I have wifi network in my room and i have to share it with my friend. But he uses it for torrent etc.
So how can i setup OpenDNS only on his pc(not on wifi router) and set up filter after that?
I recently did a clean install of Windows 8.1 x64. I have a Synology DS213+ NAS server in my LAN. Before doing the clean install (had Windows 8 installed before), all hardware being identical, I could launch setup programs from the NAS volume without any problem.
Now, after the clean install, I get an "Incorrect parameter" error when trying to run setup.exe files from the NAS. Some other exe files, like small programs that only consist of one exe file, can be run without any problem.
The following things have been ruled out so far:
- When first copying the installation files from the NAS to a local hard drive, they can be run without any problem, so it's not the installation files being corrupt. Also tried with many different installation packages.
- I can directly launch the same installation programs from other computers in the same LAN, without the need of first copying to their local hard drive.
- If I am in front of the computer causing trouble and run the same installation package from another computer in the LAN (having copied the files there in the first place) I can also execute the setup without that error.
- The NAS firmware or configuration has not been changed.
- The hardware of my main computer causing trouble in question has not changed.
- It does not make a difference whether the setup.exe on the NAS is accessed through the network drive letter of the location or whether I browse to the location via the network address, e.g. //MYNAS/Software/setup.exe
==> Hence it must the software (Win 8.1) and its configuration. And it has also to do with the interplay of the computer with that particular network share.
I want to connect 2 computers together to send data from one to the other. Then I'll copy a partition to an empty computer.
View 1 Replies View Relatedhow to setup skydrive. I have always used Drop Box in the past, but with windows 8.1 and my xbox one, I want to start using Skydrive. Few questions. How do most people set it up? Do you use your default My Documents folder for skydrive? Or do you create a separate folder just for skydrive stuff? What kind of things do you have in your skydrive folder? I would imagine many people would stick with just documents and pictures.
View 1 Replies View RelatedHow to set up a dialup or DUN connection in Windows 8.1?
View 1 Replies View RelatedI have an iPhone 4 and it has the ability to share its 3G data connection over USB (or WiFi)
When I had Windows 7 and I put the option to share over USB, the minute I put the iPhone 4 in over USB, the connection would automatically be detected and used. But with Windows 8, I am forced to use the WiFi feature which is bad for my battery and speed and I wouldn't prefer this of course.
How to set up Windows 8 to use the internet connection over USB?
I'm trying to discover my Wi-Fi enabled printer (Brother MFC-J425W) by trying to plug in the ip address of the printer manually. I am currently using this online reference - How to install a Standard TCP/IP Printer on Windows 8? - Welcome to TP-LINK - to go through the particular process. When I open up the advanced printer setup window in the hardware & sound category of the control panel, it starts searching for printers and then freezes on that task. I cannot press the next, cancel, or quit ('x') button at the top right of the screen. This is a brand new laptop that I just got in today with some top of the line hardware for its class, and I am currently connected wirelessly to the same network that the printer is on, so there should be no issue as far as I'm aware of on the discovery of the printer.
View 3 Replies View RelatedI'm trying to set up my router to the new internet connection and get the wifi going but for the life of me I cant get it set up. The internet connection itself is fine, from modem to pc. Once I have the modem in the mix,it gets no/limited connectivity and cannot reach the setups. I have tried the classic 192.168.2.1 and 192.168.1.1 and about 5 other variations, along with 'http://router'. My router is a Belkin N300 Wireless N Router. If I use a command prompt and do 'ipconfig', there is no ip address beside 'gateway default' once the router is connected. I have reset my router to factory settings. I've tried using a static ip address for my computer [though not sure if i did it correctly]. My DHCP is enabled.
View 6 Replies View RelatedTrying to find the checkbox to connect automatically to my wireless network - it doesn't seem to be in network properties etc.
View 2 Replies View RelatedI install Windows 8.1 Enterprise x64 someday ago. but I can't connect my Internet connection via Modem. in windows 7 I can connected it easily, but now I can't.
View 5 Replies View RelatedIm looking for a way to have wifi access per user for example one user can have access to wifi while another user cant have access. (Currently Using Windows 8)
In Windows 7 I used this method (Profile types) to allow wifi per user and it works great. How to Enable User-Specific Wireless Networks in Windows 7 But in Windows 8 I cant seem to set wifi access per user.
I am trying to share a specific folder on my Windows 8 computer with my Windows 7 computer. They are both on the same network connected to the same router. The Windows 8 computer is connected through ethernet, while the Windows 7 computer is connected wirelessly.
Here are my settings on my Windows 8 Computer:
This is the error I get on my Windows 7 computer:
What's up with this? On a related note, is it possible to share this folder with a specific PC, rather than "Everyone" on the network?
I am having trouble with ICS on win 8. On my old laptop (win xp) I used to be able to share my 3Connect dongle internet to connect to Xbox live. I recently got a new laptop with win 8 and whenever I share this internet connection I can never connect on my Xbox (the network to internet part fails). When everything is connected up and shared the Ethernet says 'Unidentified Network' which i believe is the cause of the problem. I've read i may require a driver update but i cannot seem to find one.
My Laptop: Toshiba Satellite C855-29N
what to do, maybe i am not setting up the connection sharing properly?
I've been trying to set up an old Savin 9033 printer through the company's router, but I couldn't find the network it's set up on from any other computer.
So I pull up Network & Sharing, see that Network Discovery is turned off.
I check it, go to click on "Save Changes" and nothing happens. I click it a few times and it kicks me back to the previous page, nothing saved. No password prompt or anything.
I double checked that all the appropriate services are running (DNS Client, SSDP Discovery, UPnP Device Host, Function Discoveryr Resource Publication, etc.) and made sure Network Discovery was allowed through Windows Firewall.
Is there a way to setup network profiles or something so that when I bring my Surface Pro to work and connect to the wireless network there it will use the static ip address I have but when I disconnect and then connect to my home wifi it will go back to DHCP? On my MacBook Pro I can go into the network settings and change the location profile I have setup for networks but I don't see anything like this for Windows 8.
View 4 Replies View RelatedThis morning I installed an optional update from Windows Update. It was Ralink Technology WLAN 802.11 wireless LAN card.
Since then, when I try to print to my wireless network printer, the network would disconnect then come back on after a while. The update shows up in Update History as successfully installed but not in the installed updates. System restore is of no support here. The network configuration page shows normal. The web does not appear to be affected. I made a new network connection for the printer but it did not work.
Is there a way to reverse this update or should I uninstall the 802.11 LAN card and let windows re-install anew.
The printer is a HP Officejet Pro 8600e
When you first connect to a new network Windows 8.1 opens up the following window:
I am trying to automate a way so that the answer is always: yes, turn on sharing and connect to devices.
It needs to be automatic without requiring the user to click on the window. This will be used in systems where no keyboard/screen/mouse are present.
Windows 8.1 Pro with Media Center,
Windows 8.1
Comcast Gateway.
Pro Media can access 8.1 Network and Homegroup.
8.1 cannot access ant Pro Media. Network Error "Windows cannot access DesktopUsersPeteDocuments' (or any other folder)
Can access IP4 address.
Windows 8.1 new machine, came with 8, updated to 8.1 then 8.1 Update.
I am trying to get file sharing to work with my win 8 machine and my OS X Server. The computers are on the same network with the same workgroup but I can't seem to connect. I was able to connect with the wife's win 7 home machine until I upgraded it to win 7 Ultimate now it wont connect either.
View 1 Replies View RelatedI am in the midst of the final steps in setting my my new Win 8 system.
I have a Win XP and Win 8 computer on my home network. I believe that I have set up file and printer sharing correctly. I can access the files and printer on the XP system from the Win 8 system. However, when I attempt to access the Win 8 files from the Win XP system, I get a long delay (about a minute or two) and then it asks me for the User Name & Password. I enter them and then and it works fine.
If I try to print on the printer attached to the Win 8 system from the XP system, I get a printer error unless I have already signed in with the ID & PW when accessing files. It never asks me for an ID & PW before attempting to print.
On the Win 8 system, I have selected "Turn off password protected sharing" in the "Network and Sharing Center/Advanced Sharing Settings".
The Win XP system has previously been correctly sharing files and printers with another XP system for some time and I haven't changed any settings on the XP computer.
Both the XP and Win 8 systems are assigned the same Workgroup name.
I want to backup my photos from my computer's D: drive to OneDrive. But when I start to upload them, it says those photos are also available offline. That means, all photos uploaded from my D: drive are also copied to my C: drive. But it wastes my space on the C: drive. All my settings are set to upload photos with online access only. I tried to delete the copied photos from my C: drive but it also deleted them from OneDrive. Is it possible to upload only to OneDrive without copying the photos to C: drive?
View 1 Replies View RelatedOkay, so in Windows 7 I am able to connect my wireless to my phone, and run an ethernet cable over to my Xbox. If I use the ICS feature and configure it under services to allow ports 88 and 53 UDP, it works fine. This also allows my Xbox to seemingly add to this list of ports as it finds necessary.
The issue is however, with Windows 8, although I can connect to Xbox Live the same way, it does not seemingly allow the Xbox to add more ports that it deems necessary. This leads to that NAT error message that I am actually trying to do this as a way to bypass it.
In Windows 7 this only works if the connection is set to Home (not sure about Work), but not public. I'm curious if the reason this does not work in Windows 8 is that Windows 8 does not have a Home option, but rather only Private or Public settings. There is some small setting buried deep somewhere that I just need to change to treat it like Windows 7 allows Xbox to treat home networks and configure/add ports automatically.
I would like to make a folder share from a tablet with windows 8 with password protected to a laptop of windows 7 and another of vista. I have followed the tutorial of File Sharing - "Share with" & "Stop Sharing" in Windows 8. My PCs have been set in the same workgroup and same user account, network discovery and file and printer sharing turned on. At the first time, it is OK for windows 7. However after some changes of account (delete and create them on both windows 8 and windows 7), it doesn't work anymore with the error from windows 7 "Login failure: user has not been granted the requested logon type at this computer" whenever password protected turned on in windows 8 and only OK when password turned off.
View 1 Replies View RelatedMy ISP provides service only via 802.11. I use laptop A most of the time. The captive portal for the service provider only allows one login per account at a time. The policy is intended to prevent multiple people sharing one account. It's just me, I'm the only user, but very occasionally I'd like to have a 2nd laptop access the internet simultaneously. No abuse, just the simple convenience of not having to logout from A if I need to use B for 30 seconds.
What I want to set up seems simple and it probably is:
WiFi Internet <---> Laptop A <---> ethernet cable <---> Laptop B
Such that Laptop B can share A's active WiFi connection without having to request its own unique address from the ISP.
At present, Laptop A has its network interfaces set up so:
- WiFi is connected, active, functional. Selected the "Yes turn on sharing and connect to devices" in sidebar.
- Under the wired network properties IP Version 4, I manually set addresses to be
IP 192.168.10.1
Subnet 255.255.255.0
Gateway 0.0.0.0
Laptop B has only a wired network, set to
IP 192.168.10.2
Subnet 255.255.255.0
Gateway 192.168.10.1
A & B can connect directly to each other, share folders, etc.
What do I need to do in order to get laptop B to transparently use A's WiFi connection? My guess is that A needs to be set up to do some routing between the internet side and the 192.168.10 subnet, and B needs to be set up to look to A as its "ISP" ... but I don't know where to begin.
I've got a new Win 8.1 computer (Surface Pro 3), and on that computer, as an adiministrator, I turn off Password Protected Sharing for my network (Control Panel -> Network and Sharing Center -> Advanced sharing settings -> All networks). Once this is done, the other computers on the LAN have good access to the disks I have shared. However, when my new computer sleeps and wakes up, or even sometimes if I merely close the cover and open it, something has reset the password protected sharing option and turned it back on. The other computers no longer can access the shared data. I have to open up the control panel (as above) and turn password protected sharing off. Again. Many times a day.
How do I get this option to stick the way I set it?
I just bought a Lenovo Y500 a couple of days ago and it came with a pre-installed Windows 8 everything seems working fine but when it comes to Wifi it randomly disconnects a lot , sometimes shows limited access and most of the time the signal strength bars keep going up and down.
View 6 Replies View Relatedwindows 8.0
I was happily using file history, it was backing up to my G partition, which is located on my second hard drive (both drives are internal)but now I get error message:
I think the problem is that this partition got added to my user, that's what the network path shows:
How do I get it out of my user, and back on a normal path?
I have a 20mbps upload with my ISP and I'm getting around 18.5 consistently. I've started using Zoolz for backing up and I have been assured it does not throttle the bandwidth. It reports it is uploading at around 15-16mbps which would be absolutely fine but Task Manager and NetSpeedMonitor show the upload speed as considerably lower.
I've attached a screenshot showing the difference but I was wondering if Task manager and NetSpeedMonitor could be wrong at all? It seemed quite coincidental that the speed reported by Zoolz was roughly what I would expect. Is there any sort of traffic that wouldn't show with Task Manager?
I re-installed Windows 8 yesterday evening (thought it would be quicker than to cleanup and fix my old install) and then directly upgraded it to Windows 8.1. The problem I am experiencing is quite weird: The Operating System doesn't detect the network cable.
With that being said, do not jump straight to the "Did you turn it on and off again" questions. Here is what I have done so far:
Hardware-Side: Cross-check the cable with another computer --> Working fineCross-check the wall plug with another computer --> Working fineTest the connection with the BIOS's connection diagnostic utility --> Link detected
Software-Side: Checking if Windows was up to date --> Nothing to updateUpdating the motherboard's BIOS --> Not betterUpdating the LAN's drivers with the ones I found on the manufacturer's website --> Not better
I am wondering what is wrong with my installation. It was working A1 a few days ago, except for the issues I re-installed the operating system for.
In my network 4 Desktop running windows XP all are connected LAN cable and my modem is tplink and 1 laptop running windows 8.1 pro accessing network through wireless in my laptop network place all the pcs are visible but I am not able to ping them and when I click I am getting message that Network path not found Error code 0x80070035
View 2 Replies View RelatedI have a lenovo G505 laptop - it will no longer connect to my BT home hub despite it showing as being available. I suspect it might be to do with the fact that it is has a passkey - I entered it yesterday when prompted and it connected fine, but now I'm not being given the option of entering the key.
I've also tried connected using the BT wifi (as opposed to homehub) but once again it will not connect me. I've been through all the troubleshooting options, and searched under every term I can think of, but nothing is working.
