Network / Sharing :: Hosted Network Doesn't Set IP Address
Jun 29, 2013
I generally create a hosted network with this command:
netsh wlan set hostednetwork mode=allow ssid=foo key=foo
netsh wlan start hostednetwork
However, after running that script and restarting, it is unable to set the IP address (See screenshot).
Also, there are many logs in Event Viewer which says this: The DHCP allocator has disabled itself on IP address 169.254.212.34, since the IP address is outside the 192.168.137.0/255.255.255.0 scope from which addresses are being allocated to DHCP clients. To enable the DHCP allocator on this IP address, change the scope to include the IP address, or change the IP address to fall within the scope.
I need to get this hosted network up and running!
View 6 Replies
ADVERTISEMENT
Mar 23, 2013
Windows 8 64. To date all my networking needs are just fine
Though I do have just one last loose end to tie up with the adhoc wifi it just fails after sleep.
View 1 Replies
View Related
Dec 8, 2013
I use a USB modem in Windows 8.1 laptop. I want to share the internet to other devices by creating a hostednetwork. I used the netsh commands to create and start the hostednetwork. The wifi hotspot got created as 'Local area network connection *14. The internet from the USB modem was shared to Local area network connection *14. Other devices are able to connect to this and are getting IP address in the range of 192.168.137.X. The issue is that, the devices are not able to access internet. in troubleshooting this issue.
Don't give the instructions to create a hostednetwork or advice to use 'Virtual router plus'. I have already done all sorts of basic troubleshooting. Everything looks fine, but there is no internet connection to other devices.
I am able to share internet using the same USB modem with same method in Windows 7.
View 9 Replies
View Related
Apr 24, 2014
I want basicly to home host a VPN, and that is what i do at the moment. So i tried with my friend after i did finish the setup (i did setup the VPN in the Windows Networks interface, over "Incomming Connections"), and i did portforward 1723, and the worst is, that when my friend connects upto the VPN from his PC at his home (not Local), to my IP, then it says on my PC he is connected.
But here comes the problems, at his PC, the Network Icon turns into a yellow warning icon, and when he clicks troubleshoot, it says "DNS Server does not respond", but at my PC here, it even says he is connected to the VPN, but also says no connection over IPv4, and the same on his side.
What can we do to get a connections from my PC to his PC, over the VPN, so he can access the Internet over my Internet instead, like lets say he has a blockade on for example www.facebook.com at home (which he of course doesn't has, it is just an example), and he connects to my VPN, as he accesses my Internet instead, he can open www.facebook.com, instead of having it blocked (one of the main purposes for a VPN, and the data encryption of course).
Here some screenshots:
My PC (Language = German):
My Friends PC (Language = Norwegian):
And as you can see on my PC, it says he is connected, and as you can see on his PC, it also says he is connected, but he cant access the Internet, or anything else related to the web. Now prepare for the funny part: We were on Skype, and as he connected to the VPN, and "lost" the Internett Access, we were still talking (i guess that's because Skype still runs over the home network, while the rest tries to access internet over the VPN connection .
View 8 Replies
View Related
Apr 26, 2014
I own a Wifi connectivity from an ISP whose login method is to 1st connect to the wifi network and then login to its own website, after which only it allows to surf the net..
A couple days ago, there was a big storm outside my plcae and the connectivity was down for 1 day.. When the connectivity was restored, i found that the IP address generally used by my laptop was changed somehow..
To test it, i used another laptop in my house and tried to connect to the internet while already logged on from my own laptop to the ISP's website...
Since the spare laptop was connected to an IP address different than the one my laptop was using, It again threw me back to the ISP's homepage where i have to login again to surf the web...
However, when i try to login there, it gives out the error that the user id is same but the ip is different and hence i am not allowed to login in... All this while i can use net on my own laptop...
Similar is the case when i try to connect it to my iPhone... Same thing as here also, the ip address is different than the one used in my own laptop...
I tried to renew the lease by using command prompt and it gave me a message "No operation can be performed on Local area network/bluetooth device/ethernet while it has media connected!
My wifi router is of Linksys! Also, I reseted my router using the reset button.. Didnt work.. And when i say that the ip addresses are different on 2 laptops, i mean that the 1st two are same, but the 3rd and 4th are different1. And I am unable to login to my router's website of 192.168.1.1 ....
View 9 Replies
View Related
Dec 24, 2013
windows 8.0
I was happily using file history, it was backing up to my G partition, which is located on my second hard drive (both drives are internal)but now I get error message:
I think the problem is that this partition got added to my user, that's what the network path shows:
How do I get it out of my user, and back on a normal path?
View 1 Replies
View Related
Dec 15, 2013
I re-installed Windows 8 yesterday evening (thought it would be quicker than to cleanup and fix my old install) and then directly upgraded it to Windows 8.1. The problem I am experiencing is quite weird: The Operating System doesn't detect the network cable.
With that being said, do not jump straight to the "Did you turn it on and off again" questions. Here is what I have done so far:
Hardware-Side: Cross-check the cable with another computer --> Working fineCross-check the wall plug with another computer --> Working fineTest the connection with the BIOS's connection diagnostic utility --> Link detected
Software-Side: Checking if Windows was up to date --> Nothing to updateUpdating the motherboard's BIOS --> Not betterUpdating the LAN's drivers with the ones I found on the manufacturer's website --> Not better
I am wondering what is wrong with my installation. It was working A1 a few days ago, except for the issues I re-installed the operating system for.
View 4 Replies
View Related
Aug 21, 2013
my network connection on my laptop. I recently moved up to my college and am now on their network. However, I didn't have this problem at first. But recently if I go to my network connections, there is always a wired connection listed named "Unidentified Network" which has "Limited" access. The problem here is that I am not connected to any wired networks. There is no cable plugged into my computer so I don't understand how this is possible. The only thing I have installed recently is Virtualbox, just in case that could affect it.
View 5 Replies
View Related
Jul 28, 2014
Is it possible to set MY Ethernet IPv4 Address as xxx.xxx.0.2 - as of now it's xxx.xxx.0.9 ....
View 9 Replies
View Related
Dec 18, 2013
WiFi does not have valid ip address....
View 1 Replies
View Related
Dec 3, 2013
I have Windows 8 not 8.1
If I select Control Panel, Network and Internet, Network Connections, and right click Ethernet 1 and select Properties, Internet Protocol Version 4, it shows 'Obtain an IP address automatically' as being selected.
How ever if I go to the DOS prompt and enter ipconfig. My correct fixed IP address is shown.
Why can I not see the fixed IP address using the control panel?
View 6 Replies
View Related
Jun 25, 2014
I use a wireless network which utilizes MAC address filtering for security purposes and WEP encryption. I have a MAC address which is white listed on the network and am successfully able to access it by spoofing in my windows XP PC.
However, windows 8 has been giving me headaches since the last week because it simply refuses to alter the mac address to anything with the first octet being '00'.
I am using Qualcomm Atheros AR5BWB222 and TP Link WN7200ND devices. looking for a way in order to alter the MAC in my windows 8 or some way to scan the network with my windows XP PC and find out some other white listed MAC addresses from the router by LINUX or whatever means possible
Can I use airodump -ng on windows somehow (I don't know linux much) to sniff the whitelisted macs?
View 8 Replies
View Related
May 19, 2013
I am trying to change the ip address manually. to unbrick my router. so I go to my network and click properties to change the tcp ect. and the famous Unexpected error accured pops up. I try all the regsvr32 ect. stuff and nothing works. I have windows 8 pro.
View 4 Replies
View Related
Jun 2, 2013
I have HP Pavillion DV6-2120EM notebook and I have some problems. My lan mac is all 00:00... if enibody had that problem and how is solve this ?
I try to reinstall windows and that not work lan mac is still 00:00:00:00:00:00
View 8 Replies
View Related
Apr 21, 2013
I want to configure my router settings. When I try to go to the address 192.168.1.1 via my browser, it doesn't open the router configuration page. I found that I have no "Default Gateway" Address.
Here's what I found from the config/all command in CMD
Host Name . . . . . . . . . . . . : Deviloid-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
[Code] ....
I bought a new android and want to use Wifi through my router. But I need to change the settings from "Bridge" to "PPPoE".
View 2 Replies
View Related
Sep 8, 2013
After much thought I recently did a fresh install of my OS everything was working before just wanted a fresh start.
Since I did the fresh install I'm getting wifi doesn't have a valid up configuration.
This is on a desktop and I can't use a wired connection also I have tried resetting the router. And refreshing windows 8 again.
View 3 Replies
View Related
Jun 1, 2014
Recently I have been intermittently getting disconnected from the internet while gaming / streaming. If I ran the troubleshooter, the error that I got was "Default gateway not available". Resetting my router/modem and restarting the PC every time it happened seemed to resolve this for a while. and is now accompanied by another error saying that "Ethernet" doesn't have a valid IP configuration. This is much more frequent now, every 10-20 minutes or so. I am on wired internet coming from the combo router/modem from my ISP/Cable co.
Attached is my ipconfig /all while working and after the error.
View 4 Replies
View Related
Feb 1, 2014
I know I have the password right and I am definitely in range. Other devices work on the network also. I have the network diagnostics report and a screenshot of my IP configuration included.
PrintWindows Network Diagnostics Publisher details
Issues found "Wi-Fi" doesn't have a valid IP configuration"Wi-Fi" doesn't have a valid IP configuration Not fixed Not Fixed Investigate router or broadband modem issues Failed Reset the "Wi-Fi" adapter Completed
Issues found Detection details
6 "Wi-Fi" doesn't have a valid IP configuration Not fixed Not Fixed
Investigate router or broadband modem issues Failed
If you're connected to a hotspot or domain network, contact the network administrator. Otherwise: 1. Unplug or turn off the device. 2. After all the lights on the device are off, wait at least 10 seconds. 3. Turn the device on or plug it back into the power outlet. To restart a router or modem that has a built-in battery, press and quickly release the Reset button.
Reset the "Wi-Fi" adapter Completed
This can sometimes resolve an intermittent problem. InformationalNetwork Diagnostics Log File Name: 50A11834-7A6E-4778-AE80-BF5F9D81716D.Repair.1.etl
Detection details Expand
InformationalDiagnostics Information (Network Adapter) Details about network adapter diagnosis:
Network adapter Wi-Fi driver information:
Description . . . . . . . . . . : Qualcomm Atheros AR9485 802.11b/g/n WiFi Adapter
Manufacturer . . . . . . . . . : Qualcomm Atheros Communications Inc.
Provider . . . . . . . . . . . : Qualcomm Atheros Communications Inc.
[Code]......
View 1 Replies
View Related
Nov 16, 2013
I have a NAS on my network and I can easely access it in my typing in a password and an username. So far so good. What bothers me is that every time I reboot I have to retype user and password like the first time! How can I make Windows remember this kind of password?
View 2 Replies
View Related
Jun 5, 2013
Randomly, my wifi disconnects many times a day (Limitted conectivity or ), sometimes every 5 minutes. I solve the problem temporarly by:
1.)Running the Troubleshoot of the wifi connection, and it resets the adapter automatically( and at the end of the troubleshotting it says: "WiFi doesnt Have a valid IP configuration, or sometimes The default gateway is not available")
2.)Sometimes the Troubleshooter cant reset the adapter, and I have to do it manually.
By resetting the adapter, the problem is solved only temporarily, because I have to do that mayby 20 times a day, sometimes more, sometimes less.
I use Windows 8 on Asus K55 VJ , Intel Centrino 2230 adapter with up to date driver.
View 6 Replies
View Related
Sep 15, 2014
My fully updated Windows 8.1 notebook suddenly will not show any wifi connections when I click on the icon in the system tray (it shows "No Connections are Available", although it is connected, and I can surf and browse normally).
To connect to a new network, I have to manually enter the details of the network, and then it connects. This is something new, since previously it would show all the available networks, and allow me to make a selection (which is normal). What setting could have flipped do enable the above situation?
View 2 Replies
View Related
Jun 19, 2014
The wifi is not working only on my laptop since 2 days! it was working before and it still is working with all other gadgets and other laptops just not working with my HP laptop.it installed some windows update couple of days back.
I have tried
netsh winsock reset catalog (reset winsock entries)
netsh int ip reset reset.log hit (reset TCP/IP stack)"
I have also tried restoring to the last recovery point. Nothing has worked so far.
View 1 Replies
View Related
May 24, 2013
My Internet is fine. I can connect with my iPhone, and with Ubuntu OS.
It's just the button in the bottom right hand corner (the wireless signal bars) doesn't do anything after I click it on my windows laptop.. It happens every so often disallowing me from connecting to the Internet in times when I need it.
View 2 Replies
View Related
Mar 13, 2013
I bought a new laptop HP 650. The wireless was working fine for couple of days until i believe it stopped working after falling into sleep mode according to the user. now, it connects to internet fine when it connects using a cable but with wifi connection, it says limited connection.i have reformatted the computer to factory default settings.
I have tried to run windows network diagnostics and the error it gives me is "WiFi doesn't have a valid IP Configuration.."
The wireless network card is Ralink RT3290 802.11bgn Wi-Fi Adapter. It says the driver is up to date.
View 9 Replies
View Related
May 22, 2013
My Internet connection icon/button (either on the desktop to the right of the task bar or on the settings when you slide in from right) doesn't work...
I mean when I click it it does absolutely nothing. Also, when I open the network and sharing center after clicking change adapter settings it loads forever.. I've got work to do and I need the Internet.. I don't know what to do I can't keep switching to Ubuntu..
View 1 Replies
View Related
Mar 31, 2013
I recently got windows 8 and have found it to be rather volatile. I use WiFi in my house on my desktop Intel PC and my computer strangely sometimes works to get to the internet and sometimes it doesn't coming up with connection limited and after troubleshooting it "doesn't have a valid ip configuration". Ive tried the netsh winsock and the ip reset commands in command prompt (admin) and nothing happens i'm really at a loss. According to some people A/V programs can mess stuff up so i uninstalled them.
Microsoft Windows [Version 6.2.9200]
(c) 2012 Microsoft Corporation. All rights reserved.
C:Windowssystem32>ipconfig/all
[Code]...
View 3 Replies
View Related
Aug 7, 2014
Nothing would fix the problem ""Ethernet" doesn't have a valid IP configuration".
After playing a match in "League of Legends" with my desktop I noticed my ping went up and I disconnected right after, I looked at my network icon in the taskbar and saw an yellow error mark. I clicked on the network icon and it said "Unidentified Network" and "Limited". I tried to troubleshoot the problem and the problem found was: "Ethernet" doesn't have a valid IP configuration. I ran ipconfig with the cmd tool and I noticed Ipv4 Address was 169.254.171.146 (As ive heard that means windows is using a default ip by itself).
I have a lot of devices in my house like laptops and smart-phones that work perfectly good. One thing that did work was sharing 3G internet from my iPhone to my desktop via usb.
Solutions tried: Resetting router, disabled the "allow computer to turn of this device to save power" in ethernet options, tried different cables, restarting pc and updated drivers (installing the driver to a usb from my laptop).
View 3 Replies
View Related
Jul 20, 2013
I have a relatively new HP Envy (H8-1485ea), with no modifications made, running windows 8. I have had the been using it with a wired connection at university with no problems and on return home connected wirelessly. Initially I encountered no issues, however after about 2 days the status of the connection went to limited and has remained that way since.
On running the windows troubleshooter it stated that the "wifi doesn't have a valid ip configuration".
I searched and found to run the commands which resolved similar problems:
netsh winsock reset catalog
netsh int ip reset rest.log hit
However as shown in the attached image for the second command resetting failed. I have also attached my ip configuration.
View 9 Replies
View Related
Mar 2, 2014
I tried Windows 8 of my desktop from my tablet using Splashtop Streamer. I couldn't get the touch-swipe to work, I'm only able to move the cursor. Is there a checkbox I'm supposed to check to get touch to work from a remote tablet?
View 1 Replies
View Related
Aug 24, 2014
A few days ago I had to restart my PC after a game froze. When I booted up again I found I was unable to connect to the internet. Troubleshooting gave the error 'Ethernet doesn't have a valid IP configuration.'
I can connect to the modem with my laptop using the same cable, so I don't think its an issue with the router or cable. I was told that programs could cause issues with the network adapters, so after backing up my data I wiped my computer and re-installed windows from a bootable usb.
Here is the IP config data.
I've run the flushdns file, but it seems to timeout while running the Ipconfig /renew command.
Following instructions from another thread I was told to reset the TCP/IP stack. Running the command gave the following.
From there I followed instructions to use regedit to change permissions, which enabled me to run the command without errors, however I was still unable to connect to the router when my computer reset.
View 2 Replies
View Related
Apr 17, 2014
When I save a file to Onedrive on my computer it doesn't sync. I don't use the Windows 8.1 app, instead when I save I select onedrive. I can't figure it out. Or it will save it but it isnt accessible on other devices. What can I do here?
View 3 Replies
View Related
