Hardware Drivers :: Any Way To Read AHCI HDD From ATA Install?
Nov 6, 2013
So I switched over to the SATA setup via BIOS in attempt to improve my SSD performance. I knew I had to reinstall on the SSD but my I am not able to read or even format my second HDD that was also in AHCI. Is there any way to (would be awesome if) read, or at least format my drive so I can use it again? I tried disk management and other options within the OS and couldn't format.
it's an MSI 990xa gd-55 mobo. Which I am ashamed to even own because it sucks.
MSI USA ? Motherboard - 990XA-GD55
One day, I changed the configuration of IDE to AHCI through Windows registry and configuring the BIOS parameters. Today, I want to go back to IDE without reinstalling Windows. I do not know how to do.
i have recently bought an SSD. I have heard from a youtube video that changing the Sata controller from IDE to AHCI can give me better performance but i tried to enable this and it doesn't recognize the drive. The PC will not boot in AHCI mode which meant i have to switch to IDE again. I have tried booting from the Windows install DVD but it tells me that i cannot install Windows on this drive. Am i missing something?
The OS is installed while the mode was set for IDE, and afterward it was changed to AHCI. Now, the system does not boot. "Attempting repair" is displayed and the process does not advance.
Windows 8 is installed on a ssd and a hdd, and both exhibit the same symptom.
The system includes GA-970A-UD3, FX-6300, DDR3 1866 4GBx2, 1TB SATA3 and 120GB SATA3 SSD.
Currently using Onboard RAID1 which is just a pair of 1TB SATA drives that boots into windows 8.1. SATA BIOS mode is set to RAID.
I need want to switch the onboard SATA mode to AHCI so I can boot to SSD, instead.
I'm sure some have tried this: If you just clone the RAID partition as it sits on to the SSD, it will not boot the SSD when the SATA Bios mode is set to AHCI.
So, besides a bare-metal reinstall, how do move my Windows 8.1 installation on to the SSD so that when its all done the SSD will boot into windows and the SATA Bios is in AHCI mode? I'm not opposed to purchasing software like Macrium or Acronis if any of those can do the job.
It seems like anyone using onboard RAID would have run into this problem after purchasing an SSD.
Ever since switching to AHCI mode, I've noticed that my keyboard has issues with the volume wheel not working properly. Also after setting up the LED lighting on the keyboard and a few restarts later, I've notice that when restarting my system the keyboard LED, blue in this case, will automatically show up and when it does, and I use the del key to get into BIOS doesn't work. I have to move the the usb connection to a different port, restart and keyboard LED will be white. This time using the del key, I can get into my BIOS no problem. This never happened when I was using native IDE mode.
A couple of weeks ago, I cloned my HDD C drive to a new 250GB Samsung 840 EVO SSD.
After fitting the SSD in place of the old HDD, the system rebooted fine and worked well with a very noticeable increase in the speed at which Windows loaded.
However, Samsung's "Magician" software informed me that the drive was running in SATA mode and that better performance would be obtained by switching the Storage Configuration parameter to AHCI mode in the BIOS on my ASUS P7P55D Pro motherboard.
So, I tried this but Windows would not load. I didn't get a BSOD as such... I'd get the Windows 8 start-up logo with the spinning dots below for a while, then the screen would go blank, then a message would flash briefly on the screen saying something along the lines of "Windows has experienced a problem and was unable to start so your computer is being restarted" (not exact words as it's not on screen long enough for me to read) and my computer reboots. This startup/error/reboot loop is repeated until I enter the BIOS and switch Storage Configuration back to IDE whereupon all is back to normal.
Further research then revealed that I needed to tweak the registry so I did this but I still get the startup/error/reboot loop.
Next I tried booting into SAFE mode as described in this thread. It'll boot fine if I leave Storage Configuration set to IDE but not if I change it to AHCI. It just goes back to the same old startup/error/reboot loop and Windows makes no attempt to install any new drivers.
I know I could do a clean install of Windows but I don't really want to go down that route if I can possibly avoid it.
I strongly suspect that the motherboard's Intel(R) 5 Series/3400 Series SATA AHCI/RAID Controller does not have the right driver installed that would enable AHCI mode to work. Is there a way that I can force installation of an updated driver? Is there such a thing (device manager tells me the latest driver is installed)?
I can live with IDE mode as the computer boots considerably faster from the SSD and programs load much quicker too but not being able to use AHCI mode is bugging
I tried installing the 8.1 Intel SATA/RAID driver from the ASUS website P8Z68-V motherboard model, but when enabling AHCI in BIOS I'm getting blue screens which is making me think something isn't configured properly in the OS. How to properly enable this in 8.1 yet? I'd definitely like the extra speed out of my SSD
installing a reputable software app failed and now my c drive is read only and although i can use most of my original programs, i cannot change anything, cannot choose a restore point as it say the administrator (me!) has stopped me doing this.
I cannot start my acronis to get my latest backup (on external drive), yet i can access my email and other programs.
The windows system is actually on a small ssd drive for speed although my C drive is on my normal harddisk.
i get the fault code 0x800704b3 when trying to access programs such as Wise 365.
My Hyper drive manager will not work either.
I can copy and paste and am copying all of the files in My Documents to an external hard drive (where all my Acronis backups are.
I have a sinking feeling that the only option left to me is a complete reinstall somehow as all the options seem to be blocked to me (Restore, Refresh etc)
I was wondering with newer SSD's if it is correct or not that programs can read the temperature of an SSD.
Like you can with a HDD.
I am using a program called AIDA64 notice at times my two internal SSD's read 44c.
Two i have are:
Crucial MX100 CT512MX100SSD1 2.5" 512GB SATA III MLC Internal Solid State Drive
Crucial MX100 CT256MX100SSD1 2.5" 256GB SATA III MLC Internal Solid State Drive
Most say they do not get too hot or not really hot at all, due to no moving parts and less power consumed.
Never remember my HDD reaching past 37-38c
2.5" to 3.5" bracket i have fits 2 SSD's and makes them sit close to each other, one above the other in a 3.5" bay.Pretty open around it, i have two case fans, nothing else it getting too hot, but it is summer time here and i do notice a difference compared to winter with rest of the components.
I just installed Win 8 last night and everything seemed fine before I turned off the computer. Now, I'm a student and I work a lot from my USB/HD. I have both my usb and HD connected to the computer but the computer doesn't read them now.
I had to reinstall windows. I had a raid 0 with 2 drives, when I started widows the drive couldn't be accessed. so the only option was to convert to dynamic disk. I did that but still cant read or change drive letters. I am pretty sure my data is still on it. but how can I read this disk?
right now I am scanning it with easeUS data recovery and it looks like its finding files. any other way to read the drive?
My PC with Windows 8 Pro doesn't read any kind of discs. I first tried a movie then it reads, a little disc appears on the cursor which means that the disc is being read. But all of a sudden, it fails at the end and doesn't read the disc. Even a bootable disc, it just stays black with a blinking line then it fails to read it as well. No errors or messages, it just proceeds to the Windows 8 loading screen.
I have this external hard disk of 500Gb of Verbatim. Previously it was of NTFS format. Then I had converted it into Fat32 because I wanted to write stuff on it from MAC. I transferred movies, pictures, videos, songs, etc in it.
Now, I use Windows 8.1. I connect this hard disk. I hear the sound of it getting connected. But then I can't access the hard disk. As in my laptop doesn't read the hard disk. I read a few posts regarding converting a hard disk from FAT32 to NTFS wiithout losing the files. But I was not sure whether I have the same problem.
I want to transfer all the files in my hard disk to my laptop.
I have a SSD and tried to switch to AHCI without having to reinstall. A guide suggested i had to do to device managers and then select my IDE items, select manually install driver and install the driver for AHCI
Well now i can't boot windows 8 anymore. I get an error message before the loading is finished, and i don't even have the time to read it my computer will instantly reboot and do the same thing over and over again
Setting the BIOS to AHCI will just cause another error. Windows8 won't boot and will tell me i need to repair it.
Automatic repair from install CD isn't useful. I don't have any system restore point.
I just can't seem to get windows 8 to install/use the ahci controller - some specifics:
- new system - clean windows 8 install (non-pro) - one new ssd drive and one new hybrid drive, latest firmware flashed - windows 8 installed on ssd (samsung 120gb) - bios set to ahci+raid - bios version current - installed Windows 8 without pre-installing latest storage drivers during setup, ahci not recognized in device manager - reinstalled Windows 8 using latest pre-installed drivers during setup, ahci still not recognized in device manager
Spent a lot of time researching this issue and none of the suggestions i've come across seem to work, including registry hacks. regardless of what i do Windows 8 just won't recognize my drives as ahci mode - ahci mode is setup in bios but Windows 8 still loads the ide drivers which can be seen in device manager under ata/atapi controllers. Why won't windows 8 recognize the bios ahci setting?
chipset - intel pch-c206 hp z1 server latest bio update installed cpu - e-1245 ssd (120gb) - operating system hybrid drive (500gb) - storage memory - 16gb
I am using Windows 8.1 x64. I am booting in IDE mode and I want to convert that into AHCI. I have read the following post-: Change from IDE to AHCI after installing Windows 8 - Super User
But has anyone converted Windows 8/8.1 to ACHI after installing ? Are there any problems after the conversion ?Microsoft has a patch for Windows 7/Vista but nothing for Windows 8/8.1.
The reason I want to do this is because I am going to install Debian Squeeze(Linux) and dual boot it with Windows. It seems Linux does not support SATA IDE but only supports AHCI.
I have recently bought a ASUS X550LC Laptop in that. i was trying to install bluetooth drivers but it crashes frequently during the installation. i have tried a lot and i cant able 2 solve the problem.
Had drive problems with PC so got new SSD drives and a Hybrid drive.All new drives so did tortuous route install win7 - upgrade to win 8.0 all worked then started acting up. My tech support worked on it for 2 days and gave up said I should backup and do a clean install from start. So I did.
Not yet put any backup files on so only operating system and devices (printer, wireless keyboard/mouse, wireless headset and 3webcams ( One Pluscom and two PCline ) checked device manager and found cameras with yellow exclamation mark and checked properties and saw this webcam.JPG . Download, install and do a reboot and see what happens.
[URL]
I am obviously logged in as admin as I am the only user who Can use PC and checked permissions which are OK all users having full access.
My model is HP Pavilion Slimline s3760in Desktop PC
HP Pavilion Slimline s3760in Desktop PC Product Specifications -- In product specifications you can notice that my OS was shipped with Windows Vista Home Premium with Windows Media Center (32-bit) with Vista Service Pack 1
In NVidia website it has mentioned that all the oem model should download from manufacture like hp, dell website only.
IF you check driver update for this model for windows vista 32bit you will notice original driver like keyboard, nvidia, etc.
Driver - Original (5) Original Hauppauge WinTV HVR-1200 TV Tuner Driver 2008-11-18 , Version1.31.26252.0, 5.87M Original driver for the Hauppauge WinTV HVR-1200 TV tuner solutions. Original HP Multimedia Keyboard Driver 2008-11-14 , Version1.0.7.1, 6.09M Original driver for the HP multimedia keyboard solutions.
[Code] ......
So my queries is that i have recently installed windows 8.1 and i wanted these original files to be installed but dont know which one to pick from vista drivers or windows 7 drivers? but windows 7 drivers are latest when compare with vista. Or should I download nvidia drivers from nvidia website? and also same goes with realtek audio driver from realtek website?
I am unsure whether I should enable "Automatically get device drivers, apps, and info for new devices" when installing Windows 8 Pro?
What exactly will it do?
If I enable this, will Windows then automatically install software packages/drivers from the manufacturer, like for example the Logitech Setpoint software for their keyboards and mouse and similar software for other devices? I don't want or need that. Or will it behave like in Windows 7?
On my other PC with Windows 7 I see in Windows Update that there are a couple of optional updates, including that Logitech stuff, as well as some driver for a BenQ monitor I have and also nvidia video drivers. This kind of stuff I don't want or need installed automatically as important updates in Windows Update - so I am worried if enabling this automatic driver stuff in Windows 8 is different than Windows 7? Meaning that it will get installed secretly/automatically?
However, it's fine that Windows finds them so I can manually go and check if I want to install any of it.
The key is that the updates are optional in Windows 7, but I have seen a few people complain about Windows 8 installing stuff like video drivers and mouse drivers automatically.
When I tried to install lan drivers in my pc(dg41RQ mother board) through drivers cd, lan driver is not installing, it is getting failed for windows 8.1.
I have an Asus P8Z77-V Deluxe. It replaces a motherboard that failed. I have moved the Win 7 image over to the new board using a "restore to other hardware" feature in a backup program. It did not work properly. I am not able to get some drivers to install. For various (and sufficient) reasons I really really don't want to do a clean install. When I first booted, it would not even boot until I used Win PE to repair the boot. Various squirrely things are still wrong. Like not being able to see more than one hard drive. Occasional crashes for no obvious reason.
For an SATA controller when I run update driver or running the Intel INF setup program provided by Asus I get a message:
7 series/C216 SATA AHCI controller 1E02 Also This operation requires an interactive windows station.
I have just run the Intel update program and it says it can't identify a device an I need to contact the board manufacturer.
An alternative I am considering is to install a Win 8 update over the Win 7 telling Win 8 to retain my programs, settings, and data. But I am not sure this will get me where I want to go. My major question about that is will the Win 8 installation be clever enough to use all of the driver files from Asus that I have downloaded (and I point it to) rather than installing something like the incorrect ones currently installed?
So figured out my Windows 8 install was corrupt so I decided to do a fresh install of Windows 8 Pro 64-bit.
Formatted my drives and proceeded to install Windows 8 successfully. While installing all of my drivers every single one of them installed perfectly fine besides IntelRST.
It seems to time out every damn time. I tried to manually install it via device manager and it times out as well. I even reformatted and re installed Windows 8 still no go.
The crazy thing is when I try to manually install it via device manager it times out but the driver shows the correct date so I'm sort of at a loss right now.
Hardware ASUS Z77 Sabertooth Intel i7-3770k oc'd to 4.5GHz 2x Samsung 250GB in RAID 0 2x WD 1TB in RAID 1 32GB RAM Mushkin Enhanced Redline Links to the Intel Log: Log File
I have an older laptop TOSHIBA. According to Microsft is compatible with Windows 8 I also managed to install the new OS. But I need to install Windows 8 some older drivers (for example, Windows 7).
I tried all the different ways to install samsung usb driver but I couldn't. I installed samsung kies but didn't recognize the phone as well. i removed it and tried to download the update from windows and I got this message:
Now my Galaxy SII won't be recognized in windows 8. What should i do?
How to install inf/drivers which have no digital signature in Windows 8 ? I had tried to install kqemu-1.4.0pre1 and returned "Third part inf does not contain digital signature information". When I tried to run service which returned
C:Windowssystem32>net start kqemu System error 1275 has occurred.
