I am trying to boot from the windows installation disc but after the window logo, for a split-second it says your pc ran into a problem, I didn't even notice the first time because it was so fast, then it just restarts. I already have indows 7 installed and i want to install windows 8 on my other hard drive.
View 1 RepliesI am trying to upgrade my sons win 7 32 bit to windows 8 32 bit he had bought a few days ago.I have tried 5 times .All 5 times it installs fine and reboots and gets to the point where it says 89% getting ready it then reboots and crashes with a blue screen from windows 8 ,the new one.What could be the problem, I have tried no startup items,checked off hide Microsoft services and disabled the rest.The mobo is a Asus P5LD2 . I am all up to date with windows also in win 7.
View 1 Replies View RelatedI've got an issue with Windows 8.1 x64 where sometimes (not always), if I Shut Down the computer, it'll shut down as normal, even displaying the "Shutting Down..." message, but rather than powering the machine off, it'll reboot just as if I had initiated a Restart instead of a Shut Down.
I definitely know I haven't accidentally told the computer to Restart as it's happened more than once, I know I've selected the Shut Down button and Windows 8.1 even states it's Shutting Down and not Restarting. If I restart the computer instead of shutting it down, it'll restart just as it should, nothing wrong there.
There is no abnormal behaviour at all during this process. The computer does behaves identically to if it was supposed to Restart and Windows throws no errors, BSOD's or any trace of something going wrong and thus somehow causing the machine to reboot rather than shutdown. powercfg /lastwake gives no information at all and Event Viewer lists nothing under Critical or Errors that could be a cause.
Most of the time though, the computer will just shut down as it should, but this random rebooting is getting very irritating. If I shut down the computer again after it has restarted (when I told it to Shut Down), it will then Shut Down as it should.
Something I should note however, when I shut down the computer, I do so through Classic Shell Start Menu's Shut Down button. Every time these random reboot occur, I have shut the computer down via Classic Shell Start Menu. I rarely shut the computer down any other way, so perhaps somehow Classic Shell is to blame? Perhaps there way of telling Windows to shutdown is a bit flaky?
I believe the same issue occurred on my laptop (also running Windows 8.1 x64 with Classic Shell Start Menu) when I shut it down through Classic Shell's Start menu, but only once (I don't use my laptop nearly as much as my desktop). This problem has never occured on my desktop or laptop back when they were running Windows 8 (not 8.1).
Every morning, when I turn on my Windows 8 computer, it freezes as soon as the Windows 8 logo starts loading. Instead of panicking, I always push the "reset" button (not the power button) on ZT, and my computer re-starts without any problems.It happens EVERY MORNING. I don't want to refresh, reset, etc...
View 10 Replies View RelatedMy computer randomly shutdowns when I use it for a while maybe 2hrs or 3, reboots by itselfs and windows cannot boot back, getting a black screen and nothing happens, So i manually turn it off and turn it on again to make it work. Sometimes it doesn't even want to work, black screen after multiple reboots So i need to syster restore it, sometimes that also doesn't work and i need to reset it completely.
At first i thought it was the new drivers i installed for my nvidea geforce gt640, the 331 version. I heard it was making pcs crash like mine does, so i downgraded the driver to 306 and it works for longer but the crash happened once again after a while, and after a windows 8 reset (deleted everything and reinstalled by itself). So this is a fresh Windows 8 i believe but still does crash.
After the crash that happened tonight, i restarted my pc and realised one of my fan in my pc is going extremely fast at random times but not for long. I went closer to hear which one was doing that and it seems to be the fan on my video card, I also touched my card and its very HOTTTTTT close to burning my hand ".".
My pc has been cleaned yesterday by my step dad, had lots of dust, even in the video cards fan, but now is clean and still overheating. Using a 350W PS which i heard is not really good and that i should upgrade really soon.
CPU Temp is fine, all fans are working properly, I believe my video card is broken or my PS not giving it enough power or something?
The auto reboots are annoying, making me have to restore every time and sometimes reset Windows 8. It seems to only happen when i do lots of stuff at once like mixing via audacity and having x2 perfect world clients up, plus radio streaming live.
PC Specs:
System Information
Time of this report: 12/23/2013, 04:58:47
Machine name: ESSENZEDNB
Operating System: Windows 8 64-bit (6.2, Build 9200) (9200.win8_gdr.121023-1503)
Language: French (Regional Setting: French)
System Manufacturer: ASUSTeK COMPUTER INC.
[Code] .....
I was wondering if it's possible to take windows 7 from my first computer and install it to my new one that has windows 8 on it (windows 8 has problems with its wifi where windows 7 worked perfectly).
View 6 Replies View RelatedI am trying to setup a new Windows 8 computer that is going to be a gift. I need to go through the setup procedure so I can install some software which is also part of the gift. How can I do this without having to use a Microsoft account, or at least with leaving the least amount of account remnants for the new user?
View 2 Replies View RelatedI previously setup a DVP 11 pro tablet by logging in with my outlook.com email account.
Now I am about to setup an AIO desktop . So I am sure the same questions will be asked about logging in with email account and password when first powering up the computer.
My questions are:
a) Should I use the same outlook.com email and password for the second computer as the first ? Will Win 8 even accept this because one tablet is already setup using this same email address and pw . Even if it accepts what are the implications?
b) I would prefer not to sync the Tablet and the AIO computer . In this case should I setup another outlook.com account with separate email address and PW? I guess I can do this by clicking on setup a new account .
c) Actually I would prefer to setup the 2nd computer with local account . But from my experience with the DVP 11 Pro , this option is not available in the setup screens. ie I can't get pass the the first screen that asks for email and password. Since this is a purchased machine and not a clean install , I believe the only way to do this is to first setup with an email account then subsequently disconnect and setup local name and password.
Recently I was trying to upgrade my Windows 8 Pro computer to Windows 8.1 Pro. But I had no working USB sticks so I thought I could make a NTFS partition into my hard drive and extract the Windows 8.1 Pro installation setup files on there. So when I restarted my computer, it booted up into the Windows 8.1 Pro installing setup but said that I needed to boot up into Windows and put the installation media back in. But I could not and just kept booting into the installation.
So I thought that if I delete the partition I could go back to Windows. So I did with DISK PART. Now when I restarted it, it now gives me "DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER". I'm guessing that when I deleted that partition, there is unallocated space left and my computer is trying to read off that but not the Windows partition.
I have a Compaq computer ...
I installed Windows 8 Pro on my now defunct computer way back when it was first released by downloading the files and saving them to hard disk before upgrading from Windows 7 Pro. I then upgraded to 8.1 and now 8.1 Upgrade, but that computer crashed badly. I have removed the hard discs and disposed of the computer. I am in the process of buying a new computer and want to install Windows 8.1 upgrade onto it, on a Solid State Drive. I can copy or clone the original "C" drive from the defunct computer onto the SSD, but, of course, none of the other specs would be the same. (I am taking advantage of the disaster to upgrade my specification. - A better CPU, and a better motherboard with more SATA and USB3 connections and, above all, a greater memory capacity of 8MB RAM, - the defunct computer only had SATA and USB2 connections with only 3MB Ram). Will a clone of the "C" drive work to give me Windows 8.1 upgrade on the new computer? If not, how can I transfer the licence from the defunct computer (I cannot get into it now, although I can get into the "C" Hard Drive)? I have the original download of Windows 8 from Microsoft available on the hard drive, although I do not think in a bootable format, just as a file on the harddrive. I can, however, install Windows 7 as I have my Windows 7 CD. how I can transfer my licence and install Windows 8.1 Pro Upgrade
View 7 Replies View RelatedSo the hard drive on my computer failed. I do not have the product key for this computer and can not get it of the failing hard drive because it does not power up at all. But the computer does have the built in product key in the bios. Is there a way that I can re install windows 8 on this computer and activate with the bios key with out getting the recovery media from the manufacture.
View 7 Replies View RelatedQuestion: How would you approach this migration?
I just bought a copy of Acronis True Image 2013 with Plus Pack. It appears that this is all I need as True Image will install the new motherboard drivers as part of the migration process. But do I stay with MBR or move to GPT?
Presently both Win7 (on a 120GB SSD drive) and Windows 8 (on a different 120GB SSD drive) are both MBR format. I don't want to start over from scratch. That's why I bought the Acronis 2013 with Plus Pack.
If I remove the boot drive from my old Windows 7 computer and put it into my new Windows 8 computer, how can I set up the new computer to allow dual boot at start-up?
View 1 Replies View RelatedThe windows 7 usb/dvd tool will not recongnize my flashdrive. I am trying to install windows 8 on my friends laptop but it will not work it says there is no compatible flashdrive in the computer.
This is the message it says : There is the flashdrive i using, there is the information about the flashdrive
Is it the flashdrive and how do I get it to work. I tired using a fat32 format on the flashdrive that did not work either.
Can i move old activated Windows 8 Pro with MC key to new computer (complete new build)? And how?
View 5 Replies View RelatedI have 2 HD's in my PC, yet I can only access one. Never had this problem before when formatting in W7.
When formatting i delete all partitions and create new ones. The thing is windows creates 3 extra partitions with my first one (recovery - about 300MB, system - about 100MB and MSR - Microsoft reserved about 128MB) and 1 extra partition with my second one (also MSR - about 128MB).
So i then have 4 partitions made by MS and 2 partitions i made myself (partition 0 and 1).
The next thing i do is select partition 0 and resume the setup.
When i check my HD's under "Computer" (dutch version of Windows). Only one HD shows up.
I have to galaxy s2 one of of the can't connect to the pc and the other one can. The one which dosn't connect a messege pops up ( the last device you connected to this computer malfunctioned and windows dosen't recognize it.
View 2 Replies View RelatedI bought a laptop, specifically the Samsung QX410-J01. The Laptop came pre-installed with Windows 7, and I upgraded to Windows 8 on 10/26/2012. I bought the Windows 8 Pro product key, downloaded, and upgraded to Windows 8.
Just last week my laptops Motherboard failed and my computer would no longer start up. The HDD works just fine though so all my files are safe. I decided I wanted to build my own PC and I am simply waiting on my case to arrive.
My question is I want to use Windows 8 on my new PC. The problem I am facing is I do not know how I am going to install Windows on my new machine. I do not want to purchase a new install disk and license since I have already paid for the OS. I can only think of two options and I am not sure if either of them are right.
1. Plug in my laptops hard drive into the new desktop. Run Windows 8.1 on that and use the new Terabyte hard drive I bought as a second hard drive.
2. Somehow put Windows 8.1 on a flash drive and install it from the flash drive onto the new blank hard drive. Then use the product key that I had purchased to activate the OS onto the new hard drive!
I really do not want to have to purchase Windows again, but if I must I guess I will. I believe there has to be a way I doubt after being a loyal Microsoft customer, switching to Windows Phone recently, and buying an Xbox One, that Microsoft will just say "Too bad, buy it again".
My computer has been running fairly slow lately, and I want to do a full system restore. I've done this on my old Windows 7 computer with no problems, but I can't seem to do it with Windows 8.1.
My laptop didn't come with an installation disk, Windows 8 was already installed when I got it. And I can't seem to make a recover partition drive.
How I could go about doing this. Last year I bought a Windows 8 Pro upgrade disc we used to upgrade our machines from Windows 7 home Premium to 8 Pro. Is it possible for me to use that same upgrade product key for Windows 8 Pro on 8.1 so I could have a Pro version of 8.1? The computer I originally did the upgrade on I am no longer using and is there a way to deactivate the license on that one so it could be used on the new computer I bought? Also I just want the extra's of the Pro version so does it matter it is the license for Windows 8 even though the new computer uses 8.1?
View 9 Replies View RelatedThe computer I am using is a Dell Inspiron M5040 laptop.
I got a Samsung 840 Pro Series SSD to replace my HDD, and used the Samsung Software that came with it to image my OS over to the SSD. It had an error at first, so I removed my antivirus program and ran it again, and it worked.
Everything works pretty much the same, except for noticeable differences in search and Internet webpage access.
If I search in Explorer, the searches are fast and prompt. But if I search with the regular search charm ( WIN+S ), searches are more than 7x slower than on the previous HDD. Also, webpages a quick to load on different computers (not the internet speed, in other words). But this computer had slow loads, and now the loading is even slower on the new SSD.
Things I've tried:
Multiple SFC scans - all say there is some files that could not be fixed All windows updates installed enabled Trimm, updated SSD firmware, ran Windows SSD optimization, optimized computer for SSD use Reset Internet Explorer Rebuilt index
I'm thinking of ditching this slower laptop in favor of something... anything nearby. Regretting either imaging to another drive, or using Samsung to do it.
I have just bought an AIO Asus desktop with 1 Tb of storage. The c: (Windows)drive is allocated 100gb and the d: drive 931gb. I just want to transfer all the data from my old computer. This was pretty much all in the folder c:>Users>Myname, but when I try to transfer it all into the same folder on the new computer, obviously with 100gb there is not enough space.
View 2 Replies View RelatedWin 8.1
Every time after a major automatic update through Windows Updater, after rebooting, the computer starts the same process as the last steps when you install a fresh version of Windows 8, that is, you see the multicolor screens one after the other with the message that it's installing your apps, then don't turn off the computer etc. After the sequence is over, I'm taken to a blank screen and I have to log out and in to my profile. It seems, that after the update I'm being logged out.
I only have one user with the computer and I turned off the guest account. Also and It may be related,Can't create a new user account. I created a new user account with administrator privileges as usual, but the new account does not show when I log off and then in or try change accounts. It also isn't listed on the upper right corner of the start page.
Basically even though I see it in other accounts, I can't switch to it. I turned on Guest Account and also I can't choose it.
I was installing Windows 8 at my desktop pc.Suddenly power cut occured and it caused the compute to shut down.Then when I restarted my pc again a messege appeared saying that the installation has been corrupted and it can't be continued and it doesn't log on.After that when I tried to re-install Windows 8 the setup got stuck at the "setup is starting" window.I waited overnight for it to go and the installation to start.But it doesn't happen.I have tried to re-install several times but the same problen happens again and again.So neither I can log into my computer now nor I can re-install windows.I don't know what to do.
View 9 Replies View RelatedAbout 3 times now this has happened, I'll shutdown my PC using the tile target "C:WindowsSystem32shutdown.exe -s -t 00" and usually there is a delay in between shutting down and it randomly booting itself which makes it really weird that it isn't just an instant restart instead of shutdown. It's not a very long delay really, maybe 1-2 minutes.
The last two times I remember it was around 3:00 AM which is when it was set in Action Center Maintenance Settings to wake up the computer and run the scan. The thing is, I unchecked it from Maintenance Settings Friday night and it still happened last night (and it was kind of weird last night with daylight savings and all..) also, does the "wake up" to scan boot a completely shut down computer or just one idle/asleep?
After searching on this forum there seems to be some issues with Avast 2014 and boot issues. My 8.1 doesn't have any slow booting issues but perhaps it's related that this is the anti-virus I run.
I checked the Event Viewer Log and selected Power-Troubleshooter but I didn't see an event for the past two nights. powercfg lastwake command displays "Wake History Count - 0"
I never encountered this issue with Windows 7 or Windows 8 so it's hard to imagine it could be BIOS related?
When you boot up your computer and log in to your Windows 8, you'll usually see your typical start screen full of icons, like mine.
With your wallpapers, shortcuts and everything, that's fine.
Here's my problem, it was only happening once per 10-15 log in to Windows 8, but now it's happening more frequently, when I key in my passcode and the loading begins, it changes to 'Preparing Windows...' instead of just the normal 'logging in...' or whatever, then the desktop turns blue and it literally reset everything.
Like so. Attachment 27195
There, all the icons, the shortcuts, all gone, the wallpaper change to some default ones, in fact, windows 8 itself sort of became some default state, with only internet explorer and recycling bin icons left etc. My files are still in the computer, in fact, if I log out and log back in it'll change it back to what it is before.
Is it only happening to me? Is there anything to be worried about here? Is there a solution to all this random reboots?
Since 02.01.2013 my Windows 8 is rebooting without a warning, and this is happening every morning when I come to work, I've noticed that Windows will restart when I double click a song in Winamp, once it happened when I tried to open a e-mail in Outlook, bust mostly it happens with Winamp.
I have all Windows updates installed, installed latest Winamp version still when I double click or drag&drop a file in Winamp, Windows will restart.
There is no dump file, the system only restarts without BSOD.
After installing a clean install of Windows 8 on my Dell Inspirion N5050, startup does get past the Dell logo and onto the Windows loading logo. However, it won't go further than this. The logo goes away, leaving the screen blank (NOT black) and it won't continue to the logon page or start menu. All lights are burning (meaning it's working somewhere underneath that weird blank screen). And the funny thing that when I press the power button (or close the lid) to put it to sleep and then wake it up by pressing again, the logon/start menu is there and Windows is working perfectly.
In short: everything works perfectly, except that I have to put the computer to sleep and wake it back up in order for me to see/get into windows.
Brand new Dell XPS 13 Ultrabook with Windows 8. 256 SSD, 8 gigs of memory, i5-3317, non touch screen. Working fine for 2 months and now will not boot after Dell logo. Have been on tech support three times still not solved. They sent a USB recovery drive and does not boot. They sent an optical drive and the windows recovery disc; still not working! Not a novice at this but fully stumped. Cannot get to a C prompt, cannot get into Safe mode. Am able to get into BIOS but is limited in what can be done there. Diagnostics says everything is fine. Am ready to go back to Windows 7 until they work the bugs out.
View 2 Replies View RelatedIs there any way to set up a hotkey using the windows logo button in sequence with another? for example "Win + Z" or "FN + Win". I have classic shell downloaded on my windows 8.1 laptop, and I want to set up a hotkey for the metro start screen. I'm aware of how to make a hotkey through a shortcut's properties, but there's no way to use the windows button as one of the keys.
View 1 Replies View RelatedI bought this notebook with Windows 8 preinstalled. Recently there's something bad happen to my notebook and I had to wipe all the partition and hard disk. So I downloaded Windows 8.1 ISO and make it bootable with Yumi Installer. But I cannot get default manufacturer logo on boot anymore. It's default to Windows logo. How to install it to get manufacturer logo back.
View 1 Replies View Related