Setup Installation :: How To Get Back (Choose Your Operating System) Menu
Mar 28, 2014
I have a multiple operating system and used to get the blue graphical boot menu with a rectangle with the name of each operating system in it. After a few boots it went back to the text menu, and only returned a couple of times. Is there a way to get the graphical boot menu back permanently? It looks a lot nicer. I have XP, Vista, 7, 8, 8.1 .....
I'm dual booting Windows 8 and Linux Mint 14 right now with GRUB2 as the MBR. I changed the MBR to Windows, but didn't like the menu screen so I went back to GRUB2. Now, when I select Windows 8 from GRUB2, it has the choose operating system screen and it boots after 5 seconds or if I select it. I used EasyBCD to add the boot entry for Linux Mint prior to re-installing GRUB2 as the MBR. Then deleting the boot entry after switching back to GRUB2. I know on Windows XP, you would edit the boot.ini file located in the root of the c: driver, but on vista and later, I'm not sure how to edit the bcdedit.exe file in c:windowssystem32. When I type the command into command prompt, it displays all the information inside the file, but I'm not sure what command to use to fix the issue.
I reinstalled windows 8.1 on my Samsung NP530U3C-A10EE. And now the problem this that I can't boot it without usb stick that contains windows installation files. I can boot up windows and remove the usb stick evertything is working perfectly, but if I try to boot up win without usb, it gives error "Operating system not found. Press CTRL+ALT+DEL to restart". VOLUME C: is one where windows are installed (SSD), System Reserved is the system partition that windows create automaticaly (SSD), volumes D: and F: are my hdd volumes D: is empty & F: is stored with my personal files (photos, music etc.)
Acer Aspire V5 laptop that was running an OEM Windows 8 to upgrade to 8.1.
After selecting the Upgrade to Windows 8.1 via the store, the system went through it's install procedure, however after it does an auto reboot, it gives you a blank screen with the message No Operating System found, in the upper left corner.
But, you can turn the machine off and back on, and it will boot just fine. However if you select restart it does the same thing "no operating system found", on restart and again you must power down and power back on.
I have searched for fixes, but all seem to point to some sort of re-install process. I am not to crazy about the idea of re-installing to factory settings or doing a repair back to Windows 8 and attempting to upgrade again, are their any known shorter fixes for this?
And if I do go back to Windows 8, and try to upgrade again, what is to say it won't happen again?
I got this msg tryng to refresh my pc . because my vaio gate app wasnt working right . so after the restar i just got the blue screen with this error the boot configutating data file dosent have valid infomation of an operating system.
I previously used ubuntu in my Windows 8 Pro and Windows got many errors so i deleted the folder of ubuntu..did not uninstalled and all that. now it shows ubuntu on OS choose Screen. then i thought installing Ubuntu would overwrite the existing one..but sadly i have two Ubuntu Choice..one is empty and another is working.
Now, how can i edit that screens setting. by setting i dont mean going to advance setting and choosing default os. I want to edit like in Windows 7, boot.ini file.or If there's any other way to remove that empty Ubuntu from the OS choice Option
I have three operating systems on my pc. I only recently installed a windows 7 64 bit on a ssd but after doing so, I had to do a system image recovery to my windows 8 installation from a date prior to the new windows 7 install. This Windows 7 is not on the list of operating system options in system startup so how do I add it?
I have just installed windows 8.1 on Dual Core Laptop. Just wanted to know how can I create a backup of my Windows 8.1 installation so that in future if Windows crashes I can restore the installation+other s/w installed, like we do fresh install of Windows through USB boot.
I purchased my HP Envy laptop a few months back - it came pre-installed with Windows 8. This ended up becoming problematic because as a gamer, a few of the games I wished to play were not compatible (even after scouring the net and researching a million ways to try get certain games to work).
So to cut a long story short, I did a full partition backup of all the partitions my laptop and then reformatted everything into 1 single hard drive, which I then installed Windows 7 on to. While Windows 7 works well on this machine, I've lost a few functions due to some incompatible drivers (like the amazing audio my laptop used to have, the fingerprint scanner, etc). I soon came to discover that my laptop model was specifically designed for Windows 8 and could therefore not be perfectly compatible with Windows 7.
So now, I would really like to restore how my laptop was beforehand (with Windows 8), although I am not sure how to go about doing this. I still have my full backup of my laptop's previous state. The program I used to back it up was EaseUs Todo Backup. This may seem like a bit of a dumb question, but I'm a little nervous to tamper with things I may not understand, like I did when I previously downgraded my PC to Win 7.
Friend of mine had a dual boot of windows 7&8 then, he tried to remove windows 8( it's partition was active but windows 7 wasn't active), he first deleted Windows 8 from msconfig then tried to delete the partition of windows 8( but Disk management didnt allow him neither easeus partition manager did, so he tried to keep windows 7 partition as active using easeus manager, then after completing the action, the PC failed to start, he tried automatic repair,but that bore no fruit... the PC says " Couldn't find any operating system, press ctrl+alt+del to restart...
edit: my idiotic friend after removing windows 8 from msconfig,upgraded win7 to Windows 8... suspect that MBR software has been corrupted... so is there any way to make his PC , boot again and remove the windows 8's( previously clean installed) partition ...
I had win7 and Windows 8 on my system. then I deleted win7 and installed a fresh copy. the boot screen is now traditional black and white boot screen where we have to choose OS. I want Windows 8 blue boot screen back.
I have a Toshiba laptop with windows 8 pre-installed in it. I would like to take a system image including OS, drivers and software. After that need to install windows 7 keeping windows 8 as it is. In case of failure, this image can be restored right?
If I want to remove windows 7 only how will I do it to keep windows 8 only.
I was using my laptop and this came up on my screen [URL] .... After my laptop restarted, I used it for about 5 minutes before it froze. When i next used my laptop, It stayed on the Toshiba screen (the first screen when the laptop is turned on). After about 3 or 4 minutes, the laptop opens the automatic repair feature and this comes up on the screen [URL] ..... I have tried tapping both F8 and F12 throughout start up to try and repair the computer although this doesnt work either. I have opened the boot menu and tried to select the HDD Recovery option although it says no bootable media, please restart system.
Is there a way to change from 64 to 32 bit. I ran into a problem with running a program from a web site that implied that I needed a 32 bit web browser instead of 64 bit web browser. I did not put the 64 bit browser in so am unaware of how to fix this issue. It is from windows 8.1 x64 based processor ie version 10.1
my laptop upon powering on i get an error message in the top left hand corner stating operator system not found or detected w/e also accessed bios screen via F2 and the HDD not found not to sure what HDD is i think its harddrive info would work. Anyways i purchased a five disk media restore which contains 1 system disk 3 part recovery media and 1 disc titled language. upon attempting to restore the loading gets hung up in the process also tried numerous times and sometimes wont even allow me to select a restore route.
I have a gateway laptop with windows 8 on it and need to use the recovery disks. When I put one it goes through the language and all that then it says switch to legacy bios mode, i do that and it says switch to uefi mode. I have gone thru this a thousand times now. what to do or how to do it. I know it has one other mode but I can't get it to that mode to try.
I have a Win 8.1 laptop without a disk drive which also did not come with a cd of operating system. What software, preferably free, can I use to copy my operating system to USB in case I ever need to reinstall Win 8.1?
How do I just copy the operating system without all the software I have added since acquiring this laptop?
I am trying to re install 8.0 using the option to re install all programs to Factory Settings. Downloads 99 programs and when it tries to do the updates it fails and then starts the reverting back to original programs. This seems never to finish.
I had done an Image backup so that I could go back to it in case of a failure.
I did not do the option to wipe the disk and then install to factory.
I also could not get my machine to use the Recovery DVD's. But did use the screens that ask you questions about recovery.
I did the recovery twice and it failed both times and never did get back to the first install.
Since there seems to be no reason for the failure in the 99 updates I am at a loss of whether I should try again and wipe the disk clean for C:/
If I'll be able to downgrade the Dell Inspiron i660s-3848BK to Windows 7? It ships with Windows 8 in a bundle through Walmart. My workplace already has the software and several additional licenses available for Windows 7 Enterprise.
I've been reading about how the BIOS will need to be changed. Dell Support doesn't show the i660s as one of those computers that can be downgraded.
So I recently got my brand new Alienware X51 with Win8 pre-installed. Everything went well and I have had no issues until our apartment got a black-out and my PC decided to die. When the power was back on, I tried turning it on, but instead got an error message. Here as follows:
Your PC needs to be repaired
The application or operating system couldn't be loaded because a requested file is missing or contains content errors.
Error code: 0xc0000001
Also I need to mention that I did NOT get any Recovery CD/DVD with the pc itself. What should I do??