I'm trying to connect my SSD to USB3.0 using an "adapter cable" (2.5" SATA HDD to USB 3.0)
The connection is however "unstable" going on/off/on/off in my Disk Management. Switching to USB 2 , the instability vanish
Searching this forum I see others having problems with their USB 3.0 as well , so I have:
- Adjusted the advanced power settings
- Disabled Fast Startup
- Disabled USB selective suspend setting
The instability has improved, but not been resolved.I have not checked the speed on the USB but I strongly suspect, I only get USB 2 speed (as many others describe)
As the USB 3.0 is on the left side of my Acer V5 (OEM Windows 8.1) and both of the USB 2.0 ports are on the right () , I'm not able to make use of any Y-cable either ..... I do not know if my USB 3.0 is 150mA or 900mA , however I have a strong suspicion .
So at the moment I only have no USB 3.0 functionality
My ISP provides secure imap access to my email accounts hosted on their servers. Recently, my company blocked port 993 (imap ssl) - however, port 443 remains open (https). At my home router, I can forward port 443 to my Windows 8 64-bit machine. I'm looking for a program that will redirect traffic inbound on port 443, outbound on 993 to my ISP's email server so I can use imap at work.
Is this something that can be natively done, and if not, is there such a program? It looks like there is something called PassPort for XP that might do it (PassPort port forwarding utility Win XP | Free System Administration software downloads at SourceForge.net), but I was wondering if there was something better.
I am having trouble with my USB 3.0 port.Whenever I plug anything (usb, mouse, portable hard drive etc) into that particular port, "Client Server Runtime Process" would use 100% of the CPU. However, when plugged into the USB 2.0, all seems to be fine.
I do not want to check the speed on a USB 3.0 flash drive or external drive. I need to know the speed of the port itself is transferring at full 3.0 capacity.
What I have is an external mechanical USB 3.0 hard drive. I know it's a 7200 rpm drive. My 3.0 USB ports on my laptop are not using the blue USB plastic to denote 3.0 speeds, they use black plastic.
Therefore I am not confidant they are running at full 3.0 speeds. I want a tool that will measure the port speeds independently of any drive or device on the USB port.
I did find this but I do not have any Advanced tab to check for or to reset the device to Super
There are four USB specs: 1.0, 1.1, 2.0, and 3.0. But to confuse things, each USB spec has more than one data rate assigned to it. Those rates are "low", "full", "high", and "super."
Therefore, benchmarking data throughput solely on speed is not necessarily conclusive as to what the actual spec being used. Thus, a USB 3.0 port may not be actually running at a "super" rating but at a "High" rating instead.
On a Windows machine, check the data rating of the USB root/hub - Goto: Device Manager --> USB Controllers --> USB Root Hub (Right Click) --> Properties --> Advanced (Tab).
It should tell you the data rating for the USB hub/port. Once you know that, you'll know the maximum throughput from the computer's POV.
Low = 1.5 Mbps Full = 12 Mbps High = 480 Mbps Super = 5 Gbps
Windows - Verifying USB connection speed (USB 3 or USB 2?) - Super User
Here is what the listing looks like in device manager Under the two 3.0 USB hubs at the top, there is no advanced tab.
I got a new mouse a couple of days back, it's one of those fancy Razer mouses with 12 buttons on the side that is used for gaming and stuff. I have an issue when I try to use usb 3.0 instead of 2.0 ports. ( my tower only has like 2 2.0 ports so I try to use those for other things ) I am trying not to buy a usb hub before somebody says it
On games ( fullscreen or Windowed ) quickslot controls where you can use the numbers on your mouse I can't use the 3.0 port as it won't recognize the side buttons but it will on the 2.0 port.
I am guessing this is a driver problem but I am unsure. Neither the native mouse driver for Windows nor the fancy Cloud Synapse driver 2.0 works.
How do I change the Com port for my modem in Windows 8? When I google around the instructions say to reinstall the modem, but I just installed it and it has the wrong port. It seems to default to Com 1 and my modem is on Com 4. So, how do I change the modem com port from Com 1 to Com 4? If Microsoft provided no method of changing it (incredible if true) then where is it stored -- registry, ini file, etc.?
when i try to install a driver for the serial port PCI i get this error message : " Windows found a driver for your device but encountered an error while trying to install, installation of this device is forbidden by system policy. contact your system administrator . " knowing that i am the administrator!!
How do you turn your microphone port or line in, to a headphone port or line out port. For a while I would plug in headphones into the mic port and it would bring up a dialog saying I could change it to another headphone port but it never worked. Now it doesn't even pop up. I want this so when I go on long trips my girlfriend and I could watch a movie together using 2 pairs of headphones.
I installed Windows 8 Pro 64bit yesterday and I noticed that the CPU speed is always unstable/throttling. 800MHz jumping to 2.1GHz and 3.6GHz Max speed constantly, while in Windows 7 the CPU speed is much stable than 8. I installed all the latest windows 8 drivers,clean format,etc. Im running Build 9200.
Recently bought 3 laptops for the household (1 HP Envy TouchSmart m7 Sleekbook, and 2 Gateway NV570P10u Touchscreen Laptops)
Laptops came with Windows 8, I immediately upgraded to Windows 8.1 so I cannot say if things were working when I had Windows 8
I have all these laptops connected to the Internet via DLink-Dir655 Router. Additional devices connected to the router/internet are a wireless printer, server running Windows Server 2008, laptop running Windows XP Professional, and a laptop running Windows 7 64-Bit Home Premium (along with couple cell phones running Android). All other devices have absolutely no connectivity issues ... Only the 3 laptops running Windows 8.1 keep giving us headache to a point we can hardly connect to the Internet using these (Winows 8.1) laptops
Interestingly, when I connect laptops via Ethernet cable connection is "little more stable" but I still get disconnects ("page cannot be displayed" errors) which leads me to the conclusion that it is not Wireless card always but Router or its settings are also playing a role.
We can focus on HP laptop to address this issue. It has Intel Centrino N-2230 as its built-in wireless card. Was having lots of disconnects or pages partially displayed but when I attached an old MediaLink Dongle (USB WiFi Card), internet connection became lot more stable. It is atleast 10x more stable compared to built-in wireless card but I still gets disconnected even with this dongle (and Ethernet cable as mention before)
PS: I tend to believe it is router's compatibility ... Otherwise why Ethernet Cable is giving the connectivity issue? But router is listed as compatible with Windows 8 on MS Website and Ethernet connection is 10x more stable than Wireless connection.
My Surface 2 has this issue where it is connected to the wireless network at first and then it gets limited connection followed by no connection until it re- connects. Sometimes it happens a lot, other times a bit more rarely but overall I feel it has been getting worse lately.
I have tried turning off the router as well as removing that specific connection from the Surface through command prompt and re-connect, but neither has worked.
I have tried trouble shooting the network to no avail, and according to device manager my network drivers are up to date so I don't know what's going on.
Since yesterday the internet began to act unsoundly (through WiFi). As in I never had this problem before. There were periods where it was fast enough to play some online games, watch Youtube no problem, and then it would shut off randomly. So since yesterday I have been restarting the modem with only very short term resolutions to the issue.
I accessed the modem through my web browser and it says the connection is always working fine. Despite that, I called my ISP and they claimed there was an issue, and forwarded it to Deutsche Telekom. Since then I did some experimenting and plugged my computer into the modem with the ethernet cable.
Boom. No problem whatsoever. It's been top speed and reliable.
I downloaded and installed updates for Windows today. There are 18 optional ones that I did not download yet, but I did download and install the important ones no problem. I checked the network adapters and they all state "The best driver for your software is already installed."
I don't want necessarily to remove SKyDrive but it annoys the hell out of me when my files go to it and not to Documents which is where I want them. I do not know how to stop Skydrive being the first port of call for all my saved files or how to replace it with the good old fashioned Documents File. I am sure I am not alone in thinking that the Microsoft techies did a lousy job trying to better Win7 with this appalling Windows 8.1. I am about to buy a new laptop but what was once a real pleasure is now going to be a pain in the neck to have to get a new laptop with Windows 8 on it.
for starters, this is a sony vaio e series laptop...
I know, if I enable the option, when I do a normal shutdown I can charge, say my mp3 player from my usb 3.0 port.
what I want to know is if I close the lid like I normally do at the end of my day, can I charge my device and not say..wake the computer from what is essentially a hybrid shutdown type sleep mode?
just noticed my Vaio ethernet port isn't working. it says the adaptor is working normally, but when I plug in an ethernet cable is says the cable is not plugged in. I tried it with two different cables that work elsewhere.
I wonder if the laptop ethernet card is faulty? Wireless is working fine.
I only ever use it to hard connect the router during setup, so it could have been out of order even before my Win7 to 8.1 upgrade.
I've been having an issue with my Acer S7-391. I bought the Windows 8 machine in December, and the majority of the time when I start it up in the morning, it doesn't boot properly - it hangs on a black screen for ages. I then have to hit the off button and boot it back up again and, sometimes, it boots after having to go through a system repair. Also, sometimes it does boot properly from the get-go without having to jump through hoops - not often though.
Originally I thought it was an issue with me having upgraded to Windows 8.1 shortly after buying the laptop, but having rolled the machine back to Windows 8, the issue prevailed. Through trial and error, though, I've figured out when it does and when it doesn't boot properly (yeah, I'm slow). Basically, it never boots properly when I have a USB mouse/keyboard plugged in. I take them out, boot the machine, and can plug them in again almost immediately and everything works fine. But NEVER does it boot with these devices plugged in from the start.
Here's a photo of it anyway (below).
Any solution here - other than unplugging my USB peripherals on boot - t'
How do I change the USB port that Windows to Go listens the drive while in use?
I have this computer, with an Asus P8H61-LE Motherboard. As you expect, it doesn't pack USB 3.0 ports. But it does come with some nifty PCI-E x1 slots, so I've bought a random USB 3.0 PCI-E card, with 40 pin for front panel. Works amazingly. Fast and beautiful, exactly what I've expected. BUT, it doesn't have its own BIOS or something, so my UEFI BIOS cannot boot from devices connected to it. In fact, it doesn't even detect anything there until I boot up to the O.S.!
And I have this Windows to Go Setup. Works like a charm on USB 2.0, but sometimes I feel the bottleneck, and wouldn't hurt using my only USB 3.0 device on those USB 3.0 ports, eh? I've tried disconnecting and reconnecting it on USB 3.0, but WTG just ignores it as if it weren't there. Even when I connect to a different USB 2.0 port, it doesn't detect.
This USB port remapping would serve for other uses too. Once, I've connected my drive to a client's computer, for repairs. But it took longer than I expected, and I had it connected on the front USB. I needed to connect other thumb and external hard drives and had to use the rear USB ports for this, because WTG didn't detect anywhere else.
I have a linksys WRT54G router connected to a beetel 110TC2 modem. I want to get a static ip address for port forwarding. How to get a static ip and how to do port forwarding?
I have a HP Pavilion dv6t-3000 CTO Entertainment Notebook PC.
I upgraded from windows 7 to windows 8 64 bit. I have an ATI mobility radeon HD 5000 series (Microsoft Corporation - WDDM v1.20) and an intel(R) HD graphics card.
Next to the ATI mobility in device managers, there is an exclamation point in a yellow triangle. when i open it up, it says This device cannot start. (Code 10) {Operation Failed} The requested operation was unsuccessful.
I have tried updating it but it says it is up to date. i have tried going to the HP support page but it only gives me options for a windows 7 computer and says there is nothing for my computer for windows 8.
I am on a laptop with a gtx 765m. I am trying to connect a thunderbolt port to a display port monitor. My understanding is that thunderbolt is backwards compatible with display port. But, for the life of me I can not get it to work.
I am using a minidisplay port -> display port cord.
I have ended up hooking the monitor up with an hdmi cord for now. FYI the monitor is a 2560x1440 monitor if that matters.
In a few weeks (I can't wait! ) I will replace my laptop with the Surface Pro.
Right now, though, I have my laptop connected to two monitors: One via VGA and other via DVI. I'm running Windows 8 Pro x64, so this all works great.
So the big question is whether it is possible to have multi-monitor support via the one-and-only DisplayPort that is on the Surface Pro? If so, what--if any--additional hardware would I need?
When I'm docked at home and using my Surface Pro as laptop, I really need to keep the functionality of using both external monitors (one is 31" and the other 29"). I would really hate to go back to only being able to use one.
So I'm running 2xR9 290X (crossfire) with 3xQnix Qx2710 monitors. One of the qnix monitors was purchased with HDMI/DisplayPort connectors along with the usual DVI connector (normally these monitors only come with the D-DVI input)
I had a 2 monitor (with just the two DVI-only monitors) setup for a while that was working fine.
Since installing the third monitor I'm experiencing several weird things:
- On boot, until the Windows login screen comes up (Windows 8.1), there is nothing on the non-primary DVI monitor (so my setup is my primary monitor is one of the two DVI monitors, and then the left and right monitors is another DVI-only and the DP monitor).
- If the monitors go to sleep, or I put the computer to sleep and wake it up, any windows that were on the non-primary DVI monitor are moved over to the primary DVI monitor. Windows on the DP monitor do not move in this configuration.
- Within CCC, after sleep / monitors off, I have to restart CCC's control of the color settings for the non-primary DVI monitor. (I'm forgetting what the actual button says, but it's the button under the Display color controls settings where you can manipulate the R/G/B channels - I have to use the GPU for color matching since the monitors don't have any inherent ways to change R/G/B levels
If I only connect the two DVI monitors this is not an issue.
If I connect one DVI and the DP monitor, after sleep/wake any windows that were on the DP monitor are moved over to the primary monitor (again, note that this didn't happen when all 3 monitors were connected).
I have tried the newest version of CCC, as well as the current beta version - same behavior in both.
I have tried using HDMI instead of DP - same behavior
Aspects of this sound similar to the issues discussed in this post : [URL] ......
What I don't understand is why the second DVI monitor is acting so oddly when all 3 monitors are connected. Why would there be no picture when the computer boots?
I have a custom built system running Windows 8. I recently changed the Sata port config, changing one of my drives to another port that was supposed to be for a case esata port. After this, my hard drives would not work together and the computer would randomly crash when I try to access My Computer or anything that makes the hard drives run. It's really hard to use as my programs/files are spread across these three drives.
I'm having a rather annoying issue on Windows 8 with my ASUS Laptop.
When moving from Wi-Fi to Ethernet (disable Wi-Fi, plug-in Ethernet cable then enable Ethernet port) my computer fails to recognize the Ethernet connection. I have to restart my computer to solve the problem.
Does the Asus Vivo Smart ME400 micro-USB port support USB devices like flash drive - keyboard - mouse - HD & CD drive? If yes, where do I get the right USB adapter for it?
I have an ASUS RT-AC68U router with 9 DBI dual band antennas. I need a program that allows me to copy and paste files to the external hard drives which are connected to the router's USB ports. An example of the application I am seeking is called "Silex Virtual Link", I need one like this, I used to use this 1 on my old D-Link DIR-825 router but it is not working with my new ASUS router and ASUS tech support couldn't solve anything.
I downloaded the drivers for windows 7 x64bit for the SD card reader in my system. I have installed Windows 8.1 Pro x64.
I had the same issue with Windows 8 and now that I have settled on 8.1 need to fix my card reader. Funny thing is that the drivers from Microsoft load (2006) and all devices look fine in Device Manager.
Even after installing the link from Acer and even searching around and getting other ones from Lenovo, HP still no go.
I have recently bought a ASUS X550LC Laptop in that. i was trying to install bluetooth drivers but it crashes frequently during the installation. i have tried a lot and i cant able 2 solve the problem.
