then I used my recovery DVDs to recover the system. Yup, Windows has booted. But when I restarted first time I got the same error. Then I, digging a solution, pressed F12 after a reboot and got here:
The highlighted option allows me to boot into Windows 8. So I went to boot options (F2) and changed the following configuration:
Load legacy option rom: DisabledBoot list option: UEFI
Now I can boot directly to Windows without need to press F12.
But my objective isn't complete. I want to erase all Ubuntu entries from the seconds image and restore the legacy boot from the first imagem (because they worked before).
I did two things:
I erased all partitions related to Ubuntu (root partition and home partition).I created a Windows recovery disk (not a system recovery disk).
I used the recovery disk to run the automatic recovery procedure (I forgot the exactly name). I've runned it at least 10 times with no success. Then I went to command prompt to try the famous triad: bootrec /fixmbr, bootrec /fixboot and bootrec /rebuildbcd. Still, no solution.
Late last Fall I bought a new Desktop, an HP H81414, with Windows 8 installed with the intention of installing Windows 7 on an SSD. I migrated Window 8 to an SSD, removed that from the system, installed new SSD and put Windows 7 on it. Both worked fine. I wound up with 2 SSD's. capable of running on the EFI BIOS machine with Secure Boot turned off. I later bought a new laptop with Windows 8. I found the Win 8 with Classic Shell to be very acceptable.
What I would like to do now ,if possible, is to mount both SSD's in the HP case and switch to either one of them at boot.
I have a windows 8 64 bit lenovo g 580 20157 ...
Unable to access bios or uefi, when I try to access uefi pc just restarts. Ihave disabled quick start up in windows ...
Also when i boot up pc and able to get menu go to bios or boot option just boots into windows ...