I've ran the Microsoft baseline security analyzer and it tells me the following:
Incomplete Updates A previous software update installation was not completed. You must restart your computer to finish the installation. If the incomplete installation was a security update, then the computer may be at risk until the computer is restarted.
I've restarted my computer several times and my computer says everything is up to date and completed?
Windows 8 itself is updating fine using Windows Update. However, it doesn't provide updates for Office and other MS products. Where it says in the WU dialog box "You receive updates for:" it indicates "Windows Only." Going into Windows Update settings does not offer the "Microsoft Update" option that is available in windows 7. The link to "find out more" about updating other MS products takes me to this very unuseful page: [URL]
I know from seeing others' screen shots in this forum that updating for other Microsoft products is not disabled in Windows 8. How do I update Office (I know there are new sucurity updates for Office that were released today and I'd like to have them!)?
I have a customer that brought in his windows 8.1 machine because after responding to a "Call from Microsoft" he let them into his computer. I would like to preface this with the fact that in the pact he has indeed let the real Microsoft into his machine to assist with 8.1 setup so I don't think he realized until too late that it was a scam.
I haven't seen this type of lockout since the days of windows 2000. I cant even boot with a cd. I have checked and reset the bios to no avail.
Today I noticed that I could not access the Internet on my Toshiba laptop. It is not the computer I use everyday, so I did not need to get on the 'Net. The last thing I remember doing was Using the Shutdown and install updates command.
To remedy I had to use a Restore point. I used the one for May before the updates. Now there is no problem.
I have 2 Microsoft accounts. I have enabled 2 step verification for both of them. With one account, I was able to enter my cell phone number to complete the process, so I would receive a text message if a device I haven't set to trusted tries to log in to that account. I tried the same process on the second account, and whenever I try to enter the same cell phone number, I get an error page that the service is 'temporarily unavailable'. I have tried every combination of entering the cell phone number that I can think of, and nothing works for that second account.
With the first account, I was using the Opera browser to enter the information. With the second account, I was using IE 10. With the second account, I get an e-mail with a verification code if an untrusted device tries to log in. This is OK, but I would prefer to receive a text to my cell phone instead, as I do not always have such instant access to my e-mail account.
Or can you not use the same cell phone number for 2 accounts?
Edited to add: This is the exact message I get when I try to have MS send a code to my cell phone:
There's a temporary problem with the service. Please try again. If you continue to get this message, try again later.
I've been doing some research online this evening, doing a search with that message. It looks like this is pretty hopeless. Once people see this message in relation to any MS services, there seems to be no solution for it. I guess I should just be grateful that I at least haven't been locked out of my Windows Live account entirely, since Windows 8 is so tied to being able to connect to one's Microsoft account. Of course, the account I use for my throw-away Hotmail account works just fine.
The format I've used for the phone number is (XXX) XXX-XXXX . I've tried variations of that with brackets, spaces, and hyphens, nothing works, but at least e-mail verification still does.
Which registry settings should I change to set the top two default Windows rules back to 'Unrestricted' ?
I set up some rules in the local security policy some time ago when there was fuss in the news about the cryptolocker virus. They looked a lot like the rules above (I found that screenshot online as I can't take one myself, read on..)
Today I was installing some software that wanted access to the areas I restricted. I temporarily disabled the rules, then re-enabled them. Being a dumbass I also set the top two rules (which are Windows default rules) to Disallowed!
Over the following 10 minutes various aspects of my PC stopped working, telling me that the local security policy prevented access. I couldn't even get into the Control Panel or the Local Security Policy screen to change it back, once I realised what I had done. I rebooted the machine - it won't come back up
I've tried a system restore by booting from the installer on USB (which did not work, it grumbled that it could not restore due a file locked by anti-virus) so I think I've got two options:
Refresh my system using the Windows 8 tools - but I suspect that might leave the LSP rules in place, as it retains my settings & preferences.Hand edit the registry to correct the settings.
Option 2 is looking best, I can get into RegEdit from the recovery console, but I'm not sure what to edit and what to set it to? This is on Windows 8.1 Pro...
I purchased a new ASUS LAPTOP which came with windows 8 installed. When i tried to restart after installing Gtalk i got this message.
"Failure configuring windows updates. reverting changes. do not turn off your computer ".
I got this on last friday i.e the 6th of june, ever since i am not able to do anything with my laptop. I don't have windows 8 dvd as well. How do I reboot it?
Model number : Asus 15634 Laptop Intel Core i3 .
I also tried pressing the power button for 15 secs , still no luck. Tried f8 f9 and windows + r and windows+ X keys no luck.
After a BSOD and utter failure to boot (presumably a critical OS file damaged) I ran the recovery tools for a total factory reset.
Connected to the internet and worked for an hour or two, then tried a reboot. Windows update had 104 updates to process. It did them, then "Failure configuring Windows updates. Reverting changes. Do not turn off your computer"
This should take half an hour. After 90 minutes it has rebooted 5 or 6 times. It keeps reverting to the same "Failure configuring Windows updates. Reverting changes. Do not turn off your computer" message. Looks like it might want to reboot through each of those 104 updates.
I'm going to repeat the factory reset and the FIRST thing I will do is disable updates. I'm going to see how long I can work without any updates.
I just reinstalled 8 on a ssd and tried to install 8.1 from the store but it says i need to update windows first. I tried running windows update but i get an error saying "Windows could not search for new updates" error code 80240440. I tried everything I could find online and nothing seems to work. I tried restarting windows update, i tried turning off firewall, I tried reinstalling windows again and selecting "check for updates online" before installing from the cd, i tried running a check disk, and there is absolutely no program installed on the drive other than windows.
I came to some trouble installing CorelDraw software which apparently uses for it's setup launcher web active container performed by IE core. If I launch setup, the setup windows is evidently noninitialized showing the top warning band about active content being blocked for security reasons. Even allowing active content by selecting from the top bar menu doesn't make the setup continue. So now I'd need to temporarily bypass all IE's security checks, ie. allow everything. What I already did was browsing the security tab in IE options and allowing most of the choices in branches ActiveX controls and plugin modules + Scripting (Local Intranet). On Advanced tab I have checked in Security branch Allow execution of active content from CD discs on this computer + Allow execution of active content from files on this computer. Nothing of these affecting the installer to run (ie. I still see then active content blocking bar).
o.k. long story short before installing 8.1.1 in my real environment i tested it out extensively in vm. i found out that if you get past a certain point with the windows updates bitdefender will not install, if you install bd prior to a certain point it installs and works great even after you do the rest of the windows updates. How to get it installed and working correctly in a fully updated 8.1.1? i have eset smart security in, but i'd rather have my bitdefender.
I have had to system restore 3 or 4 times in the last week or so as Windows 8 refuses to boot after installing the latest updates discovered from the last couple of weeks (though some are from December 2012)
I have unchecked all the current updates and have decided against installing them as they seem to be preventing Windows from booting.
Pattern - "Restart to install updates"
Restart locks on the start screen - Restart again and locks again (repeat this process 3x)
"Windows is automatically repairing..." - Fails
"Windows must restore settings to a previous time..." - Usually succeeds, sometimes fails.
Then I can get back into Windows.
As soon as I install these updates, I won't get back into Windows until I system restore since before the updates and my build won't remain stable unless I prevent Windows from installing these updates.What could be going on?
They are quite big updates (totalling ~740mb and have all been discovered in the last week or so though some date back to late last year)
My laptop started installing updates when I powered down for four hours I have had this message on the screen - keep your PC plugged in until this is done. Installing update 17 of 24.....
How long do I leave this or can I power off and try and restart?
I was reviewing my windows updates and saw two optional updates that were pending. First one was for MS office and it went through fine. Second one was some update to AMD vision control center. During that update screen flashed couple of times and went for re-start. After that I am unable to get into the system. I tried safe mode/debugging/low resolution mode etc.. But all resulted in the same blue screen with the 0xc000021a error message.
I am able to go only to command prompt. Nothing else (fortunately I am able to backup my photos by connecting external hard drive and using command prompt). I checked the SRT log file but it doesn't say any issue. All passed.
I tried refresh PC but it came back and said "There was a problem refreshing your PC. No changes made".
I tried using win ISO image bootable flash drive. It couldn't get through me in (I just tried with PC repair option when I booted with ISO image).
Is there a way I can get over it without re-installing?
I am currently having an issue on my laptop at the moment where it's stuck in an infinite loop of 'reverting changes' after having tried to update and failed at 30%, I have done some reading at ways to boot into safe mode however it would appear windows 8 doesn't give me the chance.
I do not have a copy of my original windows 8 disc and am at a loss!
I have tried spamming F4, F8, F10 buttons and none are allowing me to enter boot mode.
So I restored my system because I had no other choice from it not booting before and it was working for a day, then when I restarted it said 'installing XX / 93 updates' so I let that run, and when It finally finished, it restarted said 'configuring windows updates XX% complete...' and then it suddenly said "Failed to configure updates. Reverting Changes." and then it looped this by restarting, trying to configure them, and then saying "Failed to configure updates. Reverting Changes." again...
I've got back into safe mode, what should I do to make it update properly again?
Someone suggested toggling "Secure Boot" in the BIOS, is that worth a try?
After I installed Windows 8 I started having the "0 KB Total, 0% Downloaded" issue while attempting to update, sometimes it does work, but most of the time it doesn't
I'm constantly trying to update my Windows 8 but I'm unable to do so, because everytime I try to update it, it fails to install because of an errors. To be specific, its two updates with different errors 8007371B and 80073712.
Those two updates are the only one showing up. Their id is KB2856373 (Update for Windows 8 on x64 CPU's) and KB2781197 (Security update for Windows 8 on x64 CPU's).
I have already tried sfc, chkdisk, Windows update diagnostics from Microsoft website, resetting the services, Windows build-in tool to fix Windows update errors and nothing worked.
So some background. I had issues with being able to install ANYTHING from an MSI file. Then I wasn't able to install any updates from Windows Update. I then reinstalled Windows, and am now facing the same issue after a few days. I would rather not reinstall yet again.
I tried doing System Restore, but it just hangs. Windows Installer hangs on "preparing to install".
I just bought new Asus Vivotab Smart Windows 8 tablet, after the very first windows update it failed to install some of the updates, and then after the reboot I am now stuck with the message "Failure configuring Windows updates, reverting changes".
It never gets any further than this, it never reverts, I have left it running for an entire day and have restarted several times.
This is a tablet, so there is no keyboard so I cannot press any F keys to get into recovery mode, and no CD to boot from etc.
When I run Check for Updates it just hangs. It says it is checking for updates and green progress bar is repeatedly running across, but nothing happens.
Before this problem arose I had just run disk clean-up including remove installation files and windows updates. The disk clean-up process removed about 59 GB including a large Windows.old folder.
I upgraded to Windows 8 from XP about 10 days ago. Windows update was working fine until the disk clean-up. I ran Check for Updates frequently after the upgrade to make sure I got all the updates, it worked perfectly well for both update and install.
I have tried Checking for Updates several times since running disk clean-up.
First time I ran it I had this error message: Windows Update error 0x8024a000 (only seen that one time)
I ran the Update Troubleshooter after that and it found/fixed the following:
Potential windows update database error detected 0x80070490 -Fixed Windows update components must be fixed - fixed
The troubleshooter did not resolve the issue. I have run Check for Updates many times since with no more error messages, but it just hangs. When I run the Update troubleshhooter it fixes the same two issues as above.
Since the disk clean, Windows Update shows:
Most recent check for updates - Never Updates were installed - Never.
As my Windows Updates were previously all succesfully installed, the history must have been cleared.
No error messages have been seen since that first one which has not repeated.
When I was having problems with KB2975719, and going thru solutions, it drove me nuts trying to find if I had certain updates installed from the Installed List in Windows 8.1 since they are not in numerical order. (Contol Panel >Uninstall A Program > View Installed Updates)
I finally figured out where to find a numerical list which I could check much easier in determining if the updates required in some solutions were installed on my pc.
1. Install Belarc Advisor
2. Run and open Belarc Advisor
3. At the bottom of the opening page of BA, click on "click here to see all installed hotfixes" - a numeric order list.
4. Just to be sure all were there, I printed this list and manually compared it to my Control Panel Installed Updates one time.
I then had a numerical list to compare to all the KB's required for installation of KB2975719. Much easier for this simple brain than remembering a number and looking for it jumbled list.
I am trying to get things going with my Dell Venue 8 Pro, and I go through the initial setup fine. However, when I do Windows Update the network fails to connect after the following reboot.
When I look at the device/driver, it says it is working, but when I do a network troubleshooting it claims it must be a bad driver.
The driver doesn't seem to have been updated, based on the fact that the button to roll back is grayed out.
When I do a restore of my system, it works again until I do the Windows Update.
I have done this a couple of times, once with all updates, including the optional updates, and once downloading only the critical and important updates.
Other than doing each update individually, is there a reasonable way to figure out what is causing my issue?
I am running 8.1, and firefox 25. I can't download or run Avast, or download any executables, suddenly. I lowered my security settings to Medium and added Avast to the firewall permissions, but to no avail. My download settings were already at "prompt" anyway, so there's something deeper I can't figure out. I'm a reasonably competent generalist but not super computer smart.
Is it normal for Windows 8.1 to show "Applying Updates" after a BSOD crash? I saw this happen on my desktop earlier this week and now on my laptop. I checked the update log and there was no update applied immediately after the crash.
I don't see any option to hide the updates which you don't want to install. In windows 7, one can simply right click and choose hide the update, but no such thing in windows 8.1.
