Win 8 Was Running So Poorly - It Showed As A Raw Disk J?
Nov 10, 2013
Having no fun with the Win 8.1 - call it downgrade. Had problems from the start. I've had Win 7 for some time. I bought Win 8 and an SSD and did an upgrade from 7-8 on the SSD with no problems using Paragon Migrate OS to SSD - worked very well. This left me with Win 7 on a 320 gig hard drive and Win 8 on an SSD. I didn't touch Win 7 after that until the Win 8.1 downgrade which left me with an unstable Win 8 OS. When trying to boot into 8.1 I was getting very slow response, odd startup of some programs, lockups, etc. I tried to run safe mode (recovery) in Win 8 to see what I could do to fix, but it was very hard to get into and not much use when I finally did. The last time I tried to get into safe mode in 8.1 the computer booted up into safe mode for Windows 7. Since then restarts are in Win 7, not 8. The boot into 7 rearranged the drive letters and the Win 8 SSD became an NTFS (Healthy active, primary partition), no boot, page file, etc. C: = Win 7, E: = Win 8. Since then I have not tried to start Win 8 - not sure how. (See attachment).
having Win 7 . I would like to keep it available and updated while also having Win 8 as an option.
Is there a decent start-up software for choosing which system to boot up?
Is there a way for me to repair Win 8 (disk E) so that it is bootable? The third question is whether or not I can boot up a Linux OS (Cinnamon) onto a partition on a disk and play around with it - with the same boot up software?
Perhaps a related problem was that an external storage drive had some how become unusable during the upgrade - since repaired with chkdsk /f (Gparted error log attached). I don't know if this was the primary reason that Win 8 was running so poorly. Before it was repaired it showed as a Raw disk J: and E: Win 8 disk was not shown in Computer or Disk Management. When J: was shut down E: became visible again. All disk show now that J: was fixed with chkdsk.
View 14 Replies
ADVERTISEMENT
Jun 17, 2014
I have an issue that has been happening since last week i think. The problem is that even with the computer in idle the disk usage has these spikes. When i want to play a simple .mp4 file it freezes several times and the all computer freezes when the spikes reach 100 %. I don't know what is causing this issue.
View 9 Replies
View Related
Feb 1, 2014
I'm running windows 8.0 and recently for some reason my computer's disk usage is constantly running at 100%. It will dip once every minute or so and load whatever I've clicked or typed and then freeze again.
I've looked extensively online and there is no exclusive cause or reason for this and seems to be a very tricky issue but I will explain what I have done so far:
Disabled Supefetch and Windows Search
Ran chkdsk f command numerous times
Disabled and deleted the page file (that was setting limits)
Tried defragging, disabling firewalls, etc.
Made exceptions for some files that may have been causing issues in automatic scans.
Been told numerous times to open Resource Monitor and check what's doing it and there are numerous things running at different times that this occurs, some are: NTFS Free Space Map, NTFS Master File Table, NTUSER.DAT files, random log files. There is no consistency.
Basic specs:
Windows 8.0 64-bit, 8GB Ram
View 8 Replies
View Related
Jan 7, 2014
My Disk Usage and CPU columns of the task manager randomly jump up to 99% or even sometimes 100% which is unresponsive. This seems to happen more often when I run programs such as a malware scanner or League of Legends. My FPS in League stays around 1 when I do try to play and I'm assuming this is a related issue.
View 1 Replies
View Related
May 18, 2013
Dell XPS 12 running Windows 8 x64. Had it for about six weeks, and I had two problems I with it:
- every so often (maybe once a week), when I would turn it on, instead of booting into my normal startup screen, it would say 'Preparing Windows', then boot into, like, a generic account with none of my programs or files or anything... shutting down and restarting fixes that problem. A little annoying, but no big deal.
- every so often (maybe twice a week), I I'd shut it down, and I'd get the BSOD, with 'SESSION_HAS_VALID_POOL_ON_EXIT' given as the problem. I bit of Googling seemed to reveal that this was a fairly common issue with Wi8 on this particular machine, so I never worried too much about it.
I'm describing these problems because they might shed light on the NEWEST problem, which is as follows:
Did a Windows 8 update yesterday, and today I discovered that when I turn the machine on, I get 'To skip disk checking, press any key within 1 second' at the Dell startup screen... I didn't press anything, but it didn't seem to go into disk-check, booting normally into Windows instead. I tried to do a disk check, and right away, it told me 'Windows has found problems with your disk', telling me I had to restart to fix them... so I did, and got the same 'To skip disk checking...' message, followed by an immediate boot into Windows instead of any disk checking. I tried to do a system restore, thinking one of the updates might be causing the problem, but when I try to do a system restore, it tells me that I have to run check-disk first (but every time I do, I get the same routine I just described above).
View 7 Replies
View Related
Sep 25, 2013
I have an ASUS Vivotab running Windows 8. I am seeing that the service process hits 100% disk usage from roughly 4:58PM - 5:04PM daily. I've made sure that my antivirus is't downloading updates or running during that time, same with Windows Update, Live Update, etc. How can I find what specific process is running during that time that is killing the machine given I know when to watch for it?
View 9 Replies
View Related
Jun 22, 2014
First let me say, I rarely leave my 8.1 system running all night as I generally switch off before bed.
On the FEW occasions I leave the system running all night I always get the "Your computer is low on memory" warning.
For instance, yesterday my software RAID mirror was "Re-synchronizing" and I wanted it to complete syncing so I left it running. NOTHING was running except Disk Manager. I closed down everything else. No browser, no Skype, no directory utility, no paint, no uTorrent....
Sure enough when I woke up this morning there it was....
A few days ago I wanted a couple of torrents to keep downloading so I kept the desktop running. Again NOTHING else was running and in the morning there it was....
I have 16Gb of memory and my pagefile.sys is 42Gb. My OS disc is a 250Gb SSD. I have set my system to hibernate after 5 hours idle. I have set the screen/display to sleep after 30 minutes.
The system isn't asleep when I wake as moving the mouse immediately brings the display back on line. Checking Task Manager shows NO memory hogs.
What I suspect is after 5 hours the hibernation process denies access to memory requests or something?
The strange thing is millions of people on 8.1 must leave their systems running all night but I have seen no mention of this behaviour.
View 9 Replies
View Related
Jul 19, 2014
Unable to start Disk Management. I tried the following without success:
- Check file integrity
- Repair with DISM
- Start the Virtual Disk Service and Volume SHadoy Copy manually and set them to Automatic and Manual (it starts, but Disk Management cannot connect to it)
- Disable Firewall and Antivirus
- Verified that my system is malware free
- Tried opening it in Safe Mode
View 5 Replies
View Related
Jun 18, 2014
on my computer with windows 8 format as I am. Dvd format to format I've installed disk, but I erased or something during the installation, format the error output. The computer BEGAN to GIVE the following ERROR :
GIVEN WARNING
Error: no boot disk has been detected or the disk has failed.
</b>
<img class="decoded" alt="http://i.hizliresim.com/W2jNzN.jpg" src="http://i.hizliresim.com/W2jNzN.jpg" />
View 1 Replies
View Related
Jan 9, 2014
I'm running windows 8 on a partition so I use it mostly for gaming. I have 115 GB on the partition, and when I totaled all the files in my Bootcamp drive it comes to a total of about 80 GB, 50 from games, 20 from the OS. However, I'm constantly getting error messages saying that my disk is almost full and that 105 gigabytes have been used. I've tried CCleaner and disk cleanup but nothing big is found. So why would it be using space greater than what can be seen in the disk when using explorer and is there any way to fix this error (if it is one)?
View 5 Replies
View Related
Dec 28, 2012
Is it still possible to bring a disk offline using Disk Management (diskmgmt.msc) in Windows 8 the same way it was possible in Windows 7 or is using Diskpart.exe the only way?
View 5 Replies
View Related
Feb 10, 2014
My hard disk crashed. I have a recovery cd created on the time of purchase. I bought a new hard disk for this purpose. Now when I am trying to recover from the same cd it is getting stuck at 40 % showing error. I searched for this error and got something as such recovery disk can work on OEM hd. As my old hd has crashed how can I recover over there. Is there any system that dell provide me with necessary operating system so that atleast I can use my system.
View 7 Replies
View Related
May 7, 2014
so a few years ago i bought this pc and as Always i make 2 partitions one for backup and the other for windows and all the other stuff.
So today i wanted to reinstall windows because the Disk 0 partition fitness was 0% and randomly freezing. as my other half was like 70-80% fitness (rated by Speedfan). But this never happened to me, usually Partition C and D Always were on the same "disk #" and now they are separated and i just cant get them back.
now i want to put them back together and make one whole HDD, any way to get them back to eachother?
with this ill add some pictures, since a picture says more than 1000 words.And Edit, maybe usefull. i've noticed my partitions turned into 2 different "bus numbers" Bus number 0 and bus number 1
View 9 Replies
View Related
Aug 26, 2013
I originally built my computer with two 1 TB hdd as RAID1 with Windows 8 Pro 64 Bit as the OS.
The boot files eventually became corrupted. I could not reinstall Windows 8 on the RAID 1 array. So I then purchased two 2 TB HDD and created a new RAID 1 array which Windows 8 readily loaded onto.
I then added the two original 1 TB HDD to the computed to use for photography and media storage. They also showed when booting my computer as a separate RAID 1 array, but were listed as "repair." I went into the RAID BIOS and separated the array. I connected only one of the 1 TB HDD, and the drive was the "E" Drive in my computer, but I was unable to access it. "E: is not accessible. Access is denied." Disk Management showed the drive as DISK 1, but as two partitions: System Reserved 350 MB NTFS Healthy (Active, Primary Partition) and 931.17 GB NTFS Healthy (Primary Partition). I used Diskpart to create a Primary partition and format the disk. That HDD now works fine. Unfortunately I did not backup the data on that HDD, which I would like to have.
I did try the second mirrowed 1 TB HDD on the computer before formatting the first and was able to access all of the data on the HDD.
Now after formatting the first 1 TB HDD, I added the second 1 TB HDD from the original RAID 1 array back onto the computer, wanting to retrieve the data on it. This HDD does not show on My computer and is not assigned a drive letter. However the HDD is listed in Disk Management as DISK 2 and partitioned into System Reserved 350 MB NTFS Healthy ( active, Primary Partition) and 931.17 GB NTFS Healthy (Primary Partition). Looking for retrieving the data on this disk, copying it to another HDD, and then creating one partition on this HDD? How to assign the HDD a drive letter. I would like to format this HDD after copying the data, and have my computer assign it a drive letter so that I can use it.
View 2 Replies
View Related
Jul 22, 2013
When i convert the disk says that the disk needs to be formatted.Does that format everything or only not the windows files (so the vital-to-run files )??
View 3 Replies
View Related
Nov 29, 2012
I recently got windows 8. But I am not sure what bit and processor I have? This is an image of what i have and the system properties dialog.
View 4 Replies
View Related
Feb 26, 2014
I have a 500 GB hard drive. The windows partition -60 GB- is running out of free space (only 13 GB is free after cleaning up and so) and the performance is going down . I want to increase the capacity of my C partition without losing data -i mean decreasing the size of the other partition and adding some capacity to C ....
View 5 Replies
View Related
Dec 1, 2013
I realize that the Pro version of Malwarebytes should not be running on Windows 8 if you have Windows Defender running. But am I correct in understanding that there will be no problem with the free version of Malwarebytes since it does not have a firewall?
View 9 Replies
View Related
Jun 9, 2014
I am currently running Windows 8.1 pro, and I wanted to partition my main drive which is the C: Drive and on that partition run Windows 7 Ultimate.
How to partition the drive in Windows 8.1 but when it comes to doing a dual boot everything I have come across says I need to have Windows 7 installed first then I can add Windows 8.1.
There has to be a way to Run Windows 7 from Windows 8.1 on a dual boot or multi-boot as Windows 8.1 is my main and only OS I am running right now.
View 7 Replies
View Related
Feb 10, 2014
In order to run Corel Draw X6 I need a service to run in the background, called PSI-SVC-2, also known as Protexis Licencing V2.
Under Task Manager/Services it's always default set to "Stopped". No matter how many times I set it to start automatically, it always resets to Manual after a restart.
Is there another tweak I need to make to have this particular service run on reboot?
Operating System: Windows 8.1 64-bit (6.3, Build 9600) (9600.winblue_gdr.131030-1505)
Language: English (Regional Setting: English)
System Manufacturer: TOSHIBA
System Model: Satellite L875D
BIOS: 6.10
Processor: AMD A6-4400M APU with Radeon(tm) HD Graphics (2 CPUs), ~2.7GHz
Memory: 16384MB RAM
Available OS Memory: 15836MB RAM
Page File: 3383MB used, 14885MB available
Windows Dir: C:WINDOWS
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: 96 DPI (100 percent)
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.03.9600.16384 64bit Unicode
View 6 Replies
View Related
Apr 27, 2014
My Windows 8.1 PC is fully updated.
I do not have any Hard Drives or Partitions set to be searched in the Drive Properties dialogue box, so why is Searchindexer running all the time and using RAM?
View 4 Replies
View Related
Jul 8, 2014
I accidentally set the file open of .bat files to Notepad. From a link in this forum (How to Restore Default File Extension Type Associations in Windows 8 and 8.1)was able to reset the registry back I think. The bat file not longer asks for notepad but instead opens "How do you want to open this file" and ask me to look for an app. The batch files still do not run.
View 8 Replies
View Related
Mar 29, 2014
I followed the tutorial on this site for scannow. When completed (no errors), I typed exit at the command prompt. I have only a blank screen with functioning mouse pointer. When restarting I get the hp logo, then the windows "please wait" icon for about one second then it goes black. I originally cloned windows from my sea gate 1Tb hhd to the toshiba ssd. I can boot from the hhd with no issues. Just won't boot from ssd. I would run the recovery disc but it claims I need 140 Gb to do so and I only have 128Gb.
View 2 Replies
View Related
Jul 4, 2013
I checked my task manager earlier, and it showed 2 Task Schedulers running at the same time. Then, I just checked again and there is a third.
View 1 Replies
View Related
Mar 16, 2013
Attempting to print from photo gallery, it complains that I am out of memory, nothing else is open and I have 1.5G RAM let to utilise.
See screenshot attached of the error.
It also has an issue generating the preview when pressing print. I assume the 2 errors are symptoms of the same underlying problem.
I think this might be something to do with printer drivers? Do I need to re-install these?
View 1 Replies
View Related
Sep 15, 2011
how to get Windows 8 running properly on a MacBook Pro (or in general any Mac that supports BootCamp).
Everything runs kind of smoothly, except since Apple doesn't "Officially Support" Windows 8, out of the gate I wasn't able to get a few things working. Unfortunately, the driver disc that Apple provides to you doesn't install officially because I was "not running Windows 7."
I am using a MacBook Pro, early 2010. 2.4ghz Core2Duo, 4gb of RAM and a 1tb HDD.
Not working
Volume Buttons
Brightness Buttons
Eject button
2-Finger Scroll
I'll update later once I am out of class, but those are some things I've run into.
View 9 Replies
View Related
Apr 23, 2013
I had Spotify running then it stopped. I uninstalled it and reinstalled it and it wouldn't install. I set myself up as Administrator, uninstalled it, attempted to reinstall it and this is what I get:
Problem signature:
Problem Event Name: APPCRASH
Application Name: Spotify.exe
Application Version: 0.9.0.117
Application Timestamp: 51667286
Fault Module Name: USER32.dll
[Code] ....
Does this have anything to do with 32/64 bit processing?
View 2 Replies
View Related
Sep 11, 2013
I have had some issues with my laptop running very hot even when it's not used. I figured out that it was because of my cpu running at around 80% all the time. This of course, is causing a cpu idle temp of around 65c and a quickly depleted battery.
The computer (a Sony VAIO SVS1513C5E) have two modes (Stamina and speed) that switches between silence mode (low effect and integrated graphics) and high performance mode (hybrid graphics, high performance). CPU temp is at 65c when running in 'silence' mode (can't say that it is very silent, given the fanspeed to cool down the computer). High performance increases this to 75c (still idling!), and increases the fan volume by quite a lot.
I did scan it with windows defender, without anything coming up. I am also running process explorer at the moment, it says that system is using ~20% cpu, services.exe a tad above 20% and around 20% idle. The rest of the processes are using a total of around 2-3%, leaving 37% (?). The 20% from services.exe seems to be mostly svchost and some intel bluethoot driver (that I will be uninstalling, as I dont use bluethoot anyways).
View 2 Replies
View Related
Dec 13, 2013
Running Windows 8.1 and apps are not working. They were perfectly fine this morning, then later today, every one of them, except like two that I know of, IE and the Store. Other than that, music, Facebook, twitter, dropbox, etc. they're not working.
I've refreshed my Windows 8, didn't fix it. I've also done sfc /scannow and it found nothing wrong.
View 3 Replies
View Related
May 27, 2014
Running Win 8.1 on HP laptop.
Task Manager shows Disk at 100% but only a couple on tasks show any HDD activity.
I assume that there are hidden processing eating up my HDD (and CPU).
How do I see what else is running?
View 14 Replies
View Related
Dec 9, 2013
Today I got an IO error when trying to upload a song to a music site. After doing research it said to run a test on command. Once I restarted my laptop it stated scanning and tunnibg. My computer went to safe mode but would not come out if it. I had no choice but to press down the power button. I tied it back on and it ran again. After 10mintues it went to 27% and stayed there for an hour. Now it went to sleep mode again. I don't know what yo do. I can't stare at the computer for ever to keep it from not going to sleep mode. My laptop is a year old and is an HP.
View 1 Replies
View Related