Windows 8 Freeze / Lockout - Boot Drive Not Detected On Restart
May 28, 2013
My setup for hard drives is a 64GB Crucial M4 SSD drive which I have Windows 8 booting from and an additional two drives (3TB Samsung for media) (1TB Samsung for programs).
I boot into Windows fine, and can run everything but after a certain amount of time (it seems very arbitrary and happens randomly) windows will slow to a crawl, lock up basically, reboot and then take me to bios screen where it doesn't even detect my boot drive anymore. To fix this I have to press the power button the tower and turn it back on in which case it boots back into windows. Then the process of locking up will occur again.
I've tried automatic repair from the Windows 8 screen which didn't result in any fix. I'm not sure how to proceed.
i have windows 8.1 and a Logitech k810 keyboard.I know that the keyboard can not access bios (because Bluetooth drivers do not start until windows boots). All i want to do is to make windows not freeze with that message that last 10 seconds before it resumes normal boot. After windows resumes normal boot the keyboard works just fine no problems i can log in etc..
To be even more clear I do not want to make windows load its Bluetooth driver faster or sooner than it normal does. All i want is for that message to not appear and windows go on its way booting without telling me and freezing on the no keyboard found message. How do i bypass that keyboard check? How do i make windows ignore it if i cant bypass so it wont display the message ?
I know my dvd drive was working a few weeks ago cause i used it to load up shogun 2 total war. My bios recognizes my driver but i dont see it any were in my device manager. BTW i was running windows 7 and had no issues with my dvd driver.
Update i click show hidden devices and i see my dvd but I can't find it anywhere when I look in my computer and when I put a disk in it doesn't boot up the cd or anything. I also asked it to check for updates but it says i have the latest updates for the drive and the device is working properly.
I just upgraded my Dell to windows 8 because I just recently bought my computer and at the time windows 8 was not out yet. I've upgraded my computer and I have no DVD/CD drive detected. I cannot use my CD/DVD drive on my computer at all. Nothing is showing up, what's up with that? This is the drive that came with my computer so why can't I use it? I put a CD/DVD into it and nothing happens. I go into my computer and there is absolutely no CD/DVD drive detected. What do I do now? I need my CD/DVD drive to work. What I can do to make it work? Again, this is a new computer Inspirion 660S now running windows 8.
My cd/dvd drive is not being detected by my laptop. It is getting power but is not being detected. I tried the cd and hardware Microsoft fix-its and the hardware troubleshooter. Nothing works
I`ve got HP Envy Phoenix H9-1400ec with Windows 8 64bit. Can`t boot it, I`ve tried restarting and all that during the scanning and repairing process, but it`s just frozen on 1% for quite a few hours already(I just let it run in case some miracle happens...)
I have a Gateway desktop computer about a year old. It had been working perfectly, but today when I restarted it, I got an error message saying " no boot disk has been detected or the disk has failed." At the bottom of the screen was a message saying to use the delete key to enter BIOS set up. I went into the bios set up, but didn't see anyway to check my hard drives...
I own dell inspiron 14z and i tried to install windows 8 on the 32SSD drive, i turned SATA controller to AHCI and installed the OS. Windows was booted ones and it was all fine but when i restarted the computer it consistently led to the screen "your pc ran into problem and needs to restart...." I tried turning back to ISRT and same, I reinstalled windows and turn the acceleration of but after installing the driver an error was occurred says "your computer does t meat the minimum requirements....".
I turned back to ISRT and tried to install the windows again but it could not find the hard drive even after browsing through usb (it was loading and loading but didn't find anything) and now i really don't know what to do...
My system has been on completely since 8.1 and has never needed to restart until I did some updates today.
Now I'm not really concerned about shutdown or restart as I will manually shut down the PC if I'm going somewhere for an extended time "I never leave anything on, power for the entire house is shut off" and will shut it off until I get back.
But the slow login is really killing me as it used to take 1 second to hear that little "tick" from the speakers and I'd see the login/splash page, but as of today I will hear that "tick" but the windows dotted circle will spin for oh.. 30 seconds than I can see my splash screen.
I've scanned my C: and D: disks, ran defender, antivirus, etc and all came back fine and I even have 90GB free out of my 120gb drive.
Now for the problem when I receive the laptop it was preinstalled with window 8 and on the first boot it took around 5 to 6 mins to boot to desktop..I reinstalled the windows considering it to be the bloatware fault..
The problem gets solved but after i download alienware osd drivers , alienware command center and nvidia drivers the delay is back ..
It starts with a bsod (your pc ran into problem)error window minidump memory.dmp.etc and after that windows boot restart and shutdown after almost 5 to 10 mins..
In the duration of delay there is no hdd activity and after 3 to 5 minutes when the hdd gets actives it boots to desktop in 5 secs..
I have a windows to go installation in a large external hdd, so I have made a second partition to use as data storage.
Now, when I insert the disk on my "normal" windows installation I would expect the data partition to be available... Instead I have to assign a letter to be able to use it.
The disk appears to be online and once assigned a letter you can unplug it and plug it again without having to do the letter assignment again.
BUT, every time I restart the pc I have to do it all over again.
on my computer with windows 8 format as I am. Dvd format to format I've installed disk, but I erased or something during the installation, format the error output. The computer BEGAN to GIVE the following ERROR :
GIVEN WARNING
Error: no boot disk has been detected or the disk has failed. </b> <img class="decoded" alt="http://i.hizliresim.com/W2jNzN.jpg" src="http://i.hizliresim.com/W2jNzN.jpg" />
Windows 8.1 failing to boot when any usb storage drive is plugged in during boot. My only solution is to unplug everything each boot unless I use my KVM switch which does not support usb 3.0.
I use a shortcut to restart Windows 8.1 to my UEFI BIOS. The problem is it goes through various screens and selections until I finally get to the one to boot to my UEFI. I was wondering id there was a way to boot directly to my UEFI without going through extra steps? Here's what I'm using now:
I'm getting soo many problems regarding booting after upgrading to Windows 8 Pro yesterday on my Asus Zenbook UX32A.
Specs:
2nd Gen i3-2367M processor @ 1.4GHz (for Ultrabooks)
6GB DDR3 RAM
500GB HDD + 30GB SSD (for Fast Resume, etc.)
Issue # 1: Whenever I Restart or Shut Down, the system HANGS there and does not progress *most* of the time. To fix this I have to always resort to holding the power button.
Issue # 2: When I boot the PC up, it takes SO long for me to get to the Start menu, around 1:15-1:30 min, which is longer than it took me on W7. I know I have an HDD, but this is abnormally long to me. Once in a blue moon, I will boot up in a matter of 30-40 seconds (which I think is how long it should take), but mostly it takes really long.
Issue # 3: To test the above 2 issues, I went ahead and opened msconfig from Run, and disabled all Non-Microsoft services except AVG to check. When I shutdown and power on - everything is fine, shuts down nicely, powers on nicely - however, the second time I do this, the system will hang on shut down, or will hang on start up, sometimes I can hear the startup sound but nothing on the screen, all sorts of weird actions.
Issue # 4: This one is funny. On standby (lid down), the system will restart itself. Happened while I was sleeping, I could hear the boot sound.
EDIT: The problem is still there when I disable 'Fast Start-Up' in Power Options. The problem is due to the processor state, it keeps resetting to 100%.
I finally got Windows 8 installed on my Dell M4600 dual boot with the Win 7 install. This is my business laptop so I needed to maintain full functions to Win 7 (I will completely migrate to 8 in the future) and ensure I could continue to work with it. I have two SSDs: Drive 0 is a 2.5" 256 GB used for data as d:. Drive 1 (this is how the bios designates them) was originally a 128GB MSATA SSD. I cloned this to a newer 240GB SSD to provide more room for the two OSs (and provide a good fail safe). With the clone I cleared the Dell recovery partitions and added the partition for Win 8. Currently I have some wasted space at the front but I will sort that out in the future. It has taken a week to get Win 8 up and running properly (tracking down drivers, getting the fingerprint scanner to work etc) but it seems to be stable and I have started to use it. Now to the problems:
1. The boot screen is the old Win 7 type (not really a problem by itself). I have used EasyBCD to adjust the default to Win 8. If I do a "restart" from 8 and then select 7 no problem. On the other hand, any restart to 8 brings up the MS flag and twirling thing and stops. I need to power down and start back up. No problem if I shutdown and then restart. I've been working on figuring out how the whole process works and I suspect the problem has to do with the switching drive letters depending on which OS is started and/or the Resume parameters in the BCD. Additionally, during all the hassle with installing Win 8 the boot loader is on the Win 7 partition. I'm hesitant to start using BCDedit on this laptop as I would prefer not to mess anything up. I also will not go through the hassle of re-installing Win 8 again - 3 or 4 times was enough.
2. At some point I will delete the Win 7 partition and expand the space for the Win 8 (I'll need to use some third party tools to do this). My concern is that the boot loader is on the Win 7 partition so how to move it to the Win 8 partition if possible.
I've attached two screen shots for the disk management status (win 7 an 8) and attachedoutput form BCDedit /enum all for both OSs.
I'm running Win 8 Pro which is installed on my SSD and I need to remove my secondary drive and connect it to another PC. When I do this, I get a boot error. Why an error shows up especially when it is not a boot drive.
Error and My Disk Management information is attached as an image to this message.
C: is the SSD and K: is my PATA drive which I want to move.
I just built a desktop with a sabertooth x79 motherboard, and am running Windows 8.1 pro 64-bit. When I click the UEFI BIOS Firmware live tile via the change PC settings>update and recovery>recovery>etc. my computer reboots normally to Windows and will not open BIOS. I have tried accessing it using the delete and f2 keys, but this does nothing either.
I am up to date in terms of my BIOS, and am definitely running UEFI and not legacy.
I am wanting to install my W8 O/S onto a 64GB SSD drive. I just want to use this for boot purposes and to fit some programs on as well. Everything else I am wanting to have stored on a 1TB WD Black drive. I want to point my libraries (Docs, Music, pictures) towards the 1TB drive. How do I do this?
I have three hard drives. One is a Kingston Hyperx SSD 120GB. The other two are for internal storage and are WD 500GB Blacks. I recently upgraded my computer. My new mother board is the ASUS M5A99X. I installed Windows 8 just fine back in Dec 2012 and it worked up until April-Mayish. My USB Hub was causing my computer to halt before POST. After exchanging it with a new hub, I was able to boot just fine.
Later that same day, I cleaned out the dust in my computer and added another harddrive. I wasn't able to boot Windows 8. It would just stop with a blinking cursor right before it should show the four blue panes. I went into BIOS and it didn't have my SSD listed. I accidentally unplugged the SATA cable for my SSD and forgot to plug it back in. After I plugged it back in I set the boot priority back to my SSD first.
I still couldn't boot so inserted my Windows CD to reformat. After it says "Press any key to boot from CD...." I didn't press anything and it loaded into Windows just fine. I loaded Windows this way for a while until I was able to troubleshoot it. After reformatting, I get "Please select proper boot device.." message. If I put the CD in, that goes away and it loads into windows after saying "Press any key to boot from the CD..." Here's what I've done to troubleshoot so far:
1. Set SSD to first in boot priority order in BIOS. Forced boot to my SSD in BIOS. Changed SATA from AHCI to RAID (lol) to IDE.
I've used bootrec.exe and tried bootrec /RebuildBcdbootrec /fixMbrbootrec /fixboot This still didn't resolve my issue.
2. I flashed my BIOS to 1708 because it was going to fix an issue I had with a USB device.
3. I reformatted Windows 8 with all drives unplugged except my SSD.
4. I've unplugged all SATA devices except my harddrive and tried to boot.
5. I've set the 2nd partition (90+GB) to active partition on my SSD.
I got this new Asus Transformer which is a Windows 8.1 system.
I made a few images with Macrium Reflect and created an UEFI recovery Flash Drive (with Macrium) for the Macrium recovery program. I can set the BIOS to boot from the stick (in the temporary or permanent BIOS settings). Problem is, when I hit Enter, it ignores the stick and boots directly into 8.1.
Is there another setting in the BIOS that I have to make in order to have it boot from the stick.
I've had my windows 8 computer for audio production for about 3 months, as has been reasonably stable. However, lately, it just will seize when using Pro Tools 10, and the only solution is to restart. I've looked through the event log, and nothing particularly stands out, apart from the obvious unexpected shutdowns. I solved it previously by system restoring, but Windows being Windows has removed the restore point that I used last time, and so now I'm at a bit of a loss.
I have this identical problem mentioned here : Scanning and repairing volume (?Volume...) on startup
I think it has something to do with my deleting the 'system reserved' 350mb partition when I reinstalled Windows 8. I don't want it showing in My Computer and when I go into Disk Management and give it a drive letter, this message goes away on boot. But, since I can't merge this very small partition with any other drive, I'm not sure how to not show this drive and not get the scanning message on boot up.
