Random Exe Files Trying To Execute When Logging In?
Jan 18, 2014
Getting this message every time I start up my computer. Really annoying. I tried deleting my appdata/local/temp and that didn't work. The exe is in a different folder (this time it is in s3ic) every time this pops up, but the folder is no where to be found when I look in appdata/local/temp.
View 1 Replies
ADVERTISEMENT
Oct 18, 2013
I recently did a clean install of Windows 8.1 x64. I have a Synology DS213+ NAS server in my LAN. Before doing the clean install (had Windows 8 installed before), all hardware being identical, I could launch setup programs from the NAS volume without any problem.
Now, after the clean install, I get an "Incorrect parameter" error when trying to run setup.exe files from the NAS. Some other exe files, like small programs that only consist of one exe file, can be run without any problem.
The following things have been ruled out so far:
- When first copying the installation files from the NAS to a local hard drive, they can be run without any problem, so it's not the installation files being corrupt. Also tried with many different installation packages.
- I can directly launch the same installation programs from other computers in the same LAN, without the need of first copying to their local hard drive.
- If I am in front of the computer causing trouble and run the same installation package from another computer in the LAN (having copied the files there in the first place) I can also execute the setup without that error.
- The NAS firmware or configuration has not been changed.
- The hardware of my main computer causing trouble in question has not changed.
- It does not make a difference whether the setup.exe on the NAS is accessed through the network drive letter of the location or whether I browse to the location via the network address, e.g. //MYNAS/Software/setup.exe
==> Hence it must the software (Win 8.1) and its configuration. And it has also to do with the interplay of the computer with that particular network share.
View 2 Replies
View Related
May 14, 2013
I'm unable get File History to execute. Windows 8 recognizes my external HD which I used to transfer my files from my desktop. It works normally otherwise. When I go to the Libraries page and select "History" button, I then select "configure FileHistory settings" in "Control Panel""File History is Off" and E:drive are displayed. I select "Turn On" and "Yes" to recommend drive to my homegroup. At this point I receive an error message "Could not enable FileHistory" and "The system cannot find the file specified". Folders named FileHistory, Data, and Configuration have been created on the external HD but they don't contain any files. Am I missing an executible file from Windows? If so, how can I get it back. My Toschiba Satellite didn't come with Windows 8 discs.
View 4 Replies
View Related
Jan 29, 2014
Windows or some other program on my computer automatically creates hidden files containing album art or song art in my music folders such as "Folder.jpg" or "AlbumArtSmall.jpg". I'm looking for a way to make this random generating stop because it's messing up my music library in Zune. I use MP3Tag and iTunes to apply song art manually to my songs, but the picture files that appear in the folders replace the song art that I added myself and it messes everything up.
In attempt to fix the issue I disabled all of the automatic album art downloading in "Tools > Options > Library" in Windows Media Player (just in case it was causing the problem) but still nothing. I tried deleting these files but they just come back again after a while.
View 6 Replies
View Related
May 29, 2013
I am the only user of my computer, therefore I cannot change my account to standard instead of administrator, and therefore, I am stuck with the log in screen every time I restart. I would like to disable the log in screen and maybe keep the lock screen, if possible.
View 4 Replies
View Related
Mar 12, 2014
I have Windows 8.1 Pro 64bit and I have 2 LOCAL accounts - First is 'my' account which is administrator and pw protected Second 'Guest' account which dosent have any pw
Most commonly any member of my family goes in my computer under Guest account and here goes the fun..
For example I go to sleep i log out or shut down my pc.. member of my family turns on and in account login automaticly goes to my pw protected account, he/she has to press the little back arrow to show all the users and go inside Guest account. Now he/she has done work he/she shuts down the pc. In the next morning I power on my pc AND HE AUTOMATICLY logs in/goes into guest account, so i have to wait those valuable 5-10 seconds as he loads in(and yes this IS annoying if it happenes once or twice a day), then I need to press sign out and then I can press to my admin account write pw and login into my acc! So basicly he rememberes last user and automaticly logs in, if the user dosent have pw then he proceeds in signing in if it has pw then it stops to a pw..
How to change this? I want when i power on, he goes into account login screen(where he show all the accounts) and when I press the acc I want - as it always has been!
P.S. Log On User Account Automatically at Windows 8 Startup from this turtarial I have check'ed the box from option one step 3, but guest acc dosent have any pw so its useless....
View 11 Replies
View Related
Mar 30, 2013
I've been using my Microsoft account since I purchased Windows 8 back in October. I also have (users must enter a username and password to use this computer) unchecked. I can't figure it out. I feel like I'm the only one having this problem since no search's turn up on Google except for using "control userpasswords2" .....
View 9 Replies
View Related
Dec 14, 2013
Title says it all. You can restart Windows explorer via task manager, but can I do the same with start screen? Because I changed the amount of tile rows on it, but I have to log off. Unfortunately, I am running a server which people are on currently and I'd hate having to wait a couple more hours to try this..
View 7 Replies
View Related
Jun 5, 2014
I've been to hundreds of pages online to try and solve this issue and everybody seems to have the opposite problem I do. When I reach the login page num lock is enabled, which is perfect, but after I sign in the num lock key is disabled. I frequently hit the num lock key by accident so I used Sharp Keys to disable the key entirely and set the initialkeyboardindicators value in the registry to 2.
This was working perfectly until this week and I have no clue why. When I check the registry, the value is set back to 0. Every time I try to set it to 2 it is simply overwritten when I log in. I have also turned off fast startup as I read that on several forums but I have the same issue.
I've looked in BIOS (UEFI) and I can't seem to find any setting that would control this. I changed every entry in the registry for initialkeyboardindicators - I tried both 2 and 2147483650. I also created a new user to see if they would have the same issues but they did.
View 4 Replies
View Related
Oct 25, 2013
Do I have to type password to log into windows each time that I'm using a 8.1 MS account?
I used to rely on skydrive a LOT, but now it seems like:
1) You need to login via a MS account to use skydrive.
2) You need to type your password to your MS account each time you login to windows.
View 9 Replies
View Related
Jun 24, 2014
I know you can open up resource monitor, and look at the disk tab for the information, but, I am looking for a way to log all of that to a file, so I can see over time, how many bytes are written for each process that is running. Anytool that I can do this with?
View 3 Replies
View Related
Nov 25, 2012
I want to be able to use the store and stuff, and you have to be logged into your microsoft account for that. I don't want my computer to have a password though. And if you have your microsoft account as your logged in, then you have to use that password. How can I change this?
View 9 Replies
View Related
Feb 1, 2014
Recently I've been receiving BSOD errors by waking my computer up from sleep mode. I have an log dump attached but I also received a suggestion on the error screen stating "PAGE_FAULT_IN_NONPAGED_AREA".
View 5 Replies
View Related
Nov 26, 2013
So I've been getting tons of BSoDs after logging into my account on Windows 8 with a small chance of logging in successfully
My laptop is a Ultrabook 14z (Inspiron 5423)
i5-3317U
6 GB RAM
Intel HD Graphics 4000
View 4 Replies
View Related
Feb 8, 2014
The user account is automatically logged off from my PC Windows 8 though the antivirus program is still running. Thus, I have to reenter the password to check the program running status. How to prevent user account to be automatically logged off in windows 8? I have already selected Never in the option of Put the computer to sleep.
View 9 Replies
View Related
Feb 4, 2014
A few days ago my laptop started logging me into a temporary profile, when I log on 2 mine it says preparing windows for a while and then I actually log in and all my setting have been changed and also my files deleted. It says "You can't access your files, and files created in this profile will be deleted when you sign out..and my files have been deleted all of them it shows on the windows 8_OS(C space meter thing. I've tried rebooting and everything but nothing. My admin user account has also been deleted. I've literally tried everything on the internet like even going to the System 32 to select SAM file but it always says the SAM file is in use. My whole life and memories are all on my laptop I have a lenovo G580.
View 1 Replies
View Related
Nov 10, 2013
I got an issue with my logging Windows 8.1 account. When I log in it tells me that my password is incorrect and I should go to windows.live.com/refresh and I did. But when I change my password it tells me the same thing like it haven't even change nothing. I try using my Windows 8 CD that I have and I did an automatic repair and it tells me this.
"Log File E:WINDOWSSystem32LogfileSrtSrtTrail.txt"
At that point I try to change my way of solving this and I went to system restore. I choose the date time I want it to restore my system to see if that fixed anything, but nothing still. I know it has to be with my password or something with my account which is odd, because I never had to link my microsoft account with my PC (if that is the case) But at this point I am again clueless. I even try pressing the F8 when I restart my system to being able to access my computer in a safe mode but it doesn't do a thing.
View 7 Replies
View Related
Sep 15, 2014
I've been encountering random BSOD errors. I uninstalled a few games thinking they could be causing it but the errors have become more frequent since. I followed the instructions on the BSOD posting thread and attached is the information needed.
View 1 Replies
View Related
Apr 2, 2014
I've had 22 crashes since 3/19/2014 according to the event viewer. All of these have had the generic Event ID 41 for an unexpected shut down. They've been occurring daily, and I can almost guarantee that I'll get a crash within 5 minutes of turning on my computer and logging in. Once that first crash occurs, I can use my computer normally until I shut it down and then it'll happen again the next day.
These crashes usually occur within the first few minutes of logging in after a clean shutdown; however, they have also occurred at random intervals afterwards. I am not always doing anything intensive while it happens.
These crashes show no BSOD. The screens turn black and the power restarts, almost as if the power was cut and then started back up. I unfortunately do not have a spare PSU to determine if that's the root cause.
I've installed no new hardware into my computer recently, and no software at the time when this started. The only notable thing is that I setup a new router: TP-LINK TL-WDR3600.
There are no drivers on the TP-LINK webiste: TL-WDR3600 - Welcome to TP-LINK. I've let windows handle that. Yesterday I did install the USB print controller utility (there is currently no printer attached to the router), but I had a crash this morning.
I've checked my Windows folder for any dump files, and there's a memory.dmp from 11/25/13 (unrelated), and no Minidump folder.
I've attached the SF diagnostic zip.
View 3 Replies
View Related
Dec 6, 2013
Differences between using a local vs Live ID/Microsoft account to log into a Windows 8.1 computer?
View 9 Replies
View Related
Sep 19, 2012
I am trying to be able to see CR2 files (RAW photo files from Canon) as thumbnail icons in Windows Explorer. I am using Windows 8.
Microsoft's codec pack (Download: Microsoft Camera Codec Pack - Microsoft Download Center - Download Details) does not work for Windows 8. When I am trying to install it, I get an error message mentioning that I can use Windows 8 Update function, but doesn't give any more information on how to do this exactly.
View 6 Replies
View Related
Jan 14, 2014
I am running a qnap NAS in my home network. I can connect to the NAS no issues at all, I can copy small files across the network no issues. However I want to rebuild my NAS so am performing a backup across the network. I want to copy approx 2tb in a single copy. However when I do a select all, copy and paste, it's only copies about 40gb of the data. I am running Windows 8 ...
View 1 Replies
View Related
Nov 15, 2012
Is there a way to do this easily without disabling uac completely in the registry since that breaks metro apps?
Basically I want to edit files freely in program files and anywhere.
I can't just right click it and hit properties -> security -> users and change them, it's locked
View 9 Replies
View Related
Oct 3, 2013
In Windows 7 if my screen froze up i had no control over mouse or keyboard I pushed control alt and delete was able to go to log in screen,either restart,shutdown or use task manager close a program might be giving me this issue.It seems for me in Windows 8 this does not work anymore,causing me to unplug power on PC which can cause bad sectors to increase on HDD.D How to do this without having to shutdown improperly like i do?
View 8 Replies
View Related
Jun 14, 2014
I'm having random freezes on my Windows 8.1 64bit computer.
I built a custom PC last year and everything is working well until it is around 6-10 months old. Random freezes started occuring. I tried doing reformat but the problem does not go away. Figuring that it may be the problem of Windows 7, I upgraded to windows 8.1 and also added a SSD to use it as a primary drive. 1 week into windows 8.1 and SSD the problem started occuring again, sometimes even when I'm just browsing the internet without viewing videos.
-windows 7+1TB HDD(OS), having a crash
-upgraded to windows 8.1+128GB SSD (OS)+1TB HDD(secondary drive), having a crash
I turned file paging off on my SSD and allocated 8GB of virtual memory to my secondary drive. When the crash happens, no BSOD occurs, my screen just freezes and I'm forced to do a hard reset. When there is sound playing while the crash happens, the sound will keep looping until I did a hard reset.
View 1 Replies
View Related
Jul 31, 2014
I bought a new custom built PC from EveTech around 2 months ago for $1900.00. I installed windows 8.1 on it, and have just been receiving ENDLESS BSODs. At first I found out that Windows 8.1 does have issues with BSOD, so I installed Windows 8, hoping this would have been the solution.
I started doing some investigations on how to read BSODs, and initially I thought it was because of outdated drivers, bad memory etc, because all the posts that I read said that this is MOSTLY the cause of BSODs. I installed every program under the sun to search my drivers, and all stated that everything is updated...
Going further in the investigations, I thought it was because of overclocked CPU and GPU hardware, but even after resetting it back to factory default, I am still having this issue.
The absolute worst part of this, is that the BSODs are never the same - they are constantly throwing a new .sys file stating that "this is the problem".
View 1 Replies
View Related
Oct 30, 2013
so from last three days I am getting random BSODs
dumping dumps here from bluescreen view
Code: ==================================================Dump File : 103013-28984-01.dmpCrash Time : 30-Oct-13 11:36:38 AMBug Check String : DRIVER_IRQL_NOT_LESS_OR_EQUALBug Check Code : 0x000000d1Parameter 1 : 00000000`00000028Parameter 2 [code]....
Program I was running uTorrent, Comodo, BatteryCare, NetWorx.
View 5 Replies
View Related
Aug 20, 2013
A couple months ago I got a new desktop [URL] .....
Love it, works great, did what I needed to do, except blasted windows 8. Classic shell works wonders, but it's still not the same, in particular with troubleshooting issues. Thus is where my issue lies this time (As I have either fixed or found workarounds for other small issues).
Randomly my computer will "have an error occur" and restart. Sometimes it fixes it after once (although not usually) sometimes I have to do a system restore (and today that didn't even work.)
Once when it restarted it went to a black screen and never reloaded the OS today. Finally, randomly, it just worked. What irritates me is that I did a system restore from a few days ago and it didn't fix it, so now I have to redo my settings changes on some programs and such.
A system refresh, both times I tried it (First a few days after I got the desktop, I just assumed it was a bad first install) and once not too long ago) fixes the problem. At least temporarily.
I JUST disabled driver signing (because it annoys me and wouldn't start anyways) and restart after failure (which it still restart a couple times which is even more annoying) and hybrid sleep has been disabled for a while since it has been known to cause problems and I don't use it anyways. I hadn't had the problem since I did that for about a week until a couple days ago so I assumed it fixed it.... but, alas no dice.
View 17 Replies
View Related
Nov 18, 2012
I installed Windows 8 and another monitor on my GeForce GT 240 video card. I have one monitor on a DVI and another monitor on VGA. Every couple of minutes the computer shuts down. It can be anywhere from one minute to one hour or maybe not at all. My power setting or set to NEVER on both monitor and Sleep. I'm wondering if it can be my Video card that is shutting down my computer. I know Video cards, and RAM that can stop a computer cold. Or could it be something in Windows 8.
View 2 Replies
View Related
Oct 15, 2013
I checked ram with hci test and cpu stability with prime95, everything went smoothly and without errors. But i got 2 bsods afterwards when i tried to type url in Firefox.
View 3 Replies
View Related
Oct 5, 2013
I had a windows 7 previously installed upgraded it to windows 8 a couple of months ago. Since then, I'm getting random BSODs with errors including:
DRIVER_POWER_STATE_FAILURE
DPC_WATCHDOG_VIOLATION
REFERENCE_BY_POINTER
IRQL_NOT_LESS_OR_EQUAL
Previously with win7, I had a Windows 8 dually installed. Back then, I used to get the first error only, very frequently, and only in Windows 8. I had ignored them because I had Windows 8 installed only for testing purposes, and I thought they would go away. But now, they just keep popping up, with the reference by pointer error popping up 4 damn times in a row. And may I also add just how slow my PC gets before a BSOD?
I've tried looking them up, but the solutions seem to involve the removal of different drivers. So I thought of just creating a new thread instead. I have a few games installed and I do overclock my pc sometimes, but the recent BSOD (irql) took place when I was watching a video on youtube. I am attaching the SF grab and a bluescreenview report (the 5th error in it is the dpc watchdog violation).
This might be completely irrelevant, but I'll mention it anyway. The previous Windows 8 is still installed. I tried deleting it from msconfig, and was successful, but the files are still there and it seems to be the 'system partition' right now. See my previous thread for more info.
Happened again. Uploading SF grab with bluescreenview report.
Happened a few more times. I'm trying to keep the logs updated. Another thing; my PC now seems to be very slow and sometimes when a crash occurs, all the online accounts I'm logged into (Facebook, Eight Forums, etc.) automatically logout. This was also the case in my earlier Windows 8 installation. And the latest crash appears to be of a different driver.
View 5 Replies
View Related