Recently during the past month or so, my system has developed a problem where the wi-fi works initially for about a minute or so after waking up from sleep, and then abruptly disconnects.
View 2 RepliesSometimes when I am working on my laptop doing whatever it just disconnects me out of the blue. It shows this stupid icon and says that there are no connections possible:
At first, I did not know what to do so I just began doing some random things on the network center. Then I figured out how to solve it:
First open network center
Then, Open adapter settings
Disable your Wifi network card
Next, Enable it again
And then your internet connection is back again
Now this works fine on short term, it takes like less then one minute.
I have been having trouble with the WiFi connection on my laptop for quite a while now. It used to be that it would simply disconnect from wifi for now apparent reason, but I changed a few settings and now that seems to be resolved for the most part. I have a new problem though. The wifi tends to disconnect for just a couple of seconds occasionally, and then fix itself. It wouldn't be a problem, but the interrupt is usually enough to kill my Skype calls (which I do a lot of) or any VPN connections I am on (which I also do a lot of). What would cause a momentary interruption in wifi?
View 6 Replies View RelatedI just bought a Lenovo Y500 a couple of days ago and it came with a pre-installed Windows 8 everything seems working fine but when it comes to Wifi it randomly disconnects a lot , sometimes shows limited access and most of the time the signal strength bars keep going up and down.
View 6 Replies View RelatedI am running Windows 8 on a Dell Inspiron 3520. At random moments, the internet disconnects. Sites do not load, however it says I am still connected to the network. I have to manually reconnect to my network for the internet to work again. This is quite frustrating. The other laptops I have (and have used for many years) do not have this problem, so I believe it to be a problem with either the OS or the hardware.
View 5 Replies View RelatedI'm loving Windows 8 Consumer Preview so far. However, my internet connection (Cable/LAN/Hikari Fiber) is disconnecting after 5 or so seconds. I'm using a Marvell Yukon 88E8056 PCI-E Gigabit Ethernet Controller (on an Asus P6T Deluxe V2 Motherboard).
The system is dual booting with Windows 7 and that connection is perfectly OK. To get it to work again (for 5 seconds) I have to disable and re-enable the controller, and sometimes it seems necessary to delete the connection and set up another one.
Fortunately my connection is fast so I was able to stubbornly update a few small files via Windows Update by reconnecting many times, with a few % progress each time! Non of those updates were related to the connection hardware or this issue though.
So far I've tried (numerous times):
1. (The above update procedure, in case of hardware updates.)
2. Disabling and enabling the controller, and setting up the connection again.
3. (Swapping the drivers with Windows 7's, and then back to the originals.)
4. Re-installing Windows 8
5. Searching Marvell's site for driver updates.
6. Searching Asus's site for updates.
7. (Connection Login and Password are correct)
Points of note:
a. Windows 7 (dual boot) is connecting fine.
b. This is a hobby, so basic stuff should have been covered.
c. The timezone, date and time are set correctly.
This motherboard is very popular, and I don't see similar issues online, other than maybe wireless ones. I wouldn't have expected things to be too different from Windows 7. I'm expecting it is a simple driver issue.
For Christmas we purchased an all in one Dell Inspiron, along with a new Toshiba LED TV. I just recently figured out how to use the TV's mediashare function, playing video/audio files from my Dell's hard drive.
Prior to the update to Windows 8.1, there didn't seem to be any issues. However, since that update, we'll be watching a video file (several, it doesn't seem to matter what the file is) and the file will stop playing, and a message saying connection was lost will pop up. When I then check the computer, it shows it has "limited connection" to the home network, and I'll have to disconnect and reconnect before we can start watching again.
From what I can tell, it ONLY happens during mediashare use, and never during normal computer usage.
Well there's this game that uses HTTP protocol for everything. I built a new computer with Windows 8.1 Pro as my OS and whenever I try to play the game my internet ends up disconnecting. (connection from my computer to the router, the router itself doesn't disconnect)
This never happens with any other game, my internet never disconnects from anything else at all really. Whenever I open the game, try to download and view another user's replay or just in general try to do anything from within the game I end up disconnecting.
I'm using the exact same router/internet that I was using on my old computer (although a new network adapter, same model though) which was running W7 Ultimate. It's making playing the game very frustrating considering it needs an internet connection to officially submit any kind of scores you make.
I have a wireless router and am connecting 2 phones (wifi) and 1 PC (ethernet). The PC is running Windows 8 and has two User Accounts (I'll call them "Business" and "Personal").
Since setting up the router, the phones have connected over wifi without problem. If I log onto the "Personal" user account on my PC, it connects over ethernet, and the phones still work with wifi.
However, if I log my PC onto my "Business" user account, the PC says it has connected to the Home Hub via the ethernet cable, but there is no internet connection. It also causes the internet connection on the phones to drop (sometimes the wifi goes down completely, sometimes it says it's connected to wifi, but there is no internet). I don't think it's an ethernet problem either, as I connected my PC wirelessly instead of with the cable, and the same thing happens.
The PC only ever does this on the "Business" user account, the "Personal" account works fine (I'm using that now). Looked everywhere to find a solution, I assume it's something in the settings, rather than a router issue. Can't find the answer anywhere.
I have Windows 8.1 Pro 64 bit activated using kmspico. For some reason, every time I wake up my computer, it disconnects it from the Wifi and when I try reconnecting it, it won't reconnect, then I had to restart my computer to connect it again successfully. This never happened on the computer's previous Os's.
View 5 Replies View RelatedIs there a way to setup network profiles or something so that when I bring my Surface Pro to work and connect to the wireless network there it will use the static ip address I have but when I disconnect and then connect to my home wifi it will go back to DHCP? On my MacBook Pro I can go into the network settings and change the location profile I have setup for networks but I don't see anything like this for Windows 8.
View 4 Replies View RelatedI purchased a new Windows 8, Inspiron 15 7000 series - 7537 last December. I had been using a router at a hotel for the time, and it worked correctly. When I arrived home, I had a Belkin router, and i experienced network issues in that i could not connect to the wifi. I could connect with Ethernet cable. The problem was fixed through customer support eventually, but I now have a new Comcast router, and i'm experiencing what appears to be the same or a similar issue. I can access the internet fine by wire. With wifi, it says i have access to the internet over the internet icon in the bottom right, but i cannot access webpages. I can use skype, and communicate through it.
Here is the result from the ipconfig /all :
Microsoft Windows [Version 6.2.9200]
(c) 2012 Microsoft Corporation. All rights reserved.
C:Windowssystem32>ipconfig /all
Windows IP Configuration
[Code] .....
I really need the wifi on this router working for this laptop. Let me note that it works on other laptops, so it should be an issue with hardware or settings on this laptop.
I have two wifi APs in the home and only one has an Internet connection. the other is to access the wired LAN.
Last week I updated from Windows 8 to Windows 8.1 and thought everything was going well until I started getting wired LAN dropouts.
I have traced it back to 8.1 handling connection to wifi APs. In Windows 8, I was able to have "Connect automatically" for BOTH wifi adapters on this laptop. Now when I try to connect to the non-Internet AP, Windows 8.1 announces (correctly) "Limited access" and that's what Windows 8 did too. BUT, Windows 8.1 waits a few seconds then drops the connection with a useless message, "how me solve connection problems," where there is NO problem. A limited connection for the AP to the wired LAN is OK as it was in 8.
So now I am stuck with no home LAN access unless I drop the Internet AP and connect to the LAN AP.
Also, in the great wisdom of 8.1, because it is only a "limited" connection, it does not remember the Passphrase so I have to type it in every time. So much for progress.
What to do to get past this behavior and have a "limited" connection as OK as it is with Windows 8?
I prefer to keep my home WiFi network from public view by disabling the SSID broadcast, i.e "hiding" the network.
With two modem/routers (a Belkin Play Max F7D4401 ADSL modem/router and now a Cisco EPC2325 DOCSIS modem/router) on two computers (home-built desktop and Acer TM8172T notebook), after the initial connection Windows 8 Pro would not reconnect without tediously re-entering the SSID name and password. Once it does connect, it displays the original SSID name with a new one with an incrementally increasing appended number like:
I was manually deleting them all (except the original) using netsh, until I realized you can <right-click> on an entry in the screen above and choose "Forget this network."
This is the process I go through each time to re-connect. Is there something I'm missing?
I read that if Windows 8 saves too many WiFi connections, it cannot "remember" them to automatically reconnect to them, so on the notebook, I deleted all but wpcTrue (the original), and it now automatically reconnects, although occasionally it will add a new connection with an incrementally increased number -- currently the notebook shows both wpcTrue and wpcTrue 2. I had used the notebook on the road, so had about five WiFi connections saved. On the Desktop my home network is the only WiFi connection I've ever made. However, no matter what I do on the desktop, it NEVER remembers to automatically log on when the SSID is not broadcast.
I even tried manually setting up a connection via Network and Sharing Center > Set up a new connection or network, to no avail -- the desktop computer will not automatically reconnect.
I doubt that this is relevant, but the Belkin modem/router, the Belkin USB adapter I use on my desktop computer, and the notebook's Broadcom internal modem are all b/g/n. The Cisco modem/router is b/g.
If I "unhide" the SSID, i.e. broadcast the SSID, all is well in the world. Both computers automatically reconnect to the modem/router. If I hide the SSID, and then disconnect or reboot, the desktop computer will not automatically reconnect.
I just noticed that the pop up WiFi connection column shows "WiFi-2 Off" -- what does the "Off" mean?
And, why is it "-2" ? My notebook just shows "WiFi', period. (The first image with "WiFi (Off)" was from a previous Windows 8 installation on the desktop computer. I decided to change from EFI-boot to non-EFI so reinstalled Windows 8. I simply used the old image as a quick way to show how the connection name assignment runs away.)
How can i create local WIFI network without having internet access on my pc. This seems to work if I have access to internet but when i disconnect internet connection my PC ( virtual router ) cannot see anymore other devices..
All other devices that are connecting to my virtual hostednetwork are working without any problems expect my pc. What have i missed that my PC where virtual hostednetwork is running cannot see devices in "virtual" network without internet access?
My ISP provides service only via 802.11. I use laptop A most of the time. The captive portal for the service provider only allows one login per account at a time. The policy is intended to prevent multiple people sharing one account. It's just me, I'm the only user, but very occasionally I'd like to have a 2nd laptop access the internet simultaneously. No abuse, just the simple convenience of not having to logout from A if I need to use B for 30 seconds.
What I want to set up seems simple and it probably is:
WiFi Internet <---> Laptop A <---> ethernet cable <---> Laptop B
Such that Laptop B can share A's active WiFi connection without having to request its own unique address from the ISP.
At present, Laptop A has its network interfaces set up so:
- WiFi is connected, active, functional. Selected the "Yes turn on sharing and connect to devices" in sidebar.
- Under the wired network properties IP Version 4, I manually set addresses to be
IP 192.168.10.1
Subnet 255.255.255.0
Gateway 0.0.0.0
Laptop B has only a wired network, set to
IP 192.168.10.2
Subnet 255.255.255.0
Gateway 192.168.10.1
A & B can connect directly to each other, share folders, etc.
What do I need to do in order to get laptop B to transparently use A's WiFi connection? My guess is that A needs to be set up to do some routing between the internet side and the 192.168.10 subnet, and B needs to be set up to look to A as its "ISP" ... but I don't know where to begin.
I want to forget a Wi-Fi network from my network list i windows 8.1 . But when I right click on that network (to forget that network) nothing happens i.e. right click menu does not open.
View 6 Replies View RelatedMy laptop is few months old HP Pavilion g6 OS: Windows 8 uses a ralink rt5390r 802.11bgn wifi adapter.
The wifi was working just fine suddenly it stopped. It detects my home network but every time it tries to connect ends up "unable to connect to this network". It connects to my friends wifi but not mine. And it connects with cable.
There is a red cross on the wifi network but it's green not GREY. It is not a modem problem because the other PC connects just fine. When I'm on wifi, cmd ipconfig gives me disconnected media for all the network cards on the laptop. Command netsh shows failure and access denied.
What I have tried to do for the past week :
I upgraded the adapter/ driver. My windows is fully updated. I re-installed the network card. I tried a USB wifi. I uninstalled the private server. I uninstalled my Norton because I thought it was blocking the connection I also deactivated the windows fire wall. I changed the SSID and PSW ... nothing worked. and of course I tried restarting, resetting, rebooting, deactivating and activating, disabling and enabling every single thing but nothing works.
I'm having a serious problem trying to connect my other laptops running windows 8, the host laptop that is connected to internet with modem is Compaq Presario g56 laptop also running windows 8, I'm connected to the internet with my evdo modem and this laptop is browsing fine, I download mhotspot to share this connection, this other computers are connected but showing limited connection in their network and sharing panel, the modem have access to internet and the private network I created on the host computer also show access to internet, so why are other computers connected to this computer are not browsing with this internet connection. attached is the screen shot of the host computer this problem had been persistent for more than one week
View 2 Replies View RelatedI just bought a msi s30 laptop yesterday. So everything went fine when I test the wifi connection before I go to sleep. When I say fine, I mean I could connect to the internet. Then when I woke up this morning, I turn on the wifi but it says "no network found". I check the router and it is working perfectly fine. I also checked the device driver and its also working properly.
View 5 Replies View RelatedReinstalled lan driver and it is not showing in device manager. This is an acer aspire v3-371. Light doesn't come on when I toggle fn-f3 combo.
I think there is a service that is not running or it has been deleted. The driver files seem to have installled but it doesn't show under network adapters in device manager.
I have a new windows 8 machine (Dell Inspiron 2350), and there is a problem with the WIFI keeps disconnecting. I have determined that it seems to primarily happen whenever I am downloading any large files. When the computer is sitting idle or I am just browsing it doesn't seem to happen.
I do not have any such issue with my Windows 7 laptop or mobile devices.
I have already tried all the suggestions found elsewhere about changing the power management settings, and have already disabled "allow computer to turn off this device to save power".
I already have the latest driver, and have updated the bios.
I have a brand new Lenovo Ideapad Z585. It has a Broadcom Wireless adapter that will not connect to my home wireless network. I have tried everything I can think of to get it to connect to my Netgear router.
When I run Windows diagnostic tools it tells me that there is a problem with the wireless access point, there isn't I am using another laptop with no issues.
I have done a rescue install and gone through the same problems. This time the diagnostic report tells me I have not chosen a network to connect to despite entering the usual SSID, security type and password details in the network centre.
Networks are detected OK, I click on my network, am asked for the password and weither I wanted to share on the network, click ok and after a couple of seconds I am advised 'could not connect to network'
I have spent about 6 hours today trying to resolve this. The ethernet works fine.
I am completely ignorant of WIndows 8, this being my first computer to use it.
I recently bought a new desktop PC. I've had it a few weeks and for some reason I've recently been having trouble with the wireless. I can verify that the problem is with the computer, as my old laptop, my phone, and other devices all seem to be doing fine and don't experience the same problem. As the title says, every few minutes, the WiFi stops. It doesn't go completely, it simply changes to the picture with the asterisk (*) in the bottom right. This happens for only a couple of seconds before it goes back to normal. Then, it will happen again after a few minutes. This is completely infuriating when trying to watch videos online.
Sometimes when I use the troubleshooter it finds a problem with the WiFi adapter and resets it, and then says the issue is fixed.
i`ve heared a lot of hacking wifi passwords and i wonderd is that ever possible or it is just a joke???
View 4 Replies View RelatedI have my ethernet cable connected right now, but I can't even load my wifi connections at all. I live in apartments so everyone around me has wifi and my phone and iPad is clearly connected, but it won't load any connections.
View 3 Replies View RelatedYesterday I purchased a new Dell Laptop. In the setup and configuration the unit found my wireless network. I have two other PC's (not windows 8) two Kindles, two Cell phones and an IPAD on this router and all the Dell would say it it can't connect to this network. It won't ask for the passkey, it provides no additional information and I can't get online in my own network with this system. I can however log on to a neighbors unsecured network effortlessly.
I am using an old airlink 101 wireless router that has been trouble free for several years. I tried to log onto airlink for a support inquiry but they no longer provide support for this model.
I was playing a game on my laptop and decided to switch from wifi to ethernet. I plugged in the ethernet and turned off the wifi switch to ensure it switched over, but later when I tried to turn wifi back on, I see the wifi on/off switch is grayed out.
I went to my device manager to check for wifi network adapter driver updates, but everything seemed pretty up to date.
Any recommendations on how to fix this? Or at the least another method of turning the wifi on, like through command prompt or something?
I am trying to setup a wifi hotspot in my Windows 8.1
I have been trying to do this manually in the Command Prompt as all the proprietry systems 4 No) I tried all failed after about 12 hrs
I used the following command "netsh wlan start hostednetwork mode=allow ssid=NAME=password"
And obtained the correct response
I then typed "netsh wlan start hostednetwork" and got the following response
" The hosted network could not be started
The group or resource is not in the correct state to perform the requested operation"
How can I determine what this means and how is it resolved
I did check using the command prompt that this was possible with the computer and received acknowledgement
When I turn on my Toshiba Satellite laptop, it does not see my i-phone hotspot. Wi-Fi status says "No Wi-Fi connections available". I always have to turn the hotspot off and then back on after the laptop is up and running for the laptop to find it. This does not happen with my desktop. It sees the i-phone hotspot without the need to cycle the hotspot off and back on, so I'm thinking that it has to do with the Toshiba rather than the i-phone. Both laptop and desktop are running Windows 8. Not a big problem, but I thought some one may know of a setting which I need to change.
View 3 Replies View RelatedWhen I try to connect to a wifi network i try to click on a network from the wifi panel but the connect button doesn't appear the problem started happening just yesterday tried many things no luck ....
View 9 Replies View Related