When I try to connect to a wifi network i try to click on a network from the wifi panel but the connect button doesn't appear the problem started happening just yesterday tried many things no luck ....
View 9 RepliesI have had no trouble with windows 8 until the most recent update. Now everytime i start up my laptop it will not let me use any icons on the desktop, start menu, bar at the bottom of screen and wont even let me use windows explorer (i.e. I went into control panel to reset things to before the update but it just says not responding). The first thing i realised was windows defender was taking up a lot of space in the disk and was preventing other things from being loaded successfully so i managed to disable it, downloaded AVG and found no viruses.
This laptop came pre-installed with windows 8.
Today, my internet connection at home encountered a problem. I can connect to the WiFi but no internet access. Usually there's a yellow exclamation mark, but this one is fine, full signal but no internet access. Same thing goes to my iPod, can connect to the WiFi but no internet access.
To my surprise, all my sister's laptop and her Apple devices also the same thing, can connect but no access. I wonder what could be the problem. I use the troubleshoot on my laptop and it says "The DNS server is not responding" and it states that it can't be fix. I already restart my router but still same thing. Right now I'm using my phone's hotspot to connect to the internet and post this here.
My torrent is still downloading at full speed.
Last night my wife's laptop couldn't connect to the internet. Error message was DNS servers not responding. I unplug power cables and Ethernet cables from cable modem and router (WRT54GL DD-WRT). That didn't seem to work. Today, she was able to get on certain text heavy websites. The WiFi icon said that she had internet access, but still very limited access and slow. I try DNS Release from router's setup page and DNS Renew. I also tried to release and renew through command prompt, but nothing has worked. I can get full access if I bypass the router and connect to my Desktop. Is my router dieing?
Here is my Desktop's ipconfig /all when connected to the router:
Microsoft Windows [Version 6.2.9200]
(c) 2012 Microsoft Corporation. All rights reserved.
C:WINDOWSsystem32>ipconfig /all
Windows IP Configuration
[Code] .....
I have a Windows 8 x64 rig with a wireless card connecting to Linksys router connected to a cable modem. I also have Hamachi and Teamviewer installed, they add their own setup to the network page, don't know if they are the culprits but with DHCP I have no problem.
Everything works well until I try to set up a static IP on my PC (if I enable DHCP for IPv4 - no prob).
What I did: Set a static IP to avoid conflict with other PCs, subnet mask 255.255.255.0 (auto fills), gateway = my router's IP (192.168.1.1), DNS servers = took from my ISP's site (also tried Google public DNS).
What happens: my PC connects to the wifi as I can browse the router's settings page. But any website I try to access leads to a DNS server not responding. As soon as I reset back to obtain IP automatically everything works.
Previously I made a thread t hat when I sometimes load 2-3 tabs or more, I get page cannot be displayed and I have to refresh each of them until they load, it's like the traffic isn't enough to load several tabs at a time.. Either way troubleshooting gives me this:
Your computer appears to be correctly configured, but the device or resource (DNS server) is not responding
In Sharing Center > click the wifi info > Properties > Networking > TCP/IPv4 Properties > All set to automatically detect, even if I inserted the DNS addresses above into manually in IPv4...
In properties I see the same being set, no mismatching DNS servers..
while ago my internet on my laptop got messed, I reset the router and the Internet went down for days, but when it came back it wasn't working for my laptop, but everything else. Trouble shooting has told me it's a DNS server not responding, and now it's telling me the wifi doesn't have a valid ip config. I've tried many things, like with the internet protocals, the command prompt fix which also hasn't worked, and I'm stuck on what to do.
When I click on my my internet protocols v4/v6 it gives me the option to install maybe that's something or not.
I want basicly to home host a VPN, and that is what i do at the moment. So i tried with my friend after i did finish the setup (i did setup the VPN in the Windows Networks interface, over "Incomming Connections"), and i did portforward 1723, and the worst is, that when my friend connects upto the VPN from his PC at his home (not Local), to my IP, then it says on my PC he is connected.
But here comes the problems, at his PC, the Network Icon turns into a yellow warning icon, and when he clicks troubleshoot, it says "DNS Server does not respond", but at my PC here, it even says he is connected to the VPN, but also says no connection over IPv4, and the same on his side.
What can we do to get a connections from my PC to his PC, over the VPN, so he can access the Internet over my Internet instead, like lets say he has a blockade on for example www.facebook.com at home (which he of course doesn't has, it is just an example), and he connects to my VPN, as he accesses my Internet instead, he can open www.facebook.com, instead of having it blocked (one of the main purposes for a VPN, and the data encryption of course).
Here some screenshots:
My PC (Language = German):
My Friends PC (Language = Norwegian):
And as you can see on my PC, it says he is connected, and as you can see on his PC, it also says he is connected, but he cant access the Internet, or anything else related to the web. Now prepare for the funny part: We were on Skype, and as he connected to the VPN, and "lost" the Internett Access, we were still talking (i guess that's because Skype still runs over the home network, while the rest tries to access internet over the VPN connection .
"how can I remove Homgroup from navigation panel in 8.1 "
View 3 Replies View RelatedI have Windows 8 not 8.1
If I select Control Panel, Network and Internet, Network Connections, and right click Ethernet 1 and select Properties, Internet Protocol Version 4, it shows 'Obtain an IP address automatically' as being selected.
How ever if I go to the DOS prompt and enter ipconfig. My correct fixed IP address is shown.
Why can I not see the fixed IP address using the control panel?
Is there a way to setup network profiles or something so that when I bring my Surface Pro to work and connect to the wireless network there it will use the static ip address I have but when I disconnect and then connect to my home wifi it will go back to DHCP? On my MacBook Pro I can go into the network settings and change the location profile I have setup for networks but I don't see anything like this for Windows 8.
View 4 Replies View RelatedMy homegroup wont let me allow devices for some reason. I go to settings in the control panel and try to change it and the window just closes then I go to windows 8 settings in homegroup and I see this (attachment) and its grayed out and locked. What do I do?
View 5 Replies View RelatedI just bought a Lenovo Y500 a couple of days ago and it came with a pre-installed Windows 8 everything seems working fine but when it comes to Wifi it randomly disconnects a lot , sometimes shows limited access and most of the time the signal strength bars keep going up and down.
View 6 Replies View RelatedI purchased a new Windows 8, Inspiron 15 7000 series - 7537 last December. I had been using a router at a hotel for the time, and it worked correctly. When I arrived home, I had a Belkin router, and i experienced network issues in that i could not connect to the wifi. I could connect with Ethernet cable. The problem was fixed through customer support eventually, but I now have a new Comcast router, and i'm experiencing what appears to be the same or a similar issue. I can access the internet fine by wire. With wifi, it says i have access to the internet over the internet icon in the bottom right, but i cannot access webpages. I can use skype, and communicate through it.
Here is the result from the ipconfig /all :
Microsoft Windows [Version 6.2.9200]
(c) 2012 Microsoft Corporation. All rights reserved.
C:Windowssystem32>ipconfig /all
Windows IP Configuration
[Code] .....
I really need the wifi on this router working for this laptop. Let me note that it works on other laptops, so it should be an issue with hardware or settings on this laptop.
I have two wifi APs in the home and only one has an Internet connection. the other is to access the wired LAN.
Last week I updated from Windows 8 to Windows 8.1 and thought everything was going well until I started getting wired LAN dropouts.
I have traced it back to 8.1 handling connection to wifi APs. In Windows 8, I was able to have "Connect automatically" for BOTH wifi adapters on this laptop. Now when I try to connect to the non-Internet AP, Windows 8.1 announces (correctly) "Limited access" and that's what Windows 8 did too. BUT, Windows 8.1 waits a few seconds then drops the connection with a useless message, "how me solve connection problems," where there is NO problem. A limited connection for the AP to the wired LAN is OK as it was in 8.
So now I am stuck with no home LAN access unless I drop the Internet AP and connect to the LAN AP.
Also, in the great wisdom of 8.1, because it is only a "limited" connection, it does not remember the Passphrase so I have to type it in every time. So much for progress.
What to do to get past this behavior and have a "limited" connection as OK as it is with Windows 8?
I prefer to keep my home WiFi network from public view by disabling the SSID broadcast, i.e "hiding" the network.
With two modem/routers (a Belkin Play Max F7D4401 ADSL modem/router and now a Cisco EPC2325 DOCSIS modem/router) on two computers (home-built desktop and Acer TM8172T notebook), after the initial connection Windows 8 Pro would not reconnect without tediously re-entering the SSID name and password. Once it does connect, it displays the original SSID name with a new one with an incrementally increasing appended number like:
I was manually deleting them all (except the original) using netsh, until I realized you can <right-click> on an entry in the screen above and choose "Forget this network."
This is the process I go through each time to re-connect. Is there something I'm missing?
I read that if Windows 8 saves too many WiFi connections, it cannot "remember" them to automatically reconnect to them, so on the notebook, I deleted all but wpcTrue (the original), and it now automatically reconnects, although occasionally it will add a new connection with an incrementally increased number -- currently the notebook shows both wpcTrue and wpcTrue 2. I had used the notebook on the road, so had about five WiFi connections saved. On the Desktop my home network is the only WiFi connection I've ever made. However, no matter what I do on the desktop, it NEVER remembers to automatically log on when the SSID is not broadcast.
I even tried manually setting up a connection via Network and Sharing Center > Set up a new connection or network, to no avail -- the desktop computer will not automatically reconnect.
I doubt that this is relevant, but the Belkin modem/router, the Belkin USB adapter I use on my desktop computer, and the notebook's Broadcom internal modem are all b/g/n. The Cisco modem/router is b/g.
If I "unhide" the SSID, i.e. broadcast the SSID, all is well in the world. Both computers automatically reconnect to the modem/router. If I hide the SSID, and then disconnect or reboot, the desktop computer will not automatically reconnect.
I just noticed that the pop up WiFi connection column shows "WiFi-2 Off" -- what does the "Off" mean?
And, why is it "-2" ? My notebook just shows "WiFi', period. (The first image with "WiFi (Off)" was from a previous Windows 8 installation on the desktop computer. I decided to change from EFI-boot to non-EFI so reinstalled Windows 8. I simply used the old image as a quick way to show how the connection name assignment runs away.)
How can i create local WIFI network without having internet access on my pc. This seems to work if I have access to internet but when i disconnect internet connection my PC ( virtual router ) cannot see anymore other devices..
All other devices that are connecting to my virtual hostednetwork are working without any problems expect my pc. What have i missed that my PC where virtual hostednetwork is running cannot see devices in "virtual" network without internet access?
My ISP provides service only via 802.11. I use laptop A most of the time. The captive portal for the service provider only allows one login per account at a time. The policy is intended to prevent multiple people sharing one account. It's just me, I'm the only user, but very occasionally I'd like to have a 2nd laptop access the internet simultaneously. No abuse, just the simple convenience of not having to logout from A if I need to use B for 30 seconds.
What I want to set up seems simple and it probably is:
WiFi Internet <---> Laptop A <---> ethernet cable <---> Laptop B
Such that Laptop B can share A's active WiFi connection without having to request its own unique address from the ISP.
At present, Laptop A has its network interfaces set up so:
- WiFi is connected, active, functional. Selected the "Yes turn on sharing and connect to devices" in sidebar.
- Under the wired network properties IP Version 4, I manually set addresses to be
IP 192.168.10.1
Subnet 255.255.255.0
Gateway 0.0.0.0
Laptop B has only a wired network, set to
IP 192.168.10.2
Subnet 255.255.255.0
Gateway 192.168.10.1
A & B can connect directly to each other, share folders, etc.
What do I need to do in order to get laptop B to transparently use A's WiFi connection? My guess is that A needs to be set up to do some routing between the internet side and the 192.168.10 subnet, and B needs to be set up to look to A as its "ISP" ... but I don't know where to begin.
I want to forget a Wi-Fi network from my network list i windows 8.1 . But when I right click on that network (to forget that network) nothing happens i.e. right click menu does not open.
View 6 Replies View RelatedMy laptop is few months old HP Pavilion g6 OS: Windows 8 uses a ralink rt5390r 802.11bgn wifi adapter.
The wifi was working just fine suddenly it stopped. It detects my home network but every time it tries to connect ends up "unable to connect to this network". It connects to my friends wifi but not mine. And it connects with cable.
There is a red cross on the wifi network but it's green not GREY. It is not a modem problem because the other PC connects just fine. When I'm on wifi, cmd ipconfig gives me disconnected media for all the network cards on the laptop. Command netsh shows failure and access denied.
What I have tried to do for the past week :
I upgraded the adapter/ driver. My windows is fully updated. I re-installed the network card. I tried a USB wifi. I uninstalled the private server. I uninstalled my Norton because I thought it was blocking the connection I also deactivated the windows fire wall. I changed the SSID and PSW ... nothing worked. and of course I tried restarting, resetting, rebooting, deactivating and activating, disabling and enabling every single thing but nothing works.
I'm having a serious problem trying to connect my other laptops running windows 8, the host laptop that is connected to internet with modem is Compaq Presario g56 laptop also running windows 8, I'm connected to the internet with my evdo modem and this laptop is browsing fine, I download mhotspot to share this connection, this other computers are connected but showing limited connection in their network and sharing panel, the modem have access to internet and the private network I created on the host computer also show access to internet, so why are other computers connected to this computer are not browsing with this internet connection. attached is the screen shot of the host computer this problem had been persistent for more than one week
View 2 Replies View RelatedI just bought a msi s30 laptop yesterday. So everything went fine when I test the wifi connection before I go to sleep. When I say fine, I mean I could connect to the internet. Then when I woke up this morning, I turn on the wifi but it says "no network found". I check the router and it is working perfectly fine. I also checked the device driver and its also working properly.
View 5 Replies View RelatedReinstalled lan driver and it is not showing in device manager. This is an acer aspire v3-371. Light doesn't come on when I toggle fn-f3 combo.
I think there is a service that is not running or it has been deleted. The driver files seem to have installled but it doesn't show under network adapters in device manager.
I have a new windows 8 machine (Dell Inspiron 2350), and there is a problem with the WIFI keeps disconnecting. I have determined that it seems to primarily happen whenever I am downloading any large files. When the computer is sitting idle or I am just browsing it doesn't seem to happen.
I do not have any such issue with my Windows 7 laptop or mobile devices.
I have already tried all the suggestions found elsewhere about changing the power management settings, and have already disabled "allow computer to turn off this device to save power".
I already have the latest driver, and have updated the bios.
I have a brand new Lenovo Ideapad Z585. It has a Broadcom Wireless adapter that will not connect to my home wireless network. I have tried everything I can think of to get it to connect to my Netgear router.
When I run Windows diagnostic tools it tells me that there is a problem with the wireless access point, there isn't I am using another laptop with no issues.
I have done a rescue install and gone through the same problems. This time the diagnostic report tells me I have not chosen a network to connect to despite entering the usual SSID, security type and password details in the network centre.
Networks are detected OK, I click on my network, am asked for the password and weither I wanted to share on the network, click ok and after a couple of seconds I am advised 'could not connect to network'
I have spent about 6 hours today trying to resolve this. The ethernet works fine.
I am completely ignorant of WIndows 8, this being my first computer to use it.
I recently bought a new desktop PC. I've had it a few weeks and for some reason I've recently been having trouble with the wireless. I can verify that the problem is with the computer, as my old laptop, my phone, and other devices all seem to be doing fine and don't experience the same problem. As the title says, every few minutes, the WiFi stops. It doesn't go completely, it simply changes to the picture with the asterisk (*) in the bottom right. This happens for only a couple of seconds before it goes back to normal. Then, it will happen again after a few minutes. This is completely infuriating when trying to watch videos online.
Sometimes when I use the troubleshooter it finds a problem with the WiFi adapter and resets it, and then says the issue is fixed.
i`ve heared a lot of hacking wifi passwords and i wonderd is that ever possible or it is just a joke???
View 4 Replies View RelatedI have my ethernet cable connected right now, but I can't even load my wifi connections at all. I live in apartments so everyone around me has wifi and my phone and iPad is clearly connected, but it won't load any connections.
View 3 Replies View RelatedYesterday I purchased a new Dell Laptop. In the setup and configuration the unit found my wireless network. I have two other PC's (not windows 8) two Kindles, two Cell phones and an IPAD on this router and all the Dell would say it it can't connect to this network. It won't ask for the passkey, it provides no additional information and I can't get online in my own network with this system. I can however log on to a neighbors unsecured network effortlessly.
I am using an old airlink 101 wireless router that has been trouble free for several years. I tried to log onto airlink for a support inquiry but they no longer provide support for this model.
I was playing a game on my laptop and decided to switch from wifi to ethernet. I plugged in the ethernet and turned off the wifi switch to ensure it switched over, but later when I tried to turn wifi back on, I see the wifi on/off switch is grayed out.
I went to my device manager to check for wifi network adapter driver updates, but everything seemed pretty up to date.
Any recommendations on how to fix this? Or at the least another method of turning the wifi on, like through command prompt or something?
Sometimes when I am working on my laptop doing whatever it just disconnects me out of the blue. It shows this stupid icon and says that there are no connections possible:
At first, I did not know what to do so I just began doing some random things on the network center. Then I figured out how to solve it:
First open network center
Then, Open adapter settings
Disable your Wifi network card
Next, Enable it again
And then your internet connection is back again
Now this works fine on short term, it takes like less then one minute.