So I upgraded to Windows 8 today and finally finished all the installations only to find that using a 1920x1080 resolution means that the display is too big for my screen (a 32" Samsung full HD TV). The screen is cropped by about a half a CM all the way around. I had to revert to a 1776x1000 resolution for the display to fit properly on the screen but would much rather use the highest possible setting but I cannot seem to fix the problem.
I am running 64-bit and have updated all display drivers and completed windows updates. My GPU is an ATI Radeon HD 5800 series.
I know how to select the second screen options, however, my Surface Pro and our Samsung Laptop both running Windows 8 cannot detect a second monitor/screen. We are connecting via the HDMI port, but it will not display no matter what option we choose nor whether we run it from the desktop or apps. This is what we use for work to display presentations for clients.
I bought an Alienware M17x R4 with a pre installed windows 8 64 bit operating system then updated to windows 8.1 via windows update. My problem is that it won't run the Alienware OSD application which is supposed to replace the default windows icons when using the function keys. I tried researching and tried various methods including this one but to no avail. Link here...
I just reset my PC. I was installing things back onto it (firefox, Spotify etc) and all of the sudden the screen went dim. I went to settings and it says "Windows can't adjust the brightness on this display" . Restarting the computer does nothing.
For last couple days I've been going through a minor computer issue. I wasn't doing anything special, I just turned the computer off. And the next day the problem occured; After bios and Windows 8 loading screen ( the little dots going round, just below the windows 8 icon ) my screen goes black and there's no signal to the display. I've already tried formatting my hdd and installing windows 8, also tried doing Reset option, from the Windows 8 troubleshot system. I can't access my Safe Mode, because it tells that Windows can't finish the installation in safe mode ( After installing the new system I format all the data and it goes just fine until the windows icon and "Preparin your devices" sign. It goes 100% and gets black again.
Since installing Windows 8 to my laptop, I can no longer display to my Samsung USB hub monitor.
When I try to duplicate or extend, the hub says 'Connecting to PC...' but then nothing happens. Something is working as my mouse and keyboard are plugged into the hub and they work. I just cant get the display. I think all my drivers are up to date.
I just purchased a new windows 8 PC. I was attempting to hook the computer up to my tv through hdmi (the pc has no VGA input) and when I went through the normal paces to put the display on my tv (display desktop only on 2), the signal did not transfer and there is no display on either my tv or pc! how to revert the display back to my pc monitor without being able to see anything? Acer support was less than useful. It's an acer aspire z3-605 all-in-one pc.
I just recently purchased the ASUS ROG G750JM-DS71. I noticed that I can't seem to the get the display to be in full brightness. For example when booting it up, the brightness seems much higher, and after a few seconds at the desktop the screen would suddenly get darker. The brightness is indeed all the way up, and my laptop is plugged in. BTW, it actually looks more orange instead dimmer, like the there is much less blue emitted light. how I can get rid of this setting or what could be causing this? The display does indeed change while at the desktop, so I know this isn't the highest brightness.
Is there a way to change the default lock screen settings so that it displays on all monitors? For example, I have a triple monitor setup. When I hit Win + L, the lock screen only shows on the middle screen... I'd love for it to show on all three screens if possible.
Not like in Windoes 7, when Windows 8 is starting, only the recent user account is displayed on the start screen.
My question is: how to enforce Windows 8 to displayy ALL user accounts on the start screen, so that one can choose either of them at startup, independant on which was loged on previously.
I'm using Windows 8.1pro,also I use HDMI to sometime output video files on a TV screen,that works fine. HDMI cable is always plugged in,primary display is set to my computer monitor.I don't always use TV screen and because of existing cable connection my OS extends image to second screen and my mouse cursor alway disappear when it goes to borders,that is an annoying situation,is there a way to disable/eanble extend display on second screen without unplug the cable,just like I can set default output sound device (computer/hdmi sound) ?
This just randomly happened today while I was moving around files on an external drive. This is what the first few rows of icons should look like, but it's like everything under the word "Start" was moved down and partially off the screen. I don't know how to get it back, or which process to attempt restarting (is the Start screen handled by the explorer.exe process?). Also, the right - click menu (which is usually on the bottom) is completely hidden, so I can't use any of that functionality.
I have a laptop where my LCD is broken on the left side, but the right side works fine. Is there a way I can change my display to only show on the right side? I've managed to make the display horizontally smaller, but I can't figure out how to change the center to the right side. This is annoying because I have to re-size every window every time I open it, and then I have to constantly scroll back and forth on web pages. I'd rather be able to maximize and have it only on the right side. See the attached picture to see what I'm talking about.
Currently, my local account name is displayed on one line in the start scren. I'm looking for a way to display the local account name across two lines, like what is done if I were signed in with a Microsoft account. That is, the first name in a larger font and the surname in a smaller font on the next line.
I have an Acer Aspire laptop which has recently stopped booting up. It doesn't display anything when powered on. I know it is not a problem with windows because it doesn't even display the Bios boot screen. Why is this? The fans start but I cant hear the hard drive.
I'm trying to keep the windows 8 start screen open on one screen and have the other open to the desktop, but any time I click an app on the desktop the 2nd screen with the Windows 8 start screen minimizes. Is there any way to change this behavior?
I'm on HP laptop 2000-2d27dx Windows 8.1. My login screen shows only one user account. I have to click on arrow to switch to other existing user accounts. Is there a way to display all user accounts at login screen?
I have recently installed 8.1 on my desktop with 3 local user accounts (no Microsoft accounts) and no user passwords, and Guest account Off. I have bypassed the lock screen but whenever the computer is switched on or a user signs out, the OS loads the last user instead of going to the user select screen. Something that all Windows OSs have done from go to Win 7. I can back arrow which does display the user select screen.
Or more importantly, any way to make it act like all previous Windows systems. I would not be fussed if this was a single user computer.
All of these partition, except for the NTFS partition, are listed as 100% Free. The NTFS partition is listed as 88% Free.
Are these partition available for use, or are they being used for something(?).
I am working on the boot situation, trying to find out how to input from the cd/dvd writer, but have not over come the "Secure Boot" thing yet. That will be next on my agenda.
I am attaching a copy of the data partition scheme ....
Microsoft uses a display server? I assume it does but I am doing a presentation on display servers and I found a ton of information on Linux and OS X display servers but I cannot find anything on the display server Windows uses.
I have run into an issue with a Pavilion g60-230us laptop. After going to sleep or closing the lid, when I open the lid again the laptop wakes up, but the display never resumes. I can see it kind of try to come on, but nothing ever shows on the screen. I am currently on Windows 8.1 Pro. The system is 32 bit and not running a separate display adapter, just the integrated Intel configuration. I have tried downloading the latest Windows 7 driver from the HP support page for the g60 but it didn't work. They don't offer drivers for Windows 8 on this model. I have also deleted the display in device manager, rebooted and let Windows find and install its own driver, but this also didn't work. Keyboard and mouse both have the box checked for allow this device to wake the computer in the power settings.
I have a problem of windows 8.1 and my laptop (HP EliteBook 8560w). My display is full HD (1920x1080), 15.6", GPU: nVidia Quadro 2000M. When I installed windows 8.1 (all version, 64 bit) the GPU driver is updated automatically at lastest version (327.31). But some 3rd application ex: Google chrome... is blurry. Then, I chosed the option "Let me choose one scaling option for all my displays" at 125%. All thing is OK.
But whenever I started my windows, my display always flashing one time, about 1-2s. it's very inconvenience. Because of that problem, I downgrade to windows 8.0. But i still want to use windows 8.1 ....
I've noticed sometimes when I first powerup my windows 8 machine, it turns on, but I get no display on my monitor (has happened with 2 monitors). I am using the latest beta ATI drivers for my card. The weird thing is, pressing delete i dont even get the bios to appear, just a black/dark monitor screen. I am wondering if repairing the bootloader could fix this? How to repair the bootloader? I won't loose any of my data, will I?
After turning off, turning on the computer a few times, I finally get display and can get into windows 8, but it's annoying.
I'm using a Windows 8 64-bit ASUS VivoBook S200E as home media centre. The player is MPC-HC and the Bluetooth remote uses mouse movements and keypresses to browse the playlist and control playback. It's working very nicely, except for one problem - the mouse pointer is never visible! The only way to activate it is by making gestures with the touchpad (or with a mouse). That means getting up which isn't what remotes are all about . The computer has a touch screen, but that isn't used and doesn't affect the mouse pointer anyway.
I've been told that this behaviour is a Windows 8 "feature" for touch screen devices - the device being in touch mode by default and not displaying the mouse pointer until pointer movement is detected. I've tried all settings I could think of but nothing so far has changed this behaviour. Just to be clear, we're not talking about "hide mouse while typing" kind of behaviour. In this case, when the machine boots up there is no cursor, and it remains invisible for ever, unless you move a touchpad or mouse.
Is there some setting or registry value I could modify to change this behaviour?
Alternatively, is there some script I could use to just jiggle the mouse at startup? I've used Windows Scripting Host for things like this before, but the SendKeys method seems not to support mouse control.
Have upgraded to 8.1. Now when I navigate to Google in IE11 and enter a search, the results are displayed in single words all down the left hand side of the screen, like so:
I installed windows 8.1 pro preview successfully in English, and since I use French very often, I installed and changed the display language into French. I also checked two options concerning the welcome screen and account users to display them all in French and worked perfectly.
I noticed the watermark before changing the display language into French, then followed this method to remove it : How to Remove Windows 8.1 Preview Watermark | MyTechBlog the method worked fine, but when I changed into French the watermark turned out again, then repeated the same method until I removed it.
when I finished I noticed that "My Computer" which appears as "This PC" + "Control Panel" + when I open Control Panel everything appear in English. but my display language now is French except the aforesaid.
I have Hybrid boot a.k.a Fast Boot enabled before.. This occurred to me last week.
When I click on shut down, It shows shutting down and displays turns off.. little later the screen turns on and the desktop comes back.. If I have turn it off, I have to force the PC by holding the Power button. I googled it and they said to turn off Hybrid boot, but it was the only reason I installed Windows 8..
Now that I turned it off, it takes a while to turn on/off the PC..
This not only affects Shut Down but Sleep, Hibernate and Restart too..
