Hardware Drivers :: Function Keys Work Fine Except For The Brightness Keys?
Dec 21, 2012
Recently did a clean install of windows 8 on my Asus K53SV and the function keys work fine except for the brightness keys.Actually, at first i loaded the windows 7 atk package and the brightness keys worked but the volume ones didn't then i got the latest atk package and now the brightness ones don't work (the lower brightness one just dims my monitor a bit and the increase brightness just makes it brighter a bit but doesn't change the brightness value) and the volume ones do.
I just switched from Mac OS to Windows 8, and one of my biggest problems have been the function keys (F1-F12). On a mac, you could have the OS features "hidden" behind Fn, which enabled me to use function keys as shortcuts when using a software or playing. With Windows 8, the OS function keys commands go above a software's shortcut commands. So you can't press F5 for refresh and so forth.
After a lot of googling, it seemed it's impossible to switch Windows 8's features such as second screen (f10) off, or have them behind a Fn+F10 type commands.
I've tried already to achieve this with autohotkey but even with administrative rights etc, Windows 8 won't let me bypass or override the OS function keys features.
This is actually the main reason in considering to sell my brand new Lenovo laptop (which I like) and switch back to Apple.
I have a Toshiba Satellite P75-A7200 with windows 8, and none of the function keys are working, although they used to work. Windows 8 does not have flash cards, nor is there a keyboard option on computer settings.
I want to disable my function key abilities completely so games or other apps can use them normally. Windows seem to take over these functions with the stuff like brightness, sound, turn airplane mode on/off.. what i need is a registry hack or something to to fix this. There is a app in control panel that allows you to access some, not all of these functions.. Windows Mobility Center - but still you cannot turn them off at all. I do not need or want any of these features on my function keys.
These are shortcut keys manufactures started putting on keyboards a few years back.. They used to be called Multimedia keyboards - these functions were never standard for a keyboard. I feel like MS has some nerve taking over my function keys like this in a way where i cannot easily turn these off.
have a Registry hacks section. I used to use another forum - forgot it's name for use with XP.
IS there any tool, which will enable me to controll the brightness with some re-assigned short keys ?? I have a Sony Vaio Laptop but the thing is that the utility for my laptop which is responsible for Brightness control is not comparable with Windows 8, so I am searching for some tool/software which will control my screen brightness.
Recently I turned on my computer (Acer Aspire V5 122-P) and went to change the brightness. And using the FN keys and changing the brightness returns the same value rather than changing it. The other FN keys such as Volume +/- and turning adapters on and off still work. It is just the brightness keys. I would like a fix as I need long battery life and this is causing excessive battery drain. (I have tried turning it off and on again to no avail)...
I bought Dell 5521 2weeks ago (8gb ram 1tb hdd i5 1.70ghz). Whatever, now, i can't use my FN+F4/F5 keys. I can't control/change my screen brightness. Other Fn keys are normal. I can use them but just i can't use my brightness. What should i do? A person said me that "download the Fn key's driver" but i don't know which driver is.
Anyways I've been having trouble since I got this laptop and basically my f1, f2 keys are like for screen brightness etc however if I press the FN key then it works how I want it to. How I can disable the FN function key to work opposite? also how do I set hot keys?
In any case, as the topic title says, some keys on my laptop occasionally stop working for some time, before returning back to normal. Sometimes simply pressing the key several times makes it work, sometimes holding it pressed for ten seconds or so works... Sometimes neither of these works. Occasionally, the key starts working it I press it in rapid succession with a key that does work. For example, pressing I, a non-working key, instantly after pressing J, which works perfectly. Sometimes I simply just randomly press keys on my keyboard until the non-working keys start working again. Backspacing seems to make it easier for them to go back to 'non-working state', although this may be just my imagination.
When any one of the keys that sometimes stop working stops working, none of those keys works. And when one starts working again, all of them start working. Although they may return back to non-working state right away. Although it might be just coincidence, and it doesn't actually work that way.
An incomplete list of the keys that occasionally stop working: (Left) Ctrl, I, O, 2, 7.
There are others, I believe, at least one more number, but I have no way to check until they stop working. And at the time of typing this post, they seem to be working strangely well.Also, the keys are (almost?) always in the 'non-working state' when the laptop wakes from sleep mode and I have to input the password. Luckily, it offers the On-Screen Keyboard option, which, by the way, works perfectly.
I have been having problems with keyboards on my new Windows 8.1 build. I have been able to replicate this using 2 different USB keyboards (Logitech G15 and Razer BlackWidow).
Every once in a while when I am typing, a key will get "stuck" and type out several times on the screen. So for example, if I was typing the word update, it might look like this.
At first I thought it was the keyboard, but since I have switched and just had it happen on the new keyboard.
I have switched USB ports on my mobo and that didnt seem to work. I am using the default Windows drivers as well for the keyboard.
I recently have been having this issue where whenever I use the media keys (play, pause, rewind, and forward) and the volume keys on my quickfire pro it just refreshes my browser window. This has been happening recently and is very annoying.
I am thinking of replacing my HDD with an SSD in my laptop. My HDD currently makes a clicking noise at random times and I think it might be dying, so I want to be proactive. I plan on buying an SSD and cloning my HDD to it. I have many programs that require a license/key to use (mainly concerned with ArcGIS). After I make the switch, will my subscriptions still be active and ready to use? Other programs I was thinking of were Microsoft Office and antivirus.
I have MSI CX480 and i just upgraded to windows 8 from 7.. my function keys are working before but now that i'm in 8 its not working. i already install my drivers but still, its not working..
Ssince updating windows to windows 8.1.1 my alienware tact x mouse keep lagging on me from time to time, i checked in device manager and everything says its working properly, but it will lag out on me for a few seconds and then work just fine. What could be doing this i did not have any issue before the update.
This seems to be common on all Windows 8 machines as I've tested on many. With Windows 8 if I use the laptop or tablets brightness keys, it goes up in increments it seems of almost like 10%. However if I use touch and slide my finger, you can fine tune the brightness in between. Is there any way to do something similar with the physical keys through an update or plug in? My issue is I'm sensitive to brightness so I use my laptop at the lowest setting, but even 1 notch up is too bright for me, so I'm always using my finger to try and get it right in between which is difficult.
A few days ago I went to turn up the volume from my keyboard and it would TAB me over to a different item on my screen. I tried pressing all of the Function keys and it messed up all sorts of things on my computer. I found out that if I hold down the FN key the F keys will work properly. How can I get it back to normal?
So I was typing something into the search bar for google chrome and when i touched certain key it opened up the app menu or closed the who window entirely. the same happened when i tried to play a game off of steam, why is this happening and whats the best way to stop it?
when ever i had the num lock on and only when its on all the num pad keys are bound to some other key and the space bars is bound to 0 if i type "1" it comes out "12". also the arrow key to go forward will jump all the way to the end of the page. i tried uninstalling the drivers, changing the layout and nothing in working.
I have the keyboard for about 2 months and its just started acting like this 2 days ago. also typematic rate wasn't there
everything was OK until I went to download updates from HP 1Gb worth and then restarting the computer to find I had no wireless recognition, and it seems the downloads didn't download. after a long session with HP and a system restore to before this fiasco, the wireless is back working, but when playing solitaire the fn and z won't let me undo which is a nuisance. also I now have the annoying red alert from the HP assistant wanting me to download.
After installing Windows 8 Pro my @ and " symbols are on the wrong keys, how do I swap them. I have checked the language for my keyboard and all is good.
I'd like to disable the Fn keys on my new HP latop. Or, better said, I'd like to have F1-F12 functionality normally, and when I press Fn, the Active Key Mode (screen brightness, audio, etc) is used. This was super simple in a BIOS environment and damn near impossible in a UEFI environment.
This is really random. The keys are messing up. They either won't work or type double. I can only presume it's a virus. I've tried to gain access to my password protected user account via my guest account but I can't type the password in because of the way it's messing up. I want to use windows defender to try to sort it out.
I bought an HP laptop with windows 8 a few months ago, and since day one I have had this issue. At seemingly random times, the keys will stop using their normal function and start doing other things. For example, the F key will open up my files, hitting my down arrow key will minimize whatever window I have open. Oddly enough, the only way I have been able to figure out how to make this stop for the time is to open up my speech narrator, and then close it, and it makes everything go back to normal.
I think my toddler messed with some buttons on my computer today and now it is all wrong. First I tried using the keyboard to turn up the volume but this did not work. I looked into it and it seemed that my FN keys were reversed. So I followed these instructions: If the volume controls on your keyboard stops working, check the Human Interface Device Access service on your computer to make sure it is set to Automatic.
In the Start menu, type View local services.
From the Search Results list, select View local services.
In the Services dialog box, locate Human Interface Device Access. Make sure the status is set to "Started." If it is not started, click Start the service.
Right-click Human Interface Device Access and select Properties.
On the General tab, in the Startup type, select Automatic, and then click OK.
After doing this, I went to see if it worked and after hitting the volume keys a few times, my mouse disappeared. I restarted the computer, on the login screen the mouse worked fine. But, when I got into the computer the pointer was on the screen but would not move! Now I can't do anything.
Can I somehow copy the hidden activation files from Windows 8.0 Pro WMC to a Windows 8.1 Pro WMC installation and get it activated?! I have legit keys for Pro 8.0 with WMC but I would like to make a fresh install on a different system but with 8.1... any workarounds or do I just have to wait for windows update to get 8.1 and then copy the activation files... ?
I have Windows 8.1 activated by phone. I wrote down my key, first part of numbers which is my ID and Confirmation ID which I got from phone bot Will I be able to use this information to activate Windows 8.1 Update 2014?
I cannot stand having to hold the "Function" key plus the volume up F12 or down F11. I want to remap some keys to be a direct volume up and volume down.
At the beginning, when I have started to setup windows 8 ,everything goes okay until the product key, I get an error message saying 'We couldn't verify the product key. Check the installation media'
And I had tried to install windows 8 on another PC with having same product key then I have noticed the product key has worked on that Pc! and not working on my PC.
So I have tried several times to enter lots of keys. why my PC is not verify any product keys?
What do I have to do to get the product keys for the installed operating system? What do I do to re-install in case of a failure. Where is my copy of the software so I can re-install it?
