Maintenance :: Sfc /scannow Stops Always At 52%?
Apr 4, 2013
When i run the sfc /scannow command, it always stops at 52% and gives an error that some system files are corrupted but can not repaired.
Some extracts of the log:
2013-04-04 12:45:13, Error CSI 000003be@2013/4/4:10:45:13.220 (F) basewcpsilmerged
tu
tsystem.cpp(2155): Error STATUS_OBJECT_NAME_NOT_FOUND originated in function Windows::Rtl::SystemImplementation:irectFileSystemProvider::SysCreateFile expression: (null)
[gle=0x80004005]
So i think it as to do with partitions? But why the scan always stops at 52%.
View 1 Replies
ADVERTISEMENT
Jul 3, 2013
I just used sfc scannow and it said that some files were unabled to be fixed.
I have attached the logs.
Right now I can't open any metro tiles, so
View 3 Replies
View Related
Jun 15, 2013
bcdedit /set increaseuserva 2500.
Tried this command because of Fallen Samurai Shogun 2 not working onmy windows 8 x64 enterprise. Says command not recognised.
So I tried. SFC /Scannow
Said the windows resource protection could not start the repair service.
So I checked services: Windows module installer. It was set to manual already. It was not running though. I pressed Run. And tried again SFC/scannow.
View 7 Replies
View Related
Aug 5, 2014
I have done sfc/ scannow a few time and cannot fix the corrupted files. I was wondering what can I do to fix all these problem?
Here are the CBS file. Been looking at a few thread and it seems that uploading this file will be useful.
Code: CBS.txt
View 9 Replies
View Related
Apr 9, 2014
When I run SFC, I get "Windows Resources did not find any integrity violations", however when I run DISM, I get the message "The component store is repairable" and "Could not locate source file" messages. This seems to be inconsistent - is there something I should do, or is it normal? Just trying to understand the results when I run these.
View 6 Replies
View Related
Apr 15, 2014
I've been trying several things throughout the day and I have had no success in fixing the corrupted files. I have ran "sfc /scannow" several times (even in safe mode). I have also ran "Dism /Online /Cleanup-Image /RestoreHealth" before and after "sfc /scannow" to no avail.
I am running Windows 8.1, I tried booting from my Windows 8 Pro DVD but whenever I tried to run "sfc /scannow /offbootdir=c: /offwindir=d:windows" I would get an error: Windows Resource Protection could not start the Repair service". How I can fix this without doing a clean install or refresh?
CBS.log (txt file)
View 9 Replies
View Related
Mar 17, 2014
During sfc /scannow it gave me a error about a corrupt file, heres the CBS.log:
CBS
View 9 Replies
View Related
Oct 29, 2012
I really like windows 8, but im most likely going back to windows 7 because of all the problems im haveing with windows 8, being lag and random freezeing.
So i was on youtube, trying to watch a video and it froze, and my laptop charger being a replacement, it slips out a lot, when it came out the video started working fine again, after that, i have noticed my computer stops lagging when my laptop isnt plugged in. as soon as i plug my laptop in, 5-10 seconds later i freeze,not matter what im on, youtube or just my desktop, it happens.
Dell inspiron 1521 3gb ram 120GB hd if you need any more additional info let me know..
View 1 Replies
View Related
Feb 5, 2013
I have a Acer Laptop with windows 8 64 bit and have had Usb issues with some devices. I tried running SFC and it stops at the same place each time saying it cant continue. The log file list files that have been verified but no errors ...
View 9 Replies
View Related
Feb 6, 2013
The time is not shown correctly in my task bar, this happened for second time, when it happened a month ago, I just changed the time.
When I re-booted it shows the correct time.
View 6 Replies
View Related
Mar 29, 2014
I followed the tutorial on this site for scannow. When completed (no errors), I typed exit at the command prompt. I have only a blank screen with functioning mouse pointer. When restarting I get the hp logo, then the windows "please wait" icon for about one second then it goes black. I originally cloned windows from my sea gate 1Tb hhd to the toshiba ssd. I can boot from the hhd with no issues. Just won't boot from ssd. I would run the recovery disc but it claims I need 140 Gb to do so and I only have 128Gb.
View 2 Replies
View Related
Feb 17, 2013
Okay i already tried running sfc/scannow but live tries are not working, they are working only on the mail, the all used to work, the weather and news but now live tiles are not working?
View 5 Replies
View Related
Aug 26, 2014
Big problem with my laptop. Due to the fact that it is a compaq610 notebook pc and I have upgraded him to win 8 pro the machine was going very slowly. so i bought 2x 2GB DDR2 PC2 6400 sodimm ram. When I put in 1x 2GB there is no problems except its still to slow.
HP says that there can be a upgrade till 4 GB 2x2GB, so i bought that and when i installed it the win 8 start up hangs when the Windows 8-loge appears and than the dotted circle stops and everything freezes!
When I go into the bios, I can check the memory so check of 4 GB of memory goes well until 24% than the graphics does strange blocked screen n different colors. Strange that each mem of 2GB single placed works fine. How to get the 4GB working on my laptop?
View 9 Replies
View Related
Aug 21, 2014
An hour ago my keyboard quit working so i restarted my computer. When i came back, i could login with a password but once i logged in my keyboard stopped work.
View 9 Replies
View Related
Nov 8, 2012
My question is about IE, Google Chrome and other browsers. The sounds and musics playing on the browsers I have installed, stops every time I switch to another application. For example: If I open a music video on youtube and switch to the e-mail app, the video continue playing but the sound and music stops. I wonder if any of you have already noticed that and if you know if it's possible to fix this issue (for me this is a problem since I like to play some videos and do other stuff while I listen to what is playing).
View 3 Replies
View Related
Feb 17, 2014
i come across a little issue with windows 8, skype stops responding then once skype stops responding everything else just laggs with it, but by the time i get windows taskmanager open to close other apps it just responds normally. is there a way i can speed up windows 8? i stopped about 14 apps from startup that i thought was the problem then my computer just came up with the same not responding thing for windows 8 skype desktop application not background application, is it because i have a third party app for microsoft ? or should i swich back to the default skype? i don't like the default skype but if i have to use it i will. if there is any tweaks to make windows 8 apps always respond quicker
View 5 Replies
View Related
Dec 25, 2012
Just received this for Christmas and turned it on. It will show the Alienware logo and F8/F12 prompts. After that the screen goes blank. Start it up again, goes thru logo screen and then a blue screen pops up saying that your pc couldn't start. It comes up with different options like safe modes and disabling options. Choosing any of these options just shuts down the pc. Its an X51 running or attempting to run windows 8.
View 1 Replies
View Related
Feb 13, 2014
I have WIN 8.1 installed on a Gateway DX 4822IE 10 and now IE 11 continually stop working,can find no fix on MS web site...
View 1 Replies
View Related
Oct 11, 2013
I have 4 computer with none working keyboard after updates. This AM, I put an HP on line after being off line for several weeks (totally removed from home network).
Under BIOS control keyboard works. Enter password and Windows 8.0 takes over. Worked well until I ran update which had 88 updates. Upon restart , keyboard will not work. (Windows 8.0 was installed over Windows w/ all updates)
HP P7-1010 AMD processor 16 gig ram. 450 gig drive
View 6 Replies
View Related
Feb 3, 2013
After upgrading to Windows 8, the I.E. went to hiding, so I retrieved and pin it to task bar. Now, after I open it, it closes right away when I try to go onto a bookmark. The error message says "Internet explorer has stopped working" A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available".
View 1 Replies
View Related
Apr 15, 2014
I was recording with my internal realtalk hd mic on my laptop, but it stops working everytime I plug in my head set. There's nothing special about this headset, and there's no microphone on it. Sadly, my RT mic does this with any headset I use. It's frustrating when I unplug my headset and the mic begins to work fine again. Is there any reason why it might be doing this? Whenever I try to configure the mic, it simply just doesn't recognize any noise being made when the headphoes are plugged in.
View 1 Replies
View Related
Sep 8, 2013
How can I return it ?
View 2 Replies
View Related
Aug 21, 2013
Annoying error of windows explorer. Windows explorer is getting crashed while opening any folders accidentally, especially folders with large number of files and images. first it appears as windows explorer is unable to load files thumbnails (any kind of files) and appears as white or blank icons regardless the type of file. then when opening my computer in another window , it couldn't load even contents of drivers and hangs as "searching for items".
All this happens suddenly after weeks of normal windows usage. I resolve it by backing up system using Acronis image. but the problem persists. I tried virus scan with no success using AVG. I made thorough scan for C with no result too.
Note that this problem I found with Windows 7 and it forced me to upgrade to Windows 8 then I'm experiencing the same problem now. I don't Understand why.
Note: I think there's no hardware (HDD) error cause I'm running Ubuntu 13.04 alongside Windows and it's browsing files perfectly.
View 6 Replies
View Related
Jul 13, 2014
For the past few days my laptop, a Windows 8 Samsung model with Intel core i5, has been acting up for the first time since I purchased it last year. I've been away on vacation for three weeks, and have not used it during that period, so when I returned the system naturally installed itself with new updates. But ever since then, my audio driver has not worked whenever I initially booted the computer (i.e. there is no sound); interestingly, YouTube videos also refuse to load. It is only when I restart the computer, or disable then enable the driver manually, that things return to normal. Or, at least, somewhat.
For when I try to shutdown the system, the computer hangs and just doesn't shutdown. It seemingly performs the processes required for it, the screen darkens, but the system does not power off. The first time I had to manually turn off the power, but last night I simply let it continue with the hope that it would shutdown eventually. It did... but only because my laptop battery ran out.
Before System Restore recommended, I tried that route already. No matter which restore point I used, the system told me that each restore was unsuccessful due to the possibility that my C drive was corrupt. I don't know if that's the case - certainly something is wrong - but I'm at a loss as to exactly what to do.
View 2 Replies
View Related
Aug 11, 2014
Recently the sound on my Sony Vaio will play initially, but afterwards won't work. It doesn't say it's muted and the little green part that shows sound in the speaker area also doesn't appear when something is playing. I have tried to test the speakers to see if that plays sound but when I do it says that they are being used with another application and to close it before I try to test them, even when nothing else is open. If I restart it, the same thing will happen again. Why is this happening?
View 3 Replies
View Related
Sep 15, 2014
All of a sudden many of my programs either won't launch or stops working right after launch.
I have no "reset" point that can fix this, and I have tried "sfc /scannow" (without having a clue what it does). After the sfc /scannow, the command prompt message said I had some corrupt files, and not all of them could be fixed automatically.
What can cause several programs to stop working all of a sudden, and what can possibly fix it?(Without re-installing Win 8 of course)
View 7 Replies
View Related
Aug 10, 2014
I installed Windows 8 with UEFI on a GPT SSD like the tutorial on this very forum states, but I ran into an issue when I plugged in my secondary HDD (1tb MBR?). It won't boot even if I make sure Windows Boot Manager is the primary boot option. What can I do about this?
If I unplug the drive, it boots fine. If I plug it back in, it stops and Windows tries to repair itself.
Apparently if you're using Win 8 with UEFI, you can't have a 2nd drive that uses extended or logical partition. Since I had Ubuntu on the 2nd drive (logical) it wouldn't boot. I haven't done it yet, but If I delete the partition it should work just fine. I created a bootable usb with Gparted and will fix it later.
View 4 Replies
View Related
Aug 2, 2014
After I remove the off-board VGA card from the rig it's not booting anymore. It doesn't even beep when I turn it on with no memory module. I tried to reset BIOS but still no go!
View 3 Replies
View Related
Oct 22, 2013
I am trying to upgrade to Windows 8.1 from Windows 8 PRO. Though, every time I try to install it, it reaches around 82% and then it stops to give an error code. 0x8007004 I think...
Anyway, I've done some researching and apparently the update does not work unless the user directory is not in its default location.
It's true for my setup. I run both an SSD and HDD, and I moved the user directory to the HDD using a Symbolic Link. That way to trick the system that it still is at C: Drive, but is actually writing the data at D: Drive.
Anyway, what are the steps I can take so that I can install Windows 8.1? There are a few features I want to use that are in that update, but this has prevented me from doing so for a while now. I would prefer to keep it setup this way because I don't want to harm my SSD and keep it in tip top shape.
View 4 Replies
View Related
Jul 30, 2014
IE11 seems to have a strange "Feature". When you close a Web site with an active download the whole thing closes and the download disappears -- IE 11 shows no windows open.
However press CTRL+J and you'll see the download lists again. If there's no activity press PAUSE and then press RESUME and then it should continue from where it stopped.
To some this might seem obvious but I've seen people re-start a 2hr download because they thought they had lost their currently active download when they accidentally closed the web site.
View 9 Replies
View Related
Aug 16, 2014
I have been having an issue recently with my Windows 8 HP laptop where it'll just stop playing videos (whether if streamed through the internet such as you tube or if played on the actual computer as a downloaded video) or the sound for said videos just won't play. The problem can usually be temporarily fixed by restarting my computer but it gets annoying to restart my computer constantly because a video is not playing or the sound is not working so I am trying to see if there is a permanent solution. Adobe flash player is up to date and the problem has been occurring before and after I updated flash player.
View 1 Replies
View Related
