I have Windows 8 not 8.1
If I select Control Panel, Network and Internet, Network Connections, and right click Ethernet 1 and select Properties, Internet Protocol Version 4, it shows 'Obtain an IP address automatically' as being selected.
How ever if I go to the DOS prompt and enter ipconfig. My correct fixed IP address is shown.
Why can I not see the fixed IP address using the control panel?
My homegroup wont let me allow devices for some reason. I go to settings in the control panel and try to change it and the window just closes then I go to windows 8 settings in homegroup and I see this (attachment) and its grayed out and locked. What do I do?
View 5 Replies View RelatedI generally create a hosted network with this command:
netsh wlan set hostednetwork mode=allow ssid=foo key=foo
netsh wlan start hostednetwork
However, after running that script and restarting, it is unable to set the IP address (See screenshot).
Also, there are many logs in Event Viewer which says this: The DHCP allocator has disabled itself on IP address 169.254.212.34, since the IP address is outside the 192.168.137.0/255.255.255.0 scope from which addresses are being allocated to DHCP clients. To enable the DHCP allocator on this IP address, change the scope to include the IP address, or change the IP address to fall within the scope.
I need to get this hosted network up and running!
Is it possible to set MY Ethernet IPv4 Address as xxx.xxx.0.2 - as of now it's xxx.xxx.0.9 ....
View 9 Replies View RelatedWiFi does not have valid ip address....
View 1 Replies View RelatedI own a Wifi connectivity from an ISP whose login method is to 1st connect to the wifi network and then login to its own website, after which only it allows to surf the net..
A couple days ago, there was a big storm outside my plcae and the connectivity was down for 1 day.. When the connectivity was restored, i found that the IP address generally used by my laptop was changed somehow..
To test it, i used another laptop in my house and tried to connect to the internet while already logged on from my own laptop to the ISP's website...
Since the spare laptop was connected to an IP address different than the one my laptop was using, It again threw me back to the ISP's homepage where i have to login again to surf the web...
However, when i try to login there, it gives out the error that the user id is same but the ip is different and hence i am not allowed to login in... All this while i can use net on my own laptop...
Similar is the case when i try to connect it to my iPhone... Same thing as here also, the ip address is different than the one used in my own laptop...
I tried to renew the lease by using command prompt and it gave me a message "No operation can be performed on Local area network/bluetooth device/ethernet while it has media connected!
My wifi router is of Linksys! Also, I reseted my router using the reset button.. Didnt work.. And when i say that the ip addresses are different on 2 laptops, i mean that the 1st two are same, but the 3rd and 4th are different1. And I am unable to login to my router's website of 192.168.1.1 ....
I was looking around in the control panel and I found the system section. It had a part in it that showed my product key. Is this my actual product key for reinstalling or is it an identifier? I do like it that I can find it on OEM PCs but I don't want people looking through my control panel for it.
View 9 Replies View RelatedDoing a general search is no longer bringing up the control panel. How to find it otherwise?
View 3 Replies View RelatedI use a wireless network which utilizes MAC address filtering for security purposes and WEP encryption. I have a MAC address which is white listed on the network and am successfully able to access it by spoofing in my windows XP PC.
However, windows 8 has been giving me headaches since the last week because it simply refuses to alter the mac address to anything with the first octet being '00'.
I am using Qualcomm Atheros AR5BWB222 and TP Link WN7200ND devices. looking for a way in order to alter the MAC in my windows 8 or some way to scan the network with my windows XP PC and find out some other white listed MAC addresses from the router by LINUX or whatever means possible
Can I use airodump -ng on windows somehow (I don't know linux much) to sniff the whitelisted macs?
I am trying to change the ip address manually. to unbrick my router. so I go to my network and click properties to change the tcp ect. and the famous Unexpected error accured pops up. I try all the regsvr32 ect. stuff and nothing works. I have windows 8 pro.
View 4 Replies View RelatedI have HP Pavillion DV6-2120EM notebook and I have some problems. My lan mac is all 00:00... if enibody had that problem and how is solve this ?
I try to reinstall windows and that not work lan mac is still 00:00:00:00:00:00
I using window 8.1, I can recall the Window Control Panel was on the desktop at one time, do not know if I did sometime to delete it or not, What I am asking is how do I get it back on the desktop, instead of going to the start button and right clicking to get it too open up..
View 3 Replies View RelatedNo Control Panel in Apps with Metro UI
When I search Apps either by scrolling or typing in the Apps search box, I do not have a Control Panel.
The tut from Shawn shows one but I sure don't have one.
I have a Control Panel when I select Desktop.
What have I done?
I don't now how long this has been this way because at the very first I switched, via regedit, the default to the Win 7 type of desktop. After getting all programs installed and setting made to my preferences, then I switched to Metro.
Thought I would work thru a couple of the tutorials which is when I discovered no Control Panel App.
When I try to create a HomeGroup I go through the steps by going into the control panel, click HomeGroup then create HomeGroup, click next, select what to share click next and I get
Windows can't setup a homegroup on this computer.Click to expand...
After the 8.1 windows update that happened last week, my control panel is gone for Nvidia, card works properly but I cant not see the settings, when I try to open it says " You are currently using a display attached to an Nvidia GPU , settings are not available.
I am using an external monitor but it was working JUST FINE LAST WEEK
Control panel stays minimized windows 8.1. How can I maximize it so I can view it? Please do not say click on it in its minimized state coz that isn't working.
View 1 Replies View RelatedI have several control panel items that do not open. I get a message indicating that they are looking for an associated program.
After some research I figured out how to create a shortcut that opens the control panel item (example:firewall.cpl) by using its canonical name, and its GUID. Example I created a shortcut for default items using "C:Windowsexplorer.exe shell:::{17cd9488-1228-4b2f-88ce-4298e93e0966}" as the target.
However, I really would like the control panel to work properly. I don't know how to move the shortcuts I have created for the *.cpl files that no longer work into control panel. Alternatively, I would like to know if there is a way I can automatically "refresh" my system (without having to reinstall Win 8) so the control panel items work properly.
Just recently I've been having some issues with my Control Panel. When I open it, it is completely blank. I've let it be for at least 9 hours, and the same thing persisted.
I've created a video to demonstrate the problem.
I update my GXT 650 driver to 326.01 thru' windows update on my Win 8.1 Preview. Nvidia Control Panel (thru' context menu) is dead. How can I reinstall Nvidia Control panel?
View 2 Replies View Related[URL]...Is saw this picture in somewhere on the internet
But I don't know how to do that
And it's look really good .
if anyone know how to change the picture like this tell me please
I switch Control Panel to category view close out, re-open and its back in the other view. I try switching it to category view, restarting the computer and it back to the other view. How do I get it to stay in category?
View 9 Replies View RelatedSince updating my HP Pavillion 64 bit to Windows 8.1, I have been unable to use an HDMI cable or reduce the computer brightness. I figured it would be a simple fix: restore to before the update, and wait for the bugs to be worked out. However, every time I attempt to access the control panel to perform a system restore, the entire OS freezes. Update: I tried to power on my computer just now to no avail. Stayed on the HP loading screen for 30 min.
View 1 Replies View Relatedmy PC running Win 8/IE10 . At random times during the day, I lose the Hard Drive/ DVDDrive Icons in the "My Computer" and all icons in Control Panel . On both pages I just get a blank screen with "Empty Folder" message, and a blue "Search Bar" at the top. Also, when the fault occurs, I lose all the Thumbnail Icon pictures of my Photographs, leaving justa white square with the name of the photograph beneath.
If I double click on the white square, the photograph appears normally jn Windows photo viewer.
Rebooting returns the PC to normal for a couple of hours maybe, but eventually the fault will reappear.
I have run Kaspersky AntiVirus, MS Disk and Registry , but all report "No Problems". Tried to run scan now but keep getting 'try as administrator' when I am the administrator ?
I was attempting to change my DNS via the control panel when I uncovered this issue, better shown not spoken:
In attempting to fix this, i've restarted my system at least 20 times. Also, while likely irrelevant, I've been getting these errors on startup:
As well known the Win7 START menu does not exist any more in Win8.
How do I access the Control Panel preferences now in Win8?
How can I remove McAfee from my new Windows 8 Toshiba computer. I can't find control panel, can I just delete the folders ?
View 4 Replies View RelatedHow to add control panel shortcut to all apps menu? I have a shortcut placed in the start menu folder. its C:WindowsSystem32control.exe but wont show up like al my other items do. I got task manager to work fine but not this.
View 2 Replies View RelatedIs there a way to make a shortcut to open or go to a specific item in the CP? I'd like to be able to do this with a few of my most-used, such as Color and Appearance, for changing taskbar and windows borders colors. I have a macro program that will do it, just wondered if there were direct links to the various items in the CP.
View 9 Replies View RelatedIn DP there was possible to run Immersive CP directly from the Metro tiles, by launching tile with the toothed wheel? Is it possible to add the wheel tile again to Metro in RTM?
Here is the picture of the tile: Control.jpg
I of course know, that ImmersiveCP can be launched differently, but I want this for very special purpose. I don't want to loose time by extracting that from DevPrev.
When I try to connect to a wifi network i try to click on a network from the wifi panel but the connect button doesn't appear the problem started happening just yesterday tried many things no luck ....
View 9 Replies View RelatedI want to configure my router settings. When I try to go to the address 192.168.1.1 via my browser, it doesn't open the router configuration page. I found that I have no "Default Gateway" Address.
Here's what I found from the config/all command in CMD
Host Name . . . . . . . . . . . . : Deviloid-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
[Code] ....
I bought a new android and want to use Wifi through my router. But I need to change the settings from "Bridge" to "PPPoE".