I have a new HP Envy h8-1414 and have it pretty well set up the way I want it. It seems to be working out alright.
Now I would like to migrate the system to a Intel SSD. Under Win 7 on another machine the process was very easily done by using Intel's Migration software. That process did not have to deal with and EFI BIOS but under the new HP it will have to deal with it. Also, I hope it will migrate the Factory Recovery partition. (The Win 7 is a home brew so there was no factory recovery involved.)
Does Intel's Migration software will take care of both the EFT stuff as well as the factory recover? If not, will you recommend a process that will do so as foolproof as possible?
I thought of creating a system image of the spinner and using the Win 8 recovery disc to restore it to the new SSD. Will that work?
I just bought the HP Envy 17t-j100 Quad Edition with the 1TB hybrid drive and the 240GB SSD Upgrade Kit that you can get on the Customize and Buy page. I wanted to put the OS onto the SSD because I haul my laptop all over the countryside for work and it takes a beating and the SSD withstands that kind of treatment better. After a huge fiasco of trying to get mounting brackets and connecting cable that should come with the kit but don't, I finally got the thing physically installed in my second drive bay.
I tried using Acronis True Image to clone it over, as that was the cloning software that came with the SSD but apparently that version was incompatible with 8.1. So I bought the newer version, but apparently Acronis won't work if the drives are that different in size. I finally had a repair shop guy migrate it over for me but he had to enable Legacy booting to do it and now I have this obnoxious message in the lower right part of my screen:
That is a minor annoyance and if I have to live with it, so be it. But I also find myself having difficulty downloading drivers from HP because now that I have a new SSD instead of the original hybrid drive, my specs no longer conform to the specs of my model of laptop and HP can't figure out which drivers are the right ones for my machine. I know I should have had the guy at the shop keep it and finish the job properly but I need my computer for my work and can't be without it overnight. My old laptop died and I'm limping along with this one as best I can until I get it up to speed.
The guy from the shop told me that I would have to disable Legacy booting if I wanted to get rid of that message. He also told me that to do that I would need to create a bootable disk and then re-install 8.1 after disabling Legacy booting on the SSD. This is the point at which my limited expertise fails me.
I am having trouble creating the bootable USB drive because when I try to download the file and enter my product key it says, "This product key cannot be used to install a retail version of WIndows 8.1." I take that to mean that my pre-installed 8.1 product key is not the same as the type of key needed for the download. So I'm stuck there.
My main question is this: Will it work to just do a full re-install using the existing 8.1 that was migrated from the hybrid drive to my SSD or will I end up screwed because I can't find the right drivers once I remove the few drivers the shop guy installed for me because I'm on a different type of drive than HP recognizes?
I migrated my hard drive using Paragon which was running Windows 8 a few days ago from my 500GB to my 3TB hard drive. It worked fine for a while however it's now been acting up recently. I noticed that the system reserved partition on my new hard disc (G: ) is only "Active, Primary Partition" and I still have a system reserved partition on my old hard disc (E: ) which is "System, Active, Primary Partition" so I'm guessing it's still somehow tied to my OS (even though I formatted my old hard disc as I want to set up a dual-boot system with Linux Mint), and the fact that whenever I start up my computer it says it's repairing E:.
What to do to make it so the system reserved G: partition is the "System, Active, Primary Partition" and how I can merge/format the E: and F: partitions on my old hard drive after?
I know the little mistake I made with the 3TB drive only being recognised as 2TB.
how to migrate my electronic database of my personal CD collection from my old Windows XP Home Edition computer to my new one, which runs on Windows 8. I originally downloaded the software in 2003 and it now contains details of my extensive classical CD collection. The original designer and licensor of Classic Collector (which is very much a one-man-band) is no longer able to service enquiries owing to illness. I understand it is now available as a free download, but am not sure how much use that is to me as I already have a database containing several hundred 'covers' (CDs or CD sets) and several thousand individual music items.
i have a Lenovo Ideapad Z585 running Windows 8, secure boot, gpt paritioning and UEFI bios.The laptop comes with a factory shipped 1TB Sata drive which i want to replace with a Kingston V300 SDD 120GB drive.
I have followed this guide How to Migrate OS to new Hard disk.Ive run this in another desktop, it completes and i shut down, remove the destination and insert it into the laptop - power up and it blue screens with There has been an unexpected error message. Trying to access the recovery partition says it is damaged but looks like its almost going to load. Looking at the drive in EaseUS paritition master the paritions look a perfect copy apart from the proportional sizing.
AHCI is enabled in bios - i've tried EaseUS Backup clone, task was successfull but again blue screens but this time with a attached device cant be found.
One thing i wasnt sure about, the PC i done the cloning in has a RAID stripe setup but not sure if this effects it.Any one had success in cloning a GPT drive over to a SSD?
I cant do a fresh installation of windows 8 as i dont have recovery discs, nor does the onekey recovery software allow me to do so and id like to keep the recovery parition in tact really.
Recently I've upgraded my toshiba laptop with w7 to Windows 8.1 (without keeping any settings), but I cant get my synaptics touchpad to work.
Windows automatically installed some drivers for the touchpad but it didnt work. Then I downloaded newest generic drivers from synaptics website but they wouldnt install - I get an "installation failed" error without any elaboration.
So I've installed synaptics driver that was provided for my laptop for win 7. It installed nicely, but the touchpad still doesnt work - disabling/enabling it in synaptics tab in mouse settings doesnt change anything.
I thought that maybe now the generic driver will install that I have an older synaptics version installed and not some random windows driver, but no, the installation still fails.
The story unfolds :P Next I downloaded toshiba synaprics driver for win 8.1 that was developed for some newer laptop model as mine is no longer supported. The installation went smoothly but the touchpad still doesnt work.....
Currently using Onboard RAID1 which is just a pair of 1TB SATA drives that boots into windows 8.1. SATA BIOS mode is set to RAID.
I need want to switch the onboard SATA mode to AHCI so I can boot to SSD, instead.
I'm sure some have tried this: If you just clone the RAID partition as it sits on to the SSD, it will not boot the SSD when the SATA Bios mode is set to AHCI.
So, besides a bare-metal reinstall, how do move my Windows 8.1 installation on to the SSD so that when its all done the SSD will boot into windows and the SATA Bios is in AHCI mode? I'm not opposed to purchasing software like Macrium or Acronis if any of those can do the job.
It seems like anyone using onboard RAID would have run into this problem after purchasing an SSD.
I just bought a copy of Acronis True Image 2013 with Plus Pack. It appears that this is all I need as True Image will install the new motherboard drivers as part of the migration process. But do I stay with MBR or move to GPT?
Presently both Win7 (on a 120GB SSD drive) and Windows 8 (on a different 120GB SSD drive) are both MBR format. I don't want to start over from scratch. That's why I bought the Acronis 2013 with Plus Pack.
I just recently built a new Windows 8 machine. Since I knew I was going to be getting an SSD down the road, I planned ahead:
Nutshell, the C: drive, the boot drive, is at the end of the partition, sized to 220 DB, so I knew it would be smaller than the 240/256GB drive I knew I'd eventually be getting. The Users folder is on the D: drive, so the C: partition is only the OS and apps. Everything's dandy.
I found EasyBCD and used it to move the boot manager over into the C: partition, so theoretically that's all I need to move over to the new drive. So what I want to do is move the C: partition over to the SSD, have it stay C: once it's there, and then have it boot into that partition. (Note that I cannot disconnect the hard drive when it's time to reboot because that's where the Users folder lives and I don't want to break that.)
I keep running into problems with the "keeping it C" part. When I clone the drive over, the old drive stays as C: (as you would expect), and the new drive gets a new letter. Attempts to change those letters using DISKPART from the Win 8 install DVD have been either futile or disastrous.
I've been using the free version of Macrium as my cloning / imaging tool...is there a better free tool I should be using?
I have win 8 pro installed & two HDDs with two partions each , I want to migrate the boot partition to another partition on the second drive .
It would have been easier if i would have just cloned the complete drives but one of the partions on the 2nd drive has data which cannot be deleted .
So I have Drive
1 - Partitions C: ( boot partition ) & D:
Drive 2 - Partitions E: & F:
I want to remove Drive 1 from my PC so i want to copy C: to E: then remove drive 1 & boot from E:
I tried "Easeus todo backup" , did not work, it does not make the copy bootable , to make it bootale the whole drive has to be copied .
I tried making an image of C: using Windows 8 inbuilt backup feature then removed drive 1 , installed Windows 8 on E: then tried restoring the image of C: but i got some error.
