Hardware Drivers :: Migrating From RAID To SSD And Switching To AHCI
Sep 15, 2014
Currently using Onboard RAID1 which is just a pair of 1TB SATA drives that boots into windows 8.1. SATA BIOS mode is set to RAID.
I need want to switch the onboard SATA mode to AHCI so I can boot to SSD, instead.
I'm sure some have tried this: If you just clone the RAID partition as it sits on to the SSD, it will not boot the SSD when the SATA Bios mode is set to AHCI.
So, besides a bare-metal reinstall, how do move my Windows 8.1 installation on to the SSD so that when its all done the SSD will boot into windows and the SATA Bios is in AHCI mode? I'm not opposed to purchasing software like Macrium or Acronis if any of those can do the job.
It seems like anyone using onboard RAID would have run into this problem after purchasing an SSD.
View 6 Replies
ADVERTISEMENT
Mar 25, 2013
I have a SSD and tried to switch to AHCI without having to reinstall. A guide suggested i had to do to device managers and then select my IDE items, select manually install driver and install the driver for AHCI
Well now i can't boot windows 8 anymore. I get an error message before the loading is finished, and i don't even have the time to read it my computer will instantly reboot and do the same thing over and over again
Setting the BIOS to AHCI will just cause another error. Windows8 won't boot and will tell me i need to repair it.
Automatic repair from install CD isn't useful. I don't have any system restore point.
View 7 Replies
View Related
Jan 23, 2014
One day, I changed the configuration of IDE to AHCI through Windows registry and configuring the BIOS parameters. Today, I want to go back to IDE without reinstalling Windows. I do not know how to do.
View 4 Replies
View Related
Nov 6, 2013
So I switched over to the SATA setup via BIOS in attempt to improve my SSD performance. I knew I had to reinstall on the SSD but my I am not able to read or even format my second HDD that was also in AHCI. Is there any way to (would be awesome if) read, or at least format my drive so I can use it again? I tried disk management and other options within the OS and couldn't format.
it's an MSI 990xa gd-55 mobo. Which I am ashamed to even own because it sucks.
MSI USA ? Motherboard - 990XA-GD55
View 9 Replies
View Related
Dec 7, 2013
i have recently bought an SSD. I have heard from a youtube video that changing the Sata controller from IDE to AHCI can give me better performance but i tried to enable this and it doesn't recognize the drive. The PC will not boot in AHCI mode which meant i have to switch to IDE again. I have tried booting from the Windows install DVD but it tells me that i cannot install Windows on this drive. Am i missing something?
View 4 Replies
View Related
May 26, 2014
I had to reinstall windows. I had a raid 0 with 2 drives, when I started widows the drive couldn't be accessed. so the only option was to convert to dynamic disk. I did that but still cant read or change drive letters. I am pretty sure my data is still on it. but how can I read this disk?
right now I am scanning it with easeUS data recovery and it looks like its finding files. any other way to read the drive?
raid was made with the bios
View 1 Replies
View Related
Mar 15, 2013
The OS is installed while the mode was set for IDE, and afterward it was changed to AHCI. Now, the system does not boot. "Attempting repair" is displayed and the process does not advance.
Windows 8 is installed on a ssd and a hdd, and both exhibit the same symptom.
The system includes GA-970A-UD3, FX-6300, DDR3 1866 4GBx2, 1TB SATA3 and 120GB SATA3 SSD.
View 9 Replies
View Related
Dec 21, 2013
Recently I've upgraded my toshiba laptop with w7 to Windows 8.1 (without keeping any settings), but I cant get my synaptics touchpad to work.
Windows automatically installed some drivers for the touchpad but it didnt work. Then I downloaded newest generic drivers from synaptics website but they wouldnt install - I get an "installation failed" error without any elaboration.
So I've installed synaptics driver that was provided for my laptop for win 7. It installed nicely, but the touchpad still doesnt work - disabling/enabling it in synaptics tab in mouse settings doesnt change anything.
I thought that maybe now the generic driver will install that I have an older synaptics version installed and not some random windows driver, but no, the installation still fails.
The story unfolds :P Next I downloaded toshiba synaprics driver for win 8.1 that was developed for some newer laptop model as mine is no longer supported. The installation went smoothly but the touchpad still doesnt work.....
View 2 Replies
View Related
Mar 3, 2013
Ever since switching to AHCI mode, I've noticed that my keyboard has issues with the volume wheel not working properly. Also after setting up the LED lighting on the keyboard and a few restarts later, I've notice that when restarting my system the keyboard LED, blue in this case, will automatically show up and when it does, and I use the del key to get into BIOS doesn't work. I have to move the the usb connection to a different port, restart and keyboard LED will be white. This time using the del key, I can get into my BIOS no problem. This never happened when I was using native IDE mode.
View 1 Replies
View Related
Oct 4, 2013
A couple of weeks ago, I cloned my HDD C drive to a new 250GB Samsung 840 EVO SSD.
After fitting the SSD in place of the old HDD, the system rebooted fine and worked well with a very noticeable increase in the speed at which Windows loaded.
However, Samsung's "Magician" software informed me that the drive was running in SATA mode and that better performance would be obtained by switching the Storage Configuration parameter to AHCI mode in the BIOS on my ASUS P7P55D Pro motherboard.
So, I tried this but Windows would not load. I didn't get a BSOD as such... I'd get the Windows 8 start-up logo with the spinning dots below for a while, then the screen would go blank, then a message would flash briefly on the screen saying something along the lines of "Windows has experienced a problem and was unable to start so your computer is being restarted" (not exact words as it's not on screen long enough for me to read) and my computer reboots. This startup/error/reboot loop is repeated until I enter the BIOS and switch Storage Configuration back to IDE whereupon all is back to normal.
Further research then revealed that I needed to tweak the registry so I did this but I still get the startup/error/reboot loop.
Next I tried booting into SAFE mode as described in this thread. It'll boot fine if I leave Storage Configuration set to IDE but not if I change it to AHCI. It just goes back to the same old startup/error/reboot loop and Windows makes no attempt to install any new drivers.
I know I could do a clean install of Windows but I don't really want to go down that route if I can possibly avoid it.
I strongly suspect that the motherboard's Intel(R) 5 Series/3400 Series SATA AHCI/RAID Controller does not have the right driver installed that would enable AHCI mode to work. Is there a way that I can force installation of an updated driver? Is there such a thing (device manager tells me the latest driver is installed)?
I can live with IDE mode as the computer boots considerably faster from the SSD and programs load much quicker too but not being able to use AHCI mode is bugging
View 9 Replies
View Related
Jul 20, 2014
I currently own but don't have installed (although I did try installing on friday july 18 2014) a lsi megaraid 9341-4i raid controller. When I had it installed, I disabled the intel rst and used my marvell secondary controller for my optical drive putting my two ssd's I wanted to raid on the lsi controller. I also switched all of my storage settings for windows 8 to legacy and not UEFI in windows since the controller can only be seen by the motherboard in legacy mode. After that, I configured the lsi bios to create a raid 0 on the ssd's and proceeded to install windows 8.1 64 bit. When I get to the point of a fresh install of windows and it asks me to load a driver, I do and it finds the 9341-4i and installs the driver. However, when the driver is done installing, there is no raid array to be found. I redid the raid array with full initialization and still no dice. My question is: why is windows not seeing any raid array after the driver successfully installs. I am using the most current from LSI's website windows 8.1 64 bit driver for the card too.
View 1 Replies
View Related
Oct 23, 2013
I tried installing the 8.1 Intel SATA/RAID driver from the ASUS website P8Z68-V motherboard model, but when enabling AHCI in BIOS I'm getting blue screens which is making me think something isn't configured properly in the OS. How to properly enable this in 8.1 yet? I'd definitely like the extra speed out of my SSD
View 8 Replies
View Related
Feb 14, 2014
I am thinking of replacing my HDD with an SSD in my laptop. My HDD currently makes a clicking noise at random times and I think it might be dying, so I want to be proactive. I plan on buying an SSD and cloning my HDD to it. I have many programs that require a license/key to use (mainly concerned with ArcGIS). After I make the switch, will my subscriptions still be active and ready to use? Other programs I was thinking of were Microsoft Office and antivirus.
View 1 Replies
View Related
Jun 20, 2013
I have a second hard drive on my HP DV7 laptop. It's a 750GB Hitachi.
Last week I started getting a SMART event and it would ask if I wanted to check the disk. Now every time I start the computer, it's running chkdsk and found a bunch of bad clusters. Also Some of my directories are missing, yet the space available remains the same, so its not deleting the directories and freeing up the space.
I'm recovering the data tonight but I have a few questions:
1) My data recovery software has the option to skip bad directories. Should I do this? And if I do not skip this, will this simply transfer the errors to the hard drive that I'm recovering to.
2) If I clean and then reformat, will the disk be usable? Or should I just junk it and get a new one.
View 8 Replies
View Related
Feb 18, 2014
Trying to migrate my system from HD to new SSD. I have system image saved to an external HD via USB 2.0, and also to DVD's.
When I try to restore from the external HD, the recovery window gives me only the option to restore to C: (system), when I want to restore to the SSD.
Restoring from the DVD doesn't work either.
Is migrating possible without 3rd party software? If not, any method which will work with 8.1?
Win 8.1 64-bit
HP ENVY TouchSmart 17-j043cl Notebook PC
View 2 Replies
View Related
Apr 6, 2014
I have 2 RAID 1 mirrors (2 pairs of 2Tb discs) on an i7 870 on GA-P55A-UD7 (Gigabyte) motherboard under Win 7 64bit.
I have ordered a new desktop (i7 4771 on Asus Z87 DELUXE/DUAL MB) (hopefully with 8.1 on it (another thread))
When I get my new desktop will I be able to transfer the two RAID 1 mirrors from the Win7 desktop to the Windows 8.1 desktop and have them work properly?
View 9 Replies
View Related
Feb 24, 2014
I have 3 RAID systems;
1. 2x HDD's Internals, in Simple Mode.
2. 4x HDD's Externals, in Spanned Mode.
3. 3x HDD's Externals, in Spanned Mode.
( 2 & 3; In MediaSonic enclosure, eSata Cable with PCI-Express )
I want to format my PC with clean install,
the problem is that all these RAID's are SoftWare & the HDD's are DYNAMIC.
will i be able to use this RAID's normally after the format?
Or i need to break all RAID's, then make it again with the newly installed windows? & HOW?!
PS: my windows 8.1 Pro is on separate SSD.
View 9 Replies
View Related
Jul 6, 2014
So I recently just bought an SSD and it's installed in my ASUS G750JX laptop as the boot drive. I did a little research and found out about RAID 0. I did a bit of research and found out that if I set from AHCI to RAID 0, I'll have to reinstall Windows. Now here's the problem. My Windows copy is obviously OEM. Let's say I have set up the RAID 0 and I want to install Windows.
- Is there any way I can use the same product key that came with my laptop to install Windows 8?
- Where do I get the disc or iso for Windows 8/8.1 [Not the PRO version] that is legit? (I tried to Google for an ISO but all of them are for Windows 8.1 PRO
See I would buy Windows 8 again but it's expensive. Before you throw at me things like "Clone your OS to another HDD first", I want a fresh install.
On a side note, I am running Windows 8.1[Not the Pro version]
View 2 Replies
View Related
May 23, 2014
I had a HDD go bad, so I set up 2 250gb Drives as a raid 1 setup. Windows 8 worked great before HDD Failure, but now after re-installing 8.1, it only runs for about 5 min before I receive DPC_WATCHDOG_VIOLATION. Dump Files are included below.
[URL] .....
Also, I have 3 monitors attached. The main Monitor displays the error, while the right monitor remains at the desktop and the left monitor shows a distorted blue screen. (Not sure if it matters..)
View 1 Replies
View Related
Dec 7, 2012
I have a new HP Envy h8-1414 and have it pretty well set up the way I want it. It seems to be working out alright.
Now I would like to migrate the system to a Intel SSD. Under Win 7 on another machine the process was very easily done by using Intel's Migration software. That process did not have to deal with and EFI BIOS but under the new HP it will have to deal with it. Also, I hope it will migrate the Factory Recovery partition. (The Win 7 is a home brew so there was no factory recovery involved.)
Does Intel's Migration software will take care of both the EFT stuff as well as the factory recover? If not, will you recommend a process that will do so as foolproof as possible?
I thought of creating a system image of the spinner and using the Win 8 recovery disc to restore it to the new SSD. Will that work?
View 3 Replies
View Related
Jan 19, 2014
I just bought the HP Envy 17t-j100 Quad Edition with the 1TB hybrid drive and the 240GB SSD Upgrade Kit that you can get on the Customize and Buy page. I wanted to put the OS onto the SSD because I haul my laptop all over the countryside for work and it takes a beating and the SSD withstands that kind of treatment better. After a huge fiasco of trying to get mounting brackets and connecting cable that should come with the kit but don't, I finally got the thing physically installed in my second drive bay.
I tried using Acronis True Image to clone it over, as that was the cloning software that came with the SSD but apparently that version was incompatible with 8.1. So I bought the newer version, but apparently Acronis won't work if the drives are that different in size. I finally had a repair shop guy migrate it over for me but he had to enable Legacy booting to do it and now I have this obnoxious message in the lower right part of my screen:
"Windows 8.1
SecureBoot isn't configured correctly
Build 9600"
That is a minor annoyance and if I have to live with it, so be it. But I also find myself having difficulty downloading drivers from HP because now that I have a new SSD instead of the original hybrid drive, my specs no longer conform to the specs of my model of laptop and HP can't figure out which drivers are the right ones for my machine. I know I should have had the guy at the shop keep it and finish the job properly but I need my computer for my work and can't be without it overnight. My old laptop died and I'm limping along with this one as best I can until I get it up to speed.
The guy from the shop told me that I would have to disable Legacy booting if I wanted to get rid of that message. He also told me that to do that I would need to create a bootable disk and then re-install 8.1 after disabling Legacy booting on the SSD. This is the point at which my limited expertise fails me.
I am having trouble creating the bootable USB drive because when I try to download the file and enter my product key it says, "This product key cannot be used to install a retail version of WIndows 8.1." I take that to mean that my pre-installed 8.1 product key is not the same as the type of key needed for the download. So I'm stuck there.
My main question is this: Will it work to just do a full re-install using the existing 8.1 that was migrated from the hybrid drive to my SSD or will I end up screwed because I can't find the right drivers once I remove the few drivers the shop guy installed for me because I'm on a different type of drive than HP recognizes?
View 2 Replies
View Related
Oct 8, 2013
I migrated my hard drive using Paragon which was running Windows 8 a few days ago from my 500GB to my 3TB hard drive. It worked fine for a while however it's now been acting up recently. I noticed that the system reserved partition on my new hard disc (G: ) is only "Active, Primary Partition" and I still have a system reserved partition on my old hard disc (E: ) which is "System, Active, Primary Partition" so I'm guessing it's still somehow tied to my OS (even though I formatted my old hard disc as I want to set up a dual-boot system with Linux Mint), and the fact that whenever I start up my computer it says it's repairing E:.
What to do to make it so the system reserved G: partition is the "System, Active, Primary Partition" and how I can merge/format the E: and F: partitions on my old hard drive after?
I know the little mistake I made with the 3TB drive only being recognised as 2TB.
View 9 Replies
View Related
Feb 23, 2013
how to migrate my electronic database of my personal CD collection from my old Windows XP Home Edition computer to my new one, which runs on Windows 8. I originally downloaded the software in 2003 and it now contains details of my extensive classical CD collection. The original designer and licensor of Classic Collector (which is very much a one-man-band) is no longer able to service enquiries owing to illness. I understand it is now available as a free download, but am not sure how much use that is to me as I already have a database containing several hundred 'covers' (CDs or CD sets) and several thousand individual music items.
View 3 Replies
View Related
Feb 3, 2013
I just can't seem to get windows 8 to install/use the ahci controller - some specifics:
- new system
- clean windows 8 install (non-pro)
- one new ssd drive and one new hybrid drive, latest firmware flashed
- windows 8 installed on ssd (samsung 120gb)
- bios set to ahci+raid
- bios version current
- installed Windows 8 without pre-installing latest storage drivers during setup, ahci not recognized in device manager
- reinstalled Windows 8 using latest pre-installed drivers during setup, ahci still not recognized in device manager
Spent a lot of time researching this issue and none of the suggestions i've come across seem to work, including registry hacks. regardless of what i do Windows 8 just won't recognize my drives as ahci mode - ahci mode is setup in bios but Windows 8 still loads the ide drivers which can be seen in device manager under ata/atapi controllers. Why won't windows 8 recognize the bios ahci setting?
chipset - intel pch-c206
hp z1 server
latest bio update installed
cpu - e-1245
ssd (120gb) - operating system
hybrid drive (500gb) - storage
memory - 16gb
View 4 Replies
View Related
Jan 9, 2014
I am using Windows 8.1 x64. I am booting in IDE mode and I want to convert that into AHCI. I have read the following post-: Change from IDE to AHCI after installing Windows 8 - Super User
But has anyone converted Windows 8/8.1 to ACHI after installing ? Are there any problems after the conversion ?Microsoft has a patch for Windows 7/Vista but nothing for Windows 8/8.1.
The reason I want to do this is because I am going to install Debian Squeeze(Linux) and dual boot it with Windows. It seems Linux does not support SATA IDE but only supports AHCI.
View 2 Replies
View Related
Jan 15, 2014
i have a Lenovo Ideapad Z585 running Windows 8, secure boot, gpt paritioning and UEFI bios.The laptop comes with a factory shipped 1TB Sata drive which i want to replace with a Kingston V300 SDD 120GB drive.
I have followed this guide How to Migrate OS to new Hard disk.Ive run this in another desktop, it completes and i shut down, remove the destination and insert it into the laptop - power up and it blue screens with There has been an unexpected error message. Trying to access the recovery partition says it is damaged but looks like its almost going to load. Looking at the drive in EaseUS paritition master the paritions look a perfect copy apart from the proportional sizing.
AHCI is enabled in bios - i've tried EaseUS Backup clone, task was successfull but again blue screens but this time with a attached device cant be found.
One thing i wasnt sure about, the PC i done the cloning in has a RAID stripe setup but not sure if this effects it.Any one had success in cloning a GPT drive over to a SSD?
I cant do a fresh installation of windows 8 as i dont have recovery discs, nor does the onekey recovery software allow me to do so and id like to keep the recovery parition in tact really.
View 7 Replies
View Related
Jun 13, 2013
Question: How would you approach this migration?
I just bought a copy of Acronis True Image 2013 with Plus Pack. It appears that this is all I need as True Image will install the new motherboard drivers as part of the migration process. But do I stay with MBR or move to GPT?
Presently both Win7 (on a 120GB SSD drive) and Windows 8 (on a different 120GB SSD drive) are both MBR format. I don't want to start over from scratch. That's why I bought the Acronis 2013 with Plus Pack.
View 5 Replies
View Related
Jan 14, 2013
I just recently built a new Windows 8 machine. Since I knew I was going to be getting an SSD down the road, I planned ahead:
Nutshell, the C: drive, the boot drive, is at the end of the partition, sized to 220 DB, so I knew it would be smaller than the 240/256GB drive I knew I'd eventually be getting. The Users folder is on the D: drive, so the C: partition is only the OS and apps. Everything's dandy.
I found EasyBCD and used it to move the boot manager over into the C: partition, so theoretically that's all I need to move over to the new drive. So what I want to do is move the C: partition over to the SSD, have it stay C: once it's there, and then have it boot into that partition. (Note that I cannot disconnect the hard drive when it's time to reboot because that's where the Users folder lives and I don't want to break that.)
I keep running into problems with the "keeping it C" part. When I clone the drive over, the old drive stays as C: (as you would expect), and the new drive gets a new letter. Attempts to change those letters using DISKPART from the Win 8 install DVD have been either futile or disastrous.
I've been using the free version of Macrium as my cloning / imaging tool...is there a better free tool I should be using?
View 4 Replies
View Related
Jan 27, 2014
Until very recently i was running Windows 8 with a 240 GB Sandisk SSD as a primary and a 2 TB Western Digital Green HDD as a storage. I decided to set up a RAID 1 setup so i purchased a second 2 TB HDD and installed it.
My intent was to run windows 8 off the 240 SSD as a primary and have a RAID 1 setup for my 2TB HDDs.
I learnt that my data configuration was set to AHCI. I decided to do a complete clean install and change the sata configuration in BIOS to RAID.
After successfully creating a RAID volume using my 2TB HDDs i proceeded to install Windows off my primary. I am however having difficulties in that it will not allow me to install windows on either drive.
View 3 Replies
View Related
Jan 30, 2013
I have win 8 pro installed & two HDDs with two partions each , I want to migrate the boot partition to another partition on the second drive .
It would have been easier if i would have just cloned the complete drives but one of the partions on the 2nd drive has data which cannot be deleted .
So I have Drive
1 - Partitions C: ( boot partition ) & D:
Drive 2 - Partitions E: & F:
I want to remove Drive 1 from my PC so i want to copy C: to E: then remove drive 1 & boot from E:
I tried "Easeus todo backup" , did not work, it does not make the copy bootable , to make it bootale the whole drive has to be copied .
I tried making an image of C: using Windows 8 inbuilt backup feature then removed drive 1 , installed Windows 8 on E: then tried restoring the image of C: but i got some error.
View 9 Replies
View Related
Jul 30, 2014
my HP laptop keeps turning itself off. It doesn't shut down, just turns off. It isn't running out of charge according to the thing(cant think of what to call it) that shows me how much charge it has left, the charger does have to be plugged in for it to turn on again. It also doesn't seem to be overheating. No warning messages or anything.
When I load back it up again it takes a lot longer than usual, it's not updating.
For a bit more annoyance when it does load up Google Chrome wont start until I restart.
Not so bad if it breaks now as the warranty only has a few months left.
View 8 Replies
View Related
