I bought the Asus Zenbook Touch (ux31a-bhi5t11) yesterday, and the 2 finger scrolling worked fine at first, but a couple hours later it just stopped working. I can scroll using the touch screen, but not the touch pad now. It's brand new, and I haven't touched any of the settings, so I don't know why it would just quit.
View 4 RepliesWe purchased 15 Surface Pro 2 tablets for our School Administrators. Touch did not work for 3 tablet 'out of the box'...or so I thought. Since receiving them, touch has stopped working on 5 more. Each time Microsoft has replaced the device without question so I assumed this was a known issue. However I am now pretty sure it is happening during my imaging process. I am using SCCM 2012, via PXE and/or USB. The Task Sequence completes successfully and all drivers appear to install. I am using the driver package from Microsoft. The stylus works but not touch. I can't complain about the support MS is providing since they replace the device every time but I am sure there must be a fix I have not tried.
View 6 Replies View RelatedMy touch screen to my Aspire R7 laptop is no longer working. I got a notification about there not being enough power reaching the USB port, and it stopped working after that. I'm not connected to the internet, so it's not a bad update, but I don't know what the problem is, or how to fix it. When I go to PC Info, it says "No pen or touch input is available for this display" which I know is not true because I've been using it's touch screen the entire time I've had it.
a common problem is that the drivers aren't updated. I don't think this is my problem as I haven't installed any updates today (I haven't been connected to the internet) and it's been working fine prior to just now.
The battery is fully charged (and was at 50% when I got the notification), so the power shouldn't be an issue.
Specs:
Acer Aspire R7-572
Intel(R) Core(TM) i5
Windows 8.1
I have installed Windows 8 release preview on my touchsmart tx2 1005AU and touch screen functionality has stopped working altogether.
View 3 Replies View RelatedI have an Asus Zenbook Infinity, and I have run into an issue that I cannot seem to solve. It came with windows 8, but I have upgraded it to windows 8.1. The problem exists with both operating systems.
Whenever the lid is shut and the computer is allowed to go to sleep for an extended period of time, the start screen scales really small upon waking up. I have attached a picture of what I mean.
Windows 8 user. Is there a way to reverse the one finger scrolling on a new laptop? I reversed it for the two finger scrolling in the touchpad settings but there wasn't a similar checkbox for the one finger.
View 1 Replies View RelatedI have a Dell Inspiron 15z Ultrabook which has a Synaptics Touchpad, and after Windows 8.1 Upgrade, I lost the two finger tap right click feature, which worked fine previously. There is no option for it in the Dell Touchpad Settings, and after a Registry edit (Synaptics Clickpad - Right Click not working after windows 8... - HP Support Forum - 3053281) and Synaptics driver update, I got the feature back, except this time, when I tap with two fingers, it clicks both left and right, instead of only right (all other touchpad gestures work perfectly). I also tried the Two Fingers Scroll app, but did not like it.
View 8 Replies View RelatedI don't like the two finger scrolling on Windows 8 for Asus. It works decent but I still prefer the old fashions one finger scrolling it seems to be more fluid when scrolling through pages. For me it still feels unnatural to use two fingers; I want my Windows 8 PC back and toss the mac feature for two finger scrolling. I'm not sure why Asus added this because it really ruins my Windows 8 experience as scrolling is an essential function for workflow. I'll put it this way if one finger scrolling was enabled I would have a 10 out of 10 experience versus two finger scrolling I would have a 7 out of 10 experience.
View 3 Replies View RelatedI've been sorely missing some sort of gesture to be able to scroll automatically to the top or bottom of any page in IE10.
Any way (or is there one already) to gesture to get back to the top so that you don't have to flick the screen repeatedly to scroll to top?
I was unpinning many apps from my start screen. Now when I try to run an app (such as Computer, or Control Panel) it creates an entry on the desktop taskbar, but not on the desktop.
I can't run anything on this Windows 8.0 desktop, except for IE. The only thing I can do with the taskbar icon is close the window.
For some reason the mousepad's two finger scrolling and two finger tap for right click doesn't work for my HP laptop in the signature.
At least the scrolling didn't work just earlier today but I see the two finger tap for right click is still not working
I bought a Gateway E56R41u to replace my Acer netbook. However, I downloaded the free upgrade to Windows 8.1 and my audio quit working. I've downloaded all the drivers that I could find and nothing works. Is there a driver for another machine that will work with my Gateway?
View 1 Replies View RelatedI installed Windows 8.1 enterprise on my Dell Inspiron 17R yesterday. Everything seems to be working great, except for one thing. I just noticed that pinch to zoom is no longer working via the touchpad. I came to rely on this feature quite a bit when running Windows 7. There are no issues in device manager, but under Mice it shows PS/2 compatible mouse instead of Synaptics touchpad. How to correct this and get my pinch to zoom back.
View 9 Replies View RelatedRight so I want to disable my touch screen because my friends at collage are very good about pissing me off (as banter). And I would like to know how I can disable it with the push of a button.
View 5 Replies View RelatedMy laptop running windows 8.1 (not a touch screen) - I would like to know how to use the Touch Keyboard in the windows store app. I have the Yahoo Mail app downloaded from the windows store, I want to open the Touch Keyboard inside the Yahoo Mail app so that I can insert the emoji icons.
I already knew this: Go to desktop, right click the taskbar => Toolbar => Touch keyboard. Now what, how can I make the touch keyboard popup inside Yahoo Mail app?
I am running an app that has buttons with momentary action, ie when you click and hold the button stays down, releases when you release the mouse button. At the moment I am stumped at how to replicate this with the touch interface. I have disabled the hold for right click option but still no good.
It looks as though the click action is done once you take your finger off the screen.
I have a Duo 11 (Sony VAIO Tablet Laptop | VAIO Duo 11 Ultrabook | SVD11215CXB | Sony USA this one) and one day I plugged in my mouse and suddenly the touch screen stopped working and after digging around in the device manager and settings i can find nothing except for this, "no pen or touch input is available for this display".
View 2 Replies View RelatedI have a HP 310 1120a touchsmart all in one pc and my system is saying limited touch support 2 fingers, so as you can guess my touchscreen isn't working, but was under windows 7 when i got it, sometimes it works in windows 8 but not anymore, have updated all drivers but still nothing.... How to get it running again if i can .
View 1 Replies View RelatedI have a dell xps 12, for some reason I can't find a way to make the on screen keyboard appear automatically when I click a text entry field, like it does on phones.
I have to manually select it from the task bar each time when I use it as a tablet.
I have a surface pro 1 with windows 8.1 installed. When I am on the metro screen and I click the Internet Explorer tile, I am sent to the desktop and the desktop version IE opens. How do I rein-able the touch version of IE.
I have IE 11 installed. I also have classic shell installed.
My problem is not the charms bar, that activates when touching the mouse (touch) pad, but the same charms bar, that appears when touching the screen on my tablet.
You can disabuse me and show me a website or a forum link but after 4 hours of research I am done for now.
I have a touch screen monitor on my windows 8 machine. It works fine but I have this issue. Every morning when booting PC, I have to disconnect the monitor USB cable and reconnect for the touch screen to work.
If I reboot the PC at any point after this it is fine works no problem, it just happens when pc has been left off over night.
In device manager set all usb hubs to not switch off power but can't think of anything else to do.
I think this may relate to updating this netbook from Win 8 to 8.1 (but I updated very soon after purchasing so not certain). Basically after several minutes of use, the Touchscreen doesn't respond to touch anymore. I can still use trackpad but no touchscreen.
I have installed latest updates (and drivers from Lenovo site), but still no joy. I've also tried recalibrating touch screen (via Control Panel app) but this hasn't worked (and "reset" option is greyed out).
Recently, I have a hybrid laptop (Lenovo Yoga 2 13). It recognizes my different laptop positions, so the keyboard is disabled when I rotate the screen.
But when I use it in laptop mode (using regular keyboard to type), I still get the touch keyboard on screen when I touch the screen on a writing field. How can I disable the touch keyboard if I use the tablet in laptop mode?
I have the touch keyboard toolbar enabled in Windows 8. I'm talking about this:
It used to work just fine a couple of days ago but as of yesterday or so it stopped working. I click the keyboard icon but nothing happens. This still happens after resetting.
Let the Duo 11 'draw' you in - The Nation / Are there any other? I have some kids who all love to draw, one even uses photoshop.
Either a stylus that interpreted pressure sensitivity, or a touch sensitive tablet (like above)
I've read quite a few posts concerning the charm bar (read: disabling it). These posts all seem to focus around the touchpad settings.
However, what I want is to make sure the charm bar doesn't appear when I'm (right edge) swiping my touch screen.
The touch screen keyboard click sound suddenly reduced loudness. This is happening on my DVP 11 running win 8.1
Used to be much louder, then this afterneed it just went soft on me. Is there a setting somewhere to restore the keyboard click loudness?
I cannot get the touch keyboard or picture password to come up consistently at logon screen. I had to go to services to make the touch-service work with desktop and logon (it was unchecked). Now, at fresh start-up or restart I can get the keyboard by touch but will not get it again if I log off and log back on. And under no conditions do I get the picture password option although I have a picture set up for it.
Fujitsu Lifebook T732
i5, 8Gb, 500Gb
12.5 touch/pen input
I have got my Acer Iconia W700 and it is good.
But i have 1 problem that i am trying build a Tablet News website on Weebly and when i drag and drop text or other element in the website it is good but when i touch on the text it goes straight to the text editor instead of the bar where you can delete or move and copy the text element and i can't do it because i want to delete the text element and it is getting annoying and it happens with most elements as well.
I tried using it with my Samsung Galaxy Tab 2 7 pen to get to the bar of the element to delete/copy/move the element but it is the same.
Is there a mouse method on the Acer Iconia W700 because i think that would be better selecting without going to the text editor like the text element and goes to the bar(move/delete) elements in my website.
Weebly.com is a drap and drop website builder that is very easy to use.
Windows 8 device (Dell XPS 12 i7 running Windows 8.1 Pro). I like the touch input when it is flat in tablet mode, but when I plug a USB mouse into it when I am at my desk, I want the mouse inputs to be treated exactly like finger inputs on the touch screen. For example, scrolling by touching/clicking anywhere in a window or the ability to flick things using my mouse like I can with my finger. Simply using the mouse makes everything behave like it did in Windows 7: Clicking and dragging selects things instead of scrolling in Office 2013. I don't want this, I want it behave like Android does when I plug a mouse into it: Just like a finger was there.
I have looked everywhere for such a setting, but I cannot find one. How can I achieve this? I want all mouse inputs to be treated exactly like touch inputs.