Keeping RAID Systems After Format
Feb 24, 2014
I have 3 RAID systems;
1. 2x HDD's Internals, in Simple Mode.
2. 4x HDD's Externals, in Spanned Mode.
3. 3x HDD's Externals, in Spanned Mode.
( 2 & 3; In MediaSonic enclosure, eSata Cable with PCI-Express )
I want to format my PC with clean install,
the problem is that all these RAID's are SoftWare & the HDD's are DYNAMIC.
will i be able to use this RAID's normally after the format?
Or i need to break all RAID's, then make it again with the newly installed windows? & HOW?!
PS: my windows 8.1 Pro is on separate SSD.
View 9 Replies
ADVERTISEMENT
Jun 20, 2013
I have a second hard drive on my HP DV7 laptop. It's a 750GB Hitachi.
Last week I started getting a SMART event and it would ask if I wanted to check the disk. Now every time I start the computer, it's running chkdsk and found a bunch of bad clusters. Also Some of my directories are missing, yet the space available remains the same, so its not deleting the directories and freeing up the space.
I'm recovering the data tonight but I have a few questions:
1) My data recovery software has the option to skip bad directories. Should I do this? And if I do not skip this, will this simply transfer the errors to the hard drive that I'm recovering to.
2) If I clean and then reformat, will the disk be usable? Or should I just junk it and get a new one.
View 8 Replies
View Related
Apr 6, 2014
I have 2 RAID 1 mirrors (2 pairs of 2Tb discs) on an i7 870 on GA-P55A-UD7 (Gigabyte) motherboard under Win 7 64bit.
I have ordered a new desktop (i7 4771 on Asus Z87 DELUXE/DUAL MB) (hopefully with 8.1 on it (another thread))
When I get my new desktop will I be able to transfer the two RAID 1 mirrors from the Win7 desktop to the Windows 8.1 desktop and have them work properly?
View 9 Replies
View Related
Jul 6, 2014
So I recently just bought an SSD and it's installed in my ASUS G750JX laptop as the boot drive. I did a little research and found out about RAID 0. I did a bit of research and found out that if I set from AHCI to RAID 0, I'll have to reinstall Windows. Now here's the problem. My Windows copy is obviously OEM. Let's say I have set up the RAID 0 and I want to install Windows.
- Is there any way I can use the same product key that came with my laptop to install Windows 8?
- Where do I get the disc or iso for Windows 8/8.1 [Not the PRO version] that is legit? (I tried to Google for an ISO but all of them are for Windows 8.1 PRO
See I would buy Windows 8 again but it's expensive. Before you throw at me things like "Clone your OS to another HDD first", I want a fresh install.
On a side note, I am running Windows 8.1[Not the Pro version]
View 2 Replies
View Related
May 23, 2014
I had a HDD go bad, so I set up 2 250gb Drives as a raid 1 setup. Windows 8 worked great before HDD Failure, but now after re-installing 8.1, it only runs for about 5 min before I receive DPC_WATCHDOG_VIOLATION. Dump Files are included below.
[URL] .....
Also, I have 3 monitors attached. The main Monitor displays the error, while the right monitor remains at the desktop and the left monitor shows a distorted blue screen. (Not sure if it matters..)
View 1 Replies
View Related
Feb 15, 2013
Okay so, my father just recently bought a HP Pavilion Slimline s5-1435d PC that came preinstalled with windows 8. I am still using my old Acer aspire 4741g laptop which was preinstalled with windows 7. The problem now is that my father don't really like windows 8, he prefers windows 7. And i want to upgrade to windows 8. So what I want to ask if it is possible to like switch operating systems with him or something like that??? Which i means like i get his windows 8 and he gets my windows 7?
View 3 Replies
View Related
Nov 22, 2012
With UEFI BIOS,Windows 8 make my data HDD to RAM file systems during partitioning HDD and WIN 8 cannot recognize it after finishing Windows 8 installation and log in.
Is That Windows 8 bug or AMI UEFI BIOS's bug.
If the RAW is GPT's file systems format. The system HDD why is NTFS not RAW.
View 7 Replies
View Related
Sep 15, 2014
Currently using Onboard RAID1 which is just a pair of 1TB SATA drives that boots into windows 8.1. SATA BIOS mode is set to RAID.
I need want to switch the onboard SATA mode to AHCI so I can boot to SSD, instead.
I'm sure some have tried this: If you just clone the RAID partition as it sits on to the SSD, it will not boot the SSD when the SATA Bios mode is set to AHCI.
So, besides a bare-metal reinstall, how do move my Windows 8.1 installation on to the SSD so that when its all done the SSD will boot into windows and the SATA Bios is in AHCI mode? I'm not opposed to purchasing software like Macrium or Acronis if any of those can do the job.
It seems like anyone using onboard RAID would have run into this problem after purchasing an SSD.
View 6 Replies
View Related
May 26, 2014
I had to reinstall windows. I had a raid 0 with 2 drives, when I started widows the drive couldn't be accessed. so the only option was to convert to dynamic disk. I did that but still cant read or change drive letters. I am pretty sure my data is still on it. but how can I read this disk?
right now I am scanning it with easeUS data recovery and it looks like its finding files. any other way to read the drive?
raid was made with the bios
View 1 Replies
View Related
Feb 3, 2013
How to get older O/S's like Windows 95, 98 and ME running on VirtualBox on Windows 8, I used to be able to run all Operating Systems when I had my Vista set up. Strangely I can install and run DOS and Win 3.1 but not Win 95, Win 98 and Win ME. Anything from XP works fine.
View 4 Replies
View Related
Aug 26, 2013
I have 4gb of ram in my desktop computer and have noticed that when I am on the internet, listening to music in the background and the mail app is open. I am using about 40% of ram, which seems a lot.
how much ram should someone have when using windows 8 64bit?
how much ram do you have in your Windows 8 or 8.1 computer?
my laptop has 6gb of ram.
View 9 Replies
View Related
Jul 20, 2014
I currently own but don't have installed (although I did try installing on friday july 18 2014) a lsi megaraid 9341-4i raid controller. When I had it installed, I disabled the intel rst and used my marvell secondary controller for my optical drive putting my two ssd's I wanted to raid on the lsi controller. I also switched all of my storage settings for windows 8 to legacy and not UEFI in windows since the controller can only be seen by the motherboard in legacy mode. After that, I configured the lsi bios to create a raid 0 on the ssd's and proceeded to install windows 8.1 64 bit. When I get to the point of a fresh install of windows and it asks me to load a driver, I do and it finds the 9341-4i and installs the driver. However, when the driver is done installing, there is no raid array to be found. I redid the raid array with full initialization and still no dice. My question is: why is windows not seeing any raid array after the driver successfully installs. I am using the most current from LSI's website windows 8.1 64 bit driver for the card too.
View 1 Replies
View Related
Apr 30, 2014
I did a very successful overclock, taking my processor from 3.3 Ghz to 4.7 Ghz. I can verify that in CPU-Z but it's not showing up in Windows Systems properties. What do I have to do for Windows to recognize the overclock?
View 9 Replies
View Related
May 6, 2013
test the Refs file system -- it won't yet be available on the boot system but will be on other volumes.
This will mean a change in your backup strategy if you back up disks by Imaging partitions. It will be a while yet before the standard backup vendors build this new file system into their backups - but whatever the change of data format in the partition layout you should still always be able to backup if you select "Backup by SECTOR" mode - as this mode simply copies byte for byte exactly what is on the disk without regard to data organisation whatever - it's a pure physical address sector by sector copy. It will probably take longer but it should always work.
(Although I'll be running this on a VM which can be backed up in other ways - I want to try the actual sector by sector backup from the Guest machine).
In theory though as most backup solutions are Linux based any sort of Windows file systems are just DATA as far as Linux itself is concerned - however sometimes these utilities do a bit of data compression and optimisation which requires knowing details of the SOURCE file system - usually FAT / FAT32 / NTFS. This could cause problems with the new Refs file system so I'd go for the physical sector by sector dump.
In any case while I'm sure we are all waiting to test the new file system - don't rely on it on any machine until your BACKUP and RESTORE strategy works.
View 7 Replies
View Related
Jan 20, 2014
I have an HP Envy with a recovery partition. I did indeed create a dedicated USB drive that copied the recovery partition from the partition on the hard drive that shipped with the unit.
I wanted to create a restore registry type of system repair disk as you could in Windows 7. However even though I read that the option should appear in the Recovery Options that says: Create a Systems Repair Disk with a CD or DVD (see System Repair Disc - Create in Windows 8), that option never appears.
While I do have Acronis as a backup I would like a quick bootable CD/DVD that offers a registry restore option. But perhaps that is what the recovery partition is for and when the time comes it will offer me that option, not sure (????).
Or may be there is a separate .iso I can downlaod and burn like I did for Win 7 32 bit and 64 bit.
View 5 Replies
View Related
Feb 18, 2014
For the past few weeks I have been getting this weird occurrence every time I try to install & update my Windows 8.1 64x-based System. No matter what update it is (except for the security updates) I get a black screen whenever i reset my computer and log back in. The mouse just shows up periodically and seems to be loading something; based on the fact that the loading cursor is being shown. I've waited hours before and nothing shows up. Only way to get my computer back to working order is by loading a system restore point.
P.S. I should also note that a white computer icon shows on the bottom left of my screen after updating as well. It comes and goes just like my cursor.
View 9 Replies
View Related
Jan 24, 2014
Does Microsoft provide any official channels for obtaining vanilla Windows 8 media without the OEM bloatware, the way they did for Windows 7?
View 9 Replies
View Related
Nov 10, 2012
I have two monitors. The desktop is always showing on the second monitor. If I have the start screen on the main monitor and click on the desktop on the second monitor, the main monitor switches to desktop. Is there anyway to keep the start screen on the main monitor in this situation?
View 9 Replies
View Related
Nov 2, 2013
Upgraded from 8 to 8.1 about a 2 weeks ago. Noticed about a week later that my nightly backup stopped running from the time 8.1 went in. Something stuck 2 new lines of code in the .xml for the task and also changed the run-userid. My admin userid got changed to a MS admin userid. I removed the two lines of code and changed the run-userid back to the correct one and now the backup runs OK. Then I noticed that it wasn't keeping task history. Next I noticed that no tasks were keeping history at all! And I'm unable to turn history on. It said it was on, I turned it off, turned it back on again. Still no history.
View 2 Replies
View Related
Jan 4, 2014
I am thinking about upgrading my PC from windows 7 to the newer 8.1 Pro when i buy a new SSD drive.
I am concerned that if I upgrade; I may not lose my files, but will i lose the programs already installed on my HDD?
I will load the new OS on my SSD with the HDD disconnected and then connect my HDD once installed, so i have my files etc.
Once I then connect my HDD, will I still be able to acces the programs installed on it?
And also, how would i then delete windows 7 off of the HDD? I am going to invest in an external HDD for a secondary back up and
Trasnferring data - so i could copy the files to there, wipe the Internal HDD and copy the files back.
View 9 Replies
View Related
May 14, 2013
Using Windows 8 Enterprise 64 bit, I have noticed that the full name of a local account (set with the net users "<username>" /fullname:"<full name>" command) is deleted whenever I switch from a Microsoft account to the local account associated with it.
So, how do I have to prevent this?
View 4 Replies
View Related
Sep 25, 2013
I am having trouble trying to find out how to keep adobe file showing on top of program in use.
As an example, I use an on line portal for my work and when I click on the program button to view an invoice it opens in an adobe file but then stays behind the program screen, I then have to go to the task bar to bring it to the front so it can be printed.
View 2 Replies
View Related
Jan 10, 2013
I'm running a Win 8 Pro x64 box, with Windows on C: and most of my Applications on D:
Is there any way to reinstall windows to C: without breaking my programs on D: ? I mean, a lot of the stuff will still work without any special tricks, but the things with hundreds of hard to find registry entries concern me.
Could I possibly reinstall to C: then run a repair installation for all the programs that reside on D:?
View 2 Replies
View Related
Jun 10, 2014
Ever since I upgraded from 7 to 8.1 the laptop has been progressively getting worse at keeping login details fort eh different sites I use regularly (like this one).
It is getting to be very very irritating to have to re enter my login detail when accessing forums Ebay etc etc... Have made sure I have saved cookies for the sites with CCleaner , made sure I have ticked remember this login and the site's remember this password but the problem like I said is getting beyond a joke.
I never had this problem with 7 and along with some of the other little niggles of 8.1 I am seriously thinking of reverting back to 7 although it does run slower.
View 9 Replies
View Related
Mar 15, 2012
Is there anyway to enable Snap on Windows 8 Consumer Preview on systems with resolutions lower than 1376x768? My laptop has a resolution of 1280x800 and I'd love to be able to use Snap on it.
View 9 Replies
View Related
Oct 27, 2013
Is it possible to repair or reinstall windows 8 pro while keeping the desktop app using the windows 8 installation disk and if so any link to a site that explain how to do it.
View 6 Replies
View Related
Jan 11, 2013
I want to upgrade from Windows 7 64 bit Home edition - To Windows 8 64 bit Home Edition.
I currently have my windows 7 installation on drive C (64GB SSD)
My user profiles, Data and programmes are stored on Drive E ( 1TB HDD )
If i use the windows 8 upgrade option - What will happen?.
View 8 Replies
View Related
Jan 14, 2013
How to clean up the windows containing hard drive from everything but the system files, because I upgraded my windows and not installed it to a clean hard drive. I have a lot of unneeded files. How to do it, without reinstalling windows.
View 3 Replies
View Related
Jan 27, 2014
Until very recently i was running Windows 8 with a 240 GB Sandisk SSD as a primary and a 2 TB Western Digital Green HDD as a storage. I decided to set up a RAID 1 setup so i purchased a second 2 TB HDD and installed it.
My intent was to run windows 8 off the 240 SSD as a primary and have a RAID 1 setup for my 2TB HDDs.
I learnt that my data configuration was set to AHCI. I decided to do a complete clean install and change the sata configuration in BIOS to RAID.
After successfully creating a RAID volume using my 2TB HDDs i proceeded to install Windows off my primary. I am however having difficulties in that it will not allow me to install windows on either drive.
View 3 Replies
View Related
Feb 12, 2013
I am currently running windows 8 64bit OS. I have a windows 7 32bit .iso file. I want to install the windows 7 32 bit while keeping the windows 8 64bit too.
View 7 Replies
View Related
Jul 7, 2013
I am using windows 8 on an HP desktop computer. I created 2 users (same computer). What I would like to do is have both users have the same desktop files and start menu between the two. For example the first one I created has a bunch of folders I put on the desktop recovered from my old computer, but when I log on with the other account they are not there. I also installed ms office on my computer with the first user- but it is not available to the other one.
Is there a way to link these 2 so I can still have different logins but access the same files?
View 2 Replies
View Related
