I have a NAS on my network and I can easely access it in my typing in a password and an username. So far so good. What bothers me is that every time I reboot I have to retype user and password like the first time! How can I make Windows remember this kind of password?
View 2 RepliesIs there a way to retrieve all the saved Network/WiFi passwords I have connected to in my Notebook?
View 2 Replies View Relatedi`ve heared a lot of hacking wifi passwords and i wonderd is that ever possible or it is just a joke???
View 4 Replies View RelatedI re-installed Windows 8 yesterday evening (thought it would be quicker than to cleanup and fix my old install) and then directly upgraded it to Windows 8.1. The problem I am experiencing is quite weird: The Operating System doesn't detect the network cable.
With that being said, do not jump straight to the "Did you turn it on and off again" questions. Here is what I have done so far:
Hardware-Side: Cross-check the cable with another computer --> Working fineCross-check the wall plug with another computer --> Working fineTest the connection with the BIOS's connection diagnostic utility --> Link detected
Software-Side: Checking if Windows was up to date --> Nothing to updateUpdating the motherboard's BIOS --> Not betterUpdating the LAN's drivers with the ones I found on the manufacturer's website --> Not better
I am wondering what is wrong with my installation. It was working A1 a few days ago, except for the issues I re-installed the operating system for.
windows 8.0
I was happily using file history, it was backing up to my G partition, which is located on my second hard drive (both drives are internal)but now I get error message:
I think the problem is that this partition got added to my user, that's what the network path shows:
How do I get it out of my user, and back on a normal path?
my network connection on my laptop. I recently moved up to my college and am now on their network. However, I didn't have this problem at first. But recently if I go to my network connections, there is always a wired connection listed named "Unidentified Network" which has "Limited" access. The problem here is that I am not connected to any wired networks. There is no cable plugged into my computer so I don't understand how this is possible. The only thing I have installed recently is Virtualbox, just in case that could affect it.
View 5 Replies View RelatedI generally create a hosted network with this command:
netsh wlan set hostednetwork mode=allow ssid=foo key=foo
netsh wlan start hostednetwork
However, after running that script and restarting, it is unable to set the IP address (See screenshot).
Also, there are many logs in Event Viewer which says this: The DHCP allocator has disabled itself on IP address 169.254.212.34, since the IP address is outside the 192.168.137.0/255.255.255.0 scope from which addresses are being allocated to DHCP clients. To enable the DHCP allocator on this IP address, change the scope to include the IP address, or change the IP address to fall within the scope.
I need to get this hosted network up and running!
Randomly, my wifi disconnects many times a day (Limitted conectivity or ), sometimes every 5 minutes. I solve the problem temporarly by:
1.)Running the Troubleshoot of the wifi connection, and it resets the adapter automatically( and at the end of the troubleshotting it says: "WiFi doesnt Have a valid IP configuration, or sometimes The default gateway is not available")
2.)Sometimes the Troubleshooter cant reset the adapter, and I have to do it manually.
By resetting the adapter, the problem is solved only temporarily, because I have to do that mayby 20 times a day, sometimes more, sometimes less.
I use Windows 8 on Asus K55 VJ , Intel Centrino 2230 adapter with up to date driver.
The wifi is not working only on my laptop since 2 days! it was working before and it still is working with all other gadgets and other laptops just not working with my HP laptop.it installed some windows update couple of days back.
I have tried
netsh winsock reset catalog (reset winsock entries)
netsh int ip reset reset.log hit (reset TCP/IP stack)"
I have also tried restoring to the last recovery point. Nothing has worked so far.
I recently got windows 8 and have found it to be rather volatile. I use WiFi in my house on my desktop Intel PC and my computer strangely sometimes works to get to the internet and sometimes it doesn't coming up with connection limited and after troubleshooting it "doesn't have a valid ip configuration". Ive tried the netsh winsock and the ip reset commands in command prompt (admin) and nothing happens i'm really at a loss. According to some people A/V programs can mess stuff up so i uninstalled them.
Microsoft Windows [Version 6.2.9200]
(c) 2012 Microsoft Corporation. All rights reserved.
C:Windowssystem32>ipconfig/all
[Code]...
After much thought I recently did a fresh install of my OS everything was working before just wanted a fresh start.
Since I did the fresh install I'm getting wifi doesn't have a valid up configuration.
This is on a desktop and I can't use a wired connection also I have tried resetting the router. And refreshing windows 8 again.
Recently I have been intermittently getting disconnected from the internet while gaming / streaming. If I ran the troubleshooter, the error that I got was "Default gateway not available". Resetting my router/modem and restarting the PC every time it happened seemed to resolve this for a while. and is now accompanied by another error saying that "Ethernet" doesn't have a valid IP configuration. This is much more frequent now, every 10-20 minutes or so. I am on wired internet coming from the combo router/modem from my ISP/Cable co.
Attached is my ipconfig /all while working and after the error.
I know I have the password right and I am definitely in range. Other devices work on the network also. I have the network diagnostics report and a screenshot of my IP configuration included.
PrintWindows Network Diagnostics Publisher details
Issues found "Wi-Fi" doesn't have a valid IP configuration"Wi-Fi" doesn't have a valid IP configuration Not fixed Not Fixed Investigate router or broadband modem issues Failed Reset the "Wi-Fi" adapter Completed
Issues found Detection details
6 "Wi-Fi" doesn't have a valid IP configuration Not fixed Not Fixed
Investigate router or broadband modem issues Failed
If you're connected to a hotspot or domain network, contact the network administrator. Otherwise: 1. Unplug or turn off the device. 2. After all the lights on the device are off, wait at least 10 seconds. 3. Turn the device on or plug it back into the power outlet. To restart a router or modem that has a built-in battery, press and quickly release the Reset button.
Reset the "Wi-Fi" adapter Completed
This can sometimes resolve an intermittent problem. InformationalNetwork Diagnostics Log File Name: 50A11834-7A6E-4778-AE80-BF5F9D81716D.Repair.1.etl
Detection details Expand
InformationalDiagnostics Information (Network Adapter) Details about network adapter diagnosis:
Network adapter Wi-Fi driver information:
Description . . . . . . . . . . : Qualcomm Atheros AR9485 802.11b/g/n WiFi Adapter
Manufacturer . . . . . . . . . : Qualcomm Atheros Communications Inc.
Provider . . . . . . . . . . . : Qualcomm Atheros Communications Inc.
[Code]......
My fully updated Windows 8.1 notebook suddenly will not show any wifi connections when I click on the icon in the system tray (it shows "No Connections are Available", although it is connected, and I can surf and browse normally).
To connect to a new network, I have to manually enter the details of the network, and then it connects. This is something new, since previously it would show all the available networks, and allow me to make a selection (which is normal). What setting could have flipped do enable the above situation?
My Internet is fine. I can connect with my iPhone, and with Ubuntu OS.
It's just the button in the bottom right hand corner (the wireless signal bars) doesn't do anything after I click it on my windows laptop.. It happens every so often disallowing me from connecting to the Internet in times when I need it.
I bought a new laptop HP 650. The wireless was working fine for couple of days until i believe it stopped working after falling into sleep mode according to the user. now, it connects to internet fine when it connects using a cable but with wifi connection, it says limited connection.i have reformatted the computer to factory default settings.
I have tried to run windows network diagnostics and the error it gives me is "WiFi doesn't have a valid IP Configuration.."
The wireless network card is Ralink RT3290 802.11bgn Wi-Fi Adapter. It says the driver is up to date.
My Internet connection icon/button (either on the desktop to the right of the task bar or on the settings when you slide in from right) doesn't work...
I mean when I click it it does absolutely nothing. Also, when I open the network and sharing center after clicking change adapter settings it loads forever.. I've got work to do and I need the Internet.. I don't know what to do I can't keep switching to Ubuntu..
Nothing would fix the problem ""Ethernet" doesn't have a valid IP configuration".
After playing a match in "League of Legends" with my desktop I noticed my ping went up and I disconnected right after, I looked at my network icon in the taskbar and saw an yellow error mark. I clicked on the network icon and it said "Unidentified Network" and "Limited". I tried to troubleshoot the problem and the problem found was: "Ethernet" doesn't have a valid IP configuration. I ran ipconfig with the cmd tool and I noticed Ipv4 Address was 169.254.171.146 (As ive heard that means windows is using a default ip by itself).
I have a lot of devices in my house like laptops and smart-phones that work perfectly good. One thing that did work was sharing 3G internet from my iPhone to my desktop via usb.
Solutions tried: Resetting router, disabled the "allow computer to turn of this device to save power" in ethernet options, tried different cables, restarting pc and updated drivers (installing the driver to a usb from my laptop).
I have a relatively new HP Envy (H8-1485ea), with no modifications made, running windows 8. I have had the been using it with a wired connection at university with no problems and on return home connected wirelessly. Initially I encountered no issues, however after about 2 days the status of the connection went to limited and has remained that way since.
On running the windows troubleshooter it stated that the "wifi doesn't have a valid ip configuration".
I searched and found to run the commands which resolved similar problems:
netsh winsock reset catalog
netsh int ip reset rest.log hit
However as shown in the attached image for the second command resetting failed. I have also attached my ip configuration.
I tried Windows 8 of my desktop from my tablet using Splashtop Streamer. I couldn't get the touch-swipe to work, I'm only able to move the cursor. Is there a checkbox I'm supposed to check to get touch to work from a remote tablet?
View 1 Replies View RelatedA few days ago I had to restart my PC after a game froze. When I booted up again I found I was unable to connect to the internet. Troubleshooting gave the error 'Ethernet doesn't have a valid IP configuration.'
I can connect to the modem with my laptop using the same cable, so I don't think its an issue with the router or cable. I was told that programs could cause issues with the network adapters, so after backing up my data I wiped my computer and re-installed windows from a bootable usb.
Here is the IP config data.
I've run the flushdns file, but it seems to timeout while running the Ipconfig /renew command.
Following instructions from another thread I was told to reset the TCP/IP stack. Running the command gave the following.
From there I followed instructions to use regedit to change permissions, which enabled me to run the command without errors, however I was still unable to connect to the router when my computer reset.
When I save a file to Onedrive on my computer it doesn't sync. I don't use the Windows 8.1 app, instead when I save I select onedrive. I can't figure it out. Or it will save it but it isnt accessible on other devices. What can I do here?
View 3 Replies View RelatedI'm using an ethernet cord to connect to my internet and it has been working well until Thursday morning when I turned on my laptop (Windows 8) to see a yellow triangle sign in the bottom right hand corner, in front of the ethernet connected symbol. Since then I haven't been able been able to access the internet from my computer. When I hover over it, it says that it is an "Unidentified network" and there is "No internet access". I've run the Windows 8 troubleshooting and it says that the problem found was ""Ethernet" doesn't have a valid IP configuration", but I'm unsure how to fix it.
I'm thinking that the problem is to do with my computer rather than my network, because I've tried another laptop (Windows 7) through the same ethernet cable and connection and the internet works fine on the other laptop. I've tried so many fixes that I've found online, with none of them actually working. Yesterday I even tried a full system reset, where I reinstalled Windows 8, repartitioned and wiped everything off the hard drive, but it still appears have the exact same problem.
Today I also purchased and tried a new ethernet cable which didn't work, so I then purchased a USB to Ethernet adapter, to make sure that it wasn't my ethernet port on my laptop that was faulty. That didn't work either, and the same problem still remains.
I've had my modem connected straight to my computer via ethernet cable and never really had any problems. I recently downloaded itunes to listen music on my ipod and i know this probably isn't the problem but weeks later i was prompted to download an update for itunes and of course I clicked restart after update but start up computer and internet did not work. It was this "Ethernet doesn't have a valid IP configuration."
I've tried resetting the modem and nothing. It is worth noting that I reformatted to see if it would fix it but nothing. but once i connect my modem directly to my laptop it works perfectly fine. I also including attachments so i could possibly be better assisted. Also worth noting my motherboard is a Asus crosshair formula IV which unfortunately doesn't have updated windows 8 drivers but never gave me problems before. the ipconfig with black background is the laptop ipconfig.
Windows 8.1 does not allow to reuse old passwords. i am aware of the problems involved. still i would like to do so. where can i reset/delete the password history?
View 5 Replies View RelatedMy computer is going to the lab.
However, it has logon details, including email's password.
I don't want the techies call me and ask for the password.
Sometimes when web sites logon automatically with your password - these passwords have to be stored somewhere - and transmitted. Since these are often transmitted in the URL anybody can intercept your data if they are so inclined - so a hacker doesn't even NEED to use any password cracking technology -- just using your data stream presumably they could logon to your Bank account and empty it.
How the system works but the password (encrypted) has to be transmitted in the data sent to the target website and most of the data string is initially sent as a string in the URL.
Explain either is this TRUE - or is it FALSE. In any case especially with Banks etc I always set to completely logoff -- however it doesn't prevent the essential weakness that a string is sent to the target web site over the public Internet and this string can be intercepted - and replicated.
I have a DELL Inspiron 15R touchscreen with WIN 8. First exposure to WIN 8 but I am learning to adjust. I have Administrator and one User Account set up. Every few weeks, the User Account says "password expiring" and I have to change the password. Is there a way to remove this time parameter? Admin account does not seem to require it.
View 3 Replies View RelatedI've got a sony viao ultra book running Windows 8.1. My user account is set to open with a four digit pin. Unfortunately, although I know the PIN number, I have forgotten both the user and the admin password. So I can't load any new software as it asks me for the admin password every time. How to retrieve both passwords?
View 7 Replies View RelatedMy Windows Explorer browser has been losing all my website log ins and passwords. I need to re-enter the information.
I always click the tab for saving the log in for every time I use it.
is it possible to disable option to remember passwords for each site ? It really annoys to me answer on any new site login to choose not for this site, Chrome has option to disable this, but haven't seen ut on IE?
View 2 Replies View Related