I just installed Windows 8.1 Pro on a new SSD(did the install with the other drives disconnected). I have another one with Windows 8 Pro installed on it and a HDD for my files.
When I boot, Windows 8.1 is loaded automatically and afterwards, I can see the partitions in disk management for each drive.
Is there a way to have a choice of which OS to load at startup?
I recently purchased a XPS 8700 with Windows 8.1 pre-installed. My only question is, "is it possible to have the same pre-installed OS installed on the same XPS 8700 for the purposes of a multi-boot?"
View 4 Replies View RelatedI want to multi OS my windows 8. Because Microsoft flight X only works on vista, XP and windows 7. So I want to get windows 7 on my PC the easy way. Like installing it with an .exe if possible .
View 2 Replies View RelatedI have a Toshiba laptop with windows 8 pre-installed in it. I would like to take a system image including OS, drivers and software. After that need to install windows 7 keeping windows 8 as it is. In case of failure, this image can be restored right?
If I want to remove windows 7 only how will I do it to keep windows 8 only.
I recently tried to install Ubuntu 12.10, and lost access to Windows 7 and 8.1, after a LOT of looking for bootable disks and stuff, I did fix it.
After recovering the operating systems (I had to delete Ubuntu partitions and then fix the Windows 7 bootloader, because there was 6 primary partitions), the Windows 8.1 partition says its 10.0GB and empty, but when I double click on it, you can see the files inside.
This is bad, because when I try to boot in Windows 8, it gets to the login screen after a long boot time, then it just shows the time, battery, and internet status, and the rest is a blue screen, implying its broken. I found out this is because some OS files are missing, which might be related to the above paragraph. I have lots of paid software in Windows 8, and it was LOTS of downloading, so I dont want to wipe the drive, or have to touch the data, only be able to boot into Windows 8 again.
When I open in a partition viewer, it shows the 70GB partition as it should, and also
How to create windows 8.1 multi oem branding inside the install.wim
View 1 Replies View RelatedTool that can create Multi-Boot USB stick with Windows7 & Windows8 installation files.
I tried YUMI but it does not allow add more than windows installer.
When dual/multi booting with previous versions of Windows, you have your basic black screen w/white text and when choosing your OS to boot to, you have to use the up/down arrows and hit enter.
With the visually nice boot menu screen of Windows 8, you can actually use your mouse to choose your OS, just click the OS you want. Saves a few seconds by not using the keyboard.
i just bought my asus vivobook s400ca-dh51t 14 inch touch ultrabook and after a month of using the multi gesture suddenly it stopped working, i checked the mouse setting but i cannot find the device setting for the touch pad..
View 2 Replies View RelatedI have an Epson BX635FWD printer that has and does work perfectly with Windows XP. I have recently purchased a Lenovo B540 with Windows 8 and it loaded the print drivers immediately. I thought how easy it was but have since found that it will not print a multi page document in full, but will suddenly stop halfway through a page. I made do by printing a couple of pages at a time, but then tried to print a 10 x 15 cm photo and it would only print 1/3 before stopping and spitting the paper out. The number of pages it prints correctly before giving an error message and ejecting the paper is inconsistent.
I have reloaded driver 1.32 (for Windows 8) from the Epson site twice and I have also gone back to the disc supplied with the printer and reloaded the driver from there.
I actually have 2 problems. One with the Windows tiles, and the other one with Explorer/Libraries.
- First of all, I start with the small problem. I booted my PC today, and to my surprise, my Windows tiles were gone. Only the Store, Onedrive, Explorer and the Desktop are there. The rest? Gone. Very weird, never had this before.
So that is question 1: How to restore the Windows tiles. It's weird they disappeared, I did nothing with the configuration or something else.
- Second, and this is the main thing.
I have a serious issue with the Explorer/Libraries. My PC has 3 HDD's and 1 SSD. The SSD is, obviously, the Windows drive. Nothing special. The other 3 are for mass storage.
Stock, Windows sets all on the C drive. Like user stuff, install paths, you know. Also the libraries, like Pictures, Videos, Documents and Music. This is the part where it goes wrong.
I don't wanna have all my Music, Pics and the rest on my C drive. Only my Windows installation... So, I put my libraries into the D drive. I made a My documents folder on the empty D drive, and changed the direction path of the libraries on the left to the new My documents map. This goes good, except for the Music map.
The Music map thinks he is Desktop. I've tried to tell him, he's not, but the folder isn't listening. Without jokes, this is a really weird thing.
I tried to re position, but the Desktop and Music folder are thinking they are each other. I don't know how to solve this. The other folders do work, no problem with those. Except for these two.
Bad thing is also, I thought, if I delete the map, and create a new one, maybe that'll work. Not. Instead, Windows decided to delete both maps, Desktop and Music, so now, my icons, and music is gone. It's really weird, as I said, it's happening only with these maps.
Any solution or trick for this? Maybe,I could try and get the whole 'Users' map, from the C drive to D, so it makes one whole?
I want to upgrade my Windows 7 home premium to windows 8 pro, but I have multiple user accounts on this PC. Will it keep all files, settings and applications for all users?
Edit: for the upgrade I will be using the Windows 8 Pro .iso file from the MSDN
I'm working on a multi-cam shooting setup. I have 12 Nikon D5000 targeting one object at different angles. I want all cameras to be triggered at the exact same time. So I have installed Vello Freewave Remote Shutter receivers on every camera and I trigger the shutter with one transmitter. They do all trigger, but sometimes, they are not all triggering at the same time. So 1 try out of 5, one or two cameras have slight shutter time difference with the other cameras. Is the radio frequency to blame? I cannot change it with the transmitter model I have. Would other setups work better?
View 1 Replies View RelatedMy computer is a Lenovo Y500 with windows 8. A few weeks ago I heard a friend of mine was having BSOD problems and that his computer stopped booting completely.
I brought my computer over and had a nice time, we were attempting to fix his computer by switching the hard drive out and changing his computer form windows 8 to windows 7. A USB device was used for that step. The USB device was not fully working so it was tested on the BSOD computer AND my fully working computer. His computer was fixed shortly after and began running again.
I took my computer back home and immediately noticed a slow down so I reformatted my computer.....it still seemed really choppy and laggy and froze alot. A day later I begin to get blue screens out the A$$ and eventually it comes to a Automatic repair loop. I had to order a recovery disk because my one key recovery no longer worked. I Ordered the recovery disk and bam my computer seemed to be working again after a long recovery process.
Foolishly I took my computer back to the place it seemed to work fine. Upon coming home again. I begin to notice problems and bam my computer tells me that It is in danger back up files or you may possibly lose them.
Another friend buys a new computer and he takes it to the BSOD house. Guess what he got? The BSOD he was using the flash drive used to add windows 7 to a friends computer to add windows 7 to his new laptop when it happened 6 times in a row. He recovered his computer and it seems to be working fine for now.
However my computer isn't; even after recovering it. While yes, it is moving fast and working great. The computer STILL gives me the warning that i must back up my files and what not. I also tried the CHKDSK in command prompt and it froze on 27% so I stopped it. I checked the D: and C: drives from my computer and going to properties but it said there are no problems.
The program that DOES let me know the problem still persists is the constant reminder telling me that their is a problem with the Device. Also my Intel rapid story device places an exclamation point on the HDD and says that one or more events, and data may be at risk. I do not know what to do...I feel that it is either a virus from the flash drive or possibly a Hardware problem caused by a surge in his house, but if that was true 2 of my other friends laptops would be fried as well.
It seems that this slowly happens over time each time I recover my HDD. The blue screens barely come. Its when I notice Games, and programs malfunction that the blue screen begins to show again.
how to do multi delete of deleted email folder in the email app that comes with windows 8.
View 9 Replies View RelatedI want to install a multi-boot W 8 / android and I've already boot on "android-x 86-4.2-20121225" (without install) with my W 700 but the wi-fi is not recognized. how to find a version of android who recognized the wi-fi card of W 700?
View 8 Replies View RelatedMy Windows 8 desktop PC was working fine up until yesterday when it wouldn't recognize my external dvd drive for some reason. I tried some troubleshooting steps such as deleting the upper and lower filters in the registry editor and everything was fine until I rebooted my PC.
Upon rebooting, I noticed an extremely long boot time (about 10-15 mins) which I found highly unusual but the computer worked fine until I rebooted it a 2nd time. The 2nd time after rebooting it, it was stuck at the HP loading screen so I left it on overnight to see if it would take longer to boot but to my surprise, it was still stuck at the loading screen when I woke up this morning!
Here are some specs:
OS: Pre-installed Windows 8
Model: Hp Pavillion p7-1459
All drivers should be up to date because I frequently run windows update.
Yesterday night I upgraded my PC to windows 8 with an old windows 8 installation media. Everything was going fine and i also restarted it yesterday but today morning when I powered my PC it went through the Dell Splash screen but after that the screen freezes with a black screen and after 1-2 minutes It restart and again the same thing happened.
View 7 Replies View Relatedmy computer has suddenly starting acting up:- I cannot enter my password due to no response via the keyboard I am using a MS Comfort 500 keyboard & mouse but this isn't the main problem as if I can open up the computer (and I can now and then) the cursor is very jerky and unresponsive, but now things have got a whole lot worse the computer is starting up in repair mode (didn't know this existed) but cannot repair itself so gives me the options of refreshing or resetting, now resetting seems a bit drastic as although I have my files on external discs and in the cloud I have never done a restore point and it seems as though a disc my have failed but as I cannot get into the computer I have no way of doing any other checks it could have been a virus that caused the problem, wish I had created restore point, if I do a reset I will loose all the programs on the c drive.
View 16 Replies View RelatedI have installed the full windows 8.1 on computer i restart my PC and it was all going normally until it reached the "getting windows ready" screen for half an hour and nothing happened.
View 5 Replies View RelatedIt's not just your everyday slowness. I accidentally dropped my computer, not too violently or anything, and now it's having extreme lag.
Even before you boot, it takes about 3 minutes just to wait for the safemode options screen after hitting F8. So far, it's taken 20 to actually load the files and start safemode.
The only thing I can think would be causing this is the RAM cards were damaged? Or it might also be a softwear issue - I was running a high memory video game when it fell and shut off.
I have a Samsung 64 bit Notebook with Windows 7 Home Premium.
Every time I boot win 8 says my password is incorrect and I have to manually type it in order to continue booting. I Am using Classic Shell. I dont want my laptop to ask for a password. With Classic Shell installed I got rid of charms bar and now I don't know how to make my laptop stop asking for a password.
View 9 Replies View RelatedBioStar Hi-Fi A85W Socket FM2 Motherboard - ATX, Socket FM2, AMD A85, DDR3 2400 MHz (O.C), SATA III (6Gb/s), RAID, 8-CH Audio, Gigabit LAN, USB 3.0, PCIe 2.0, CrossFireX Ready
AMD A8-Series AD560KWOHJBOX Quad-Core A8-5600K Black Edition APU - 4MB L2 Cache, 3.6GHz, Socket FM2, Radeon HD 7560D (256 Cores), Dual Graphics Ready, DirectX 11, Fan, Unlocked, Retail
Kingston HyperX Red KHX16C9B1R/4 4GB Memory Module - 1600MHz, 9-9-9, DDR3, CL9, 1.65V, Unbuffered
Toshiba HDKPC03 DT01ACA100 1TB Hard Drive - 1TB, 7200 RPM, SATA, 3.5"
Window 8 64 bit.
I recently put this computer together as a cheap media machine. Everything worked. It connected via onboard NIC to the internet, it had sound. No problems.
Then I upgraded by adding another stick of RAM. Same module 4gb. and all hell breaks loose.
I lost lost and internet. Media sound service couldn't start. Said something along the lines that found new hardward. And it wasn't communicating with my NIC card anymore.. I tried updated the drivers. No joy.
I contacted Biostar and asked for an issue. They recommend me to update drives and then reset bios setting to factory defaults. I tried that. No joy.
I then RMA's the vendor and got another mobo. Installed it and it had the same issue. No sound no internet.
Last nite I decided maybe I should just reinstall windows, but now my computer freezes on the bios screen.
Was Wondering because When I used to do it on windows 7 I would Choose Install along side windows but it seems after installing windows 8 Grub Boot Loader is getting bypassed.
View 5 Replies View RelatedI Have a CPU it was Windows 7 Home Premium installed , i Got windows 8 downloaded from Microsoft . I installed it without a CD . I Extracted the .iso file and Just Click Setup.exe , it was really slow so i left it at my house , when i ome Home it enters windows 8 Home Screen . I am really confused , i thinks its gonna ask me Custom or Upgrade but when I'm home it just ask me what color do you want for your theme . I Inserted the windows 7 CD and Installed on drive B: ( B is a hard disk i made with diskmngmnt.exe ) and it boots to windows 7 , i want to shut down my CPU . I turned it back On ( Restart ) and it just shows me a black screen .
View 4 Replies View RelatedComputer: Dell Inspiron 530
Operating System: Windows Vista home prem. upgraded to Windows 8 home Pro. 32 bit.
BIOS Rev. 1.0.15
Hard drives: (# 1) Samsung 500 Gig with 2 partitions. (# 2) WD 500 Gig with 2 partitions. Clone of #1
Ram: 3 Gig
Problem: On start up with either drive, the system goes to a blue screen with a clock (different time zone) on pushing Ctrl + Alt + Delete a log in prompt comes on. After logging in a window with the circling dots and Preparing Windows comes on That stays on for about 4 minutes and then a black screen comes on. Pushing the power button will cause Shutting Down to appear breifly and then the machine shuts down. I have a backup of Drive #1 on an external drive.
I've got Windows 8 64 bit and I'm running it on a Gigabyte U2242 ultrabook on the max resolution 1 Yesterday, after booting up, I saw that the desktop is black, the icons are black/ invisible too, I can, however, see the taskbar.
On the other hand, the tile menu works just as intended.
The laptop has two video cards: Intel HD 4000 and a Geforce 650M, I've uninstalled the drivers for both under safe mode and reinstalled the latest ones.
I've read somewhere on the nvidia forums that the geforce driver can't be removed because v.304 comes with Windows 8. Is this true?
I'd like to dualboot between W8 & Linux, I currently have W8 installed. How to?
RIG
Intel Core i5 4440 CPU
ZOTAC GeForce GTX760 2GB GPU
Gigabyte H87N-WIFI Motherboard
Toshiba laptop. My son tells me ever since he went on you tube, he has pictures coming up Like wallpaper, with a field to type in where he wants to go, like the address bar in IE.
This worked for a while, but now the computer will boot it shows - welcome Glenn and the circle is spinning, but it will not display the start page. It stays black.
BTW he is running win 8. After about 5 minutes I am able to hit alt-Ctrl- Del and I managed to bring up task manager.I found that the CPU usage is at 98%. I shutdown the windows defender module, and it dropped to 48%. After exiting task manager it still does not display the desktop.
After several tries it is now a little faster and I can get to task manager without a long wait, and the cpu usage is down to 10-20 % , but still no start page.
After the computer sits for a while it goes into standby, I know that because after I move the mouse, I will see the space needle picture. After I click on the picture, it goes back to black.
Since I cannot get to the desk top, I cannot run anything, so I don't know how to proceed.
i installed w8 pro to a vhd. used kmspico portable 4.3 to activate. activated ok.
i boot the same vhd from memory ( using firadisk & grub4dos ) it shows 'not activated'.
if i rerun kmspico portable while w8 is booted from memory, it shows activated.
(the vhd on the hdd remains untouched when it is booted from memory), so if i reboot the same vhd again (not from memory) it remains activated.
booting from memory seems to change the activation status.
Having an issue with windows 8.1 freezing when booting from shutdown?
View 9 Replies View Related