I have a Lite-On iHAS124-04 DVD drive that is not detected by windows 8.
The same system also has winXP and win7, which detect the drive.
The interesting part is the drive was used to install windows 8.
Why is windows 8 not detecting the drive?
I know my dvd drive was working a few weeks ago cause i used it to load up shogun 2 total war. My bios recognizes my driver but i dont see it any were in my device manager. BTW i was running windows 7 and had no issues with my dvd driver.
Update i click show hidden devices and i see my dvd but I can't find it anywhere when I look in my computer and when I put a disk in it doesn't boot up the cd or anything. I also asked it to check for updates but it says i have the latest updates for the drive and the device is working properly.
When I look the control panel the CD/DVD does not appears, but in the setup you can see that the DVD is working. Before I had win 7 and it work well.
View 1 Replies View RelatedMy setup for hard drives is a 64GB Crucial M4 SSD drive which I have Windows 8 booting from and an additional two drives (3TB Samsung for media) (1TB Samsung for programs).
I boot into Windows fine, and can run everything but after a certain amount of time (it seems very arbitrary and happens randomly) windows will slow to a crawl, lock up basically, reboot and then take me to bios screen where it doesn't even detect my boot drive anymore. To fix this I have to press the power button the tower and turn it back on in which case it boots back into windows. Then the process of locking up will occur again.
I've tried automatic repair from the Windows 8 screen which didn't result in any fix. I'm not sure how to proceed.
I just upgraded my Dell to windows 8 because I just recently bought my computer and at the time windows 8 was not out yet. I've upgraded my computer and I have no DVD/CD drive detected. I cannot use my CD/DVD drive on my computer at all. Nothing is showing up, what's up with that? This is the drive that came with my computer so why can't I use it? I put a CD/DVD into it and nothing happens. I go into my computer and there is absolutely no CD/DVD drive detected. What do I do now? I need my CD/DVD drive to work. What I can do to make it work? Again, this is a new computer Inspirion 660S now running windows 8.
View 2 Replies View RelatedMy cd/dvd drive is not being detected by my laptop. It is getting power but is not being detected. I tried the cd and hardware Microsoft fix-its and the hardware troubleshooter. Nothing works
View 8 Replies View RelatedI have an Asus x202e with I3, Windows 8 64 Bits. The defect is that the battery does not detect. Here's what I did: I disconnected the battery, I pressed the power button 30 seconds and not fixed. I reset BIOS F2, F9 and F10 and again not repaired. I uninstalled the Microsoft ACPI method battery and nothing. Do you think that a BIOS update will fix the fault? Mention that no longer turn on the battery.
View 6 Replies View Relatedit appears that windows cannot recognize my dvd drive after i used the option in the general menu to remove everything and reinstall windows,
When I check it in the device manager, it reports the dvd drive as hidden, and need to connect it to solve the problem, but i am pretty positive the dvd drive is connected since i can press the button and the tray will eject (and if i insert a disk i can hear it spinning), check the two attached images for this,
i have tried everything, like updating the firmware (it only worked once when the dvd drive was detected, for otherwise the update app would just request you to connect the drive to update it), it didn't work (in this case, i can see it in windows explorer, but cannot push the button to eject the disk tray), use the reg. fix found on the internet, resetting windows again (after the first reset, the dvd drive can be detected but i cannot burn an iso disk, so i reset it again, took about 20 minutes, now the drive is just simply not visible in explorer), none of them worked,
the laptop is samsung series 3, this one, NP355V5C - OVERVIEW | SAMSUNG
it used to have this problem (dvd not detected, or push button not responding) before, but usually solves on its own after an reboot, unlike this time which is completely screwed up and i am at my wits end,
No USB device seems to be getting detected on my machine when I plug in a flash drive or an external hdd I get the distinctive sound from my speakers that an USB device is plugged in but nothing is showing up in "My Computer". I went through the event logs and found that Windows is failing to load the USB device (check image in attachment logs.jpeg). Recently I installed iTunes, so I though it might be causing this problem but I uninstalled it even then the problem persists. I don't want to format my machine just because of this small problem. Is this a driver conflict ? How do I find out why windows is all of a sudden failing to load the USB devices ? I have uploaded a copy of the saved logs detailing this failure(logs.zip).
View 6 Replies View RelatedI run Windows in the following configuration:
I have an SSD and a normal HDD. The Windows system itself runs on the SSD for faster boot-up, and all my user data is stored on the HDD. I recently installed Linux as a dual boot option, but due to issues with UEFI and Legacy BIOS settings, I decided to uninstall my Linux. My Linux was similarly configured, with /boot residing on the SSD and the rest of it residing on an ext4-formatted partition on my HDD.
I uninstalled Linux using the boot-repair livedisc, and I can boot just fine into Windows 8.1. However, now my Windows Data partition on the HDD cannot be accessed. On boot, it doesn't even mount, and links to my Downloads or Documents folders are broken.
The Disk Management tool lists the Data partition as an EFI System Partition, when it was previously just a normal Primary NTFS partition. GParted detects the partition as an NTFS one. DiskPart also indicates the partition is hidden. Mounting the partition works fine using DiskPart but I cannot access it as it throws an access denied error, and says I do not have permission to access the drive. I have tried changing the security options in the security tab to give me full control, but to no avail. I can use CMD to access it though, and view things, but I cannot seem to move or copy data out of it. I have tried using the convert utility in CMD to convert the EFI partition to NTFS (EFI is FAT32, IIRC) but it says that the partition is already NTFS.
How can I fix this or at least enter the partition and backup my data before performing a format and restore? What data should I provide to get proper support?
Ok, after playing around a bit with the new 8.1 some hardware issues come into my way: My Soundblaster X-FI didn't work anymore, no new driver provided by Creative Labs - replaced by working sound onboard.
But now my Sony Cybershot DSC-W70 camera isn't detected anymore, no drive letter is assigned and since I have no cardreader I can't access the pics. Troubleshooting says the problem can not be fixed. Sony doesn't provide particular drivers for it and reinstalling the Intel ICH9 driver didn't work. Under Windows 8 it worked like a charm, 8.1 seems not to like much of my hardware.
i have just installed windows 8.1 64Bit on my pc which was originally running windows 7 64Bit I have 2 internal backup drives in addition to my normal boot drive Both these drives have data and worked perfect in Windows 7 but in Windows 8.1 only one shows up When i try to access the one I can see it says drive not accessible Access denied It also shows used space and free space as zero bytes When i know it is at least half full.
Its a 2 terabyte drive same as i the one i cannot see at all I have uninstalled both drives reinstalled them updated every driver possible I have windows 8.1 on a slide in drive as windows 7 When i slide Windows 7 back into the same machine both drives show up no problem.
Its an ASUS M4A785TD-V EVO Motherboard I am begining to wonder would a Bios update if there still is one available
As this motherboard is getting on a bit now.
Since upgrading my HP DV6T7000-CTO from Windows 7 to Win 8 and now 8.1I have had an intermittent issue where the my wifi/bluetooth adapter is detected, until a restart, and then afterwards, is no longer detected. I have a Intel centrino wireless N 2230 which is both wifi and bluetooth. I cannot connect to wifi, nor is the bluetooth detected. Additionally, the wifi-radio button on my laptop, will not turn on (red is off, white is on). Sometimes I can temporarily fix the issue by shutting down,disconnecting the adapter from my laptop, reseating it, and then rebooting. This does not always work though.
I have tried the latest drivers from Intel as well as tried removing those and just installing whatever Windows update thinks is best. I have also updated the Bios to the latest, but to no avail. I have even replaced the adapter with a new adapter but the same model and that did not fix the issue either.
I get a black screen after the loading screen when I boot up my computer. To fix this problem, I decided to do a dirty install, but I stumbled upon a problem. I have 2 Crucial 64GB SSDs that I put together as one, making my C: Disk, but I didn't see it in the Volume List. I only see what was Drive D:, my 1TB Seagate HDD, which, supposedly, took my SSDs' place as Drive C:.
I've unplugged the SSDs and booted up with only one plugged in, and made the Primary Boot Device "Removable Disk", but when I boot up, I get an error message saying "BOOTMGR is missing". The same thing happened when I did the same with the other SSD. It can be deduced that both of the SSDs have to work together as a whole to function.
Then, I unplugged the 1TB HDD and tried again. When I did a chkdsk for Drive C:, I got a message saying, "The system cannot find the drive specified". From this, it is obvious that the 2 SSDs (which are the actual C: Drives) aren't being detected by my computer, but the 1TB (Drive D: ) is being detected.
After uncovering this problem, I think this may be the fault that is giving me the black screen after boot.
I'm booting off my SSD which is drive C: and I have games and programs on an extra hard drive which was origanally drive H: but after a restart it switched to I: and when I go into Disk Management to change it Drive H: isn't there.
View 3 Replies View RelatedWhen I go to Computer Management my main (OS) drive shows as "Disk 1" and my 2nd internal data drive shows as "Disk 0". Should I switch the SATA cables so that the main drive will show as "Disk 0 and the 2nd internal drive as "Disk 1"?
View 5 Replies View RelatedI have windows 8.1 and am trying to do a refresh as I've had some problems. But I keep getting a message that says, "The drive where windows are installed is locked. Unlock the drive and try again." I then did a scan using "SFC/SCANNOW" When it was finished it said that it found some corrupt files but could not fix some of them. So the question is: What is a locked drive and how do you unlock it?
View 9 Replies View RelatedI have just bought a 4TB external USB 3.0 hard drive. The plan is to copy all of the data from my current internal 2TB drive to the 4TB, then I'm going to crack the case of the external hard drive open, take the drive out, and put it in my PC to replace the 2TB drive that's in there now (which I know will void the warranty). This isn't going to be a boot drive as I have an SSD for that.
I had read that Windows does not support large drives of this size and that it would show up as 2 partitions, so I was prepared to convert the drive to GPT in order to have 1 large partition. However, I connected the drive up to my Windows 8.1 machine and it shows as 1 large partition of 3.63TB, which is about what I expected.
Does this mean I don't have to convert the drive after all? Can I do what I'm planning to do and everything will work fine? Or do I need to convert it to GPT before I copy all of my data over and if so, how do I do that exactly?
I have a Samsung 530U3C laptop with a 500 GB HDD and an internal 24 GB SanDisk SSD. For some reason, the SSD is suddenly invisible to my system. It does not show up in Disk Management, it does not show up in DiskPart and it does not show up in Device Manager. Nowhere to be seen.
The BIOS has never displayed the SSD drive, so I can't see it there either. I don't know if it's connected with SATA or PCIe. All I know is that it's built in somewhere, and I don't see it if I open the laptop case. I also know that it's not a HDD/SSD hybrid.
However, if I boot up from a recovery USB and start a command prompt, I am able to see the SSD drive in DiskPart. But if I do the same after booting the OS, it's not visible.
Here's some details:
I've installed ExpressCache and Intel Rapid Start Tech to work with the SSD. This is what I did to the SSD:
Cleaned the drive with DiskPartCreate partition msr size=6200 (partition for Intel Rapid Start, 6 GB RAM)Set the partition id=84 (hibernation partition)Installed ExpressCache, which automatically created a partition of the remaining unallocated space.
This setup worked fine for a few days, but somehow the SSD drive is now invisible.
i have windows 8.1 and a Logitech k810 keyboard.I know that the keyboard can not access bios (because Bluetooth drivers do not start until windows boots). All i want to do is to make windows not freeze with that message that last 10 seconds before it resumes normal boot. After windows resumes normal boot the keyboard works just fine no problems i can log in etc..
To be even more clear I do not want to make windows load its Bluetooth driver faster or sooner than it normal does. All i want is for that message to not appear and windows go on its way booting without telling me and freezing on the no keyboard found message. How do i bypass that keyboard check? How do i make windows ignore it if i cant bypass so it wont display the message ?
I reset windows 8 on my alienware m15x for a fresh restart but it was taking too long and got stuck a 30% so I held down the power button. Next thing It says No Operating system detected.
View 9 Replies View RelatedI got a problem in Windows 8.1 which doesn't detect the integrated webcam. It worked fine the last week but today it just wont start. My laptop is a DELL Inspiron 14R 5437.
I already reinstalled the Chipset with no luck. Also, opened Device Manager but there was no "imaging devices" label. Did an unistall of USB Root Hub, then restarted, but nothing. Checked BIOS but dont know where to really enable/disable.
Build-in app Camera in windows 8.1 shows "to get started connect a camera". Skype displays "Skype couldn't find a webcam. With a webcam, you can make video calls..."
DVD drive not recognize by windows-8 after update
i installed WINDOWS-8 RP 64bit for trail on DG41RQ mobo (as well as on other PC (DG31PR) where there is no problem).
all was well till i updated the intel chipset driver (Intel Chipset Device Software version 9.1.2.1008)
and the BIOS version (to RQG4110H.86A.0017.EB)
now the system doesn't recognize my LG DVD drive (HL-DT-ST DVD-RAM GH22NP20) , (also in device manger and also in SAFE MODE) my BIOS dose recognize it and i CAN boot a live Win-XP from it.
i tried to roll back the IDE intel controllers drivers, but no change.
i have an IDE HDD as master, and the DVD Drive as SLAVE (recognized as such by BIOS).
my UEFI is desabled in BIOS (i don't know what it is actually).
(i have Activation Key (PRO) but i want to make sure all is well before activation)
How I can create a new hard drive without using space on the windows c: drive ...
View 9 Replies View RelatedI have a Samsung SE-218 External DVD drive, and I cannot seem to access it in Windows 8.1 (though I have not had a chance to try it on any other computers yet, so there is always the possibility that something is wrong with the drive). Whenever I plug it in the light comes on and it will spin the disc for a bit, but nothing shows up in File Explorer or in Device Manager.
I've tried the command prompt command noted in this thread with no luck:
How to make empty ODD show?
HP Envy dv7, Windows 8
Seagate 2TB drive mounted in a Thermaltake, Max 5 enclosure. The drive does not show in Windows 8. Does show when running Disk Management (diskmgmt.msc) but shows as "Unallocated" without a drive letter. If run the Seagate drive tools, it shows up as unallocated, with drive letter "C". But there is obviously already a drive "C".
Disk Management does not present a means by which to assign a drive letter
Ever since I upgraded to Windows 8.1 (the day it came out) iv had this random drive listed in the disk optimizer thing. I just let it go but i'm pretty sure there's a way to remove it. Here's a pic of what it looks like: [URL] .....
View 9 Replies View Relateda friend of mine recently brought me a notebook,Medion AKOYA 99380(s6214t). After booting and using notebook for some time,computer reported a Hard Drive error.It said:"Windows detected a hard disk problem. Back up your files immediately to prevent information loss, and then contact computer manufacturer to determine if you need to repair or replace the disk."
The HDD is pretty new and it didn't seem to have any hardware issues. However,I did a clean instal of Windows 8.1 on the notebook(normally I installed Windows on the 64GB SD Card located in the "tablet" part of the notebook,so that way a person using it can use it as a tablet,too). Everything seemed to work fine, no HDD errors from Windows etc.,but then I opened My Computer and second Hard Drive wasn't there.I thought that it's a Drive Letter problem so I went into Disk Management however it did not solve the issue.
Then I tried everything(re-formatting,changing from NTFS to other formats etc.) but it did not seem to work.But all of sudden,after doing something, I don't really remember what I did that made the Computer see it, but it finally worked,so I just started testing everything. And after I used it as a tablet only for a while,I plugged that part in the notebook again and then Windows gave me an option to Update and Restart. I was a bit afraid of how it will turn out,so I wanted to shut down and turn on for a couple of times before updating, just to see if it will cause any issues. When I was sure that it worked perfect before the update, I clicked the option to update.
After the update was finished,Windows ran extremely slow and it detected my second HDD, however not the way it should.It only said "Local Disk (D: ) but I could not access and it didn't show how much memory on it was used. I re-assigned a letter to it after a format,but it did not work. Then I shut down the notebook,pull the second hard drive out,connect it to computer with usb so windows sees it as an external hard drive,and bam,everything worked. I don't think that the HDD is the problem,nor the SATA connectors,it's most likely that the motherboards driver need an update. However,when I checked for it's name,it said "Medion AKOYA s6124t". I tried all the downloads from Medion's page,but no succes in finding a proper driver.
At the moment I dual boot Windows 7 and Windows 8. I have just added Media Centre to 8 (yes I've got my key = 10days) and all went smoothly . . . until the dreaded alert 'TV Tuner not Detected' !! Of course it works perfectly on the Win7 partition, but is there any way for it to be recognized in the Windows 8 Partition? Or is the only way to eventually lose my Windows 7 and rely totally on Windows 8. Presumably the TV Tuner Card would then be detected. TV Tuner card is AVerMedia A336 MiniCard Hybrid DVB-T and driver up to date.
View 9 Replies View RelatedNeed to rebooted everytime after I had started windows 8 Pro. What happened on my Wins 8 pro.
View 9 Replies View RelatedI'm currently using a Dell Inspiron 3520 laptop with Windows 8 on it. I have an external hard drive from a Windows 7 desktop. It recognizes the external hdd right away and I can access it but I can't figure out how to boot Windows 7 as the primary. I've tried changing boot order in bios but I've had no luck as it still boots Windows 8 first. Is there a way to use the Windows 7 as the primary drive ? Even a way to temporarly turn off the Windows 8 hard drive will work. I just need to access the Windows 7 hard drive without having to navigate through program files to have to open something.
View 9 Replies View Related