I wanted to know if fast startup drains power cause i know sleep drains a bit and hibernate draws even less.
I have a desktop pc and i just want to know if for example it is better to use the CMD full shutdown or disable fast startup when i want to leave for holidays or the weekend for example so i can save some money from my bill .
I use several applications (video encoders, download tools etc.) that offer a "shutdown when done" option. What I've noticed with Win 8 x64, is that when this type of shutdown is executed, Fast Startup is disabled and when the PC is turned back on, boot-up time is significantly increased (similar to a restart, where Fast Startup is also disabled). Is there a way around this? It seems unlikely that all these applications do something wrong. Maybe Windows treats this type of shutdown differently?
View 9 Replies View RelatedI recently installed windows 8.1 and there is a problem with the windows Fast Start up (hybrid boot) feature as sometimes it works and windows starts very fast and sometimes it doesn't starts fast but just take sometime to start as if I started from a cold boot. I tried everything from inside the windows to solve this problem but nothing worked
I read in some threads that this fast boot technology works by saving the system into a hibernation file in the system drive when you shutdown the PC and at boot Hybrid boot well just use this hibernation file to start up faster by loading some system related files from it.
So I thinks that sometimes it loads the information from the hibernation file to load the system fast and sometimes it doesn't load anything from the hibernation file and load as if it was starting on a cold boot.
today i came home to my alienware x51 in some dell system recovery screen, i asked my kid what happened today she said the lights flickered several times, during a freak storm, So my pc must have tried to auto start several times, this is not good at all, i'm so lucky no damage was done at least so far. But how do i stop this behavior from happening again is there a setting i can turn off, so if we have another light flicker or loss of power that it never does it again. I just hope in the long run that my computer is not damaged who knows how many times it tried to reboot.
View 8 Replies View RelatedEvery time I start and restart my Windows 8.1 laptop it goes automatic in Power Save mode. How do I turn this off and late it every moment in High Performance?
View 4 Replies View RelatedBSOD error. I've read through some posts with similar errors and I've done my best to try some of the basic solutions for this (i.e., update drivers) but can't seem to pin down the actual problem.
I woke up this morning and I had a Driver Power State Failure message on my computer. I've spent all day trying to get it fixed and I'm about to throw this 3 month old laptop through the window (I'm running a Lenovo Y510P with Windows 8.1).
In addition to the BSOD when I try to shut down my computer it never actually shuts down. The screen will go black for about 5 minutes but the light on the power button stays on and the computer starts back up again on its own. However it never actually gets to the desktop. The circle of dots just keeps going and going and after I force it to shut down twice the Automatic Repair kicks in but it says it couldn't fix the issue. When I enter the advanced options and do a system restore I can finally get to the desktop. When I try doing a system restore from the desktop it will get to the end and I get an error message saying it didn't work.
When I get to the desktop some things just don't work right. Right click on a folder, clicking on the file explorer pinned to the taskbar, etc. locks explorer up for a minute then nothing happens.
I've also ran SFC and a it said some files were corrupt and couldn't be repaired. Attached are my log files.
I accidentally deleted my Fast Boot boot options and when I enable it my laptop restarts and shows the BIOS, without booting into my system(s). However, when I enable CSM boot it gives me option of booting into my systems. I want to restore my Fast Boot options so my laptop boots up faster and basically because my laptop is made for Fast Boot.
[URL]
I have Asus Maximus V formula z77 with latest EUFI firmware, and EVGA GTX 680 classified with EUFI firmware. Bios is set to fast boot etc, and it is enabled in windows, but I'm seeing no difference from before. I was using boot racer and seeing 11-14 second windows load times with another 10-15 til desktop. Averaging around 28 second boot speeds, whether from a fast boot shut down or a restart. My OS drive is a Samsung 840 EVO 250GB.
My windows 7 booted faster on an OCZ Vertex 4 128GB.
I've now optimized my remaining Windows XP system --removed all the junk and duplicate programs which run on later versions of Windows so I've got a nice small tidy XP system -- basically Scanner (old canon photo scanner N1240), some VINYL editing and cutting software, OCR software, Minidisc software (still great for portable RECORDING !!) and an HP plotter and one or two odd programs. I don't need Photoshop or office any more in the XP system nor Ms Office, and I don't bother with the Internet on it either so no security problems there.
I've kept connectivity for printing (Epson 1400 printer) - the whole OS is 12 GB and it boots up in about 2 Secs (a VM running from a Linux host) --I've allocated it 1 GB - I'm sure I could run it in 768 MB too.
On my 8GB laptop it runs fine concurrently with a Windows 8.1 VM (allocated 4GB RAM for that) both on a Linux Host.
I've got a Macbookpro
One of the best things I like is being able to find files *instantly*
I'm a directory freak and looove to embed my files in sooo many levels deep
On the Mac, I'll search. I'll blink... and the results has come back
(I hate the interface which I haven't quite got to grips with just yet)
On Windows: there's a file. I don't know what it's called. I don't know where I've put it. I know I last used it 3 months ago and it's a Word doc. I don't know what drive I've put it on...
So I search the whole damn computer... for a doc file less than 6 months old
I then go fishing... go for a coffee... have a bath...
And when I get back 5 hours later... hey presto... Windows gives me a list of results.
I know there was some indexing programs - like Google Desk (erm... I think that's what it's called - I could just be making that up from my mind)... I know Microsoft had one as well... and a few other 3rd party programs where available.Where are they?
I have Windows 8 - I thought it would be built in?
One thing I don't like is adding an extra layer - thereby slowing my machine down
On Mac it's part of the blood system - it's inbuilt and takes no overhead
I assume, every single time a file gets added or removed... the file record database is updated.
Windows to go doesn't seem to have a Fast boot option -- Not a real issue since I use an SSD for this but just curious. I suppose if Windows to Go is being used on different computers and the idea is to use the external device totally then it obviously doesn't make sense to store a file on the Host PC's HDD.
Anyway two screenshots -- you can see the Windows to Go doesn't have a fast boot option. Ist screenshot is from Windows to Go -- both running Windows 8.1 enterprise update 1 x-64 on REAL (not Virtual) Machines.
I noticed from some days that in windows 8 pro, the Fast Start-up did no longer works. and windows booting loading and shutdown takes many time, 2 or 3 days before it was fast since I installed windows 8. why is that,? although these option still checked,
View 9 Replies View RelatedIs fast user switching in windows 8 enabled by default? How do we check if fast user switching is enabled or not without using group policy editor?
View 1 Replies View RelatedOn Acer 3820TG (Win 8.1) I am trying to force system to use hybrid shutdown/fast startup function. I've already tried all steps from this topic: Fast Startup - Force Use by All Users in Windows 8 but no success - system performs full shutdown. The only solution that works for me is shutting down with command "shutdown.exe /s /hybrid /t 0". Then system shuts down in ~5 sec and starts in ~15 s.
If you shut down a computer from the right-click-left-bottom-corner menu in desktop mode, then click Shutdown -> system performs full shutdown. If you click Shutdown in charms bar -> system performs hybrid shutdown. Now my PC is starting in 8s, laptop in 15s.
I am using Windows 8 64 Bit and have lost the password for the Administrator Account (Local). I am only able to login using the Standard Account and unable to create any more admin accounts or make any changes, I am even unable to perform the Gateway Recovery as its asking for the Administrator Password. I even can't enter the BIOS to disable the Fast Boot or change the First Boot to USB so that I can use any other Image of Windows 8 to reinstall.
View 2 Replies View RelatedI have a desktop with Windows 8 upgraded to 8.1, I can enter the BIOS setup by pressing the DEL key only when the preceding shutdown is a complete shutdown (shutdown with fast startup turned off).
If the desktop is shutdown with fast startup turned on (incomplete shutdown), and Windows cannot be loaded during the subsequent starting. How can I enter the BIOS to select to boot from a USB stick?
I've had problems since yesterday regarding the hybrid (fast startup) shutdown.
The machine just won't do it, instead it does a full shutdown. I have the option thickened under power options but it still doesn't work.
The only software change was running a portable version of 00 Defrag 16. I used a portable version because installing it would cause the problem I described above (maybe something about reg files?). I've used the portable version a few days ago but just to scan the drive, yesterday I started to defragment the drive and then the problem surfaced.
hyberfil.sys
Running the shutdown -s -hybrid -t -f 0 does a full shutdown too.
Windows 8.1 ... Noticed shortly after upgrading the Asus VivoTab Smart to Windows 8.1 (from Windows 8) -- that sometimes the system's date and time will be incorrect after a shut-down, turn on cycle. Sometimes the clock is as fast as three hours, but others much longer. Interestingly, if you go into PC Settings > Time & Settings and then toggle off the "Set time automatically" option, and then toggle it back on, the time and date are immediately corrected. However, the time would again be wrong after a shutdown. If the tablet is restarted, though, the time is correct again.
THE SYSTEM: Windows 8.1 (upgraded from Windows Store). Intel Atom processor.
WHAT'S BEEN TRIED: I:
1. Stopped the Windows Time service, registered it again and restated it. The issue remained. I entered the desktop and clicked on the time in the lower right-hand corner of the screen. From here I confirmed the time zone was correct and changed the date and time. That fixes the problem during the current session, but the time/date are again wrong on reboot.
2. Tried Safe Mode. In Safe Mode, the time is correct and stays correct.
3. Tried Clean Boot. In Clean Boot, with all non-Microsoft services disables, the issue returns and the time is wrong again.
THE BREAKTHROUGH THAT BEGS FOR AN ANSWER: While reading this thread, I read up on Windows 8's Fast Startup. Just on a lark, I went into the Power settings area of the Control Panel and turned off Fast Startup. Now the clock is correct. There's a downside , of course, to this in that shutdown and startup is notably slower.
The tablet now keeps perfect time -- but cannot have Fast Startup - which is a bummer for a tablet.
QUESTIONS:
1. Is this is hardware issue? Asus is offering an RMA -- but hate to add to a landfill when this is fixable with software.
2. Is there a way to check the BIOS clock on a Windows 8.1 tablet ? I believe it's a UEFI system....
3. Is there a way to fix this so fast startup can be used -- and have correct time?
4. Is this a known issue?
5. Is there a way to make sure the Windows Time service is activated in a Fast Startup.
Host machine on same network LAN address 192.168.1.102 on WLAN - perfectly good connection / internet etc
Name BROWNBEAR
Windows machine to be pinged -- BLACKDOG on 192.168.1.103 but on a LAN (Ethernet)
Both PHYSICAL machines (i.e not running inside VM's)
FROM BLACKDOG no problem pinging BROWNBEAR either by Host name or IP address
BLACKDOG in the Ethernet connector seems to have a Connection specific DNS suffix WAG320N (Where that came from I haven't a clue !!) - It seems to be the HOSTNAME in the router.
BROWNBEAR pinging BLACKDOG via IP address 192.168.1.103 --works fine and shares accessible via mount via IP address.
Now when BROWNBEAR Pings BLACKDOG via Host name (BLACKDOG) it returns slowly PING BLACKDOG.WAG320N(62.169.151.91) -- haven't a clue where it got that IP from !!!.
Looks like I've got a DNS hose up somewhere
How to "Unhose" it. I don't want to refer to BLACKDOG by IP address each time since after reboots this will change (should be managed by DHCP). I haven't a clue on WHICH machine the problem is on -- BROWNBEAR is WIFI connected while BLACKDOG is on Ethernet.
Windows networking
IPCONFIG for BLACKDOG (Ethernet connected) shown
Router Ethernet settings shown (should I have a Domain !!) Always worked without one before.
I upgraded from win7 to Windows 8 and i had notice that i don't have fast startup and hibernation option in shutdown options. I checked in command prompt and i have this and . Laptop starting slower then my 7 year old Toshiba running Windows 8. Is this coused by lack of Ram. I have 6gb.
View 9 Replies View RelatedFor a few days I have been having some problems with my computer. Whenever I shutdown properly and then start again, the Desktop loads fine and after a few seconds of coming to the desktop. I see a black screen in front of me, I try to press num lock on and off to see if the system froze, it indeed froze. I disabled fastboot, after that even if I start after shutdown, it boots fine.
If I restart, it boots fine. Not sure why as my system should be fully compatible with fast boot. Here is my system specs, everything is updated as of posting:
MSI Z87 - G43 Gaming Motherboard with latest BIOS
Sapphire TriX R9 290 OC
Samsung 250GB 840 EVO
8GB RAM
I'm not sure what's exactly the problem but sometimes Windows 8.1 hangs at the Windows logo at boot with Fast Startup enabled on a mSATA SSD with my Lenovo Y570 laptop.
My laptop does not support Secure Boot/GPT or UEFI, so I'm really unsure if that's the problem.
Once I disable Fast Startup the boot process never hangs ever but it makes my bootup time slightly slower.
I can't enter my BIOS/UEFI after activating "MSI Fast Boot" in the BIOS/UEFI.
I read somewhere about "GO2BIOS",but my installation disk didn't came with that software.
MB: H81M-E34 (MSI Global H81M-E34)
i have problem with my dualboot. When installing ubuntu 13.04 and window 8 along each other, windows 8 won't hybernate (screen just gets blank and lock itself), tha same with turning computer off (when fast bootup is enabled). When i recover mbr using bootrec.exe /fixmbr (basicly switch back from GRUB2 so i cannot boot into linux) everything works fine.
View 2 Replies View RelatedI have very recently bought a Dell Inspiron 15z with the facial recognition software. Unfortunately, I can't find where to download it. Link to the download page?
View 5 Replies View RelatedOver the last few days I built a new PC with ASUS A87 Pro MB, no PCIe cards, and Samsung ssd 840 Pro boot drive. Lots of changes on a daily basis. For a while, the FAST STARTUP hybrid boot was working. Then it stopped, and I'm trying to debug it.
When PAST STARTUP is enabled in power options, I get a repeatable Critical Error - Windows did not shut down properly, and the startup time is as long as it would be without FAST STARTUP enabled. There are no BSODS, and no apparent harm from the Critical Shutdown error.
Check my specs for details
So recently after the windows update. The one that makes Windows 8.1 more "keyboard and mouse" friendly
Every time i restart my computer,it logs in quiche but the start up programs take forever to run around 3~5
The list of start programs is there on the screen shot
The rest of them are disabled
How To create a start button shortcut to get to start menu in the taskbar. So that we don't need to click the invisible place in the taskbar And there would be a button on which we will click to go to the metro ui start menu.
If we will click on the start button Then We can get The Start Screen. Is there any way to create it??
I see there is a Classic Start 8 Menu that once installed will give you back the Windows 7 style menu. If you install it, can you still go back to the default Windows 8 Start page if you like?
View 3 Replies View Related3 days before my Windows 8.1 pc wasn't working during log in it showed up with "The System Event Notification Service service failed the sign in."
I posted this thread but no one replied then back yesterday I ran it into Safe Mode and used the CMD and put these "sfc/scannow" then the PC booted into Safe Mode.
But in my Start Menu many apps won't open accept Facebook, Twitter, Photos and the Store opens, and when I goto install apps it shows "This app wasn't installed"
And my Start menu is like this:
And the "sfc/scannow" command shows that there are Corrupted or Missing Files Then I also did these:
DISM.exe /Online /Cleanup-image /ScanhealthDISM.exe /Online /Cleanup-image /Restorehealth But then also no luck .what to do I updated my PC from Windows 8 to Windows 8.1 4 days before And this happened 3 days before And the PC started to boot from yesterday.
does any driver relate to power settings? i recently installed some driver for intel devices and graphics does them probably cause problem?
View 9 Replies View Related
