Network / Sharing :: Can't Execute Setup / Installation Files From Network
Oct 18, 2013
I recently did a clean install of Windows 8.1 x64. I have a Synology DS213+ NAS server in my LAN. Before doing the clean install (had Windows 8 installed before), all hardware being identical, I could launch setup programs from the NAS volume without any problem.
Now, after the clean install, I get an "Incorrect parameter" error when trying to run setup.exe files from the NAS. Some other exe files, like small programs that only consist of one exe file, can be run without any problem.
The following things have been ruled out so far:
- When first copying the installation files from the NAS to a local hard drive, they can be run without any problem, so it's not the installation files being corrupt. Also tried with many different installation packages.
- I can directly launch the same installation programs from other computers in the same LAN, without the need of first copying to their local hard drive.
- If I am in front of the computer causing trouble and run the same installation package from another computer in the LAN (having copied the files there in the first place) I can also execute the setup without that error.
- The NAS firmware or configuration has not been changed.
- The hardware of my main computer causing trouble in question has not changed.
- It does not make a difference whether the setup.exe on the NAS is accessed through the network drive letter of the location or whether I browse to the location via the network address, e.g. //MYNAS/Software/setup.exe
==> Hence it must the software (Win 8.1) and its configuration. And it has also to do with the interplay of the computer with that particular network share.
View 2 Replies
ADVERTISEMENT
Nov 23, 2013
I upgraded to Windows 8.1 from Windows 8 and I can no longer see the files inside the folders on my networked drive. Before I upgraded I could see them, after the upgrade - not so much. The folders are fine, I can see them, just no files visible. There's no network issues as the files are visible from my Win7 machines and my wife's Windows 8 machine. All the standard default sharing and viewing settings are correct. Even if I put the direct path in File Explorer is tells me there's nothing there. I'm absolutely baffled. I have never seen this particular type of sharing issue before. I'm a pretty savvy Network Admin so the basic troubleshooting (and standard sharing settings) has been covered.
View 6 Replies
View Related
May 9, 2013
How to index files from network drive to Libraries (ex. Music, Photos, Etc.)?
View 1 Replies
View Related
Jan 1, 2014
I can add and use files from a laptop I have on windows 7. However on my desktop running windows 8, I cannot add files to the hard drives attached to my network.
I currently have the Western Digital N700 router, with 1 3 tb backup drive attached.
I can get videos from it or other files, however I cannot add. When I go to drag and drop I am getting the circle with a / through it.
Its difficult to have to use a different computer to upload files.
View 5 Replies
View Related
May 31, 2013
I decided to try a new network card due to problems with my onboard one, got a TP-Link TG-3269 after reading various reviews. most saying it installed in Win 7 with no problems or driver needed.Disabled onboard lan in bios, rebooted with new card in place, but card not recognised in device manager. Surprisingly, when I started windows troubleshooter it started working, it had reused my old onboard drivers even though it's in a PCI slot. but still not recognised in device manager.
View 5 Replies
View Related
Dec 18, 2013
I want to connect 2 computers together to send data from one to the other. Then I'll copy a partition to an empty computer.
View 1 Replies
View Related
Jan 18, 2014
Getting this message every time I start up my computer. Really annoying. I tried deleting my appdata/local/temp and that didn't work. The exe is in a different folder (this time it is in s3ic) every time this pops up, but the folder is no where to be found when I look in appdata/local/temp.
View 1 Replies
View Related
Jan 14, 2014
I am running a qnap NAS in my home network. I can connect to the NAS no issues at all, I can copy small files across the network no issues. However I want to rebuild my NAS so am performing a backup across the network. I want to copy approx 2tb in a single copy. However when I do a select all, copy and paste, it's only copies about 40gb of the data. I am running Windows 8 ...
View 1 Replies
View Related
Aug 2, 2013
Is there a way to setup network profiles or something so that when I bring my Surface Pro to work and connect to the wireless network there it will use the static ip address I have but when I disconnect and then connect to my home wifi it will go back to DHCP? On my MacBook Pro I can go into the network settings and change the location profile I have setup for networks but I don't see anything like this for Windows 8.
View 4 Replies
View Related
Feb 5, 2013
I've got a Synology NAS which has pretty much everything stored on it, I use it for work, and it also has all of my music and video stored on it to share around the house.
When I was running Windows 7, I had the drive indexed so everything appeared in explorer instantly (not waiting for a good few seconds every time I want a file or anything) as if it were on a local drive. On Windows 8, I cannot seem to be able to sort this out. I've been running Windows 8 since launch and am generally happy with it, but this small annoyance is starting to get to me!
I can't remember how I set it up on Win7, but I don't remember doing anything difficult, just clicked through a few things... And I've got everything indexed from synology side (not that I've changed any settings on that since installing Windows 8).
View 3 Replies
View Related
Apr 29, 2014
I have set up homegroup on my 2 computers. A windows 7Home premium and a windows 8.1 on my tablet. Windows 7can see and open windows 8.1 files with no problem. Windows 8.1 can see windows 7 files , but cannot open them .A window pops up asking for credentials. I don't know what to do with that
View 9 Replies
View Related
Feb 27, 2013
This morning I installed an optional update from Windows Update. It was Ralink Technology WLAN 802.11 wireless LAN card.
Since then, when I try to print to my wireless network printer, the network would disconnect then come back on after a while. The update shows up in Update History as successfully installed but not in the installed updates. System restore is of no support here. The network configuration page shows normal. The web does not appear to be affected. I made a new network connection for the printer but it did not work.
Is there a way to reverse this update or should I uninstall the 802.11 LAN card and let windows re-install anew.
The printer is a HP Officejet Pro 8600e
View 5 Replies
View Related
May 19, 2013
I have been trouble sharing files with windows 8. I basically went into network & sharing center and turned all of the options to ON (or yes, whatever lol).
The machines are both running windows 8 on a wifi network.
I noticed a few things: If you right click the wireless network, you can "toggle" and turn on/off file sharing. This is a tad confusing, windows 7 never had this option. Also, do you need to be on a "homegroup" in order to share on windows 8?
There are a million variables!
Variable 1: Variable 1 is comprised of a million different variables and is the "network and sharing center". I Have all options set to "On", and still can't share.
Variable 2: Variable 2 is the right clicking on the WiFi network and clicking "turn network sharing on or off". Mine is set to off at the moment, but why is this separate from variable 1?
Variable 3: The final variable I can think of having a homegroup. I don't have a homegroup setup right now, do I need all machines to be on a homegroup to start file sharing between computers?
What I want: I want to be able to share entire computer contents between machines.
Back in the windows 7 days I used to be able to hit "run" and type in //computerame/c$ and I had complete file access to other computers on the network. How to accomplish that with Windows 8? That way I can access all files, not just "shares" on computers on the network.
PS: Right now, when I try to connect to other machines on the network, I get a username/password prompt. No matter what I input I get an error and it won't work.
View 2 Replies
View Related
Jun 27, 2013
The issue is that I am unable to send files (pictures, in particular) to my laptop via Bluetooth. I have verified that the problem is with my PC rather than my phone by pairing and sending files to a different computer. I have tried everything I know to try, un-pairing and re-pairing, re-installed Intel Bluetooth drivers, uninstalled the phone from Device Manager and re-installed it, made sure the correct services were running, checked firewall settings, and synchronized PIM data.
I am able to send files to my phone from my laptop. After doing a few hours of research, it seems like a handful of folks (me included) do not have all of the Bluetooth options when clicking on the Bluetooth icon from the system tray. The main options I am missing are "Send Files" and "Receive Files".
I started fsquirt and selected "Receive Files", but sending still fails. When selecting "Open Settings" from the Bluetooth icon in the tray, I am taken to a nice little option menu. All of the correct settings are checked, but the interesting thing is that when I click on the "Open Receiving Window" button on the "Shared Folder" tab, absolutely nothing happens. No error, just nothing.
View 1 Replies
View Related
Jan 31, 2013
I have a fresh install of Windows 8 on my desktop computer. However I've run into some major issues with accessing my NAS (Media Server/Hard Drive)
#1 - I cannot for the life of me map my NAS as a network drive anymore.
#2 - This the important one, I can't see over 80% of the files stored on my NAS, only the most recently updated ones. I can see them just fine from my brothers laptop that came preinstalled with Windows 8, and no issues whatsoever with other computers on the networks on Win 7. Is this an issue with fresh installs? If so how can I remedy this?
View 8 Replies
View Related
Jun 21, 2014
Under Windows 7-- whatever bluetooth software I had used to let me connect to my bluetooth enabled phone and browse the memory for pictures, videos, etc to download. I see no such option on Windows 8
View 2 Replies
View Related
Feb 20, 2014
I am struggling with my windows 8.1 and the network settings for the last 2 months. However, I still can not access my shared files from my lan network. There is always a login username/password requested in order to join but It never let me join and see the files. If I input any random wrong login username/password it reports an error. Hence, for some reason the authentication part is successful and something else is wrong. This is maybe a windows 8.1 problem on some restrictions etc.
Actions done till now... Change permissions - added almost everything (users, guests, user, administrator, everyone) set workgroup to name "domain" or "WORKGROUP" or "HOME" homegroup only works for windows7!! Remove the password request check from the network settings
Shared files included in Windows 8.1 Trying to access the files from windows xp, windows 7, linux, android, tv media box...
I will probably add some screenshots soon..
View 7 Replies
View Related
Jun 16, 2014
I have an orange crossover cable that I have connected to both machines and I set up sharing on both but the Windows XP machine doesn't show the 8.1 machine. I'm trying to pull some movies and music off my 8.1 laptop because I use my XP desktop as a media server of sorts.
I can't figure out how to get them to recognize each other and my connection just says "limited."
View 3 Replies
View Related
May 25, 2014
Windows 8.1 Pro with Media Center,
Windows 8.1
Comcast Gateway.
Pro Media can access 8.1 Network and Homegroup.
8.1 cannot access ant Pro Media. Network Error "Windows cannot access DesktopUsersPeteDocuments' (or any other folder)
Can access IP4 address.
Windows 8.1 new machine, came with 8, updated to 8.1 then 8.1 Update.
View 5 Replies
View Related
Nov 19, 2013
I have Windows 8.1 and when I right click on a network file, I do not see "Always Available Online." Have tried to find support online to no avail.
View 2 Replies
View Related
Jul 5, 2013
I have a desktop and a laptop both running Windows 8 and are both members of the homegroup. In File explorer both machines can see the other in the homegroup but when I double click I get a message (on either machine) "This PC is currently unavailable". This has only been a problem since using 8. When I was all windows 7 the homegroup worked perfectly. Both machines have been set up to share everything including the kitchen sink. I must have a setting wrong somewhere. This used to be an intermittent thing. When I had my old desktop (also windows 8) other homegroup machines could occasionally see the desktop but sometimes not!! I have a BT router that on an individual basis works fine. All machines are using the wi fi on the router.
View 5 Replies
View Related
Oct 23, 2013
I thought I had my sharing files figured out,but now I updated to windows 8.1 and cannot open the files I have marked "share with" on my windows 7 computer. I keep getting the box that tells me I don't have permission. I have read/write checked. How do I open them in windows 8.1. One computer has windows 7 the trouble one has windows 8.1.
View 9 Replies
View Related
Apr 1, 2013
I am getting a rather annoying crash occurring in Windows 8 Pro X64.
I have a new PC build and I have changed Motherboard, processor and RAM to AMD Asus Sabertooth Motherboard with 6 core AMD processor and 16 Gig of RAM. It came as a bundle from Overclockers.co.uk so all good there.
Now I disconnected my 3 drive RAID by mistake on the PC before I changed it to Windows 8 from Windows 7 and so rebuilt to new spec and rebuilt the RAID and got the data back onto my Media PC downstairs running Windows 7 Ultimate. Both computers have RAID of nearly 6 TB's. When I copied from my main PC down to the media PC both running Windows 7 I managed to copy across all data with no crashes. I just had to adjust the network so it copied faster at the giga settings and all was fine copying at just over 100 MB/S.
I have shared all folders on both networks as a Homegroup and for everyone to read & write data. Now that I am backing up from the Media PC back to the main one which now has Windows 8 Pro X64 it starts to copy folders and then will crash and reboot. It just comes up with the error windows has run into problems and collects info and reboots. I have attached the mini dump file which seems to relay that the router is the problem but I don't believe that because it does not give problems in any other way.
Do you think that it could be that the network drops out and if so what causes it?
View 1 Replies
View Related
Nov 18, 2013
I'm having a pretty major issue with Skydrive on Windows 8.1. A vast majority of my files are unopenable from Explorer (or the Modern UI app which seems to just open them through explorer in the end anyway). When I try to open one of these files, I receive an error message titled "1 Interrupted Action" and displaying the message:
An unexpected error is keeping you from copying the file. If you continue to receive this error, you can use the error code to search to solve this problem.
Error 0x80040A41: No error description available
I have yet to find anything even resembling a solution when I search for that error code. The options this error window gives me is to "Try Again" which presents a typical explorer progress bar that never goes anywhere or to "skip" or "cancel" which do the same thing. Essentially this means that I have to use the skydrive web client to download the file to some other location locally and then edit and reupload from there. As far as I can tell there also isn't a traceable logic to what files are going to be accessible and which ones are not. I could literally be just finished working on a file, save it, and have it inaccessible when I try to reopen it. This error has not improved or changed at all by my making any files "available offline" or "available online-only" (in fact clicking those options doesn't seem to actually change their Availability that is listed in explorer).
I've used Skydrive for a few years now (since the beta I believe) as my primary cloud storage service, I pay for Office 365, and therefore I have access to a larger amount of storage on Skydrive than I do on other cloud services. I'm using Google Drive temporarily, but its incredibly inconvenient given how invested and reliant I've become to Skydrive.
Any way of resetting or jarring Skydrive on 8.1?
View 1 Replies
View Related
Sep 20, 2013
My new laptop that runs the despicable OS, Windows 8. I'm the ONLY user, the owner AND Administrator of my laptop, but I'm denied access to my own files!! I'm only a casual user, meaning I use my PC for "fun stuff"...i.e. writing & reading emails; playing games & searching the internet for things that interest me. I don't have anything on my PC that has to be "guarded" from others, as NO ONE ELSE uses my PC. That said, I should be able to access EVERYTHING on my PC, but the paranoid screwballs at Micro$oft have set up the most confounding OS, & I'm repeatedly denied accessing things like: Program Files, Pictures (even though I'm the one who put them there!!), Properties, etc. etc.
I know I'm not the only one who's been confronted with these problems, as I've read the same things repeated on sites in the many places I've visited in my attempt to figure out how to break the chains that Micro$oft has put on MY PC. How to change the settings so I can access my own stuff? I don't understand why MY computer is given the authority to DENY ME access to stuff I entered myself. When I couldn't view my OWN Pictures, (that I put here!!!), How I can use my own PC the way I want to...like the "good old days" of XP & even Vista HP?
View 3 Replies
View Related
Jul 25, 2013
Ive been using a method to access my Skydrive files in explorer without the need for the Skydrive app. The process is explained here: How To Map SkyDrive Folder As Network Drive In Windows 8 And RT .
It works great on 1 pc I use but on another it doesn't. The problem is it is only showing the Public folder and nothing else. I cant work out why this is the case.
It accepts my credentials fine and connects the drive it just doesn't show the files there. It also doesn't allow me to upload anything else to the drive.
View 6 Replies
View Related
Nov 5, 2012
I'm on a domain enviroment running on Windows 2008 R2 domain controller, I've just updated my laptop with Windows 8 Pro ( al other PC here are still Windows 7 ) and I'm facing a litle issue with GPO drive maps.
I have many Drive maps object affected to my users that work fines, the problem I have is when I disconect my laptop from the network and reboot, all network drive disappears and I don't have access to any of my "offline" files on those drives.
View 8 Replies
View Related
Oct 29, 2013
I have a PC with Windows 8.1 and a Mac with Mavericks. I have a folder on the Mac that is shared with the PC. When I'm on the PC and I try to open a file that is shared by the Mac, such as an ISO file (a disk image), then I get a message saying that I cannot open the file, or the file is in use (it depends on the app/filetype). I have the same problem when I open a video file. Strangely, text files and PDF files are just fine. And if I copy any of the problematic files to the local Windows disk, then I can open them just fine.
The specific error messages are:
- AVI files opened in VLC: "Your input can't be opened. VLC is unable to open the MRL."
- ISO files opened by Windows Explorer: "Sorry, there was a problem mounting the file."
This only started happening after I upgraded to Windows 8.1 on the PC and Mavericks on the Mac. Mavericks upgraded its SMB version from SMB1 to SMB2, so perhaps that is related?
View 4 Replies
View Related
Dec 20, 2013
Everything I can find to get round this problem involves right clicking on the HD->properties->Security->Owner and then going on to changing a few settings.
There is no owner tab! Is this an 8.1 thing? Have they removed it? Van I get it back?
View 9 Replies
View Related
Sep 5, 2013
I'm running Windows 8, (unfortunately), & I can't access certain files even though I'm the only one who uses this laptop & I'm also the Administrator. I tried numerous times to allow file sharing & change what I thought I should, but I kept getting red-lettered statements saying that I'm not allowed to make such changes.what steps to take so I can get to the files I need. There's no reason why I should be denied access to do anything when it's my own computer!
View 9 Replies
View Related
Aug 10, 2013
I have Laptop and Desktop (windows 7 ultimate) I use it to play games, But I wanna transfer my Games (files) to my new laptop using Ethernet Cable or Crossover cable. I lost my 16 gb USB so I just transfer via Ethernet Cable but How?
View 4 Replies
View Related
