How do you turn your microphone port or line in, to a headphone port or line out port. For a while I would plug in headphones into the mic port and it would bring up a dialog saying I could change it to another headphone port but it never worked. Now it doesn't even pop up. I want this so when I go on long trips my girlfriend and I could watch a movie together using 2 pairs of headphones.
WIN 8.1
so i opened my port 25565 (or so i thought) went to test to see if its open on multiple sites and....all of them say its closed.
View 9 Replies View RelatedMy ISP provides secure imap access to my email accounts hosted on their servers. Recently, my company blocked port 993 (imap ssl) - however, port 443 remains open (https). At my home router, I can forward port 443 to my Windows 8 64-bit machine. I'm looking for a program that will redirect traffic inbound on port 443, outbound on 993 to my ISP's email server so I can use imap at work.
Is this something that can be natively done, and if not, is there such a program? It looks like there is something called PassPort for XP that might do it (PassPort port forwarding utility Win XP | Free System Administration software downloads at SourceForge.net), but I was wondering if there was something better.
I have an audio source connected to Line In and I use the volume mixer to un-mute the input when I want to listen to the audio from that source. I recently started having a problem where after re-booting Line In does not show up in my volume mixer and I do not hear audio from the Line In Source even though I have listen to this device active. (during boot up I do hear the audio for a fraction of a second)
To get Line In to work and show up in the volume mixer again, I have to go to manage audio devices under control panel and select the record tab. from there I can see Line In and I see that it is set as the default device and I can see that there is audio based on the indicator bars to the right of Line In. I then have to go to the Listen tab for Line In and uncheck "Listen to this device" and click on Apply, then Check "Listen to this device" and Click Apply. After doing all of this the Audio can be heard and Line In appears on the Volume Mixer until the next reboot where I have to perform those steps all over again.
I have the latest drivers and all MS updates for Windows 8.1 on a Gigabyte GA-Z87X-UD5H Motherboard with Realtek R3.87 Driver dated 5/13/2014...
I am trying to record from a cassette player on to my hp envy h8-1500z. I have a cable going from the headphone jack on the player to the blue line in jack on the pc. I have gone to the recording devices and have the line in jack enabled. That is as far as I can get because it says it is not plugged in? I have plugged it into the mic jack and it recognized that. I have tryed updating the drivers to no avail.
View 1 Replies View RelatedAfter about 20-40 minutes of being online the connection drops . this has been going on since the 8.1 upgrade from windows 8..
View 5 Replies View RelatedFont colors, line colors, shape colors, etc. in Word, PowerPoint and Visio do not display.
View 2 Replies View RelatedWe are upgrading our office to windows 8, but 1 computer is hardly ever used and is running XP. It will stay with XP, and should not be allowed to go online for security reasons.
All computers are networked, and share printers thru a netgear vpn router. Of cause they all can go online. Question: How can I prevent the XP computer from going online?
I opened the netgear router settings ( http://192.168.0.1 ), but can not find any setting blocking a computer from going on line.
I didn't have this line before but my little nephew has done something wrong while he used File Explorer so it looks to me really irritated.
View 8 Replies View RelatedI am very new to Windows 8. I'm trying to print a line drawing that is saved as a jpeg. I need to print it at 250%, but how to do so. When I try to print it, it does not give me the printer options like previous versions of Windows did. Advanced options only allow me to choose orientation and page order. It does allow me to choose size as far as full page, 8x10, 5x7, 4x6, contact sheet, etc, but this is not what I need. I need to be able to print actual size and scale up (or down) from there.
View 9 Replies View RelatedI made from my homeuser account a administrator account but after that i decided to put it back as homeuser. So my problem now is:
When I download something it asks for a administrator password but there is no line to type any password and i can't click on yes.
I just recently upgraded my system to Windows 8 PRO 64 bit edition. I noticed on my desktop there are these around my icons. Is there any way to get rid of them, or disable them?
View 4 Replies View Relatedi have a variety of apps in the startup folder which is set to launch on startup. eventually, i'd like windows to focus on Chrome (specifically on the address bar) so that i can start using it right away.
i remember there's a command which could be added to the shortcut properties but can't recall.
I have this dark horizontal line that appears in windows explorer every time I'm in a window, It appears right at the bottom of the navigation bar, its not glaring though, just that its distracting and every time I hover around it, I See the "move" cursor which doesn't do anything. How do I get rid of this line? It was never there as at the last time I restarted my PC.
View 9 Replies View RelatedHow do i uninstall programs from the command line? I know how to do it in windows, and i did that, but they still are there in my start/metro screen. When i click on them they open into a command prompt window. If i click uninstall from metro it just takes me around to add/remove programs where they have already been deleted?
View 3 Replies View RelatedI noticed yesterday that there is a very fine thin line on the left side of my desktop. In the screen shot you can barely make it out, but you will be able to once you see ot from the left corner of task bar. it does not appear when i open a browser or a folder or even start menu. It only shows on the desktop screen and is really annoying. I tried disabling some odd services and restarted the computer as well, but still no luck.
P.S: Screen shot is below.
I want to launch the Windows Store Control Panel in Windows 8 from Desktop command line, i know the EXE file is
"C:WindowsImmersiveControlPanelSystemSettings.exe".
In many programs there are keyboard shortcuts . They are shown as capital letters with a line underneath. How does one use them? I've tried the letter with control key, shift key and alt key and frequently combinations of them but cant get any response.
View 2 Replies View RelatedI have a Dell XPS12 Ultrabook (amongst other things) and out of the blue a white line of pixels popped up on my desktop. It is there no matter what windows or programs I have open through the desktop however when I go to the start screen or open any other tile it goes away....I've tried restarting, changing the resolution, etc and can't make the line go away. Its still under warranty if it was the screen, but in the past my experience with blown out pixels (white lines on the screen) has been a screen replacement because its there no matter what....this goes away in the start screen or any other tile.... None of my other laptops/tablets with windows 8 have done this before.
View 9 Replies View RelatedI am having trouble with my USB 3.0 port.Whenever I plug anything (usb, mouse, portable hard drive etc) into that particular port, "Client Server Runtime Process" would use 100% of the CPU. However, when plugged into the USB 2.0, all seems to be fine.
View 5 Replies View RelatedI don't want necessarily to remove SKyDrive but it annoys the hell out of me when my files go to it and not to Documents which is where I want them. I do not know how to stop Skydrive being the first port of call for all my saved files or how to replace it with the good old fashioned Documents File. I am sure I am not alone in thinking that the Microsoft techies did a lousy job trying to better Win7 with this appalling Windows 8.1. I am about to buy a new laptop but what was once a real pleasure is now going to be a pain in the neck to have to get a new laptop with Windows 8 on it.
View 3 Replies View RelatedI'm trying to connect my SSD to USB3.0 using an "adapter cable" (2.5" SATA HDD to USB 3.0)
The connection is however "unstable" going on/off/on/off in my Disk Management. Switching to USB 2 , the instability vanish
Searching this forum I see others having problems with their USB 3.0 as well , so I have:
- Adjusted the advanced power settings
- Disabled Fast Startup
- Disabled USB selective suspend setting
The instability has improved, but not been resolved.I have not checked the speed on the USB but I strongly suspect, I only get USB 2 speed (as many others describe)
As the USB 3.0 is on the left side of my Acer V5 (OEM Windows 8.1) and both of the USB 2.0 ports are on the right () , I'm not able to make use of any Y-cable either ..... I do not know if my USB 3.0 is 150mA or 900mA , however I have a strong suspicion .
So at the moment I only have no USB 3.0 functionality
for starters, this is a sony vaio e series laptop...
I know, if I enable the option, when I do a normal shutdown I can charge, say my mp3 player from my usb 3.0 port.
what I want to know is if I close the lid like I normally do at the end of my day, can I charge my device and not say..wake the computer from what is essentially a hybrid shutdown type sleep mode?
just noticed my Vaio ethernet port isn't working. it says the adaptor is working normally, but when I plug in an ethernet cable is says the cable is not plugged in. I tried it with two different cables that work elsewhere.
I wonder if the laptop ethernet card is faulty? Wireless is working fine.
I only ever use it to hard connect the router during setup, so it could have been out of order even before my Win7 to 8.1 upgrade.
I've been having an issue with my Acer S7-391. I bought the Windows 8 machine in December, and the majority of the time when I start it up in the morning, it doesn't boot properly - it hangs on a black screen for ages. I then have to hit the off button and boot it back up again and, sometimes, it boots after having to go through a system repair. Also, sometimes it does boot properly from the get-go without having to jump through hoops - not often though.
Originally I thought it was an issue with me having upgraded to Windows 8.1 shortly after buying the laptop, but having rolled the machine back to Windows 8, the issue prevailed. Through trial and error, though, I've figured out when it does and when it doesn't boot properly (yeah, I'm slow). Basically, it never boots properly when I have a USB mouse/keyboard plugged in. I take them out, boot the machine, and can plug them in again almost immediately and everything works fine. But NEVER does it boot with these devices plugged in from the start.
Here's a photo of it anyway (below).
Any solution here - other than unplugging my USB peripherals on boot - t'
How do I change the USB port that Windows to Go listens the drive while in use?
I have this computer, with an Asus P8H61-LE Motherboard. As you expect, it doesn't pack USB 3.0 ports. But it does come with some nifty PCI-E x1 slots, so I've bought a random USB 3.0 PCI-E card, with 40 pin for front panel.
Works amazingly. Fast and beautiful, exactly what I've expected. BUT, it doesn't have its own BIOS or something, so my UEFI BIOS cannot boot from devices connected to it. In fact, it doesn't even detect anything there until I boot up to the O.S.!
And I have this Windows to Go Setup. Works like a charm on USB 2.0, but sometimes I feel the bottleneck, and wouldn't hurt using my only USB 3.0 device on those USB 3.0 ports, eh? I've tried disconnecting and reconnecting it on USB 3.0, but WTG just ignores it as if it weren't there. Even when I connect to a different USB 2.0 port, it doesn't detect.
This USB port remapping would serve for other uses too. Once, I've connected my drive to a client's computer, for repairs. But it took longer than I expected, and I had it connected on the front USB. I needed to connect other thumb and external hard drives and had to use the rear USB ports for this, because WTG didn't detect anywhere else.
I do not want to check the speed on a USB 3.0 flash drive or external drive. I need to know the speed of the port itself is transferring at full 3.0 capacity.
What I have is an external mechanical USB 3.0 hard drive. I know it's a 7200 rpm drive. My 3.0 USB ports on my laptop are not using the blue USB plastic to denote 3.0 speeds, they use black plastic.
Therefore I am not confidant they are running at full 3.0 speeds. I want a tool that will measure the port speeds independently of any drive or device on the USB port.
I did find this but I do not have any Advanced tab to check for or to reset the device to Super
There are four USB specs: 1.0, 1.1, 2.0, and 3.0. But to confuse things, each USB spec has more than one data rate assigned to it. Those rates are "low", "full", "high", and "super."
Therefore, benchmarking data throughput solely on speed is not necessarily conclusive as to what the actual spec being used. Thus, a USB 3.0 port may not be actually running at a "super" rating but at a "High" rating instead.
On a Windows machine, check the data rating of the USB root/hub - Goto: Device Manager --> USB Controllers --> USB Root Hub (Right Click) --> Properties --> Advanced (Tab).
It should tell you the data rating for the USB hub/port. Once you know that, you'll know the maximum throughput from the computer's POV.
Low = 1.5 Mbps Full = 12 Mbps High = 480 Mbps Super = 5 Gbps
Windows - Verifying USB connection speed (USB 3 or USB 2?) - Super User
Here is what the listing looks like in device manager Under the two 3.0 USB hubs at the top, there is no advanced tab.
I got a new mouse a couple of days back, it's one of those fancy Razer mouses with 12 buttons on the side that is used for gaming and stuff. I have an issue when I try to use usb 3.0 instead of 2.0 ports. ( my tower only has like 2 2.0 ports so I try to use those for other things ) I am trying not to buy a usb hub before somebody says it
On games ( fullscreen or Windowed ) quickslot controls where you can use the numbers on your mouse I can't use the 3.0 port as it won't recognize the side buttons but it will on the 2.0 port.
I am guessing this is a driver problem but I am unsure. Neither the native mouse driver for Windows nor the fancy Cloud Synapse driver 2.0 works.
How do I change the Com port for my modem in Windows 8? When I google around the instructions say to reinstall the modem, but I just installed it and it has the wrong port. It seems to default to Com 1 and my modem is on Com 4. So, how do I change the modem com port from Com 1 to Com 4? If Microsoft provided no method of changing it (incredible if true) then where is it stored -- registry, ini file, etc.?
View 1 Replies View RelatedI have a linksys WRT54G router connected to a beetel 110TC2 modem. I want to get a static ip address for port forwarding. How to get a static ip and how to do port forwarding?
View 5 Replies View RelatedI have a HP Pavilion dv6t-3000 CTO Entertainment Notebook PC.
I upgraded from windows 7 to windows 8 64 bit. I have an ATI mobility radeon HD 5000 series (Microsoft Corporation - WDDM v1.20) and an intel(R) HD graphics card.
Next to the ATI mobility in device managers, there is an exclamation point in a yellow triangle. when i open it up, it says
This device cannot start. (Code 10) {Operation Failed} The requested operation was unsuccessful.
I have tried updating it but it says it is up to date. i have tried going to the HP support page but it only gives me options for a windows 7 computer and says there is nothing for my computer for windows 8.