How To Add Operating System To System Startup List
May 27, 2013
I have three operating systems on my pc. I only recently installed a windows 7 64 bit on a ssd but after doing so, I had to do a system image recovery to my windows 8 installation from a date prior to the new windows 7 install. This Windows 7 is not on the list of operating system options in system startup so how do I add it?
Last night I was playing League of Legends when I got a BSoD. I didn't think much of it, and just waited for my computer to restart. However, as it restarted, I saw that it was auto repairing and then diagnosing. After that it said auto repair failed, giving me the directory c:windowssystem32logfilessrtsrttrail.txt. I tried system refresh, which shoot me back system refresh failed straight away. The same happens with system restart, but it takes much longer for it to say the restart failed. I have no system restore points to choose from and I have no recovery disks as Windows 8 came preinstalled on the computer. I've troubledshooted for hours and come to opening SrtTrail.txt with the command prompt. It says:
Root cause found: The operating system version is incompatible with Startup Repair.
Friend of mine had a dual boot of windows 7&8 then, he tried to remove windows 8( it's partition was active but windows 7 wasn't active), he first deleted Windows 8 from msconfig then tried to delete the partition of windows 8( but Disk management didnt allow him neither easeus partition manager did, so he tried to keep windows 7 partition as active using easeus manager, then after completing the action, the PC failed to start, he tried automatic repair,but that bore no fruit... the PC says " Couldn't find any operating system, press ctrl+alt+del to restart...
edit: my idiotic friend after removing windows 8 from msconfig,upgraded win7 to Windows 8... suspect that MBR software has been corrupted... so is there any way to make his PC , boot again and remove the windows 8's( previously clean installed) partition ...
I was using my laptop and this came up on my screen [URL] .... After my laptop restarted, I used it for about 5 minutes before it froze. When i next used my laptop, It stayed on the Toshiba screen (the first screen when the laptop is turned on). After about 3 or 4 minutes, the laptop opens the automatic repair feature and this comes up on the screen [URL] ..... I have tried tapping both F8 and F12 throughout start up to try and repair the computer although this doesnt work either. I have opened the boot menu and tried to select the HDD Recovery option although it says no bootable media, please restart system.
I'm dual booting Windows 8 and Linux Mint 14 right now with GRUB2 as the MBR. I changed the MBR to Windows, but didn't like the menu screen so I went back to GRUB2. Now, when I select Windows 8 from GRUB2, it has the choose operating system screen and it boots after 5 seconds or if I select it. I used EasyBCD to add the boot entry for Linux Mint prior to re-installing GRUB2 as the MBR. Then deleting the boot entry after switching back to GRUB2. I know on Windows XP, you would edit the boot.ini file located in the root of the c: driver, but on vista and later, I'm not sure how to edit the bcdedit.exe file in c:windowssystem32. When I type the command into command prompt, it displays all the information inside the file, but I'm not sure what command to use to fix the issue.
Is there a way to change from 64 to 32 bit. I ran into a problem with running a program from a web site that implied that I needed a 32 bit web browser instead of 64 bit web browser. I did not put the 64 bit browser in so am unaware of how to fix this issue. It is from windows 8.1 x64 based processor ie version 10.1
my laptop upon powering on i get an error message in the top left hand corner stating operator system not found or detected w/e also accessed bios screen via F2 and the HDD not found not to sure what HDD is i think its harddrive info would work. Anyways i purchased a five disk media restore which contains 1 system disk 3 part recovery media and 1 disc titled language. upon attempting to restore the loading gets hung up in the process also tried numerous times and sometimes wont even allow me to select a restore route.
I have a gateway laptop with windows 8 on it and need to use the recovery disks. When I put one it goes through the language and all that then it says switch to legacy bios mode, i do that and it says switch to uefi mode. I have gone thru this a thousand times now. what to do or how to do it. I know it has one other mode but I can't get it to that mode to try.
I have a Win 8.1 laptop without a disk drive which also did not come with a cd of operating system. What software, preferably free, can I use to copy my operating system to USB in case I ever need to reinstall Win 8.1?
How do I just copy the operating system without all the software I have added since acquiring this laptop?
If I'll be able to downgrade the Dell Inspiron i660s-3848BK to Windows 7? It ships with Windows 8 in a bundle through Walmart. My workplace already has the software and several additional licenses available for Windows 7 Enterprise.
I've been reading about how the BIOS will need to be changed. Dell Support doesn't show the i660s as one of those computers that can be downgraded.
So I recently got my brand new Alienware X51 with Win8 pre-installed. Everything went well and I have had no issues until our apartment got a black-out and my PC decided to die. When the power was back on, I tried turning it on, but instead got an error message. Here as follows:
Your PC needs to be repaired
The application or operating system couldn't be loaded because a requested file is missing or contains content errors.
Error code: 0xc0000001
Also I need to mention that I did NOT get any Recovery CD/DVD with the pc itself. What should I do??
I have a multiple operating system and used to get the blue graphical boot menu with a rectangle with the name of each operating system in it. After a few boots it went back to the text menu, and only returned a couple of times. Is there a way to get the graphical boot menu back permanently? It looks a lot nicer. I have XP, Vista, 7, 8, 8.1 .....
I reinstalled windows 8.1 on my Samsung NP530U3C-A10EE. And now the problem this that I can't boot it without usb stick that contains windows installation files. I can boot up windows and remove the usb stick evertything is working perfectly, but if I try to boot up win without usb, it gives error "Operating system not found. Press CTRL+ALT+DEL to restart". VOLUME C: is one where windows are installed (SSD), System Reserved is the system partition that windows create automaticaly (SSD), volumes D: and F: are my hdd volumes D: is empty & F: is stored with my personal files (photos, music etc.)
Yesterday I try to move memory from the D: drive to the main C: drive.. I use windows 8 and i try to do it with the partition of windows 8 (win tab +R). Then I shrink the space of the D drive and cant move it to the C drive so finally i just take the shrinking memory and make new drive F.. When I turn on the computer today i find this error:"operating system wasn't found. try disconnecting any drives that don't contain an operating system". I don't know what to do..
Acer Aspire V5 laptop that was running an OEM Windows 8 to upgrade to 8.1.
After selecting the Upgrade to Windows 8.1 via the store, the system went through it's install procedure, however after it does an auto reboot, it gives you a blank screen with the message No Operating System found, in the upper left corner.
But, you can turn the machine off and back on, and it will boot just fine. However if you select restart it does the same thing "no operating system found", on restart and again you must power down and power back on.
I have searched for fixes, but all seem to point to some sort of re-install process. I am not to crazy about the idea of re-installing to factory settings or doing a repair back to Windows 8 and attempting to upgrade again, are their any known shorter fixes for this?
And if I do go back to Windows 8, and try to upgrade again, what is to say it won't happen again?
I got this msg tryng to refresh my pc . because my vaio gate app wasnt working right . so after the restar i just got the blue screen with this error the boot configutating data file dosent have valid infomation of an operating system.
I re-installed Windows 8 yesterday evening (thought it would be quicker than to cleanup and fix my old install) and then directly upgraded it to Windows 8.1. The problem I am experiencing is quite weird: The Operating System doesn't detect the network cable.
With that being said, do not jump straight to the "Did you turn it on and off again" questions. Here is what I have done so far:
Hardware-Side: Cross-check the cable with another computer --> Working fineCross-check the wall plug with another computer --> Working fineTest the connection with the BIOS's connection diagnostic utility --> Link detected
Software-Side: Checking if Windows was up to date --> Nothing to updateUpdating the motherboard's BIOS --> Not betterUpdating the LAN's drivers with the ones I found on the manufacturer's website --> Not better
I am wondering what is wrong with my installation. It was working A1 a few days ago, except for the issues I re-installed the operating system for.
For some reason System Configuration's Startup Selection is stuck on "Selective startup". When I change it to 'Normal startup" and close ad then reopen System Configuration it reverts back to "Selective startup".
Also, not sure if it's related, maybe once out of every 4 or 5 boots Windows 8 starts to the Desktop instead of the Start Screen. This is a relatively new install.
Windows 8.1 ... Noticed shortly after upgrading the Asus VivoTab Smart to Windows 8.1 (from Windows 8) -- that sometimes the system's date and time will be incorrect after a shut-down, turn on cycle. Sometimes the clock is as fast as three hours, but others much longer. Interestingly, if you go into PC Settings > Time & Settings and then toggle off the "Set time automatically" option, and then toggle it back on, the time and date are immediately corrected. However, the time would again be wrong after a shutdown. If the tablet is restarted, though, the time is correct again.
THE SYSTEM: Windows 8.1 (upgraded from Windows Store). Intel Atom processor.
WHAT'S BEEN TRIED: I:
1. Stopped the Windows Time service, registered it again and restated it. The issue remained. I entered the desktop and clicked on the time in the lower right-hand corner of the screen. From here I confirmed the time zone was correct and changed the date and time. That fixes the problem during the current session, but the time/date are again wrong on reboot.
2. Tried Safe Mode. In Safe Mode, the time is correct and stays correct.
3. Tried Clean Boot. In Clean Boot, with all non-Microsoft services disables, the issue returns and the time is wrong again.
THE BREAKTHROUGH THAT BEGS FOR AN ANSWER: While reading this thread, I read up on Windows 8's Fast Startup. Just on a lark, I went into the Power settings area of the Control Panel and turned off Fast Startup. Now the clock is correct. There's a downside , of course, to this in that shutdown and startup is notably slower.
The tablet now keeps perfect time -- but cannot have Fast Startup - which is a bummer for a tablet.
QUESTIONS: 1. Is this is hardware issue? Asus is offering an RMA -- but hate to add to a landfill when this is fixable with software. 2. Is there a way to check the BIOS clock on a Windows 8.1 tablet ? I believe it's a UEFI system.... 3. Is there a way to fix this so fast startup can be used -- and have correct time? 4. Is this a known issue? 5. Is there a way to make sure the Windows Time service is activated in a Fast Startup.
I created a new task using the task manager with "at system startup" trigger. This used to work with Windows 7, but now with Windows 8 and its hybrid boot feature, the task is only run when the system does a full boot.
So, how do I run a command at hybrid boot startup without the user being logged in? I don't want to disable hybrid boot either.
I am trying to create a system image backup and I keep getting this error message
[COLOR=#FF0000]'Threre is not enough disk space to create the volum shadow copy on storage location. Make sure that for all volume to be backup up, the minimum disk space required for shadow copy creation is available. this applies to both the backup storage destination and volume included in the backup. Minimum requirement for Volumes less than 500 megabytes, the minimum is 50 megabyte of free space. for voulimes more than 500 megabytes, the minimum is 320 megabytes of free space. Recommended at least 1 gigabytes free of disk space on each volumes if volumes size is more than 1 gigabytes (0x80780119)"
I am backing it up to a external HDD with over a tb of free space but I understand its not letting me perform the backup because the hidden 100mb hidden system partition is full...if i create a larger partition how can I copy that system partition to it? if that is possible....
actually i wont enter to safe mode in win 8 and i go to windows and press "Win+r" then typing "MSCONFIG" and hit the item "safe boot" and then "minimal" but when my system have been restart i cant access to safe mode and get caught in "welcome page".
I have a new HP Envy h8-1414 and have it pretty well set up the way I want it. It seems to be working out alright.
Now I would like to migrate the system to a Intel SSD. Under Win 7 on another machine the process was very easily done by using Intel's Migration software. That process did not have to deal with and EFI BIOS but under the new HP it will have to deal with it. Also, I hope it will migrate the Factory Recovery partition. (The Win 7 is a home brew so there was no factory recovery involved.)
Does Intel's Migration software will take care of both the EFT stuff as well as the factory recover? If not, will you recommend a process that will do so as foolproof as possible?
I thought of creating a system image of the spinner and using the Win 8 recovery disc to restore it to the new SSD. Will that work?