Setup Installation :: Error During Updating Process - Reverting Back To Original Programs
Jun 16, 2014
I am trying to re install 8.0 using the option to re install all programs to Factory Settings. Downloads 99 programs and when it tries to do the updates it fails and then starts the reverting back to original programs. This seems never to finish.
I had done an Image backup so that I could go back to it in case of a failure.
I did not do the option to wipe the disk and then install to factory.
I also could not get my machine to use the Recovery DVD's. But did use the screens that ask you questions about recovery.
I did the recovery twice and it failed both times and never did get back to the first install.
Since there seems to be no reason for the failure in the 99 updates I am at a loss of whether I should try again and wipe the disk clean for C:/
View 3 Replies
ADVERTISEMENT
Nov 29, 2013
I tried restoring my computer using Easeus backup, but an error occurred during the restoration process. I've managed to fix it by doing diskpart /fixmbr and then using the windows dvd automated repair, however, what I ended up with is this:
So there are now two visible drives on my PC - C and Q (system reserved), and it doesn't see the data drive.
What I want to do is to make the data drive visible, and merge the C and Q drives into one (or make Q invisible), if that is possible. So, how do I do that?
View 1 Replies
View Related
Oct 18, 2013
From 8 pro 64bit (with media centre) to 8.1, tried many times, no luck, always end up getting the same error code 0x20017, then rolled back to 8, every driver has been updated and there no external driver whatsoever.
View 6 Replies
View Related
Jun 3, 2014
I recently bought a new ASUS computer, after I set it up a notification popped up asking me to update to windows 8.1
I proceeded to do this and it started to download the updates, when I returned it said "failure configuring windows, reverting changes" its been like this for the past 5+ hours, what should I do?
View 7 Replies
View Related
Jan 13, 2014
I just had my laptop install Windows 8.1 tonight. It's a clean install, by the way. Now the problem is I noticed that every time I restart my laptop it's power plan reverts back to "power saver", I had it set on "high performance" before. I own a Samsung laptop, model is NP535U3C-A01, Series 5.
Processor: AMD A6-4455
Memory: 8 GB
Graphics card: AMD Radeon HD 7500G
It stops charging at 99%.
View 6 Replies
View Related
Jan 5, 2013
I have a small computer that is simply used for email, I want to upgrade the system from Vista to Win 8 Pro, I ran the initial upgrade assistant, and it claimed it would work on my system... I bought the upgrade, started the installation (choosing to keep all windows settings and files) and during the actual installation process, it freezes at 11%.
I know that others have asked questions like this, but I don,t have time to do a clean install, can this installation be completed without having to move all of my data from this machine?
View 1 Replies
View Related
Jul 4, 2014
After upgrading to 8.1 i see two recovery partitions: Difference between each, or how to find out if i need both.
Secondly,i have a recovery USB flash drive which has boot efi and sources, but the latter is empty. Should i redo that to copy one of the two recovery partitions? (it's 3.7 GB).
Note: i also have 4 DVDs of media recovery, and a single system image on an external hard drive. Not sure how these are related to use of the USB drive,Where is the best description of a recovery process to follow in case of losing a C:drive?
View 8 Replies
View Related
Feb 18, 2013
So, I am trying to upgrade from windows 7 to 8 and everytime i begin the download it starts to go and makes it past the preparing which i see a lot of people having problems with. then it gets to the installation part and freezes at 11%. i left it to install last night as i went to bed woke up the next morning and it was still at 11% so, i decided to restart it maybe something was wrong, still nothing. Then i said to myself maybe if i start the disc from the startup screen it will work. Nope. When i did that it told me the installation process had already been started and i needed to remove the disc start up my computer normally and continue from there the way i was before.
View 6 Replies
View Related
Sep 10, 2013
I have a machine that has an activated retail windows 8 that came from the upgrade offer.
I just downloaded the 8.1 RTM from technet and burned the ISO install media to a DVD.
Will it work to upgrade the retail windows 8 with the RTM DVD by simply doing a setup.exe from within windows 8?
Will it retain the original permanent retail key after the upgrade?
Also, I'm assuming that any additional changes to the 8.1 will come through online updates so it will get caught up to whatever is released to the general public?
View 9 Replies
View Related
Nov 5, 2013
I bought a Win 8 Pro 64 bit upgrade dvd in order to upgrade from Win 7-64bit. After completion I downloaded win 8.1 pro upgrade from the store. At the end of the installation it says "getting devices ready". It starts the process showing the rate and it gets stuck at 6%. Turned off the laptop (by disconnecting power and battery) and got the following message:
".......... Could not complete the update to Win 8.1 ......... error 0x1900101-0x30018 "
I tried to install this upgrade a third time to no avail.
I checked that I got all the win 8 updates.
I did a system restore.
I updated the nvidia driver.
I checked the requirements, including CMPXCHGb support in my 64bit version, by using Coreinfo.exe.
View 4 Replies
View Related
Sep 15, 2014
Is this possible? I have a code and I've just been researching/trying to work out how to do this for the past few days with no real success. As far as I'm aware I could make my own bootable USB/disk but the windows 8.1 updater doesn't work on Vista. I thought I could maybe make the USB with my brother's PC which runs 8.1 but the program asks for the code and I'm not sure whether that would lock that code to his PC or not.
Failing that I thought I could maybe download the iso (I think that's what it's called) and make the USB without the official windows 8.1 program though I'm not sure of that either.
View 7 Replies
View Related
Feb 6, 2014
My laptop came with pre-installed windows 8 from HP manufacturer, I heard that if we do update to windows 8.1 then hardware drivers and software issues might occur.
I want to know that may I update my laptop without being afraid to lost anything or I have to stick with my current windows 8 that came along with my laptop.
View 7 Replies
View Related
Sep 15, 2014
I have a lenovo windows 8 laptop which is having trouble updating and goes to reverting back. Recently its been stuck on that screen for a long time. I did reset it but it goes to the same screen...
View 1 Replies
View Related
Sep 15, 2013
I have a Acer Windows 8 computer and its stuck on reverting update changes and restarting. It says "Failed configuring Windows Updates Reverting changes" then restarts and then does that again. I cannot go to the desktop.
View 3 Replies
View Related
Aug 2, 2014
i just got a new MSI Laptop and i downloaded some games from steam and you know that kind of stuff. Then i had to download windows 8.1 (not from disc) and then it started downloading normally and then all of a sudden this "Failure configuring windows features Reverting changes" popped up and then i just waited and waited, i waited for about a few hours then i gave up and decided turning it restarting it but it came back and again and again i could go to the password the sign would just pop back up i tried pressing f8 and f9.
View 1 Replies
View Related
May 25, 2014
I have just installed windows 8.1 on Dual Core Laptop. Just wanted to know how can I create a backup of my Windows 8.1 installation so that in future if Windows crashes I can restore the installation+other s/w installed, like we do fresh install of Windows through USB boot.
View 2 Replies
View Related
Jan 7, 2013
Is it possible to roll back to win7 from Windows 8?
I purchased Windows 8 pro as an upgrade from win7 through Microsoft so I do not have a disc. I've looked at several vids on the internet and nothing worked.
I have tried start up and recover, Windows 8 is the only system available.
I purchased my laptop with win7, so no disc or recovery disc.
I also tried setting up a vhd and boot into that, it did not work.
View 5 Replies
View Related
Sep 15, 2014
I purchased my HP Envy laptop a few months back - it came pre-installed with Windows 8. This ended up becoming problematic because as a gamer, a few of the games I wished to play were not compatible (even after scouring the net and researching a million ways to try get certain games to work).
So to cut a long story short, I did a full partition backup of all the partitions my laptop and then reformatted everything into 1 single hard drive, which I then installed Windows 7 on to. While Windows 7 works well on this machine, I've lost a few functions due to some incompatible drivers (like the amazing audio my laptop used to have, the fingerprint scanner, etc). I soon came to discover that my laptop model was specifically designed for Windows 8 and could therefore not be perfectly compatible with Windows 7.
So now, I would really like to restore how my laptop was beforehand (with Windows 8), although I am not sure how to go about doing this. I still have my full backup of my laptop's previous state. The program I used to back it up was EaseUs Todo Backup. This may seem like a bit of a dumb question, but I'm a little nervous to tamper with things I may not understand, like I did when I previously downgraded my PC to Win 7.
View 5 Replies
View Related
Jul 16, 2013
I don't know what Windows 8.1 has done to my system but after getting rid of it and re-installing Windows 8 ENTERPRISE again I cannot create Windows to GO any more
It doesn't matter if I plug in an SSD, a standard USB stick or a standard external USB HDD - I get No suitable devices found when launching the application from the control panel.
(I can do it manually the old fashioned way but I don't know why the standard method is broken when it was working perfectly before).
View 2 Replies
View Related
Jul 23, 2012
I had win7 and Windows 8 on my system. then I deleted win7 and installed a fresh copy. the boot screen is now traditional black and white boot screen where we have to choose OS. I want Windows 8 blue boot screen back.
View 5 Replies
View Related
Jul 21, 2013
I have a Toshiba laptop with windows 8 pre-installed in it. I would like to take a system image including OS, drivers and software. After that need to install windows 7 keeping windows 8 as it is. In case of failure, this image can be restored right?
If I want to remove windows 7 only how will I do it to keep windows 8 only.
View 9 Replies
View Related
Sep 5, 2013
Is it possible to change the way win 7 looks,such as the lack of the start button,and the applications as they are in win7 from the start button?
The Windows 8 came with the laptop. The only reason I am interested in Windows 8 is bitlocker.That is probably the only feature I am interested in.
View 5 Replies
View Related
Mar 28, 2014
I have a multiple operating system and used to get the blue graphical boot menu with a rectangle with the name of each operating system in it. After a few boots it went back to the text menu, and only returned a couple of times. Is there a way to get the graphical boot menu back permanently? It looks a lot nicer. I have XP, Vista, 7, 8, 8.1 .....
View 6 Replies
View Related
Jan 8, 2013
I want to make win 8 iso setup with programs pre installed, that after i install win 8 i won’t need to install those programs. I have search for that option for a long time & i have found somethings[Win8PE or Iso moust] that i don’t know if they’re related for what i want to do. i know that there is option to do that,
View 1 Replies
View Related
Jul 30, 2014
My setup is :-
Windows 8.1, 64 bit;
Asus RAIDR Express PCIe SSD;
Asus GT630-SL-2GD3-L GPU;
Asus SABERTOOTH Z97 MARK 1 Motherboard, BIOS version 0602, (the first version).
I have two monitors, a Dell u2412m which is plugged into the DVI socket on the GPU, and an iiyama XB2776QS which is connected to the DisplayPort socket on the motherboard. This was the only way I could find to get each monitor to use the maximum resolution it is capable of.
Whenever I open a program I have no idea on which monitor it will be displayed, sometimes a program will display in the iiyama, but the next time I open it I can see it on the Dell. I also find that if I switch the monitors off for a few hours, the next time I switch them on the programme might be displaying in a different monitor.
I am not sure if this is because I am not using the new, horrible, Metro style which Microsoft thought to introduce, or something else. I did try a piece of software called MurGeeMon, but this did not solve the problem.
Could it be because one of my monitors is connected to the GPU and the other to the MoBo?
View 1 Replies
View Related
Jan 10, 2013
I'm running a Win 8 Pro x64 box, with Windows on C: and most of my Applications on D:
Is there any way to reinstall windows to C: without breaking my programs on D: ? I mean, a lot of the stuff will still work without any special tricks, but the things with hundreds of hard to find registry entries concern me.
Could I possibly reinstall to C: then run a repair installation for all the programs that reside on D:?
View 2 Replies
View Related
Apr 3, 2014
The os that i have in my laptop is windows 8. Any time I put on the computer a message pop up that new update of 8.1 is available. Really I want to update to 8.1 but i don't want to loss my files and other programs installed. will it be possible to update it without losing my all ready installed programs?
View 1 Replies
View Related
Dec 10, 2013
what is the best way to install a clean version windows 8 pro without losing my files, data and programs. I want to do that because my windows 8 became so slow and takes very long time to respond. whatsoever program or browser I open, takes some time ranging 30 sec to 5 minutes!! This thing never happened before as now I get not responding message on the window of each program...
Is there a way on how to do that?
View 2 Replies
View Related
Nov 6, 2013
I reset it because i can't pin anything thing it would clear it but now all my pinned programs have gone and i can't drop them back onto taskbar It show the little arrow when i drag it there then nothing
View 9 Replies
View Related
Jul 14, 2014
I have two wifi adapters i have been trying to get to work consistently with no luck for several days now. One had been working fine for a few weeks, then it stopped, i tried switching, and that one worked for half a day, then it stopped. Once it stops working the connection is 'limited' but works fine on other machines, or it says it is connected in settings but Chrome says it isn't online. So i wanted to try to install a different driver, having read that this can often be the solution.
But in both cases, there is no old driver to roll back to, and when i try to tell Windows to load a driver i've downloaded or have on a disc, it says, no, the one it already has is 'up to date', and it won't do it. Is there some way to dig around in the system to get rid of the driver it claims is better so i can try another one?
View 9 Replies
View Related
Jan 11, 2013
I want to upgrade from Windows 7 64 bit Home edition - To Windows 8 64 bit Home Edition.
I currently have my windows 7 installation on drive C (64GB SSD)
My user profiles, Data and programmes are stored on Drive E ( 1TB HDD )
If i use the windows 8 upgrade option - What will happen?.
View 8 Replies
View Related
