Maintenance :: CPU Running At 80% When Computer Is Idling
Sep 11, 2013
I have had some issues with my laptop running very hot even when it's not used. I figured out that it was because of my cpu running at around 80% all the time. This of course, is causing a cpu idle temp of around 65c and a quickly depleted battery.
The computer (a Sony VAIO SVS1513C5E) have two modes (Stamina and speed) that switches between silence mode (low effect and integrated graphics) and high performance mode (hybrid graphics, high performance). CPU temp is at 65c when running in 'silence' mode (can't say that it is very silent, given the fanspeed to cool down the computer). High performance increases this to 75c (still idling!), and increases the fan volume by quite a lot.
I did scan it with windows defender, without anything coming up. I am also running process explorer at the moment, it says that system is using ~20% cpu, services.exe a tad above 20% and around 20% idle. The rest of the processes are using a total of around 2-3%, leaving 37% (?). The 20% from services.exe seems to be mostly svchost and some intel bluethoot driver (that I will be uninstalling, as I dont use bluethoot anyways).
View 2 Replies
ADVERTISEMENT
Jun 26, 2014
Lately my computer has been distorting sounds and been going slower than it used to. When I restart the computer, the amount of distortions/small sizzling sounds is at a minimum, but it increases as I continue to use the computer. I googled how to fix this and one of the suggestions was to run a system file checker. The result of the scan was that I have some corrupted files that the computer could not remove. I also go a sfcdetails.txt file that showed all the information in the scan. How to find the corrupted files/what I should do to remove the files. I have attached the sfcdetails.txt file and a screen shot of the SFC results right from the command prompt.
View 3 Replies
View Related
Jun 22, 2014
First let me say, I rarely leave my 8.1 system running all night as I generally switch off before bed.
On the FEW occasions I leave the system running all night I always get the "Your computer is low on memory" warning.
For instance, yesterday my software RAID mirror was "Re-synchronizing" and I wanted it to complete syncing so I left it running. NOTHING was running except Disk Manager. I closed down everything else. No browser, no Skype, no directory utility, no paint, no uTorrent....
Sure enough when I woke up this morning there it was....
A few days ago I wanted a couple of torrents to keep downloading so I kept the desktop running. Again NOTHING else was running and in the morning there it was....
I have 16Gb of memory and my pagefile.sys is 42Gb. My OS disc is a 250Gb SSD. I have set my system to hibernate after 5 hours idle. I have set the screen/display to sleep after 30 minutes.
The system isn't asleep when I wake as moving the mouse immediately brings the display back on line. Checking Task Manager shows NO memory hogs.
What I suspect is after 5 hours the hibernation process denies access to memory requests or something?
The strange thing is millions of people on 8.1 must leave their systems running all night but I have seen no mention of this behaviour.
View 9 Replies
View Related
Feb 5, 2014
I bought this laptop October-13 with Windows 8 preinstalled. It had a few hiccups after the first month, but its just been getting worse and worse. Sometimes it will just freeze, other times it will freeze and BSOD. And its always a kernel_data_inpage_error. It happens pretty much while doing anything else then playing games, especially when playing video, be it streaming or local files.
View 3 Replies
View Related
Jan 18, 2014
Recently lost my mobo due to a power surge no drives detected dead screen. i have a SATA to usb and can see my drive, and data is in tact but when i try to boot in the new computer (system recognizes drive) i get a( to quick to read message) something about the pc i think the issue is the computer im trying to put this drive in is about 3 years younger than the computer the drive was running in. when i use the win 8 recovery on a flash it loops. while running the flash quick message about pc(it does read from the flash but then fails) i was able to use the flash to load 8 on a formatted drive(in this computer) worked fine. and will use as a last resort but would really like to, of course keep all my drivers and settings and software settings etc
View 5 Replies
View Related
Jan 2, 2014
my Gateway SX 2370 shutted down during system restore and now my computer keeps running automatic repair. And I getting tired of this continuous operation....
View 1 Replies
View Related
Feb 1, 2014
I'm running windows 8.0 and recently for some reason my computer's disk usage is constantly running at 100%. It will dip once every minute or so and load whatever I've clicked or typed and then freeze again.
I've looked extensively online and there is no exclusive cause or reason for this and seems to be a very tricky issue but I will explain what I have done so far:
Disabled Supefetch and Windows Search
Ran chkdsk f command numerous times
Disabled and deleted the page file (that was setting limits)
Tried defragging, disabling firewalls, etc.
Made exceptions for some files that may have been causing issues in automatic scans.
Been told numerous times to open Resource Monitor and check what's doing it and there are numerous things running at different times that this occurs, some are: NTFS Free Space Map, NTFS Master File Table, NTUSER.DAT files, random log files. There is no consistency.
Basic specs:
Windows 8.0 64-bit, 8GB Ram
View 8 Replies
View Related
Jun 9, 2014
I have currently been experiencing a new problem with my PC. This problem occurs when I am running any game on my computer. When running a game for a few minutes, my tower begins to make a loud noise, which I assume is caused by the fans spinning faster and faster inside, then my display monitor goes black but then notifies me with a "no signal" message. While this is happening, my tower is still on as the power button still has back lighting, in fact the back lighting never disappears unless I physically have to turn my PC off.
I would say I have been experiencing this problem fairly recently - about a week ago this problem arose. The reboot only ever occurs when I am running a game and not when I am browsing the internet, watching videos, running other programs like Word or Skype etc...
The games I am running also had the video settings on high and I have noticed that when I put the video settings on low it buys me a little more time before my system reboots.
XML view
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />
<EventID>41</EventID>
<Version>3</Version>
[code]...
View 1 Replies
View Related
Sep 17, 2014
I have a problem trying to remove istarsurf from a friends computer running windows 8.1
I have tried just about everything to get rid of it and it just wont budge, I have tried the following:
Ran virus scan
Ran malwarebytes
Uninstalled any suspicious programs
Reset explorer
Tried to delete the reg key but not showing up there either.
Ran adwcleaner- didn't find anything.
I have tried to restore pc to any eiriler point and nothing---its telling me my C; is corrupt but when i rum a CHKDSK there is no errors.
I have done all the obvious and now im out of options,
View 3 Replies
View Related
Jun 21, 2014
I have Automatic Scheduled Maintenance set to run at 3:00AM. I get to this setting by going to Control Panel > Action Center > Maintenance > Change maintenance settings. I also have the box for "Allow scheduled maintenance to wake up my computer" checked.
However, I note that if I put my computer to sleep for a few days, when I wake it back up, Automatic Scheduled Maintenance has NOT run. I can tell this because my antivirus definitions are out-of-date and haven't been updated since I put the computer to sleep.
how to figure why it's not waking up for Scheduled Maintenance? Is it possibly a BIOS setting? Do I have to manually add it to Task Scheduler? I'm running Windows 8.1 Update 1, ASRock Z87E-ITX mobo, Intel i7-4770S CPU, Samsung 840 EVO mSATA SSD, 16GB RAM.
View 4 Replies
View Related
Nov 3, 2013
I've updated my laptop's OS to Windows 8 64-bit a couple of days ago and I quickly noticed that there was a rather annoying issue with performance. It lags every 5-10 seconds, but this seems to happen only when I open Firefox or any other Web Browser and this slows down the whole computer unless I restart it again. My Laptop used to run Windows 7 very well. I also updated to Windows 8.1 yesterday but the problem is still unsolved. By the way I have 4GB of RAM but the system recognizes only 2.
View 9 Replies
View Related
Jun 17, 2014
I have an issue that has been happening since last week i think. The problem is that even with the computer in idle the disk usage has these spikes. When i want to play a simple .mp4 file it freezes several times and the all computer freezes when the spikes reach 100 %. I don't know what is causing this issue.
View 9 Replies
View Related
Oct 29, 2012
I'm running into a really annoying issue after upgrading from Windows 7 to Windows 8.
I first noticed it during the initial (clean) install; when the installer tried to reboot, my machine (an acer aspire 4755G) just hung after the initial shutdown. That is, after the screen turns off, the power lights and fans are still running, and the machine itself doesn't restart. (I let it sit for a good 15 minutes, and it still didn't change).
I managed to do a hard reset (power button for 5 seconds) and the install finished, but every shutdown/restart has been like that. Interestingly enough, hibernate works just fine.
I've looked at other solutions where it said to use the "bcdedit /set disabledynamictick yes" command, and that didn't work.
I also turned off the "Fast Boot" option in the power settings menu. That didn't work either. So far, the only option is to do the hard shut down by holding down the power button, but that proves to be horribly inconvenient.
I've also updated all my drivers to the proprietary onces given by Acer, yet this problem still persists! It worked fine on Windows 7, so I'm not sure what went wrong here.
View 9 Replies
View Related
Jun 26, 2014
Recently I got problems when running SFC or DISM to repair my system. As far as I know it concerns the shortcuts in the folder Administrative Tools, there I changed under Properties the Run option to Maximised Windows and since then SFC and DISM have shown this error that the services are unable to download the proper source files (they admonish a mismatch I cannot correct).
I am running a Windows 8.1 Update 1 system without the Pro version, so I have no access to its exclusive features. I attach the corresponding log files after a run of DISM and SFC for more infos.
View 2 Replies
View Related
Apr 19, 2013
Having a problem with the Regular Maintenance waking the computer (Windows 8 on a Lenovo Q-190) to do its scheduled task as it's supposed to do. Here are the symptoms:
1. If I change the time for Scheduled Maintenance in the Action Center (Change Maintenance Settings), it WILL be reflected properly in the Properties of the Regular Maintenance Task in Task Scheduler.
2. However, if I check the box for "Allow scheduled maintenance to wake up my computer at the scheduled time" in the Action Center (Change Maintenance Settings), it WILL NOT reflect in the Properties of the Regular Maintenance Task in Task Schedular. Specially, I check the box to wake up my computer in the Action Center Maintenance Settings, but the corresponding checkmark is NOT reflected ("Wake the computer to run this task"), in the properties of the actual task in Task Scheduler.
3. I then put the checkmark directly in the Regular Maintenance Task itself ("Wake the computer to run this task"). However, at some point in the future, (not right away; I close and then reopen the task to make sure that it 'sticks'), the checkmark "disappears. Then, the task does not run at night while the computer is asleep, but runs in the morning when I wake the computer for regular use. At that point, the checkmark in the task is gone.
View 6 Replies
View Related
May 14, 2014
Over a month ago, I noticed that my system had started to become very slow, taking a long time to switch between apps, or between tabs in Chrome (even with only a few tabs open).
I've constantly had Resource Monitor open to try and track down the source of the problem. Initially, I thought this was a problem with Chrome or my pagefile, because Chrome was often at/near the top of Disk Activity, manipulating pagefile.sys. However, it seems like the amount of data being manipulated isn't very large; typically well below 1 MB/sec. I tried moving my pagefile to a secondary hard drive to no effect.
I've downloaded and run multiple programs to check hard drive health, and none of them have found any problems. I'm not talking about simple S.M.A.R.T. diagnostics, but in-depth scans.
Thinking that it might be a problem with Windows 7 at the time, I wiped the drive and installed Windows 8.1. I installed the latest motherboard drivers and disabled Windows search and file indexing. The problem remains. The fact that the problem persists after wiping the drive had me thinking it's likely a hardware problem. Alas, various hard drive scanners haven't found a problem.
I have 8GB of memory; rarely is more than 4GB ever in use. Both of my hard drives have plenty of free space (400+ GB each).
View 6 Replies
View Related
Jan 7, 2014
My Disk Usage and CPU columns of the task manager randomly jump up to 99% or even sometimes 100% which is unresponsive. This seems to happen more often when I run programs such as a malware scanner or League of Legends. My FPS in League stays around 1 when I do try to play and I'm assuming this is a related issue.
View 1 Replies
View Related
Jun 22, 2014
I have a laptop running Windows 8.1 and the start up has become very slow. Glary Utilities tells me it took 2m39s and only 1% of users are slower. I've tried cleaning it with CCleaner and Glary, removing unnecessary start up items and defragging.
View 1 Replies
View Related
Mar 5, 2013
About 1-2 weeks ago, I had 15GB of space left on my SSD that is solely committed to OS and drivers. Today, I have 2.9GB left. I have downloaded nothing, and I have changed nothing. take a closer look at why my SSD space is disappearing? I've had this OS for 2 months now and it wasn't a problem until recently.
SpaceSniffer Details:
Code: C: [35.2Gb] [ 6.3Gb] hiberfil.sys [ 4.3Gb] pagefile.sys [ 256Mb] swapfile.sys [ 392Kb] bootmgr [ 4Kb] BOOTNXTC:Windows [18.7Gb] [ 2.2Mb] explorer.exe [ 1.9Mb] RtlExUpd.dll [ 864Kb]
[Code]....
View 9 Replies
View Related
Sep 15, 2014
I ran SFC and it complained that some corrupt files could not be repaired.
Here's the relevant part of the log:
Code:
2014-09-17 00:06:45, Info
CSI 00000520 [SR] Verifying 100 (0x0000000000000064) components2014-09-17 00:06:45, Info
CSI 00000521 [SR] Beginning Verify and Repair transaction2014-09-17 00:06:46, Info
CSI 00000522 Hashes for file member
[Code] .......
View 2 Replies
View Related
Jul 2, 2013
After around 5 minutes of my system sitting idle, MsMpEng.exe kicks in running about 50% CPU and keeps running until I start using my laptop again. How to stop it doing it.
View 2 Replies
View Related
Feb 2, 2013
I am using windows 8 on my laptop (samsung np550p5c-s03). The task manager shows memory usage around 70% (5.6 GB of 7.9 GB) even when I have no apps running.
View 4 Replies
View Related
Apr 13, 2013
Running a family PC, with different user login's. Users is leaving the PC even sometimes after logoff not putting the PC to sleep or switching on the PC, do not log in and leaves the PC running. (training of users, no result).
Task: Ensure the PC goes to sleep within reasonable time.
Sleep settings does not seem to work after user logoff. (3 different login profiles) all set to same standard "balanced" scheme. The standard scheme is changed/set to HDD off 20min, sleep 20 min, hibernate 240min.
A small app is called by screen saver logs the user off after 15 min inactivity with a 1 min warning screen. All working fine with logoff etc.
I had hoped the adjusted standard settings "balanced" was cascaded to the "logoff" state, but it seems to run it's own life after logoff, meaning the PC keeps running (screen goes black as set in the "standard scheme) however the power settings is not putting it to sleep, it takes hours...
The Ethernet card "hard wire" is set to not wake, the wireless adapter is disabled, lock screen is disabled.
Have also tried in the registry to set all default user schemes to = 5 (this was working in XP after logoff) but seems to have no effect in Windows 8. I'm not having Windows 8 pro, so GPO is not an option.
Here comes the questions:
Case, after logoff I want the PC to sleep after 20 min.
Where is the settings for "logoff" state (i.e. no user logged in and after user logoff) in the registry
How to changed the setting in the registry, meaning Dword, name, value for 20 min to sleep
View 2 Replies
View Related
Apr 24, 2014
A couple of days ago, my HP Pavilion g7-2233cl laptop, running Windows 8, started looping at startup. I shot a brief video showing a few loops and posted it on YouTube: [URL] ....
Because of the looping, I am unable to input any commands through my keyboard or mouse once the looping starts. So, for example, I cannot get to Control Panel.
I was, however, able to click on Escape during a startup and run a hardware diagnostic. No hardware problems were found.
Sometimes, after looping for quite a while, the computer freezes up. It stops looping but then won't let me do anything else either.
This problem does NOT seem the same as the "Automatic Repair" issue I have seen described on YouTube. By the way, I also have Windows 8 running on a desktop computer.
View 1 Replies
View Related
Feb 4, 2013
I have a Lenovo Z580 running Windows 8 on a 256 GB SSD, which was cloned from the original drive using Paragon cloning software. I got the computer up and running about a month ago, and I started personalizing it by installing programs and such. At the beginning of today, I probably had around 25 GBs left of storage, which may not seem like much but it will last me until I need to be done with this computer.
Today I went to download a 5 GB zipped folder used to install MATLAB via a licensed, legit website (student license). I check after it downloads and I have roughly 20 GB left on my disk. Note that every other program I have installed has had no trouble with Windows 8 (including Mathematica), so I assumed MATLAB wouldn't either. I hit the setup button, and nothing seems to come up. I hit it again and this time it says something like "not allowed to create destination." So then I tried cutting and pasting it to the desktop, but there was some error with that too. I tried to use the setup application in other ways, and it still didn't work.
I then checked my free disk space and I had 100 MB of free space left. Uhm WHAT?! What the hell just happened?! I search through pretty much ALL my file folders to see what was newly written and see if I could find a TWENTY GIGABYTE folder that was created today. I couldn't find anything. What I think happened was that the setup application unpacked a bunch of files from the compressed folder SOMEWHERE on my disk, EACH TIME I hit setup. THEN it would hit a snag, for some reason, and stop the setup, and NOT delete the temporary files.
SO my next step was to use the "Disk Cleanup" option, to see if the theoretical temporary files could be deleted that way. It gets to the list and I discover that the "Temporary files" option is an INCREDIBLE 98.6 GB size. UHM WHAT?! How is it possible that my OS thinks it can safely delete nearly 100 GBs of data off my 256 GB hard drive?! What is it deleting exactly? Let's assume that 20 GB was in there; that still means it's deleting almost 80 GBs. I couldn't believe that. So obviously I haven't deleted that yet, because I fear that it thinks some of my programs, or maybe even the OS itself, is a bunch of temporary files. I don't even know. I do have a 30 GB recovery partition, so maybe that 30 is included in that, but EVEN THEN 50 GBs is a TON to be in temporary files.
My question: is there any way to check what will be deleted in the option "Temporary files" and why is my temporary files 38% of my entire drive? Also, what happened with the 20 GBs?
I labelled it urgent because I need to install MATLAB to use it for HW, but I can't. Well I think I can find another way to use it, however I still need this problem fixed ASAP because I need space on my computer to do stuff in general.
View 4 Replies
View Related
Sep 25, 2013
I have an ASUS Vivotab running Windows 8. I am seeing that the service process hits 100% disk usage from roughly 4:58PM - 5:04PM daily. I've made sure that my antivirus is't downloading updates or running during that time, same with Windows Update, Live Update, etc. How can I find what specific process is running during that time that is killing the machine given I know when to watch for it?
View 9 Replies
View Related
Sep 20, 2013
How do I get my computer to Hibernate. The power options only allow for shut down, reboot, and sleep... I know there is a way
View 4 Replies
View Related
Mar 4, 2014
I recently built my fourth computer with the following components:
Case: Thermaltake Soprano Mid-Tower VO900M1N2N
MOBO: ASUS Z-87 Deluxe/Quad
CPU: Intel i7-4770K (Haswell)
Memory: Crucial Ballistix Sport 16GB Kit (8GBx2) DDR3 1600
PSU: Cooler Master Silent Pro Gold 800W
HD: Samsung 840 EVO 1TB
GPU: ASUS Radeon HD7790
Logitech MX3000 Wireless Keyboard & Mouse Combo
The operating system is Windows 8.1 Pro (clean install on the SSD). The system is so fast and awesome that it refuses to shut down. It makes no difference how I shutdown, it restarts in about 3 seconds. I have to physically cut power to the PSU to shut it down. I have updated all the device drivers and have the latest BIOS (version 1707) according to the ASUS website. I
As a troubleshooting measure, I also did a clean install of Windows 8.1 (not Pro version) on a 250 GB WD HD without the MOBO and GPU drivers and booted with only this HD (all other storage devices unplugged). The same problem persists so I believe it is a BIOS setting or a motherboard problem. I am using the default BIOS settings without overclocking the CPU.
View 2 Replies
View Related
Aug 6, 2014
My computer freezes randomly when I am using multiple programs. For example Photoshop and Chrome. Fortunately it doesn't happen all the time. But is it is still very annonying. I think the problem is driver related but I'm not sure. It has never happend when playing games.
Symptons: Freeze/Lockup. Cannot control the mouse. The only thing I can do when it happens is to hold the power button.
Information:
- Computer: Alienware 17 Laptop
- OS: Windows 8.1
- Attachment: Event Viewer administrative logs- Do you need more information?
View 8 Replies
View Related
Mar 18, 2014
It happens when I want to alt tab. Somehow my laptop just sleep like that. Left alt button to be exact...
View 1 Replies
View Related
Jun 11, 2013
On my power plan I have this settings:
Turn Of display: 5 minutes
Sleep: Slepp After: Never.
This settings are equal in battery mode and plugged in.
The problem is that the computer enters in sleep when the display is turned off (after the 5 minutes)
View 1 Replies
View Related
