i just bought my asus vivobook s400ca-dh51t 14 inch touch ultrabook and after a month of using the multi gesture suddenly it stopped working, i checked the mouse setting but i cannot find the device setting for the touch pad..
View 2 RepliesHow to disable the edge gestures, touchpad only, for all users on Windows 8.1. Here's the scenario:
The laptops are touchscreen. You use the touchpad to move the cursor around and the Edge gesture is triggered (charms, recent apps etc)....
There are hundreds Windows 8.1 laptops that will be put into production soon. The master image has already been created and installed on all of the laptops by the manufacturer.
Each laptop will be used by several different users for testing, so disabling the gestures per computer per user/profile would be quite difficult.
Model: Lenovo E431
Mouse: ThinkPad UltraNav pointing device
Driver: Synaptics 16.6.4.13
I haven't found a way to do it via group policy or the registry for all users.
The touch screen keyboard click sound suddenly reduced loudness. This is happening on my DVP 11 running win 8.1
Used to be much louder, then this afterneed it just went soft on me. Is there a setting somewhere to restore the keyboard click loudness?
I don't know why but my external hard drive isn't showing up when connected.. Windows makes the connection noise when I plug it in but it don't show up in disk management, device manager or anywhere else... If I plug it into a regular usb port it works fine... And its a usb 3.0 capable drive it worked before....?" I tried the new hardware wizard in device manager and didn't see anything... drivers all look fine....
View 4 Replies View RelatedI have a dual boot Win 7, Win 8 setup. Suddenly the audio has stopped working on Win 8. (Works fine on Win 7) I checked for driver updates, even "installed" an old driver which didn't actually install. The volume control shows its trying to work, puff of green comes and goes at the bottom of the slider.
However I've tried "cleaning" for other concerns and that made a real mess of the setups for several programs. I suppose I could do a refresh but that's equivalent to a re-install..
All of a sudden many of my programs either won't launch or stops working right after launch.
I have no "reset" point that can fix this, and I have tried "sfc /scannow" (without having a clue what it does). After the sfc /scannow, the command prompt message said I had some corrupt files, and not all of them could be fixed automatically.
What can cause several programs to stop working all of a sudden, and what can possibly fix it?(Without re-installing Win 8 of course)
I have a Windows 8.1 Lenovo notebook and a Toshiba Satellite Windows 7 laptop, and a mouse.
Well, the mouse has been working fine for 4 months, but suddenly, the mouse has stopped working in my Toshiba laptop. As I didn't know how to fix it, and as Toshiba laptop was full of crap, I've just formatted its HDD and made a clean install of Windows 8.1 and updated everything.
After that, I've plugged the mouse in and the same error: it connects and disconnects all the time. Sometimes, if I'm in the Device Manager refreshing the devices, mysteriously it start to work, but just for a few minutes. Sometimes, and just sometimes, the Device Manager shows that there's an unknown device connected to a USB port that is not working. The error code is 43.
That mouse works perfectly in my other notebook, the lenovo. I've connected a different mouse to the Toshiba and it works perfectly, in any port. So that makes me say this:
-The mouse is not broken, cause it works in my other laptop
-Toshiba's USB ports work nice cause any other device I connect works seamlessly
-After a clean install, it can't be a software problem
I have a Toshiba laptop running windows 8.1 and the issue that Im facing is that suddenly sound stops working, most likely when playing youtube videos. This is what I've done so far:
Reinstalling drivers (microsoft, realtek, conexant)
Upgraded to 8.1 (I had this issue as after a few weeks I installed windows 8, never happened on 7)
HDMI and headphones outputs are working just fine.
When I was on windows 8 I could make the speakers work by just clicking on disable and re-enable from the sound properties, If I disabled the microphone the speakers started to work again which I have no idea why that used to happen. Now on 8.1 the only way to make them work is by closing the lid or restarting the laptop which is pretty annoying.
These are the current (default settings) I have played with them but nothing fix the issue.
I have a Sony Vaio running Windows 8.1 Pro. I was on cs portable with a USB mouse and I pressed a few keys and the mouse stopped to work. It came up with the message that it was not recognized. I tried to uninstall the USB drivers, but had no luck. This problem has been going on for a few days. I tried other solutions but they didn't seem to work. The red LED light was on.
View 9 Replies View RelatedI got a Venue 8 Pro and have been playing around with it. The keyboard itself is nice, but it's not autocorrecting anything. It shows the normal squiggly red underline when I misspell a word. This makes typing on it really difficult compared to my other mobile devices.
I checked if it was enabled in the settings (Modern UI), and it is. The switch is gray, but I can switch it on and off.
I did an update right after getting the tablet and it still doesn't work. I've tried rebooting a couple of times.
We purchased 15 Surface Pro 2 tablets for our School Administrators. Touch did not work for 3 tablet 'out of the box'...or so I thought. Since receiving them, touch has stopped working on 5 more. Each time Microsoft has replaced the device without question so I assumed this was a known issue. However I am now pretty sure it is happening during my imaging process. I am using SCCM 2012, via PXE and/or USB. The Task Sequence completes successfully and all drivers appear to install. I am using the driver package from Microsoft. The stylus works but not touch. I can't complain about the support MS is providing since they replace the device every time but I am sure there must be a fix I have not tried.
View 6 Replies View RelatedSamsung all in one DP700A7D 3 weeks old, did recommended SW updates, now no touchscreen.
Spent hours on remote support with samsung, and apparently I know much more then them, and no solution, I don't think wiping a 3 week old computer and reinstalling everything is an option, could it be drivers, although I cannot find a driver for the samsung touchscreen, everything goes back to SW updates, which has no updates available.
My touch screen to my Aspire R7 laptop is no longer working. I got a notification about there not being enough power reaching the USB port, and it stopped working after that. I'm not connected to the internet, so it's not a bad update, but I don't know what the problem is, or how to fix it. When I go to PC Info, it says "No pen or touch input is available for this display" which I know is not true because I've been using it's touch screen the entire time I've had it.
a common problem is that the drivers aren't updated. I don't think this is my problem as I haven't installed any updates today (I haven't been connected to the internet) and it's been working fine prior to just now.
The battery is fully charged (and was at 50% when I got the notification), so the power shouldn't be an issue.
Specs:
Acer Aspire R7-572
Intel(R) Core(TM) i5
Windows 8.1
I bought the Asus Zenbook Touch (ux31a-bhi5t11) yesterday, and the 2 finger scrolling worked fine at first, but a couple hours later it just stopped working. I can scroll using the touch screen, but not the touch pad now. It's brand new, and I haven't touched any of the settings, so I don't know why it would just quit.
View 4 Replies View RelatedI have installed Windows 8 release preview on my touchsmart tx2 1005AU and touch screen functionality has stopped working altogether.
View 3 Replies View RelatedI'm running an old touch screen in a mobile environment. And while I see great benefit to using Windows 8.1, I'm having issues with getting it to cooperate with my older LCD touch screen. If I could increase the size of the corner gesture, it would solve most my problems.
I've already increased the MouseCornerClipLength in the registry to 20, which is the max this will go. My screen just doesn't like the small tolerance Microsoft has given to bring up these gestures. I can cheat the calibration to make it work, but then it throws off the whole screen.
They are so freaking. I use a ELAN Mousepad.
View 3 Replies View RelatedI have installed Windows 8 on my XPS M1530.
All good, but the Windows 8 swipe gestures do not work on the touchpad.
I installed the Alps touchpad driver that was working on windows 7, but the special windows 8 gestures still don't work.
I fail to understand why on a laptop (which has no touchscreen) why you would want to have the swipe gestures?
Surely most folks don't look at the touchpad in use, so it is often that one starts off to the right (especially when the pad is off centre), and it is natural to move to the left to find where one wants to start - hey presto the charms bar opens, and if you're not carefull all sorts of events occur which you really don't want.
Any way on my Lenovo Z580 with synaptics 8.1 we have the worst of both worlds - there is no easy option in the Synaptics settings to turn off the gestures, so the option is to do registry editing to the key TouchPadPS2_3 - I have amended the Active Type dwords from 2 to 0. However there is a side effect of this.
When booting, there is now a delay till the process finishes - we now get blue circular processes next to the pointer for approx 40 seconds.
What other edits we need to make to remove this delay?
Here is the registry for the right edgepull:
[HKEY_CURRENT_USERSoftwareSynapticsSynTPEnhoneConfigTouchPadPS2_3Right Edge Pull]
"ConfigFlags"=dword:000e0141
"PalmCheckFlags"=dword:00000000
"ConfigFlagsEx"=dword:00040640
"LoXRel"=dword:ffffc568
"HiXRel"=dword:00000000
"LoYRel"=dword:00001388
"HiYRel"=dword:ffffec78
[Code]...
My N5110 has Alps TouchPad, but latest drivers for Windows 8 but it seems that they don't include new features... Whats the point changing the version number of the driver and says its Windows 8 compatible?!
Why new gestures aren't included? When will they be included?
I want to multi OS my windows 8. Because Microsoft flight X only works on vista, XP and windows 7. So I want to get windows 7 on my PC the easy way. Like installing it with an .exe if possible .
View 2 Replies View RelatedI just installed Windows 8.1 Pro on a new SSD(did the install with the other drives disconnected). I have another one with Windows 8 Pro installed on it and a HDD for my files.
When I boot, Windows 8.1 is loaded automatically and afterwards, I can see the partitions in disk management for each drive.
Is there a way to have a choice of which OS to load at startup?
Tool that can create Multi-Boot USB stick with Windows7 & Windows8 installation files.
I tried YUMI but it does not allow add more than windows installer.
When dual/multi booting with previous versions of Windows, you have your basic black screen w/white text and when choosing your OS to boot to, you have to use the up/down arrows and hit enter.
With the visually nice boot menu screen of Windows 8, you can actually use your mouse to choose your OS, just click the OS you want. Saves a few seconds by not using the keyboard.
I have an Epson BX635FWD printer that has and does work perfectly with Windows XP. I have recently purchased a Lenovo B540 with Windows 8 and it loaded the print drivers immediately. I thought how easy it was but have since found that it will not print a multi page document in full, but will suddenly stop halfway through a page. I made do by printing a couple of pages at a time, but then tried to print a 10 x 15 cm photo and it would only print 1/3 before stopping and spitting the paper out. The number of pages it prints correctly before giving an error message and ejecting the paper is inconsistent.
I have reloaded driver 1.32 (for Windows 8) from the Epson site twice and I have also gone back to the disc supplied with the printer and reloaded the driver from there.
I actually have 2 problems. One with the Windows tiles, and the other one with Explorer/Libraries.
- First of all, I start with the small problem. I booted my PC today, and to my surprise, my Windows tiles were gone. Only the Store, Onedrive, Explorer and the Desktop are there. The rest? Gone. Very weird, never had this before.
So that is question 1: How to restore the Windows tiles. It's weird they disappeared, I did nothing with the configuration or something else.
- Second, and this is the main thing.
I have a serious issue with the Explorer/Libraries. My PC has 3 HDD's and 1 SSD. The SSD is, obviously, the Windows drive. Nothing special. The other 3 are for mass storage.
Stock, Windows sets all on the C drive. Like user stuff, install paths, you know. Also the libraries, like Pictures, Videos, Documents and Music. This is the part where it goes wrong.
I don't wanna have all my Music, Pics and the rest on my C drive. Only my Windows installation... So, I put my libraries into the D drive. I made a My documents folder on the empty D drive, and changed the direction path of the libraries on the left to the new My documents map. This goes good, except for the Music map.
The Music map thinks he is Desktop. I've tried to tell him, he's not, but the folder isn't listening. Without jokes, this is a really weird thing.
I tried to re position, but the Desktop and Music folder are thinking they are each other. I don't know how to solve this. The other folders do work, no problem with those. Except for these two.
Bad thing is also, I thought, if I delete the map, and create a new one, maybe that'll work. Not. Instead, Windows decided to delete both maps, Desktop and Music, so now, my icons, and music is gone. It's really weird, as I said, it's happening only with these maps.
Any solution or trick for this? Maybe,I could try and get the whole 'Users' map, from the C drive to D, so it makes one whole?
I want to upgrade my Windows 7 home premium to windows 8 pro, but I have multiple user accounts on this PC. Will it keep all files, settings and applications for all users?
Edit: for the upgrade I will be using the Windows 8 Pro .iso file from the MSDN
I'm working on a multi-cam shooting setup. I have 12 Nikon D5000 targeting one object at different angles. I want all cameras to be triggered at the exact same time. So I have installed Vello Freewave Remote Shutter receivers on every camera and I trigger the shutter with one transmitter. They do all trigger, but sometimes, they are not all triggering at the same time. So 1 try out of 5, one or two cameras have slight shutter time difference with the other cameras. Is the radio frequency to blame? I cannot change it with the transmitter model I have. Would other setups work better?
View 1 Replies View RelatedI have a Toshiba laptop with windows 8 pre-installed in it. I would like to take a system image including OS, drivers and software. After that need to install windows 7 keeping windows 8 as it is. In case of failure, this image can be restored right?
If I want to remove windows 7 only how will I do it to keep windows 8 only.
I recently tried to install Ubuntu 12.10, and lost access to Windows 7 and 8.1, after a LOT of looking for bootable disks and stuff, I did fix it.
After recovering the operating systems (I had to delete Ubuntu partitions and then fix the Windows 7 bootloader, because there was 6 primary partitions), the Windows 8.1 partition says its 10.0GB and empty, but when I double click on it, you can see the files inside.
This is bad, because when I try to boot in Windows 8, it gets to the login screen after a long boot time, then it just shows the time, battery, and internet status, and the rest is a blue screen, implying its broken. I found out this is because some OS files are missing, which might be related to the above paragraph. I have lots of paid software in Windows 8, and it was LOTS of downloading, so I dont want to wipe the drive, or have to touch the data, only be able to boot into Windows 8 again.
When I open in a partition viewer, it shows the 70GB partition as it should, and also
I recently purchased a XPS 8700 with Windows 8.1 pre-installed. My only question is, "is it possible to have the same pre-installed OS installed on the same XPS 8700 for the purposes of a multi-boot?"
View 4 Replies View Related