Screen Mirror With 8.1 Desktop To TV With Xbox Or Roku 3?
Jul 30, 2014
I want to be able to screen mirror from my W.81 desktop wired to my TV thru Xbox 360 and Roku 3 without having to buy yet another device (Miracast) to do so. I know this can be done via Devices/Play/Xbox/IE App but the problem is that most content won't play properly with the IE App-IE browser yes but not the App for some reason. This same content will play on Chrome but I can't screen mirror with Xbox with Chrome. I really want to be able to do this without spending more money.
How I can display my windows 8 session on a TV using smartglass.
As I understand it, smartglass is a competitor to Apple's AirPlay. On Airplay, I can sync it with a television and show the display from a mac or ipad on a big screen wirelessly. I want to do the same thing where I can sit on my couch with a laptop, but display the windows desktop on the TV screen.
I installed 8.1 rtm as an upgrade over 8.1 preview and was immediately able to stream live and recorded wtv files/programs to my Xbox Media Center Extender without error.
After a several hours and maybe 1 or two reboots, all video (wtv, avi, etc) streamed to the Media Center Extender turned black after 5-6 seconds. Audio could still be heard, but there was no video and my Xbox remote control functions would stop working. I could go to the Xbox Blade Menu.
I went back to a manually saved restore point and still had the same problem.
Then I did a clean install of 8.1 rtm and again, everything was working properly again. Approx an hour later video streaming to the Xbox Media Center Extender went black.
"Play To" Media Center Extender also had the same problem, only that video would go black after 2 seconds.
If I return to the Xbox home screen and "Play To" Xbox 360 - video steams properly, although expectedly the ff/skip etc would not work.
I noticed that when the video would play normally to MCX one of the two Media Center Extender devices was not completely installed.
One of the devices has the IP address starting with 192.xxx and the other starts with either 127...
It takes some fiddling around, but if I
1. remove the association of the Media Center and Extender 2. delete all Xbox and Extender devices 3. reboot the xbox 4. Reestablish the Xbox and Media Center association 5. Allow the devices to be found and created (sometimes the Media Center Extender w/192. fails to complete installation) 6. Then Disable the MCX in Device Manager that references 192. and leave the one which references the 127
I have had dececent success with getting the above to work, but Every time I turn off my Xbox or leave MCX I need to follow the above steps again.
It's been 1 day since my last clean Win8.1 rtm clean install and I already have am up to Mcx-11 user!
My current build is a clean (non-upgrade) Windows 8.1 rtm AMD A8-3850 AMD Radeon HD 6550D (MS WDDM 1.2) v 13.150.102.0
I have also used the AMD Radeon Preview driver Yesterday Win Update pushed an update to the 6550D
How I can set up a more reliable connection to Xbox Media Extender?
Is it possible to mirror the C drive? I have an external HD I want to use and I've created an NTFS partiton on the external drive but when I right click on the C drive or the partition on the external HD it doesn't give me the option to Add Mirror. I'm running 8.1 Pro.
I am trying out Xbox Music and a Lumia 920. I am downloading songs from Xbox Music and creating playlists, but it never shows up Windows 8 desktop. When I add songs and playlists on my desktop, they show up on the Lumia 920.
how to make a mirror image in Windows 8. I remember in win7 I could just type "Recovery" and select "Create mirror image" but that doesn't work in Windows 8.
I have been using Syncback SE Free for a long time now with Win7. It works well. I like the mirror function and the ability for syncback to detect small changes and allows you to view different files. When I use the mirror function in syncback, it scans the drive/folder and only copy/delete the differences leaving the rest of the files intact.
I have one main PC as my work pc, and I rotate between 2 different PC's (win 7 pro laptop and win 8 pro desktop). So I like all files on each pc to be current. Think of it as dropbox but offline with tons of data. Currently I have an external hd which I use as an intermediary between the "current" pc and the "older" pc.
After I upgraded to win 8 pro, I noticed that I can do a complete backup with syncback, but I cannot use the mirror function. Syncback does not work in deleting files either from source or target hard disk. It can detect the file changes, but unless I delete the file at the target drive, it will not copy to the target drive.
Any mirroring software which can replace syncback free which works for windows 8 pro desktop and my windows 7 pro laptop? I have tried contacting the people behind syncback (2brightsparks), and they have a knowledge based which does not tell much. It seems that windows is getting stingy with the read/write options. Following the KB discussion on syncback yields nothing in fact it is too convoluted.
I don't mind if it is a network/ethernet solution (not online storage like dropbox-but using ethernet wires) or my solution which is using an external hd as long as all my work computers are "current".
I've tried just about everything, but can't seem to find a setting to stop this action. The screen on my laptop (Sony Flip 15A, intel4400/geforce735) seems to increase and decrease in brightness between screens. It's rather annoying not just because of the change, but also because it takes several seconds to occur and it occurs in discrete steps. I'm running the latest drivers from both intel and nvidia. I've tried turning off adaptive brightness and disabling the sensor service, and all effects (fade in, UAC, etc) have been turned off. A video of the condition is shown below:
(Vimeo was taking forever to process)
It even happen when no programs are opening/closing - for example, if I view a dark background web page and then a lighter background, the brightness shifts. I can't imagine how awful this will be in photoshop.
I'm trying to extend my desktop screen on my TV. I have my laptop connected through an HDMI cable to the TV. When I choose extend desktop, nothing is shown on the TV. The TV is blank. Windows does detect the TV screen because both displays show up in the "Screen resolution" dialog. The TV also indicates that it has a signal.
The screen has been extended because when I move the mouse to edge of the screen, instead of stopping, it keeps going. When I drag a window, it does not stop at the edge but it keeps going. However, neither the mouse or the window is shown on the TV. Of course, I can move the mouse and window back to the laptop.
I have a Dell Inspiron laptop, Windows 8.1, Intel Core i3-4010u, 6GB RAM, Integrated Intel HD graphics. I have Sceptre X325BV-FMDR TV. Not sure if this is an issue with my TV or laptop.
When I am in my start screen and I touch my desktop tile to get into my desktop I don't get into it. I either get into IE or into the last website I have been in and not closed. Can I sort this out?
Since upgrading to 8.1 I have started going directly to the Start Screen from the Lock Screen. Before in Windows 8, I went to Desktop. I have my taskbar at the bottom of Desktop which contains all the icons I want to access and it means now I am going back to Desktop from the Start. How can I organize my laptop that I don't directly to Start Screen from Lock Screen but go to Desktop?
Start up laptop - select to go to desktop dropping back to windows 7 looking desktop - after a bout 5 secs, refreshes itself so you can never select anything or breakout...
Is there a way to make the desktop button/tile/link to the desktop on the start screen to be a different image besides what is really on your desktop screen?
For example, lets say I want a photo of deep space on my tile desktop button, but don't want that image as my desktop screen. Just the tile.
My mouse works fine on the tile screen, but won't click when on the desktop screen. It moves fine and if I move it to the corner I can click on the setting button, but its anything on the desktop,or programs that run from the desktop that are effected.
After using Windows 8 on one of my machines, it had become apparent Microsoft is taking a new turn with their operating system. I wondered at first why Windows 8 was so much less expensive than previous versions of Windows. Now it seems clear to me. All the nice games in previous windows are now gone, and if you want games you now have to use metro and Xbox games. If you play the games at all, the big difference is now all the advertisements.
Any way to block these ads, but no luck. Microsoft has even fooled around and made it somewhat difficult to alter the hosts file. Figuring out a way to effectively block the ads ....
I have a Windows 8 HP laptop and the screen is just flashing. I have looked through other users posts and tried a few things but nothing is fixing the issue. I can't get past the flashing screen to enter Control panel, Safe boot or anything as the flashing is preventing me getting anywhere!! Lots of photos not backed up so don't want to lose them!
I deleted the default desktop tile (the one that shows your desktop wallpaper) from the start screen. I've tried Recuva to see if I could still recover the file, and searched the internet and the installation disk. Unfortunately, the file it is nowhere to be found... Is there's another way to retrieve it?
After start-up and when I click on the desktop tile, my windows 8.1 HP Envy laptop flickers between the Start up screen with all the tiles to the desktop then to a blue screen then back to the Start up Screen with all the tile and so on.
Can't seem to get off that merry go-round. HP Tech support has me hitting the F11 key to get me to recovery manager so I can back up my files.
Right out of the blue, windows 8 loaded up painfully slow so i restarted my HP g6 laptop.After restarting the laptop the user login screen appeared fine fine but as soon as i login the metro tile screen flashes to a default coloured desktop screen and back to to the metro screen every second. It is continous and you can't access anything as the screen jumps to the other one before you can even do anything!
My laptop is only a few months old and there has been no hardware change/upgrade.I managed to get into the system restore and restored to a point a few days before this issue started but, when the laptop restarted, the issue remain and the screen jumped between the 2 screens.
There are no error msgs or any can of beeps that appear. There was nothing of any note that happened prior to this issue occurring and the laptop worked fine until this issue.
I have just bought a new laptop with windows 8 and actually quite like the tile setup!Some programs I need to use are on the desktop and I regularly need to switch between desktop and start screen views. All I want to do is have an on screen 'windows button' that will take me from the desktop back to the start screen with a click of the mouse, as opposed to having to physically push the keyboard button.
I know this is ultimately lazy, but surely it should be simple and sometimes a mouse click is just so much easier than pushing the button!
This is rather ironic. Most people complain about booting to the new Start page and want to boot the the Desktop. I would rather boot the new Start page but my new Asus Windows 8 computer boots to the start page initially but after about three seconds automatically goes to the desktop.
I have been trying to fix for quite some time now, ever since I went to Windows 8 my computer just minimizes to desktop for no apparent reason and I cannot figure out why. There are no viruses on my computer, because I have re-imaged the computer to a fresh windows 8. The only thing I have installed are:
Airport (used to connected to my NAS at home) Apple Application Support Apple Mobile Support Apple software update Bonjour Citrix receiver ITunes Visual C++ 2012 x64 redistributable Microsoft Xbox 360 Accessories 1.2 Nvidie 3d Vision Controller Driver 33.182 Steam Team Speak 3 Windows Defender and Firewall
Seems to happen at no particular pattern, usually takes around 10 minutes before I am minimized to desktop. I even tried turning UAC off and all of the auto updates. what this is happening? The only workarounds I have is to run in windowed full screen which has a lower framerate on average.
Today when I turned on my laptop the screen was black, not showing a thing. With no options to solve this I rebooted the laptop by pressing the power button for a few seconds.
When I restarted the laptop it started and shown the username/password screen. I input my password and then a pop up window appeared with an error related to explorer.exe
I cannot see the apps screen or the desktop. The desktop is just a black screen with a grey bar. I can access windows explorer by clicking "windows key + E" but I cannot do anything else.
Now every time I start my laptop, the error does not come up, I input my password and I don't see apps screen or desktop.
It seems Windows 8.1 doesn't like my old graphic card drivers like Windows 8 did. In many cases when turn on my machine it boots to desktop but it doesn't show it - it just shows my mouse cursor and pure black background. When i click the power button tho, the desktop pops up for a second then the shutting down screen appears. After few reboots i finally managed to get to the desktop and use my computer (chances are 1:5 reboots lol).
I followed some tutorials i found on the internetz , explaining how sometimes ATI and NET framework 3.5 doesn't work together - this is not the case 'cause i tried following this tutorial to uninstall , clean and reinstall the latest drivers available for my crappy videocard + NET framework. Didn't worked...
I noticed something interesting while booting to Windows. IF there will be black screen with cursor - the boot time takes 1-2 seconds, IF everything will be alright - the boot process will take about 25 seconds. (just thought i should tell you this as well)
And finally here's my configuration: Pentium 4 , 3.2GHz ATI Radeon X550 2GB DDR2 RAM
I've upgraded from Windows 8 to 8.1 (64 bit). Everything seems to work fine except for the desktop.
If I save a file to desktop it doesn't appear on the screen when it's supposed to show 'desktop', it does though in the appropriate folder in my user profile. If I paste a file onto the screen, supposedly to desktop, and look up its properties, the location shows the document folder. Indeed, if I look at the document folder in my user profile, it is there. That is, the screen is connected to the document folder instead of the desktop folder. How to turn it to normal?
