I've read quite a few posts concerning the charm bar (read: disabling it). These posts all seem to focus around the touchpad settings.
However, what I want is to make sure the charm bar doesn't appear when I'm (right edge) swiping my touch screen.
Right so I want to disable my touch screen because my friends at collage are very good about pissing me off (as banter). And I would like to know how I can disable it with the push of a button.
View 5 Replies View RelatedI have a HP 310 1120a touchsmart all in one pc and my system is saying limited touch support 2 fingers, so as you can guess my touchscreen isn't working, but was under windows 7 when i got it, sometimes it works in windows 8 but not anymore, have updated all drivers but still nothing.... How to get it running again if i can .
View 1 Replies View RelatedMy problem is not the charms bar, that activates when touching the mouse (touch) pad, but the same charms bar, that appears when touching the screen on my tablet.
You can disabuse me and show me a website or a forum link but after 4 hours of research I am done for now.
I have a touch screen monitor on my windows 8 machine. It works fine but I have this issue. Every morning when booting PC, I have to disconnect the monitor USB cable and reconnect for the touch screen to work.
If I reboot the PC at any point after this it is fine works no problem, it just happens when pc has been left off over night.
In device manager set all usb hubs to not switch off power but can't think of anything else to do.
I think this may relate to updating this netbook from Win 8 to 8.1 (but I updated very soon after purchasing so not certain). Basically after several minutes of use, the Touchscreen doesn't respond to touch anymore. I can still use trackpad but no touchscreen.
I have installed latest updates (and drivers from Lenovo site), but still no joy. I've also tried recalibrating touch screen (via Control Panel app) but this hasn't worked (and "reset" option is greyed out).
My touch screen to my Aspire R7 laptop is no longer working. I got a notification about there not being enough power reaching the USB port, and it stopped working after that. I'm not connected to the internet, so it's not a bad update, but I don't know what the problem is, or how to fix it. When I go to PC Info, it says "No pen or touch input is available for this display" which I know is not true because I've been using it's touch screen the entire time I've had it.
a common problem is that the drivers aren't updated. I don't think this is my problem as I haven't installed any updates today (I haven't been connected to the internet) and it's been working fine prior to just now.
The battery is fully charged (and was at 50% when I got the notification), so the power shouldn't be an issue.
Specs:
Acer Aspire R7-572
Intel(R) Core(TM) i5
Windows 8.1
I have installed Windows 8 release preview on my touchsmart tx2 1005AU and touch screen functionality has stopped working altogether.
View 3 Replies View RelatedThe touch screen keyboard click sound suddenly reduced loudness. This is happening on my DVP 11 running win 8.1
Used to be much louder, then this afterneed it just went soft on me. Is there a setting somewhere to restore the keyboard click loudness?
I cannot get the touch keyboard or picture password to come up consistently at logon screen. I had to go to services to make the touch-service work with desktop and logon (it was unchecked). Now, at fresh start-up or restart I can get the keyboard by touch but will not get it again if I log off and log back on. And under no conditions do I get the picture password option although I have a picture set up for it.
Fujitsu Lifebook T732
i5, 8Gb, 500Gb
12.5 touch/pen input
I bought one of these Logitech Touch Lapdesk N600 Review | Everything USB It has a slide out touchpad and it is really really good as it is big -- BUT -- I can't get it to do the swipe from the edge thing to slide out the Charms bar (if that's what it is called) Of course I can use the keyboard to slide the bar out, but I'd like to be able to use the trackpad. The built in trackpad on the laptop does it, so I don't think it is unreasonable to expect the N600 to do that too. Or is it?
I have tried the "latest" software but that has made no difference.
how to make this happen or is there a better USB/WiFi trackpad I can get that does?
how this glas pane works instead of a scrollwheel? Handling, etc.
View 1 Replies View RelatedHow to get rid of the log in swipe screen?
View 4 Replies View RelatedMy laptop running windows 8.1 (not a touch screen) - I would like to know how to use the Touch Keyboard in the windows store app. I have the Yahoo Mail app downloaded from the windows store, I want to open the Touch Keyboard inside the Yahoo Mail app so that I can insert the emoji icons.
I already knew this: Go to desktop, right click the taskbar => Toolbar => Touch keyboard. Now what, how can I make the touch keyboard popup inside Yahoo Mail app?
I am running an app that has buttons with momentary action, ie when you click and hold the button stays down, releases when you release the mouse button. At the moment I am stumped at how to replicate this with the touch interface. I have disabled the hold for right click option but still no good.
It looks as though the click action is done once you take your finger off the screen.
I have a Duo 11 (Sony VAIO Tablet Laptop | VAIO Duo 11 Ultrabook | SVD11215CXB | Sony USA this one) and one day I plugged in my mouse and suddenly the touch screen stopped working and after digging around in the device manager and settings i can find nothing except for this, "no pen or touch input is available for this display".
View 2 Replies View RelatedI have a dell xps 12, for some reason I can't find a way to make the on screen keyboard appear automatically when I click a text entry field, like it does on phones.
I have to manually select it from the task bar each time when I use it as a tablet.
We purchased 15 Surface Pro 2 tablets for our School Administrators. Touch did not work for 3 tablet 'out of the box'...or so I thought. Since receiving them, touch has stopped working on 5 more. Each time Microsoft has replaced the device without question so I assumed this was a known issue. However I am now pretty sure it is happening during my imaging process. I am using SCCM 2012, via PXE and/or USB. The Task Sequence completes successfully and all drivers appear to install. I am using the driver package from Microsoft. The stylus works but not touch. I can't complain about the support MS is providing since they replace the device every time but I am sure there must be a fix I have not tried.
View 6 Replies View RelatedI have a surface pro 1 with windows 8.1 installed. When I am on the metro screen and I click the Internet Explorer tile, I am sent to the desktop and the desktop version IE opens. How do I rein-able the touch version of IE.
I have IE 11 installed. I also have classic shell installed.
Recently, I have a hybrid laptop (Lenovo Yoga 2 13). It recognizes my different laptop positions, so the keyboard is disabled when I rotate the screen.
But when I use it in laptop mode (using regular keyboard to type), I still get the touch keyboard on screen when I touch the screen on a writing field. How can I disable the touch keyboard if I use the tablet in laptop mode?
I have the touch keyboard toolbar enabled in Windows 8. I'm talking about this:
It used to work just fine a couple of days ago but as of yesterday or so it stopped working. I click the keyboard icon but nothing happens. This still happens after resetting.
Let the Duo 11 'draw' you in - The Nation / Are there any other? I have some kids who all love to draw, one even uses photoshop.
Either a stylus that interpreted pressure sensitivity, or a touch sensitive tablet (like above)
I bought the Asus Zenbook Touch (ux31a-bhi5t11) yesterday, and the 2 finger scrolling worked fine at first, but a couple hours later it just stopped working. I can scroll using the touch screen, but not the touch pad now. It's brand new, and I haven't touched any of the settings, so I don't know why it would just quit.
View 4 Replies View RelatedI have got my Acer Iconia W700 and it is good.
But i have 1 problem that i am trying build a Tablet News website on Weebly and when i drag and drop text or other element in the website it is good but when i touch on the text it goes straight to the text editor instead of the bar where you can delete or move and copy the text element and i can't do it because i want to delete the text element and it is getting annoying and it happens with most elements as well.
I tried using it with my Samsung Galaxy Tab 2 7 pen to get to the bar of the element to delete/copy/move the element but it is the same.
Is there a mouse method on the Acer Iconia W700 because i think that would be better selecting without going to the text editor like the text element and goes to the bar(move/delete) elements in my website.
Weebly.com is a drap and drop website builder that is very easy to use.
i have a dell 5520 inspiron laptop which i bought 2 months ago . Yeasterday while starting the laptop , just after the lock screen , i pressed a key on the keyboard, but the login page was not visible ,i could not access my account .
View 2 Replies View RelatedWindows 8 device (Dell XPS 12 i7 running Windows 8.1 Pro). I like the touch input when it is flat in tablet mode, but when I plug a USB mouse into it when I am at my desk, I want the mouse inputs to be treated exactly like finger inputs on the touch screen. For example, scrolling by touching/clicking anywhere in a window or the ability to flick things using my mouse like I can with my finger. Simply using the mouse makes everything behave like it did in Windows 7: Clicking and dragging selects things instead of scrolling in Office 2013. I don't want this, I want it behave like Android does when I plug a mouse into it: Just like a finger was there.
I have looked everywhere for such a setting, but I cannot find one. How can I achieve this? I want all mouse inputs to be treated exactly like touch inputs.
Any way to remove this screen when restarting Windows?
View 3 Replies View Relatedwho or what this is, only happens when I leave laptop unattended.
How can I stop this?
I just got Windows 8 and tried disabling the log-in screen. I went into "netplwiz" now I seem to have lost my administrative powers.
I can't download programs or access the "user accounts" tab in the control panel. Every time I try to do something that would require admin powers, I get a "user account control" prompt that tells me that if I, "want to allow the following programs to make changes to this computer," that I need to enter an administrator password and then click yes.
But there is no text box to enter a password and the "yes" button is grayed out. My only option is to hit "no" or "show details."
When I go into "PC Settings" and the "users" tab, it says that "there are no other users on this PC" and "Sign in as an administrator to add users to this PC." But how do I do that?
I've tried going into the "run" operation and entered "net user administrator /active:yes" command, but nothing happens. I also tried entering "msconfig" but I ran into the same problem of not having admin powers to do that. I tried starting in safe mode by jamming shift and F8 but that didn't work either.
How to get rid yourself of the touch screen keyboard symbol in the bottom toolbar have tried several ideas but after restart this still appears, my reason for wanting to rid myself of this is I don`t have a touch screen so is of no use
View 8 Replies View RelatedI made a screenshot file so that when I take a screenshot I can shove the screenshot in there. Should I be using another program? as now I am getting my screenshots coming up on my Start screen's live photo's tile. How can I control which of my pictures appear in my start screen's photo tile please or in my slideshow. (I've got on my laptop adobe photoshop elements 12)
View 3 Replies View Related
