I have an HP Envy and I would like Windows 8.1 to prompt me for a password both after I close (and open) my laptop lid and after waking it from sleep (Which it automatically does after 3 minutes of inactivity), however it only prompts for password after opening the lid (even if only closed for 5 seconds), and not after waking from sleep without a closed lid.
here are my settings:
I know all the settings, both in power option and advanced section all settings are set to "do nothing" when closing the lid, but when i close the lid and open it later it turns on, in fact it was neither on nor sleep, power cable is connected always.
I have hp probook 4520s and Windows 8 x64.
I recently reinstalled Windows 8 completely because I bought an SSD for in my laptop. I exported my power plans I used before the reset (when Windows was still on the HDD) and imported them again after the reset. In every power plan, Windows should go to sleep mode when closing the laptop lid, but that's not what's happening. Instead, Windows shuts down entirely, but the power light on my laptop indicates it's in sleep mode (flashing slowly). I also tried the built-in power plans (after just adjusting the appropriate setting), but the same happens. When i change the setting to do nothing (instead of going to sleep mode), it acts like it should: it does nothing.
I refreshed Windows but even now I recently reinstalled Windows 8 completely because I bought an SSD for in my laptop. I exported my power plans I used before the reset (when Windows was still on the HDD) and imported them again after the reset. In every power plan, Windows should go to sleep mode when closing the laptop lid, but that's not what's happening. Instead, Windows shuts down entirely, but the power light on my laptop indicates it's in sleep mode (flashing slowly). I also tried the built-in power plans (after just adjusting the appropriate setting), but the same happens. When i change the setting to do nothing (instead of going to sleep mode), it acts like it should: it does nothing.e problem still remains.
I had this problem and so have tons of other people looking for a way to fix it. You close your laptop lid only to discover - sometimes.. not all the time, the PC will not wake up from sleep. Hitting buttons, moving the mouse, nothing works. You wind up hard booting the system to get back in.
My solution involved checking that Sleep mode under Power Options was actually activated to begin with. People don't want the PC going blank on them so they set all options to Do Nothing under "Change what happens when I close the lid". This is the wrong thing to do. I had everything set to Do Nothing. What should have been checked was Sleep. This will put the PC into sleep mode and you can wake it up by moving the mouse.
However we don't want it to work this way. We want to close the lid and have the PC not go into sleep mode at all. Even if under "Choose when to turn off the display" and "Change when the computer sleeps" and all your power plan settings are set to "Never", some PC's will still give you a black screen when you close the lid as if your going into sleep mode. As if something is clearly not working. It's not really going into sleep mode. It's fooling you. It's wonky. I have been unable to determine the cause of this but if actually activating sleep mode fixes the problem, then so be it. The next step will be to get out your shotgun and blast the sucker - nobody wants that.
Because this sleep mode did sometimes work under "Change what happens when I close the lid" with all settings set to Do Nothing, it seems that the bios or some hardware based function is controlling what happens when you close the lid. Choosing to activate the sleep option from Windows seems to override that function. I could be wrong about what is actually happening here, I'm just going on appearances. I'd rather my display never darkens at all even with the lid closed but I'll take this fix for now.
Windows 8 FILE EXPLORER has begun prompting me that it "can't find" or items "do not exist" when I try to manipulate the files in any manner. Of course they DO exist and oddly, if I repeat the command, the job gets done.
So...the functions seem to work, but I must repeat them and deal with this pesky prompt.
I am reluctant to use System Restore as I have made some time consuming changes to my OS since this problem started and do no suspect it will be successful.
scannow did not find any errors.
I use Firefox and am 64 bit.
I have a new laptop with Win8 on it and because of where I take it to I would like to protect it with a password in case it gets stolen. How do I set it up so when I turn it on I need to enter a password to allow it to boot up or get into it once it's booted up?
View 3 Replies View Relatedim getting random command prompts showing up then disappearing, and sometimes disabling my desktop and not allowing me to browse through folders saying paths dont exist, was able to sign out and back in to my account and was able to quickly open chrome to download hijackthis, and to post it to here. my problem is, i dont understand what it all means.
I have an hp laptop with windows 8, everything should be updated, and my spybot shows no problems.
Logfile of Trend Micro HijackThis v2.0.5
Scan saved at 1:30:40 PM, on 6/26/2014
Platform: Unknown Windows (WinNT 6.02.1008)
MSIE: Internet Explorer v11.0 (11.00.9600.17126)
Boot mode: Normal
Running processes:
C:Program Files (x86)Norton Internet SecurityEngine21.3.0.12NIS.exe
C:Program Files (x86)Spybot - Search & DestroySpybotSD.exe
C:Program Files (x86)CyberLinkYouCamYCMMirage.exe
C:Program Files (x86)CyberLinkPower2Go8CLMLSvc_P2G8.exe
[code]....
Every time I move files on my portable hard drive, it says it needs administrator permission to continue. I click yes and it works, but it consumes a lot of extra time every time I move files from one folder to another. How can I stop this from asking every time?
View 6 Replies View RelatedI have Windows 8 pre-installed on an Acer laptop. I have a specific password that I use on start up. However, I turned off the computer without using a proper shutdown and somehow the password has been changed because the computer will not accept the password I have used from the very beginning.
Unfortunately, although I live in Vancouver BC most of the time, I am currently in Basel, Switzerland until the end of May and I believe any record of my Windows 25 character code is in Vancouver; thus, I doubt I'll be able to restore Windows until I get back there.
I've been reading your forums and I gather that getting into safe mode in the Acer in Windows 8 is not easy. I've tried doing it the way the documentation says to no avail. I am able to get to system settings but do not find any way to bypass the startup password code.
With all the fiddling around I have done, now the cursor arrow doesn't show and I have to use <Tab> to move around the screen to restart. I restart with the <Shift> key down and that gets me into a mode where I can troubleshoot.
I removed the password login screen on my wife's Windows 8 laptop, so the laptop boots up to the Desktop with no login requirement. She no longer has Administrator privileges. Control Panel/User Accounts show a password protected Administrator user and Local Account Password protected Administrator user.
I want to run Chkdsk since her HD has a read sector problem but need full Administrator privileges to do so.
How do I restore the password protected Administrator logins?
as I use for my other laptop? Or would there be a safety issue and would it mean that the two laptops would have the same Microsoft account?
View 9 Replies View RelatedI did some of the elevated command prompts to rid of my limited access in wifi but nothing worked!
View 2 Replies View RelatedMy laptop wouldn't accept my password, I tried about 9 times. Then I got a box stating:' You need a password reset disk', but how do I do/get that?
View 4 Replies View RelatedI have a Windows 8 Pro Laptop by ASUS. I have been using Windows 8 for like 6 months now and yesterday I shut down the laptop like I do normally and in the morning when I switched it on, it asked me to enter password like it always does.
One thing I noticed is that the lock screen wallpaper was removed and it was blue, it was not showing my Microsoft Account picture. Now when I entered my password it took more time then it normally did and it showed "SIGNING OUT" and returned me back to my lock screen. I'm confused, I have entered the password for like 100 times.
- I can't enter safe mode.
- "Ease of Access" and "Shut Down" buttons on password screen are not working.
*Asus X401U
*AMD Processor
*350GB Hard Disk
*3GB Ram
AND IT HAS NO CD-ROM SO I CAN'T FIX IT THROUGH WINDOWS 8 CD.
Every time i turn on my laptop, my password field is automatically filled with asterisks(*****). Not just few asterisks but the entire password field is covered till no more character is allowed. I have to press and hold backspace key for some time to empty it. The Laptop is Sony Vaio Windows 8 and works just fine apart from this. Yeah, sometimes it automatically fills those asterisks if i click on empty field, for example search field in "my computer". I scanned the Laptop with Avira and Malware Bytes but they found nothing. I even tried "System Restore" but the problem is still there. The Problem appeared suddenly out of nowhere. I didn't install anything and I haven't even connected it to the internet.
View 9 Replies View RelatedI see the write-up on how to make a password reset disk on a USB flash memory stick. But is there a way to make a password reset disk on a CD?
WHAT I DID:
1. Inserted a blank CD in the optical drive.
2. Opened control panel and clicked "User Accounts". But in the left panel there is no option "Create a password reset disk". All I see are:
Control Panel HomeManage your credentialsManage your file encryption certificatesConfigure advanced user profile propertiesChange my environment variables.
Do I HAVE TO insert a USB stick to see the password reset option? (I don't have a spare USB stick to test with)
Running Win 8.0 on a Dell Studio 1537 laptop.
The Mail in my Windows 8.1 keeps closing itself. No matter how many time I clicked it open, it closes itself.
View 2 Replies View RelatedI like to watch videos on my left monitor while using windows 8 apps on my second. The only problem is that as soon as I interact with the monitor I'm watching the video on the app on my other monitor closes and it goes right to the desktop.
View 1 Replies View RelatedI've just installed 8 on my Dell OptiPlex 380 at the office and I've noticed that randomly, file explorer windows will close on their own - even when I'm not actively working with them. The same goes for file copy/move operations.
I first thought it might be that the external hard drive was losing connection but now I've noticed it when working with local drives and when browsing my documents folder. No error at all - the window simply disappears. If the it's a copy process, the file will be partially copied so it's definitely ending the process and not just hiding it.
For the record, this existed from the first second I installed it, before I even installed any software.
t i am fed up with the constant error messages since i upgraded to Windows 8.
I have run through several of the suggestions posted here but to no avail.
I have followed the instructions regarding the SF thread and will upload the zip file created.
In Windows 8.1, Modern UI app processes continue to run after I've closed the actual apps. I don't know if this behavior is intentional or not, nor do I know of any way to prevent it. I know in Windows 8.0, just about all apps stopped their processes after you close them. So why the persistence now in Windows 8.1? Caching/speed improvement? Is this unique to my system or is there a setting that can stop this behavior? I'd test part of this myself, except I don't currently have access to my other systems at home.
System details:
Windows 8.1 x64 fully updated via Windows Update
All apps fully updated from Windows 8.1 store
Problem on some or all of our 8.1 devices.
We have a user without local admin rights, whenever he changes location or between wifi/lan on the office he gets an UAC prompt, it doesn't say anymore then "Network" but i assume it is for network profiles.
Why and how to get rid of it? it is an domain account with a microsoft account attached to it, syncing skydrive and som stuff.
I am really used to using Alt-F4 to close the current application. I just bought a Toshiba C855 (windows 8, of course), and when I press Alt-F4 to close IE10 (the one I launch from the desktop, not the "app", although I'm not sure yet what the difference is), I get the "second screen" thing coming in from the right. It tells about choosing what happens to a second monitor connected to your system. I also get this screen when I press F4, so it seems like the whole F4 thing has been re-directed.
Every guide and manual I've seen so far says that Alt-F4 works to close an application, so why isn't this working that way?
How do I properly close the Desktop app?
View 6 Replies View RelatedF4.I really disliked the fact that a slip of the hand that results in me pressing F4 means closing a window, so I went to BIOS mode and added the prefix of 'Fn +.' So I pressed F4 to try it out and it performed the exact same function. So naturally I tried pressing Fn + F4 and it did the same thing. I'm pretty irked that F4 = Fn + F4.
So the question of the day is: how do I prevent F4 from closing my window? I don't want to disable it completely because I want to attach another hotkey to it (ex: F4 = go back one song for a music player.) If I wanted to do that, I would've used Sharpkeys.
How can I keep folder settings after I close window or switch to a new folder. Such as "Size All Columns to Fit"?
View 1 Replies View RelatedI tried booting up my PC which has Windows 8 installed and it was working fine until yesterday.
It has a "Enter Password" screen upon start-up and I think it's a virus because it only lets me enter 10 characters and even though, I do put in the correct password, it still says it's incorrect. The computer also shuts down after 3 unsuccessful attempts.
I have attached a picture of the screen.
I mentioned not so long back that the chrome browser was closing after being opened and then getting a report that Chrome did not close properly! So after many weeks of this, I decided to return to firefox, in spite of the so called spyware.
Just now, I opened Firefox to do a Google search for somewhere, and - it shut down. When I reopened it, it opened on the page that had crashed. Google search.
So, it either not just chrome, or its a google thing?
Hey I just got a brand new Dell Inspiron with Windows 8 (got it yesterday). In the power options I have the settings set to sleep when closing the lid of the laptop, but the computer seems to always turn off. When I open the lid, my computer is completely off and I have to press the power button to turn it back on and wait for windows to reload.
This is not a battery problem as it happens even when plugged in. I have also tried using the command prompt "powercfg /hibernate on" but it hasn't fixed anything.
I have my Windows 8.1 PC's password policy set so that a password is not required when waking from sleep/shutdown. I used to be able to wake the PC from sleep and not put in a password, and I could turn the PC on after a shutdown without having to put in a password either. Since last week, though, when I turn my PC on, it will boot to the Windows loading screen and after loading for a bit, it will jump into the login screen and immediately report a login error that the username or password is incorrect. This happens before I even get a chance to type a username or password. The fact that I have to type in the username and password is strange because I have the PC set to bypass that option.
View 3 Replies View RelatedI have Windows 8 Pro 64 bit. My computer was running fine until about 1 hour ago; now there is more lag. Substantial slowness when it boots up, small lag between my typing and what's seen on screen, lag opening and closing programs, etc. I can no longer use Dragon NatuallySpeaking because the computer is too slow.
This is not due to bloatware or too many apps--It happened suddenly (computer started slowing down right away). I have not installed any new programs. I have tried both shutting down and restarting my computer.