I can't access my Netgear WNDR3800 Router's configuration access, and I need to change some settings.I went to 192.168.1.1, and tried everything, including "admin" and "password" for username and password, respectively.
View 2 Replies
How do I enable stealth mode on my netgear router? My model is: N300 Wireless Gigabit Router WNR3500l
View 9 Replies View Relatedwithout the likes of logmein?If I enable remote login on my pc, what needs to be done in my router (if anything) so I can remote in from wherever I want? I am running Windows 8.1 pro X64 router is netgear R6300
View 7 Replies View RelatedI am sharing my internet connection with my roommates, but lately they have been using P2P to download stuff which uses almost all the internet speed available. I have set up QoS to limit their bandwidth in the main Asus wifi router which directly connects to the modem, it works great for a few days, but then it doesn't work anymore, I still get slow internet speed now. Since my flat has 2 wifi routers, one is the main and another one is set up with a different name but still connects to the main router via the ethernet cable a few metres away so that the wireless range is increased. Just for your information, the two routers are transmitting on different channel, if you think that might be the cause and they have different SSID.
Could it be possible that the QoS only works in the main wifi router and doesn't affect the other wifi router which my roommates also have access to it?
I have changed the default router password so I am sure that they have no access to the router's settings.
Yesterday I purchased a new Dell Laptop. In the setup and configuration the unit found my wireless network. I have two other PC's (not windows 8) two Kindles, two Cell phones and an IPAD on this router and all the Dell would say it it can't connect to this network. It won't ask for the passkey, it provides no additional information and I can't get online in my own network with this system. I can however log on to a neighbors unsecured network effortlessly.
I am using an old airlink 101 wireless router that has been trouble free for several years. I tried to log onto airlink for a support inquiry but they no longer provide support for this model.
I was using a router to access the web with my smart phone. I no longer use a smartphone and have gone back to a home phone.
The router is still hooked up and I was wondering, is the computer utilizing it in any way? Should I leave it hooked up?
I have broadband from virgin media with one of their superhubs made by netgear, I have a CCTV DVR plugged into this using a regular cat5 cable, the DVR will allow you to view 4 cctv cameras via the internet,
Android and blackberry phones can both connect to the router using wifi, an IBM laptop running XP also has no problems, the only thing that does have a problem is a new Toshiba laptop running windows 8,
If the DVR is plugged into router before win 8 connects then the Windows 8 machine cannot log on using wifi, it gives message saying restricted access and has no internet access, if you unplug the DVR Windows 8 machine logs on fine you can then plug DVR back in and laptop can browse all day with no problems, if you log off then try and log on again you get the same restricted access message again ...
Since I changed the security parameters to my Linksys Wireless Router so my grandson could log in while visiting me on his laptop. I can't seem to be able to access my other computer on my home network. Enclosed is an "ipconfig/all" screenshot. I need to access my printer on my other printer which I was able to do prior to playing around with my router. All the diagnostics say more or less the same thing. They can "see" the computer but it isn't responding...
View 4 Replies View RelatedIs there a known issue for Dell Latitude 10 not being able to connect successfully to a Netgear PTV3000? I tested it after the Windows 8.1 update but the WPS PIN entry is the farthest that I could get. It won't show up at all in the Windows 8.1 devices or Project/Display option. My android phone can connect to the PTV3000 flawlessly.
View 7 Replies View RelatedI'm trying to set up a router, but the setup keeps telling me that my Ethernet adapter is not working. The Ethernet adapter troubleshooting tells me that the computer is configured correctly but the DNS server is not responding. (During this time the Internet is working as I have the cable plugged in to the computer.) I have the adapter set to automatically find the DNS server. I have run ipconfig/flushdns and ipconfig /registerdns to no avail. Do I need to get another network adapter? My laptop is probably at least 6 years old, and this problem started after I upgraded to 8 from XP - I had the router set up just fine on the old version.
View 10 Replies View RelatedIn my Netgear router logs, its showing '[DoS attack: STORM] attack packets in last 20 sec from ip [10.0.0.2], Monday, Jan 06,2014 00:50:55' many times over and over about every 20 seconds, which is coming from my computer, I am almost 100% positive I got no malware/viruses on my computer.
View 2 Replies View RelatedI have a netgeat WNDR4500, I also have readyshare cloud installed on my home pc (HP pavilion elite x64 Win 8 pro) I also have it on my work pc (windows 7 pro Lenovo). I cannot seem to access my shared folder when logging in to ready share, it shows my device, but never pulls the shared folder. Is there something in the port forwarding setting that I may need to change?
View 7 Replies View RelatedSo i always when i try to go to my router settings or test my speed i always notice that my ip is changing every day.
View 7 Replies View Relatedi would like my computer to give internet to my old router. Is it possible? i have windows 8.1
Computer Ethernet cable
connected -----------------------------------------> Old Router
to WiFi
I am using windows 8 laptop. When i tried to log in to Beetel Router admin page(192.168.1.1), i was not able to log in. I used "admin" as username and " password" as the password. But the page is not getting loaded. Its asking for the username and password again. My friend is able to log in to the same page with the same credentials in his windows 7 laptop. So i guess its the problem of OS.
View 3 Replies View RelatedI have to reconnect my Win 8.1 computer each time it's started,my Win 7 computers do not have this problem. Also my Canon G16 WiFi camera can connect to all my Win 7 systems but not to my Windows 8.1 the camera is not found. Windows 8.1 has been a real bummer. Just glad I still have other computers running Win7.
View 1 Replies View RelatedSince upgrading to 8.1 , if I try and access my routers web page to change some config settings , the browser (and I've tried 4 different ones) connects to the web interface REALLY REALLY slowly... we're talking 5-10 minutes just to show part of the menu UI and even then not all the graphics show.
I can connect to the same interface using my tablet and it's instant...
Under Windows 8.0 it worked just fine also...
General web browsing is fine as is internet access for gaming etc...
my tp link wireless router problem. The problem is related to windows 8 apps.
View 9 Replies View RelatedI have a linksys WRT54G router connected to a beetel 110TC2 modem. I want to get a static ip address for port forwarding. How to get a static ip and how to do port forwarding?
View 5 Replies View RelatedI'm trying to set up my router to the new internet connection and get the wifi going but for the life of me I cant get it set up. The internet connection itself is fine, from modem to pc. Once I have the modem in the mix,it gets no/limited connectivity and cannot reach the setups. I have tried the classic 192.168.2.1 and 192.168.1.1 and about 5 other variations, along with 'http://router'. My router is a Belkin N300 Wireless N Router. If I use a command prompt and do 'ipconfig', there is no ip address beside 'gateway default' once the router is connected. I have reset my router to factory settings. I've tried using a static ip address for my computer [though not sure if i did it correctly]. My DHCP is enabled.
View 6 Replies View RelatedI have my private wireless router setup so that when I select it the password is provided automatically.
How do I force the system to ask for the password each time I connect?
My computer keeps listing the internet connection as "limited". It does this randomly, I don't know when it will happen next. Restarting router/computer fixes it sometimes, but not all the time. Sometimes it takes about 4 restarts of the router until I get a proper connection. Trouble shooting merely describes the problem as having no connection and tells me to reconnect the router. This takes around 5 minutes each time and I'm getting tired of doing this, as it interrupts skype calls, games and conversations.
View 2 Replies View RelatedI bought an Asus G75vw couple days back with windows 8. Everything was working fine except that i couldn't connect to my wireless router. It had a WEP encryption. After I entered the Network Security key, I Kept on getting "Can't connect to this network", troubleshooting didn't work either. Then I updated all drivers from Asus support website and it connected after a restart. I was quite delighted but the next day again i got the "cant connect to this network" message. So I changed my encryption to WPA2-PSK (AES) and even updated the firmware of my router. Still no luck.
View 9 Replies View RelatedI presently have a ethernet system to my computer. Getting a laptop that has a wireless adapter. Can I just add a wireless router to the ethernet instead of my new laptop?
View 3 Replies View RelatedI am trying to change the ip address manually. to unbrick my router. so I go to my network and click properties to change the tcp ect. and the famous Unexpected error accured pops up. I try all the regsvr32 ect. stuff and nothing works. I have windows 8 pro.
View 4 Replies View RelatedI use a small usb modem for my internet access and using a usb wifi adaptor and a virtual wifi router I was able to share my internet around home quite affordably.
Every now and again the software 'virtualrouter' would cause a crash. Maybe once every 3 months.
When I updated to 8.1 the software no longer worked, nor did any other. What's more it cause a DPC-Watchdog violation within a few minutes.
When I say the software doesn't run, one of two things happen. My old program 'virtualrouter' runs as normal, but none of my devices can connect. The network is available, but connection is impossible.
With other programs I get told that the wifi adaptor is not enabled. Which it is.
Something has changed in the upgrade and I don't know what. Every option and test I've run and enabling of virtualisation says that it should work. But then the BSOD arrives.
I recently brought the netgear wireless router and i connect it to the my wired network and after i complete successfully about the settings of netgear and after that i check the internet speed at speedtest it shows almost 2mbps download speed and 1.5 mbps upload speed but when i put the a file to download the speed only changes in between 60 - 70 kbps actually it gives 200 to 250 kbps but it doesn't.....i really tired my best get normal speed but i didn't got that....
View 1 Replies View RelatedI play games on my computer and i have Windows 8 which came with the computer and it works fine. But when I play games online it will work for a while then it will drop me out of the game. And when i look at the bottom of taskbar it has the little disconnected symbol.
I am using the computer built in "802.11n Wireless LAN Card". After a few seconds it will reconnect.
I have an Acer Aspire E1-572 laptop. Went to connect it to my router via an Ethernet cable but failed to have connection,It works okay on wifi but not on the Ethernet the square box don't show next to the clock.I have looked in device manager for any yellow exlamation marks and none to be seen.
View 3 Replies View RelatedI have a wireless router and am connecting 2 phones (wifi) and 1 PC (ethernet). The PC is running Windows 8 and has two User Accounts (I'll call them "Business" and "Personal").
Since setting up the router, the phones have connected over wifi without problem. If I log onto the "Personal" user account on my PC, it connects over ethernet, and the phones still work with wifi.
However, if I log my PC onto my "Business" user account, the PC says it has connected to the Home Hub via the ethernet cable, but there is no internet connection. It also causes the internet connection on the phones to drop (sometimes the wifi goes down completely, sometimes it says it's connected to wifi, but there is no internet). I don't think it's an ethernet problem either, as I connected my PC wirelessly instead of with the cable, and the same thing happens.
The PC only ever does this on the "Business" user account, the "Personal" account works fine (I'm using that now). Looked everywhere to find a solution, I assume it's something in the settings, rather than a router issue. Can't find the answer anywhere.
Two days ago my ISP replaced my modem-router for a new one. Ever since the replacement, my main desktop computer won't connect to the internet "immediately". I checked the connection via ethernet and WiFi with my other computers (even tested every single one of my ethernet cables) and they work perfectly fine, except for my main desktop computer.
What my desktop does:
When I turn it on I have to wait for around an hour before it connects to the internet. During that hour, it attempts to identify something (I guess the IP? - the yellow warning icon gets displayed) and after 3 seconds of attempting, the connection drops and it goes back to saying "No connection". The connection is being made via Ethernet cable and I tried the troubleshoot but it continues to say that I need to plug-in a ethernet cable to my computer, thing is it is already plugged in and like I stated above, the cable worked fine with all my other computers. My desktop used to work perfectly fine with my old modem-router.
I attempted to do do some troubleshooting refreshing my ip using the cmd with admin privileges but nothing worked as it said every time that there was no media connection. My desktop just randomly connects to the internet by itself after an hour of attempting to connect and disconnecting and once it gets connected it works perfectly fine until I restart my computer or turn it off and then the next day it'll be the same thing over again.
This has gotten extremely annoying, what can I do to fix this and further prevent it from happening? - I updated all my drivers and it's still the same. It'll just connect to the internet whenever it wants to.
