Setup Installation :: Moving OS From HDD To SSD In Lenovo U410 Ultrabook
Dec 15, 2012I recently bought a lenovo u410 ultrabook that has a ssd built in. I am wondering if there is a way to move the OS to the ssd?
View 3 RepliesI recently bought a lenovo u410 ultrabook that has a ssd built in. I am wondering if there is a way to move the OS to the ssd?
View 3 RepliesI got a Lenovo U410 and it comes with 750GB plus 24GB SSD. I think it is possible to install win 8 on the SSD drive?
Also, the main reason why I'm asking is:
1) I don't have a sticker on the back of my computer with a key, and I don't know what I'd do if software asked me for it
2) It doesn't have a CD/DVD drive. Would it be possible to boot windows from external HDD or I'd need a memory stick?
Just got a new laptop which came with windows 8, It's an Asus Zenbook UX302LG. I tried Windows 8 a bit during the developer preview, but I'm really not that familiar with things, anywho. So this has a touch screen, and I've been using it a fair bit, but I'm curious about 8.1. Being the "newer" version", from what I've seen it has some improvements over regular 8 in some areas, like the apps screen looks a little tidier.
What I'm wondering though is does it also remove some of the touch features I would be using with a touch screen? Or just make them more mouse friendly. Long story short, given I have a touch screen which I am using, should I upgrade to Windows 8.1? Or will I have a better experience with regular 8?
I have an asus s500ca ultrabook it has a 24gb ssd which is being used as a cache drive and a 500gb HDD which has windows installed on it. If I wipe out the 500gb hdd and re-install windows 8.1 on it and leave the 24gb drive alone will it still act like a cache drive?
View 4 Replies View RelatedThe problem I have now is when turning on my laptop it stays at the Dell logo for about 5 minutes before continuing to attempt to load windows, this is in UEFI mode. In legacy mode, it loads past the Dell logo in seconds, but this does not load windows.
I am trying to reinstall windows with the Dell windows 8 Home premium disk. When the disk finally loads, it just stays on a black screen, and I've left it for about an hour and it will not load.
I have tried using Hirens boot CD (USB) to load Mini windows xp, but that does exactly the same. I can load Linux from the usb but not windows. However, I have never used Linux so I cannot do anything in Linux to attempt to fix it, as I do not know what I'm doing inside Linux.
I downloaded from Microsoft (so no disc) Windows 8 32bit. Didn't realise my 64bit compatible Dell laptop was not using all its 8gb of RAM then found out it couldn't with a 32bit OS.
Its just when I run some tasks like Handbrake conversion or DVD conversion processes it slows my web browsing to a snails pace and someone suggested I needed more RAM!...thus my investigating why only 2.99gb was being used.
Have I got to fork out for a totally new licence?..I can't remember if when I bought this version it asked me if I wanted 32 or 64 version!
I had a laptop running Windows XP. When Windows 8 came out, I downloaded Windows 8 Pro upgrade. I clean-installed it and also upgraded to WMC edition when Microsoft were giving this away for free.
Now that PC is kind of dying (it is about eight years old,) so I have bought myself a new one. The new one came running Windows 8 (not Pro, not WMC) OEM. I have no intention of ever using my old PC again, so my question is as follows:
How do I legally remove the Pro and WMC licences (and if required, Windows 8 itself) from the old PC and upgrade the new PC's Windows 8 to Pro WMC? I have a record of both the Pro and WMC product keys already. But how do I legally move them across to the new PC and upgrade the new PC's Windows 8 OEM to Pro WMC?
I just did a clean install of Windows 8 on a 256GB SSD. How do I move my User Profile Files (My Documents, etc.) to another drive?
View 1 Replies View RelatedHere is the deal I have 2 hdds (160 gb and 1 tb) late last night used the 1 tb as a flash drive and re installed my OS on the 160 gb drive. The "system" files are on the 1 tb drive and all other files ( boot crash dump etc ) are on the other one.
PROBLEM: while doing a cold start the system fails to spin up th bigger drive in time for the software to detect the system file on the bigger drive and it brings up the boot manager saying files are not present to load, a restart fixes the problem as the bigger drive would be up to speed by then, any work around to delay the boot till both drives are up to speed .........???.
Further i think that moving the "system partition " to the other disk will eliminate this issue ...... how do i go about doing that ... See the image below
QUESTION :if i remove the 1 tb disk physically and reinstall OS and connect it back will everything be as good as new or will it pose problems as then there would be two "system " partitions .....
how to move then resize a partition. I have a Dell XPS 12 Win 8.1 system with 7 GPT Primary factory partitions. I cloned the 256 GB mSATA SSD to a 512 GB mSATA SSD.
*** Right now my disk looks like this with (D) empty (no data):
|-OS (C)--|-Data (D)-|-PBR Img-|-None--|-Unallo--|
|-112 GB-|-109 GB--|---6 GB----|-8 GB-|-227 GB-|
|---#5----|-[empty]--|----#6----|--#7---|---------|
I've omitted 4 uninvolved factory partitions, showing only the rightmost 3 factory partitions (#5 #6 #7) and an Unallocated area.
*** My objective--w (D) & Unallocated combined--is this sequence:
|-OS (C)--|-PBR Img-|-None--|-Data (D)-|
|-112 GB-|---6 GB---|-8 GB--|-336 GB--|
|---#5----|----#6----|--#7---|-[empty]--|
I need to know what to do to get this all to happen.According to an expert Dell XPS 12 user, partitions #5, #6, and #7 MUST be contiguous in the last sequence shown, because otherwise a Dell backup program will not work, plus there are other problems.
I'm looking for partition manager how-to details, hoping to simply drag 109 GB (D) over to the right (just left of the 227 GB Unallocated area) then easily make those two a 336 GB (D) drive
My objective sequence HAS been accomplished by the expert Dell XPS 12 user mentioned above who arranged his partitions just like that, although he had different intermediate partition positions and proceeded somewhat differently. He Outlines what he did here:
How to upgrade the SSD in the XPS12 (...whilst avoiding the mistakes I made!) - Laptop General Hardware Forum - Laptop - Dell Community
I've tried partition managers' Resize/Move function with a slider, but exactly how to use the slider to move a partition eludes me.
These partition managers I've tried and have installed now are:
-EaseUS Partition Master 10.1
-Paragon Partition Manager 2014 Free
-MiniTool Partition Wizard Home Edition 8.1.1
(I've also tried its bootable CD that runs under Tiny Core Linux)
Unless I meet my objective above, I can't use my XPS 12 for work, since I need a 512 GB SSD to hold all the existing data I have.
Can i move old activated Windows 8 Pro with MC key to new computer (complete new build)? And how?
View 5 Replies View RelatedI have a Lenovo U310 Touch that came from the store with Windows 8.1 on it. I need to install Hyper-V and that requires 8.1 Pro.
I have a product key from my MSDN subscription for 8.1 Pro and attempted to use the "Add Features" program from the system screen to upgrade. It takes the code, validates it as ok, goes through some downloading and other stuff then reboots the system. When it comes back up after the reboot it states "Couldn't add features" along with a contact Microsoft Support link.
I looked around and can't find a log file or any error codes.
I've done this on 2 desktop machines to enable Hyper-V with no issues but for some reason this doesn't work on this "Ultrabook".
I've tried this on a hard network connection and on a wireless connection to see if anything changed. Still broke both ways.
The machine does have 2 drives in it, one 20GB SSD for recovery and recovery drivers and the primary drive. I've read where there may be files mapped on that drive that are causing problems, but have no clue how to actually find these and move them.
i installed windows 8.1 using pendrive after shuting down that laptop is not starting. During boot it is not showing anything.Nothing is happening even after i press f2 or f10 or f12.my laptop is lenovo g570
View 5 Replies View RelatedHow to hid all the partitions in the factory installed HDD for Lenovo Y580.
This is the scenario.
Firstly, i successfully migrated all of the following partitions:
OEM/Hidden partition,
C partition: boot drive/ program files and data drive &
D partition: containing drivers
from my Lenovo factory installed HDD to the SSD and to use the SSD as the primary boot drive . Now, i plan to use the factory installed HDD as my data drive. (I am using a caddy tray for this whereby i plan to swap out the optical drive and pluck in the Lenovo factory installed HDD). However, for "safety reasons" i do not plan to re-format the entire factory installed HDD but rather to keep those partitions just in case if my SSD fails.
Hence, how do i turn all the three partitions above (in the Lenovo factory installed HDD) to become dormant? I want the computer to boot up from the existing SSD but then to treat the factory installed HDD as the data drive and not to read from any of the three partitions in the factory installed HDD.
I am planning to use EASUS as my disk partition freeware.
I was having problems getting to the boot menu of my Lenovo G580 laptop earlier.
I figured out how to get the boot menu - But my only options are hard drive, LAN v4 and LAN v6 boot - Nothing about a disc. So I went into the BIOS boot priority menu and set disk to #1 - It still booted to my hard drive!
I am trying to Boot to Boot Menu so I can select CD rom so i can Ghost image my wife win 8 laptop, the problem is Win 8 wont let me access the boot menu and i am not sure what to do. The brand new Laptop came with HHD and i want to capture the image via Ghost and then put the Ghost image in SSD ...
Laptop is : Lenovo G505
I tried to set up a dual boot, Windows 8.1 and Linux Zorin 8 on a new Lenovo desktop. I setup the partition first in Windows and then loaded Zorin per the instructions here: [URL].....
Everything seemed to go OK but in the end I didn't end up with the grub boot loader, so I can only boot into Windows. Now I ended up loosing 20% of my hard drive which is now unallocated space that I can't figure out how to reclaim into my hard drive. I tried deleting the partition but it's still there and there was no option to expand volume.
My friend put his Lenovo desktop to sleep, and when he woke it up, it was at one of the initial setup screens that you see when you first turn on a new computer, or first install Windows 8 - the screen that asks you to accept the Express Settings or to customize the setup.
We could not get out of it, and restarting the computer brought it right back there. So I accepted the Express Settings, then it asked me to enter the Microsoft account info, or to create one. He had a local account only, so I kept denying that screen and finally somehow I ended up at a screen that said something like "use my existing account" although it showed no indication that there was any account.
It then said it was installing my Apps (there are no Metro Apps in use on this computer, other than what comes with Win 8). This took about 3 or 4 minutes, then it did some more setup, and when it was done it was (surprisingly) back at his desktop screen, with all his files and desktop icons just like they were before.
I have a Lenovo Z710 laptop(see spec's)and want to make a recovery USB and also setup a backup system. This is a new machine and I don't want to make a mess of it.
I have a 32GB USB drive to make the Recovery on.Lenovo refers me to this method to make a Recovery USB :Methodology to create Recovery Media and reload a Lenovo Think system with Microsoft Windows 8 preload
Is this a good way to do this or is there a better way ?
I also need to setup a backup system, what is the best program to use for this, paid or not ?
I have a 1TB HDD in an external enclosure with 3.0 USB cable to use for the backup's.
I bought a new XPS 13" Ultrabook this year and all worked fine. However, all of a sudden the laptop does not boot anymore. I am wondering if there is a way to reinstall windows 8 or to recover everything? I made I diagnostic check (F12 when booting) but no errors are found. However, my problem is that the laptop has a) no CD player and b) I also have not received another device like a USB stick with the software with the laptop. How can I reinstall the system?
View 1 Replies View RelatedI just got a new ASUS ultrabook (this week) that should be quite fast given the config (see config at the bottom). It is very fast indeed for internet browsing, video games etc, except all windows related tasks. Main examples:
- Opening a new folder can take 10 to 20 seconds
- Opening windows settings takes approx 15 seconds
- Opening a picture (!) takes approx 15 seconds and can make the computer freeze for a while
Something else I noticed: when I want to check windows updates, it doesn't seem to find any, but it doesn't tell me this; instead it just keeps looking for updates without ever ending.
Also as I said everything not windows related is very fast, I can open 30 tabs on chrome without any problem etc.
My suspects :
- A virus (after a week only??)
- Some of the stuff ASUS installs by default on their machines
My config:
Brand: ASUS Zenbook UX302LG
OS: Windows 8 Pro
Processor: Intel Core i7 4500U Processor
Memory: DDR3L 1600 MHz SDRAM, 8 G
Graphic: NVIDIA GeForce GT 730M 2GB DDR3 VRAM
Storage: 750GB HDD With 16G SSD
Antivirus: McAfee (installed by default, will change it asap)
I'm using Samsung Ultrabook Np-530U4C-S01. Here is tech specs. (using Windows 8, not 7)
[URL]
So when i start my computer it has avg 2.5 GB memory. Here is task manager SS:
high ram usage problem - Imgur
So why is that?
Using Windows 8, machine is 3 months old. HP Ultrabook. Wifi had been working fine until just now. There are over a dozen WiFi networks available, but my laptop says 'No networks found'. Other laptops have no problem connecting.
View 8 Replies View RelatedMy new HP ultrabook was doing updates ... And it came up with the screen saying Failure installing updates reverting changes do not power off however its been saying this for 4 hours and i can not get out of this i even attempted to power it off and upon powering it on it comes straight back to this screen!
View 1 Replies View RelatedI have a Dell Inspiron 15z Ultrabook which has a Synaptics Touchpad, and after Windows 8.1 Upgrade, I lost the two finger tap right click feature, which worked fine previously. There is no option for it in the Dell Touchpad Settings, and after a Registry edit (Synaptics Clickpad - Right Click not working after windows 8... - HP Support Forum - 3053281) and Synaptics driver update, I got the feature back, except this time, when I tap with two fingers, it clicks both left and right, instead of only right (all other touchpad gestures work perfectly). I also tried the Two Fingers Scroll app, but did not like it.
View 8 Replies View RelatedI have a Dell XPS12 Ultrabook (amongst other things) and out of the blue a white line of pixels popped up on my desktop. It is there no matter what windows or programs I have open through the desktop however when I go to the start screen or open any other tile it goes away....I've tried restarting, changing the resolution, etc and can't make the line go away. Its still under warranty if it was the screen, but in the past my experience with blown out pixels (white lines on the screen) has been a screen replacement because its there no matter what....this goes away in the start screen or any other tile.... None of my other laptops/tablets with windows 8 have done this before.
View 9 Replies View RelatedI was installing Windows 8 at my desktop pc.Suddenly power cut occured and it caused the compute to shut down.Then when I restarted my pc again a messege appeared saying that the installation has been corrupted and it can't be continued and it doesn't log on.After that when I tried to re-install Windows 8 the setup got stuck at the "setup is starting" window.I waited overnight for it to go and the installation to start.But it doesn't happen.I have tried to re-install several times but the same problen happens again and again.So neither I can log into my computer now nor I can re-install windows.I don't know what to do.
View 9 Replies View RelatedHere: [URL] .....
Somewhere in that link it says:
During POST enter "BIOS Boot Selector Menu" by pressing F7.
Intel says: <F7> No uefi setup option in boot selection
Others say: <F8> No uefi setup option in boot selection
I say: <F12> No uefi setup option in boot selection
Lenovo Z580, my brand new laptop that is, its UEFI based and vymrdal's ISO from MSDN is also created to be installed as an UEFI Install.
Here's my issue; I am a math and science teacher in a public middle school and am outfitting my class with thirty brand-new Lenovo touch computers. I consider myself above-average savvy with computers, having worked with every version of Windows extensively since the late 80s and DOS. The only OS that I haven't spent much time on is Windows 8.
These computers are all brand-new and of course have legal copies of Windows 8 -- irritatingly, though not yet updated to 8.1. Soo...It took me a larger part of one day just to get ONE of these computers ready for class use. It involved several stages of the Windows update/reboot dance, followed by removing myriad unneeded bloatware applications, setting up multiple child accounts on the machine, and finally installing some freeware educational materials needed for instruction. It was all unbelievably tedious!
I turned around and look at all the remaining twenty-nine computers with dread. Obviously I'm trying to work out some kind of shortcut to avoid having to spend my whole summer updating each of the new machines individually. In an ideal world, I would make some sort of image of the machine that I just spent several hours updating/configuring, and then replicate that across the other twenty-nine. In terms of hardware, this shouldn't be a problem since all of the machines are exactly the same make and model. But I anticipate other problems such as, for example, the serial number of the Windows version and the computer name will then be the same on all the machines and have to be adjusted. There very well could be other issues with replicated serial numbers, etc.
I'm thinking maybe I just have to bite the bullet and work at each individual computer one of the time. And then image them individually so that when the kids mess around with them, I can do an easy restore. How I could make this work?
When I run setup I get this message:
"Something happened, We can't tell if your PC is ready to continue installing windows 8. Try restarting setup"
What can I do?
I have a Dell Inspiron 7720. I have created an uefi bootable usn flash disk with rufus 1.4b
I'm trying to boot from it so i can create a Windows 8.1 uefi installation and the problem is that the usb flash disk wont boot.
I have secure boot enabled and legacy option rom disabled.