Windows 8.1 Not Shutting Down - Display Turns Off Then Comes Back
Feb 23, 2014
I have Hybrid boot a.k.a Fast Boot enabled before.. This occurred to me last week.
When I click on shut down, It shows shutting down and displays turns off.. little later the screen turns on and the desktop comes back.. If I have turn it off, I have to force the PC by holding the Power button. I googled it and they said to turn off Hybrid boot, but it was the only reason I installed Windows 8..
Now that I turned it off, it takes a while to turn on/off the PC..
This not only affects Shut Down but Sleep, Hibernate and Restart too..
My friend's Dell Inspiron laptop is set to turn off the monitor after 10 minutes. Once that happens, we cannot get the screen to come back on again, hitting any keys or mouse buttons, or even tapping the power button, does not do it. It is not asleep or hibernating, the power light is lit and hard drive is spinning. Have to force a shutdown.
I know I can tell it to just not turn off the monitor
I upgraded to Windows 8 from Win7 a few weeks ago. The display goes black after 60 seconds of inactivity no matter what setting I change. I would like to read documents without having to hit the space bar every minute.
My laptop is a Samsung Series 7 and requires Samsung Easy Settings to run the backlit keyboard. I've looked for a setting in the Samsung software, but don't think that is the problem.
I've also tried to adjust the power plan and advanced settings with no luck. My current power plan is set to Never on turn off the display. Adaptive brightness is turned off.
I have my Windows 8.1 setup so the display turns off in 1 minute.
I have the power options setup so that the power switch shuts the system down.
But it doesn't. If the screen is off and I press the power switch on my PC the screen comes back on. I then need to press the power switch a second time for the computer to power down.
Is there anyway to configure Windows 8.1 so that the power switch does not turn the display back on, but just immediately shuts the system down?
Since I have installed windows 8.1, every time for example if I don't use my laptop for 10 minutes, and because of the battery saving setting plan, my display turns off. Before I installed windows 8.1, I could just move a mouse or press any key and display would turn on, but since the installation I have to restart my laptop (Samsung ultrabook), even if I can hear it's on and working.
When I close my lid, with the system set on not sleeping (just turn off back-light) and reopen it the screen remains blank. It happens even if I'm logged in, or not, or from sleep. So, basically, the display never comes back from being blank.
I tried updating all the drivers, I tried with the original ones, same problem....
I upgraded to Windows 8.1 and all has been great except one thing. When I leave the computer for about 10 minutes or so, the display turns off like it is supposed to. If I want to turn the display back on though, I find I'm unable to with the mouse, keyboard, or power button. It's like it is stuck in limbo and I have to restart the PC.
Since yesterday everytime I shutdown or reset my laptop(Dell XPS15) it eithewr gets stuck on the restart screen forever or just goes to blanck screen with the power still on if I shutdown. So then I have to hold the power button down to switch off in both casesI stupidly don't have any recovery option inplace and when I try and do a fresh reset or anything from Advanced system options it gets stuck on a blank screen because it can't reset properly.Also anytime I try and disable or uninstall drivers in device manager it will constantly say it's uninstalling or will go to not responding.
I am having trouble with the computer shutting down once in awhile. The fans and stuff stay running but the monitor shuts off. I have to press and hold the power button for it to shut off. I know this is how it shuts down for 8 but i wait for 5 minutes and it is still running.
While shutting downing my PC, a dialogue box with title "Windows application error" is displayed and gets automatically terminated. Error code number varies each time. This problem is started after i upgraded to 8.1. How can it be retrieved ?
I've got an issue with Windows 8.1 x64 where sometimes (not always), if I Shut Down the computer, it'll shut down as normal, even displaying the "Shutting Down..." message, but rather than powering the machine off, it'll reboot just as if I had initiated a Restart instead of a Shut Down.
I definitely know I haven't accidentally told the computer to Restart as it's happened more than once, I know I've selected the Shut Down button and Windows 8.1 even states it's Shutting Down and not Restarting. If I restart the computer instead of shutting it down, it'll restart just as it should, nothing wrong there.
There is no abnormal behaviour at all during this process. The computer does behaves identically to if it was supposed to Restart and Windows throws no errors, BSOD's or any trace of something going wrong and thus somehow causing the machine to reboot rather than shutdown. powercfg /lastwake gives no information at all and Event Viewer lists nothing under Critical or Errors that could be a cause.
Most of the time though, the computer will just shut down as it should, but this random rebooting is getting very irritating. If I shut down the computer again after it has restarted (when I told it to Shut Down), it will then Shut Down as it should.
Something I should note however, when I shut down the computer, I do so through Classic Shell Start Menu's Shut Down button. Every time these random reboot occur, I have shut the computer down via Classic Shell Start Menu. I rarely shut the computer down any other way, so perhaps somehow Classic Shell is to blame? Perhaps there way of telling Windows to shutdown is a bit flaky?
I believe the same issue occurred on my laptop (also running Windows 8.1 x64 with Classic Shell Start Menu) when I shut it down through Classic Shell's Start menu, but only once (I don't use my laptop nearly as much as my desktop). This problem has never occured on my desktop or laptop back when they were running Windows 8 (not 8.1).
I have installed all those updates and now my PC sometimes suddenly turn off by him self(never did that before) and temperatures are normal... Here is picture of event log, look with team viewer?
Every time in the morning i would on my laptop and i would go and do something to wait for it load but when i come back after 5 min the laptop does not have anything and i will have to press the power on button again. After i have done loading there will be a message saying "your PC ran into a problem." File that will be sent to microsoft
Windows seems to keep shutting itself down after about 1-2 hours of no user input. By this I mean, regardless of what programs are left running, if I do not move the mouse of press a button on the keyboard once an hour, the system will shut itself down.
This is not a crash, there are no errors, the event log shows nothing unusual, Windows runs through the full and proper shut down procedure as if I had clicked the shut down button myself.
I have checked through every option I can think of, I have looked at every option I can think of in the Power Options menu, including the advanced options, I have searched on Google and on here, and I can come up with nothing.
My Windows 8 laptop (model is HP Pavilion g6-2210us) and for some reason it no longer boots. Here's pretty much in order how it went down:
-Windows 8 stops responding for no apparent reason -I force a shut down and try to turn it back on, thinking that would fix it -It starts loading Windows 8 up like normal, but it's taking an extremely long time to do it. -After a while (about 20-30 minutes) it stops loading it and just goes black, but the screen is still on -After this happening 4-5 times and nothing happening, I hit the power button 3 times to try Automatic Repair, which says "Preparing Automatic Repair" for 20-30 minutes, then goes black again
I think it may be hard drive failure but the drive gave no signs of dying, like slowing down, they don't usually just die like this. It's more likely to be just file corruption, but I have no Windows 8 disc, and I never knew I would need to make my own recovery disc. Anyway, I do know how to do the replacement of anything that can be replaced in most laptops, and I would probably just load up Linux or another free OS on the new drive if I need to get one.
Using Windows 8.1, computer is now turning on by itself. I make sure I shut it down correctly. It turns on but the screen is blank and it does not respond to mouse or keyboard. The only way to get it to work is to uplug it and then plug it in again. This has happened numerous times. There are no messages on the screen. Have run numerous virus scans and nothing shows up. The computer is not even a year old - Dell inspiron all in one.
Just got the Lenovo ideatab lynx in the mail today. Used it for like 2 hours.
Only things I did: install chrome, uninstalled nortan (borderline spyware antivirus in my opinion).
It restarted without telling my anything to configure updates (said do not shut off, preparing to configure blah blah blah) Then I plugged in my galaxy s3 to use usb, its started installing the drivers then shut down again.
Now it is constantly shutting down as soon as it gets up. No peripherals are plugged in, it is connected to power.
I don't have a keyboard to run usb for safe mode. And I'm pretty good with computers.
I have windows 8.1 and I have noticed that my externall hdd turns off after a few mins of being idle (The led turns off as well.), but I can still see it on the windows explorer and it turns on again when I click on it.
I'am using Windows 8.1 with all latest updates. I'm facing problem with Windows update since installation of a fresh copy of windows. I always keep Windows update to automatic windows update installation mode. But if I reboot my laptop or shutdown it, then the update turns to "Never check for updates" mode. I have tried refreshing my Windows (from Update and recovery) and troubleshooting with Windows update troubleshooter.
I am fixing an HP Pavilion g7 Windows 8 laptop and when I turn the computer on, in about 5 minutes the screen powers down but the hard drive is still running. I have set the power options to turn OFF the display to never and to put the computer to sleep also to never and I have it set to power saver, the computer will repeat the same process over and over again. I have access to the internet or watch you tube videos but the problem remains.
I have my laptop connected to an external monitor with HDMI. The laptop is always plugged into the A/C,and its cover is always closed, so it's used as a desktop computer.
I have noticed that the monitor often turns off very quickly, sometimes after only a few minutes of idle time. This is extremely annoying, and I don't know how to fix it. In Power Options, the "Turn off display after" setting is set to 10 minutes on battery and 30 minutes when plugged in.
Whenever I turn on my windows 8.1 desktop computer, ilog in as usual. When I try to open things as soon as my computer logs in everything starts crashing, and eventuly I am forced to restart my computer?
I hate when things don't work when and how I'm expected them to. Anyway, I have Windows 8 Pro N and I want it to shut down instead of hibernate. I made a shortcut:
"C:WindowsSystem32shutdown.exe -t 00 -s" and whenever I press it, it reads "shutting down" on a blue screen, after that it turns off. So far so good. But when I press the power button it reads "resuming from hibernation".
I close my laptop before going to bed. And some mornings I wake up, and open my laptop, only to find out that it has shut itself down while I was sleeping, and now windows wants me to send an error report. This has been getting rather annoying.
I have a Lenovo Ideapad and recently completed updates for it. I shut the computer down properly (at least I thought) but when I go to turn the computer back on after a few days, the "shutting down" screen appears and it will not go away. I am able to move my mouse but nothing else. This has been going on for almost an hour.
I am using Windows 8 on my laptop. If I connect my laptop to a video projector and left it idle for about 4 minutes, the screen turns black. So I am trying to avoid this. Here is what I did so far.
First I found that for Windows 8, the option of presentation setting is not available in Control panel -> Windows Mobility Center (Fig. 1).
Next I looked for the screen saver and found that I have not activated it at all. Also the (Fig. 2)
Next I tried to Change the power setting by going to Control panel -> Change power setting -> Change when to turn off the display and set all of the as Never (Fig. 3)
I still got the black screen after doing these. Finally I noticed that after I left my laptop idle for about 4 minutes, it says "maintenance is in progress" in the "Action center". After searching through web, I found that an easy way to stop this maintenance during my presentation. I disconnected from the wireless internet temporary when giving a presentation. I tested this and after disconnecting from internet there will be no "maintenance is in progress".
However, the screen still turns black during presentation, even after disconnecting from the internet.
I am running Windows 8 Home Edition. On a HP DV6-7250CA.I have a Intel Centrino Wireless-N 2230 Card.I also have several other laptops and desktop all connected to the same router. For some reason, randomly my Windows 8 HP laptop turns of my wifi internet access just on this laptop, then when i try to reconnect, it says unable to connect. The only way I can get back on line, is if I go to device manager, and disable and then reenable my wireless card.I have tried reinstalling the driver, and it still happens. None of my other machines are effected and run great on wifi. Why just this windows 8 laptop is randomly doing this?
i am running windows 8 on my Toshiba Satellite L 300 , it was running smoothly and all its features are good too. but suddenly the screen turns out a solid color based on the color which was on desktop ( for example if i am having a yellowish theme, the solid color will be yellow ) .. i have seen a lot white and light yellow color the most when the screen change . after the color change the total system will be unresponsive, the only way i find is to press the power button for 2 seconds, ( ya full power off ) ... again if i start the system, may be it will work perfectly for a long time but suddenly again it happened..
the problem start before two weeks, i thought it may be due to some software error and i done a full system reboot and i don't have any program installed except windows 8, but still it exists. .. now i am sure that problem is somewhere in windows OS or my hardware ... i am unable to find whats going on ..
I got a new laptop. It's a Dell Inspiron 15r SE (i15Rse-4267ALU). Basically, whenever I unplug my laptop it turns extremely slow. Not slow as in some programs take a while to load, I mean like I can barely move the mouse across the screen slow. My computer's specs are:
Intel Core i7-3632QM Processor 8 GB of RAM Windows 8 Operating System AMD Radeon HD 7730M Grapics Card (switchable) Intel HD 4000 Graphics Card
Since I have had the laptop, I have always had it on plugged in ... recently I unplugged my laptop to bring it in the other room and I could barely even more the mouse across the screen. Its power plan is on High Performance, I have Google'd my issue before, and I haven't been able to fix it. Why my PC is so ... slow unplugged?
My laptop keeps shutting down. It shut down just now 10.05pm british summer time. It also shut down yesterday and has shut down every now and again for the past few weeks.
It isn't overheating, i ran speccy and its ok temps. I run windows 8 and when it shuts down the screen behaves as if I have pressed the shut-down option at the bottom left of the screen, but I have not pressed it, it just does it automatically.
What checks I can do to find out what the problem is.
I cannot print with Win8anymore! I was able to print on my WIFI networked printers previously with this computer.
Other computers on the network can print to them. Upon investigation, I found that the print spoiler ws off. I found the MS directions for restarting the Spooler. I turned it on it shuts itself off when you look at the installed print drivers!
