Setup Installation :: HD Not Showing Up In Computer
Jan 13, 2013
I have 2 HD's in my PC, yet I can only access one. Never had this problem before when formatting in W7.
When formatting i delete all partitions and create new ones. The thing is windows creates 3 extra partitions with my first one (recovery - about 300MB, system - about 100MB and MSR - Microsoft reserved about 128MB) and 1 extra partition with my second one (also MSR - about 128MB).
So i then have 4 partitions made by MS and 2 partitions i made myself (partition 0 and 1).
The next thing i do is select partition 0 and resume the setup.
When i check my HD's under "Computer" (dutch version of Windows). Only one HD shows up.
I was wondering if it's possible to take windows 7 from my first computer and install it to my new one that has windows 8 on it (windows 8 has problems with its wifi where windows 7 worked perfectly).
my hp laptop is running 8 pro right now and i cannot find the 8.1 update in store even though all the updates are installed... i have included a screenshot of store.
So I am here trying to downgrade my Windows 8 laptop to Windows 7. (It is an ASUS X55U by the way)
Every time I go to advanced startup settings it doesn't show the troubleshoot option, only the Continue and Turn Off Your PC options. I've tried everything and the option won't appear.
I am trying to setup a new Windows 8 computer that is going to be a gift. I need to go through the setup procedure so I can install some software which is also part of the gift. How can I do this without having to use a Microsoft account, or at least with leaving the least amount of account remnants for the new user?
I previously setup a DVP 11 pro tablet by logging in with my outlook.com email account.
Now I am about to setup an AIO desktop . So I am sure the same questions will be asked about logging in with email account and password when first powering up the computer.
My questions are:
a) Should I use the same outlook.com email and password for the second computer as the first ? Will Win 8 even accept this because one tablet is already setup using this same email address and pw . Even if it accepts what are the implications?
b) I would prefer not to sync the Tablet and the AIO computer . In this case should I setup another outlook.com account with separate email address and PW? I guess I can do this by clicking on setup a new account .
c) Actually I would prefer to setup the 2nd computer with local account . But from my experience with the DVP 11 Pro , this option is not available in the setup screens. ie I can't get pass the the first screen that asks for email and password. Since this is a purchased machine and not a clean install , I believe the only way to do this is to first setup with an email account then subsequently disconnect and setup local name and password.
Recently I was trying to upgrade my Windows 8 Pro computer to Windows 8.1 Pro. But I had no working USB sticks so I thought I could make a NTFS partition into my hard drive and extract the Windows 8.1 Pro installation setup files on there. So when I restarted my computer, it booted up into the Windows 8.1 Pro installing setup but said that I needed to boot up into Windows and put the installation media back in. But I could not and just kept booting into the installation.
So I thought that if I delete the partition I could go back to Windows. So I did with DISK PART. Now when I restarted it, it now gives me "DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER". I'm guessing that when I deleted that partition, there is unallocated space left and my computer is trying to read off that but not the Windows partition.
I am trying to boot from the windows installation disc but after the window logo, for a split-second it says your pc ran into a problem, I didn't even notice the first time because it was so fast, then it just restarts. I already have indows 7 installed and i want to install windows 8 on my other hard drive.
I installed Windows 8 Pro on my now defunct computer way back when it was first released by downloading the files and saving them to hard disk before upgrading from Windows 7 Pro. I then upgraded to 8.1 and now 8.1 Upgrade, but that computer crashed badly. I have removed the hard discs and disposed of the computer. I am in the process of buying a new computer and want to install Windows 8.1 upgrade onto it, on a Solid State Drive. I can copy or clone the original "C" drive from the defunct computer onto the SSD, but, of course, none of the other specs would be the same. (I am taking advantage of the disaster to upgrade my specification. - A better CPU, and a better motherboard with more SATA and USB3 connections and, above all, a greater memory capacity of 8MB RAM, - the defunct computer only had SATA and USB2 connections with only 3MB Ram). Will a clone of the "C" drive work to give me Windows 8.1 upgrade on the new computer? If not, how can I transfer the licence from the defunct computer (I cannot get into it now, although I can get into the "C" Hard Drive)? I have the original download of Windows 8 from Microsoft available on the hard drive, although I do not think in a bootable format, just as a file on the harddrive. I can, however, install Windows 7 as I have my Windows 7 CD. how I can transfer my licence and install Windows 8.1 Pro Upgrade
So the hard drive on my computer failed. I do not have the product key for this computer and can not get it of the failing hard drive because it does not power up at all. But the computer does have the built in product key in the bios. Is there a way that I can re install windows 8 on this computer and activate with the bios key with out getting the recovery media from the manufacture.
I bought a laptop, specifically the Samsung QX410-J01. The Laptop came pre-installed with Windows 7, and I upgraded to Windows 8 on 10/26/2012. I bought the Windows 8 Pro product key, downloaded, and upgraded to Windows 8.
Just last week my laptops Motherboard failed and my computer would no longer start up. The HDD works just fine though so all my files are safe. I decided I wanted to build my own PC and I am simply waiting on my case to arrive.
My question is I want to use Windows 8 on my new PC. The problem I am facing is I do not know how I am going to install Windows on my new machine. I do not want to purchase a new install disk and license since I have already paid for the OS. I can only think of two options and I am not sure if either of them are right.
1. Plug in my laptops hard drive into the new desktop. Run Windows 8.1 on that and use the new Terabyte hard drive I bought as a second hard drive.
2. Somehow put Windows 8.1 on a flash drive and install it from the flash drive onto the new blank hard drive. Then use the product key that I had purchased to activate the OS onto the new hard drive!
I really do not want to have to purchase Windows again, but if I must I guess I will. I believe there has to be a way I doubt after being a loyal Microsoft customer, switching to Windows Phone recently, and buying an Xbox One, that Microsoft will just say "Too bad, buy it again".
I just bought a copy of Acronis True Image 2013 with Plus Pack. It appears that this is all I need as True Image will install the new motherboard drivers as part of the migration process. But do I stay with MBR or move to GPT?
Presently both Win7 (on a 120GB SSD drive) and Windows 8 (on a different 120GB SSD drive) are both MBR format. I don't want to start over from scratch. That's why I bought the Acronis 2013 with Plus Pack.
If I remove the boot drive from my old Windows 7 computer and put it into my new Windows 8 computer, how can I set up the new computer to allow dual boot at start-up?
My computer has been running fairly slow lately, and I want to do a full system restore. I've done this on my old Windows 7 computer with no problems, but I can't seem to do it with Windows 8.1.
My laptop didn't come with an installation disk, Windows 8 was already installed when I got it. And I can't seem to make a recover partition drive.
The windows 7 usb/dvd tool will not recongnize my flashdrive. I am trying to install windows 8 on my friends laptop but it will not work it says there is no compatible flashdrive in the computer.
This is the message it says : There is the flashdrive i using, there is the information about the flashdrive
Is it the flashdrive and how do I get it to work. I tired using a fat32 format on the flashdrive that did not work either.
The computer I am using is a Dell Inspiron M5040 laptop.
I got a Samsung 840 Pro Series SSD to replace my HDD, and used the Samsung Software that came with it to image my OS over to the SSD. It had an error at first, so I removed my antivirus program and ran it again, and it worked.
Everything works pretty much the same, except for noticeable differences in search and Internet webpage access.
If I search in Explorer, the searches are fast and prompt. But if I search with the regular search charm ( WIN+S ), searches are more than 7x slower than on the previous HDD. Also, webpages a quick to load on different computers (not the internet speed, in other words). But this computer had slow loads, and now the loading is even slower on the new SSD.
Things I've tried:
Multiple SFC scans - all say there is some files that could not be fixed All windows updates installed enabled Trimm, updated SSD firmware, ran Windows SSD optimization, optimized computer for SSD use Reset Internet Explorer Rebuilt index
I'm thinking of ditching this slower laptop in favor of something... anything nearby. Regretting either imaging to another drive, or using Samsung to do it.
Since refreshing win 8 my DVD drive doesn't appear in 'computer' and doesn't boot from the win 8 disk. The green light on the drive flickers and you can hear the drive reading the disk.
This is the 5th time I've had the charms not showing up forcing me to shut down then computer by using the button in the front of the thing. what do I do to fix this so if the same thing happens again, the charms do come up.
System Info Utility version 1.0.0.2 OS Version: Microsoft Windows 8 Pro, 64 bit Processor: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz, Intel64 Family 6 Model 58 Stepping 9 Processor Count: 4 RAM: 11983 Mb Graphics Card: Intel(R) HD Graphics 4000, -1984 Mb Hard Drives: C: Total - 243845 MB, Free - 168572 MB; Motherboard: LENOVO, 3434CTO Antivirus: Windows Defender, Disabled
I'm here for a "system folder" I cannot get rid of but as I'm posting my system info above I realize that Antivirus shows Disabled! I just checked Action Center and Windows Defender shows ON for both antivirus and spyware. Why does the info utility show Disabled??
Now, for the reason I posted, a couple weeks ago I was playing with different desktop apps to reply to phone texts via my pc. One of those apps required my phone to connect via Bluetooth to my pc so I went ahead and made the connection. I didn't really like the app so I uninstalled and also went to Devices and Printers and uninstalled the phone from there.
Now when I open My Computer ('Computer' in Windows 8), I see:
Hard Disk Drives (1) - Windows(C
Devices with Removable Storage(2) - Flash(D and BD-ROM Drive(F
Other(1) - SGH-T889 System Folder
Portable Devices(1) - Galaxy Note 2 Portable Media Player
My annoyance is with the Other(1). I know for a fact the "SGH-T889" is my phone's model number. Under Portable Devices I see the phone as well because I have it connected to the pc but even if I disconnect it, the 'Other' category remains. When I try to click, right-click, or do any type of clicking on SGH-T899 Explorer just hangs indefinitely. I need to restart Explorer to resume.
I want to get rid of this "Other" field. Underneath the SGH-T889 it says 'System Folder' in gray lettering and it shows an icon of a cell phone. But again, I cannot click on it without it freezing on me. There is no more phone in Devices and Printers or anywhere else I can think of.
I have a TDK 16GB usb pen drive that shows in Device Manager when inserted but not in Computer. It does sometimes appear but very rarely. I have updated all driver via Device manager an they are fine.
I have to galaxy s2 one of of the can't connect to the pc and the other one can. The one which dosn't connect a messege pops up ( the last device you connected to this computer malfunctioned and windows dosen't recognize it.
I am currently running Windows 8 64 bit and when I go to "My Computer" it is only showing my C: drive. I know my other drives (internal, external and dvd) are working because I can enter the directory name (ie. H: or E:) into the address bar and the content appears. Is there any way to fix this problem so that they show up in "My Computer"?
my WESTERN DIGITAL hard disk was running smoothly and i can access all datas.....but today 1 disconnected it and there after it is not showing on "my computer"...
bt d indicator light is on and it is rotatng insise......but cant access it ....
I have run into some networking problems and I think I have narrowed it down to the homegroup provider.
I have 4 windows 8 pro x64 computers connected to a router. Up until now, I have been able to disable the homegroup provider service because I don't want to use the homegroup and don't want to see it in my file explorer. I have been able to connect to all the shared computer drives up until I tried to disable the homegroup provider on my netbook. When I did this I lost the ability to connect to other shared computers. I re-enabled the provider, however I still cannot see drives on other computers. I can now see my netbook on the other shared computers.
I've been having a network problem since Refreshing Windows 8.1 Pro Update 64 bit on one of my PC's. I've been able to see other PC's OK but unable to see some devices (eg Diskstation NAS etc) on my network (all connected using Ethernet cables).
I've tried all sorts of things to cure the problem and all to no avail.
I just noticed that in Services there was no Computer Browser so I guess this is my problem. I copied over the browser.dll file from another PC (using the same operating system) to the Windows/System32 folder but after a reboot there was still no Computer Browser in Services. I ran a couple of scripts I found, a registry hack and something else to restore the Computer Browser then I uninstalled the Client for Microsoft Networks, rebooted and re-installed the client.
Now when I look in Services it's listed as Browser instead of Computer Browser and in the Description column it says "Failed to read description. Error Code: 15100. The error code has now changed to error code 2.
What I can try next other than a clean re-install?
I have just bought an AIO Asus desktop with 1 Tb of storage. The c: (Windows)drive is allocated 100gb and the d: drive 931gb. I just want to transfer all the data from my old computer. This was pretty much all in the folder c:>Users>Myname, but when I try to transfer it all into the same folder on the new computer, obviously with 100gb there is not enough space.
How I could go about doing this. Last year I bought a Windows 8 Pro upgrade disc we used to upgrade our machines from Windows 7 home Premium to 8 Pro. Is it possible for me to use that same upgrade product key for Windows 8 Pro on 8.1 so I could have a Pro version of 8.1? The computer I originally did the upgrade on I am no longer using and is there a way to deactivate the license on that one so it could be used on the new computer I bought? Also I just want the extra's of the Pro version so does it matter it is the license for Windows 8 even though the new computer uses 8.1?
I was installing Windows 8 at my desktop pc.Suddenly power cut occured and it caused the compute to shut down.Then when I restarted my pc again a messege appeared saying that the installation has been corrupted and it can't be continued and it doesn't log on.After that when I tried to re-install Windows 8 the setup got stuck at the "setup is starting" window.I waited overnight for it to go and the installation to start.But it doesn't happen.I have tried to re-install several times but the same problen happens again and again.So neither I can log into my computer now nor I can re-install windows.I don't know what to do.
During POST enter "BIOS Boot Selector Menu" by pressing F7.
Intel says: <F7> No uefi setup option in boot selection Others say: <F8> No uefi setup option in boot selection I say: <F12> No uefi setup option in boot selection
Lenovo Z580, my brand new laptop that is, its UEFI based and vymrdal's ISO from MSDN is also created to be installed as an UEFI Install.
Here's my issue; I am a math and science teacher in a public middle school and am outfitting my class with thirty brand-new Lenovo touch computers. I consider myself above-average savvy with computers, having worked with every version of Windows extensively since the late 80s and DOS. The only OS that I haven't spent much time on is Windows 8.
These computers are all brand-new and of course have legal copies of Windows 8 -- irritatingly, though not yet updated to 8.1. Soo...It took me a larger part of one day just to get ONE of these computers ready for class use. It involved several stages of the Windows update/reboot dance, followed by removing myriad unneeded bloatware applications, setting up multiple child accounts on the machine, and finally installing some freeware educational materials needed for instruction. It was all unbelievably tedious!
I turned around and look at all the remaining twenty-nine computers with dread. Obviously I'm trying to work out some kind of shortcut to avoid having to spend my whole summer updating each of the new machines individually. In an ideal world, I would make some sort of image of the machine that I just spent several hours updating/configuring, and then replicate that across the other twenty-nine. In terms of hardware, this shouldn't be a problem since all of the machines are exactly the same make and model. But I anticipate other problems such as, for example, the serial number of the Windows version and the computer name will then be the same on all the machines and have to be adjusted. There very well could be other issues with replicated serial numbers, etc.
I'm thinking maybe I just have to bite the bullet and work at each individual computer one of the time. And then image them individually so that when the kids mess around with them, I can do an easy restore. How I could make this work?
