without the likes of logmein?If I enable remote login on my pc, what needs to be done in my router (if anything) so I can remote in from wherever I want? I am running Windows 8.1 pro X64 router is netgear R6300
I am using the N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700v2 This has 2 channels 2.5ghz and 5ghz .
On my main desktop windows 8 has sucessfully found and connected wirelessly to the 2.5ghz connection. However, when I want to do video streaming the 5ghz connection would be better.
On my other devices I can search / scan for all available connections and I can see both the 2.5 and the 5 connections. For example, my laptop running windows 7 can see both connection and I can choose which one i want to connect too.
However, Windows 8 seems to have locked into the 2.5ghz connection and cannot see the 5ghz connection . Is there a way to force Windows 8 to scan again so it can see the 5ghz connection ?
I bought an Asus G75vw couple days back with windows 8. Everything was working fine except that i couldn't connect to my wireless router. It had a WEP encryption. After I entered the Network Security key, I Kept on getting "Can't connect to this network", troubleshooting didn't work either. Then I updated all drivers from Asus support website and it connected after a restart. I was quite delighted but the next day again i got the "cant connect to this network" message. So I changed my encryption to WPA2-PSK (AES) and even updated the firmware of my router. Still no luck.
I recently brought the netgear wireless router and i connect it to the my wired network and after i complete successfully about the settings of netgear and after that i check the internet speed at speedtest it shows almost 2mbps download speed and 1.5 mbps upload speed but when i put the a file to download the speed only changes in between 60 - 70 kbps actually it gives 200 to 250 kbps but it doesn't.....i really tired my best get normal speed but i didn't got that....
I can't access my Netgear WNDR3800 Router's configuration access, and I need to change some settings.I went to 192.168.1.1, and tried everything, including "admin" and "password" for username and password, respectively.
Since a few weeks, I have a problem with my laptop running Windows 8.1 (Toshiba Satellite P50-A-12PBE). Sometimes, after bringing Windows back from sleep mode, I seem to have no connection to the internet. Windows says the connection is 'limited', wether I'm connected with a wire or wireless. Resetting the router doesn't solve anything, but rebooting my pc does. Since both the wired and wireless network are always simultaneously affected, I think this hasn't anything to do with drivers (I already have the latest versions by the way). I have made screenshots with ipconfig-results when I'm connected with a wire.
I tried wired and wifi same exact speed, as if its capped?
I know a far bit about networks set my own up using servers and stuff in my basement and even tried a store bought router in case it was somehow my ddwrt router which it wasn't.
I have a new laptop ASUS ROG 17" G series its running 8.1
The source server has 6 147gb 15,000rpm sas drives in a raid dual gigabit network cables running esxi and ubuntu server with dual gigabit network cables, extremely fast speeds.
Everything is up to date on the laptop as far as I can tell I updated all drivers the gigabit network is using a Qualcomm Atheros driver from 7-16-2013 version 220.127.116.11 signed by MS its not a "genetic driver" or whatever sometimes shows up under device manager.
I have another normal desktop running 8.1 as well and it has no problems with network transfer speeds they exceed the drives capability to write to in the target drive from the server raid as does pretty much everything else I have, the server can serve files faster than anything can take them.
But the laptop seems to be capped at exactly 10MB/s according to teracopy (windows explorer transfer shows 11.8MB/s but I suspect its wrong its probably 10 thats what my router clams its going at not 11.8) and the graph is a steady line as if its capped like that.
I can transfer from an external usb 2.0 drive faster than this network? - I have tried wired and wifi the speed is the exact same.
The computer turn off the wireless connections and defaults into airplane mode. I had this problem with Windows 8. The option to easily toggle airplane mode on and off become grayed out unchangeable. The only way I found to temporarily fix the problem was to rightclick the airplane icon and then troubleshoot the wireless connections which would then turn wireless back on. I had the option to upgrade to 8.1 and I did and it fixed the problem for a while. It did happen again which is why I'm back on the web searching for possible more permanent solution for this. Luckily it only happened once a week ago and hasn't happened again. I was wondering if this bug was known about and if you possibly know of a way to fix.
I have a lenovo G505 laptop - it will no longer connect to my BT home hub despite it showing as being available. I suspect it might be to do with the fact that it is has a passkey - I entered it yesterday when prompted and it connected fine, but now I'm not being given the option of entering the key.
I've also tried connected using the BT wifi (as opposed to homehub) but once again it will not connect me. I've been through all the troubleshooting options, and searched under every term I can think of, but nothing is working.
When I click network while i am in windows explorer, the network infrastructure is not there, only the Computer is visible there and i want to fix something by changing the properties of my modem/router on the network infrastructure.
Since I changed the security parameters to my Linksys Wireless Router so my grandson could log in while visiting me on his laptop. I can't seem to be able to access my other computer on my home network. Enclosed is an "ipconfig/all" screenshot. I need to access my printer on my other printer which I was able to do prior to playing around with my router. All the diagnostics say more or less the same thing. They can "see" the computer but it isn't responding...
Wifi worked, walked away for 10 minutes, then found that it didn't. I would normally just reset the router, but I live in an apartment building and the router is in my landlords office.
When I did ipconfig /all, my ip started with 169, which I know isn't normal. But when I try to do a /release and /renew, I get the error "No operation can be performed on local area connection *14 while it has it's media disconnected." I am unable to attempt a wired connection, as the router is not accessible to me.
.I'm not sure if this is a router issue, or an issue with my laptop (less than a year old.) I am a grad student and I currently have to do most of my work via my iphone, which is getting very inconvenient.
I am sharing my internet connection with my roommates, but lately they have been using P2P to download stuff which uses almost all the internet speed available. I have set up QoS to limit their bandwidth in the main Asus wifi router which directly connects to the modem, it works great for a few days, but then it doesn't work anymore, I still get slow internet speed now. Since my flat has 2 wifi routers, one is the main and another one is set up with a different name but still connects to the main router via the ethernet cable a few metres away so that the wireless range is increased. Just for your information, the two routers are transmitting on different channel, if you think that might be the cause and they have different SSID.
Could it be possible that the QoS only works in the main wifi router and doesn't affect the other wifi router which my roommates also have access to it?
I have changed the default router password so I am sure that they have no access to the router's settings.
Yesterday I purchased a new Dell Laptop. In the setup and configuration the unit found my wireless network. I have two other PC's (not windows 8) two Kindles, two Cell phones and an IPAD on this router and all the Dell would say it it can't connect to this network. It won't ask for the passkey, it provides no additional information and I can't get online in my own network with this system. I can however log on to a neighbors unsecured network effortlessly.
I am using an old airlink 101 wireless router that has been trouble free for several years. I tried to log onto airlink for a support inquiry but they no longer provide support for this model.
I have a netgeat WNDR4500, I also have readyshare cloud installed on my home pc (HP pavilion elite x64 Win 8 pro) I also have it on my work pc (windows 7 pro Lenovo). I cannot seem to access my shared folder when logging in to ready share, it shows my device, but never pulls the shared folder. Is there something in the port forwarding setting that I may need to change?
I am using windows 8 laptop. When i tried to log in to Beetel Router admin page(192.168.1.1), i was not able to log in. I used "admin" as username and " password" as the password. But the page is not getting loaded. Its asking for the username and password again. My friend is able to log in to the same page with the same credentials in his windows 7 laptop. So i guess its the problem of OS.
I have to reconnect my Win 8.1 computer each time it's started,my Win 7 computers do not have this problem. Also my Canon G16 WiFi camera can connect to all my Win 7 systems but not to my Windows 8.1 the camera is not found. Windows 8.1 has been a real bummer. Just glad I still have other computers running Win7.
Since upgrading to 8.1 , if I try and access my routers web page to change some config settings , the browser (and I've tried 4 different ones) connects to the web interface REALLY REALLY slowly... we're talking 5-10 minutes just to show part of the menu UI and even then not all the graphics show.
I can connect to the same interface using my tablet and it's instant...
Under Windows 8.0 it worked just fine also...
General web browsing is fine as is internet access for gaming etc...
I'm trying to set up my router to the new internet connection and get the wifi going but for the life of me I cant get it set up. The internet connection itself is fine, from modem to pc. Once I have the modem in the mix,it gets no/limited connectivity and cannot reach the setups. I have tried the classic 192.168.2.1 and 192.168.1.1 and about 5 other variations, along with 'http://router'. My router is a Belkin N300 Wireless N Router. If I use a command prompt and do 'ipconfig', there is no ip address beside 'gateway default' once the router is connected. I have reset my router to factory settings. I've tried using a static ip address for my computer [though not sure if i did it correctly]. My DHCP is enabled.
My computer keeps listing the internet connection as "limited". It does this randomly, I don't know when it will happen next. Restarting router/computer fixes it sometimes, but not all the time. Sometimes it takes about 4 restarts of the router until I get a proper connection. Trouble shooting merely describes the problem as having no connection and tells me to reconnect the router. This takes around 5 minutes each time and I'm getting tired of doing this, as it interrupts skype calls, games and conversations.
I have broadband from virgin media with one of their superhubs made by netgear, I have a CCTV DVR plugged into this using a regular cat5 cable, the DVR will allow you to view 4 cctv cameras via the internet,
Android and blackberry phones can both connect to the router using wifi, an IBM laptop running XP also has no problems, the only thing that does have a problem is a new Toshiba laptop running windows 8,
If the DVR is plugged into router before win 8 connects then the Windows 8 machine cannot log on using wifi, it gives message saying restricted access and has no internet access, if you unplug the DVR Windows 8 machine logs on fine you can then plug DVR back in and laptop can browse all day with no problems, if you log off then try and log on again you get the same restricted access message again ...
I am trying to change the ip address manually. to unbrick my router. so I go to my network and click properties to change the tcp ect. and the famous Unexpected error accured pops up. I try all the regsvr32 ect. stuff and nothing works. I have windows 8 pro.
I use a small usb modem for my internet access and using a usb wifi adaptor and a virtual wifi router I was able to share my internet around home quite affordably.
Every now and again the software 'virtualrouter' would cause a crash. Maybe once every 3 months.
When I updated to 8.1 the software no longer worked, nor did any other. What's more it cause a DPC-Watchdog violation within a few minutes.
When I say the software doesn't run, one of two things happen. My old program 'virtualrouter' runs as normal, but none of my devices can connect. The network is available, but connection is impossible.
With other programs I get told that the wifi adaptor is not enabled. Which it is.
Something has changed in the upgrade and I don't know what. Every option and test I've run and enabling of virtualisation says that it should work. But then the BSOD arrives.
I play games on my computer and i have Windows 8 which came with the computer and it works fine. But when I play games online it will work for a while then it will drop me out of the game. And when i look at the bottom of taskbar it has the little disconnected symbol.
I am using the computer built in "802.11n Wireless LAN Card". After a few seconds it will reconnect.