Used Remain 12 Gb For Storage / As Working Area For Products Without Compromising Ready Boost?

Jan 28, 2012

I have Windows 7 64 bit and 8 gb ram (the most that the MB will accept. I had a spare 16gb ready boost compatiable USB drive and used it for Ready Boost. Seems a little bit quicker. My question is this: ReabyBoost is addressing 4 GB of the 16gb. I think this is all it is supposed to do. Can I used the remain 12 gb for storage or as a working area for products without compromising Ready boost?

View 4 Replies


ADVERTISEMENT

Use Ready Boost On HDD?

Jun 14, 2012

Can i enable ready boost on my hard drive to speed up my system ?

View 2 Replies View Related

USB Dedicated To Ready Boost

Feb 15, 2011

On my HP G50-112NR Notebook, 32bit, I inserted a 16G Verbatim USB flash drive to learn about ReadyBoost. I clicked on "Dedicate this device to ReadyBoost," thinking that I could change my mind later and "undo" it. I can't!! The USB had a few files on it & Properties shows they are still there. Device Manager says the USB is working properly. But when I try to "Open" the drive, the resulting window says it's empty. I have tried clicking "Do not use. . ." but nothing happens. I want to Undo the ReadyBoost "dedication" & restore the USB to normal use. How do I do that? (Unless I receive some good advice, I'm going to Format the USB).

View 6 Replies View Related

How To Turn Off Ready Boost

Sep 1, 2012

Ive turned it off before, but now not giving me the option. Under general/propertys/readyboost its not giving me do not use devise/dedicate devise/use devise. Its using all my F drive space for readyboost yet tells me because of writer protection it can't be used, so where's my 4 GB's

View 5 Replies View Related

Windows 7 Ready Boost?

Sep 12, 2009

I've read about how Windows 7 is suppose to actually use readyboost. I have a spare 8GB Microcenter SD card. It's rated class 6.to use this on my computer? Should I go ahead and dedicate the entire 8GB?

View 10 Replies View Related

Using 74GB SSD For Ready Boost Efficient?

Apr 15, 2012

I have an 80GB of course 74GB after formatted to NTFS.

I have too much crap on my system to use it as my primary drive. I don't feel like fighting for disk space at the end.

I was thinking of using the SSD drive for ReadyBoost and VM's. I am using Windows 7 x64 Ultimate.

View 2 Replies View Related

Ready Boost Substitute Software

Jan 16, 2012

Ready boost substitute software

View 1 Replies View Related

Windows 7 SP1 X64 And Ready-boost Flash Drive?

Oct 11, 2011

I am using this little rinky-dink $9.00 PNY slider drive that my wife bought because she thought it was pretty, well little ole' me has now gone through 4 of the "fastest" flash drives on the market, the Sandisk Cruiser, the OCZ Rally 2, the Corsair Voyager and another larger PNY. None of them rate more than half the speed of this little slider flash drive. I consistently get 30W and 20R on all programs I try to test it with. Other Tests show much higher result too but let's just stick with the R/W for now.BTW, I also tried the Patriot XT Xtreme series but according to the manufacturer's it is not compatible with either Acronis products or Adobe, after hours and hours with tech support and 3 different drive we figured this out. The programs only work right if the drive is unplugged.

View 3 Replies View Related

SD Card Ready-boost Compatible Windows 7

Apr 26, 2012

what sd card can I use for readyboost in win 7

View 2 Replies View Related

USB Mass-storage Slow To Be Ready For Access?

May 18, 2011

I've been through a very singular problem for the last few days.My Windows 7 suddenly become slow to make USB Mass storage devices ready to access, but this happens only the first time I connect them on my computer.If I start the computer and connect the USB Mass storage device (that was recognized a long time ago) it takes almost 1 minute to be ready for use... After that, every USB Mass storage device that I connect to the computer opens almost instantly.If I restart the computer, the same thing happens. I've tried to reinstall drivers, to disable security, looke for a service that controls it, verified the power options and verified every hardware.

View 5 Replies View Related

Boost Pc For Windows 7 Not Working

Mar 16, 2011

I used Bost my Pc to increase my Pc's ram. Later formatted the flash drive but now it doesn't work anymore but just some errors. The drive besides that works perfectly.

View 1 Replies View Related

Intel Turbo Boost Overclocking Not Working

Sep 2, 2012

I have an Acer Aspire 7745g laptop, 8gb ram, ati 5650m graphics card, and an i5 460M dual core with hyperthreading, clock speed 2.53 ghz and Windows 7 64 bit When playing games like BF3, I notice that the processor is close to 100%, usually between 90% and sometimes going to 100%. I was wondering why Intel Turbo boost never kicks in, it says with turbo boost my cpu can go up to 2.8 ghz, but it always stays at 2.53 whenever I check on the turbo boost monitor

View 5 Replies View Related

Can't Install Adobe Products?

Mar 25, 2012

I am using a windows8 x64 version.i installed 3ds max and worked well for days, but now when i open it it says 3ds max has stopped working.Also when i install adobe cs5 suite some applications were unable to install.. I also tried installing after effects cs4.. but at middle of installation it says after effect has stopped working.

View 2 Replies View Related

Local Area Connection Is Not Working Properly?

May 11, 2012

i received this message" local area connection is not working properly, wireless capability is turned off" how can i fix this?im using windows 7 professional 64 bit...

View 7 Replies View Related

Windows 7 - Cannot Enable Updates For Other Microsoft Products

Nov 26, 2012

I just reinstalled Windows 7 on a asus eeepc 1005pe. I modified the iso with rt7lite and removed some components (like multi-media in IE). I wanted to make it lighter, as this is a pretty crappy PC. Anyhow. I installed, all is working fine. No bugs/problems, except for the fact I cannot enable updates for other microsoft products. When I click on 'find out more' nothing happens.. no response.

MGADiagtool report here > cannot enable updates for other microsoft products

View 4 Replies View Related

Intel Rapid Storage Technology Has Stopped Working

Oct 23, 2011

I received this message today on my screen. I went to Intel but could not understand what they were telling me to do something about BIOS nnd Sata and now I'm lost. My computer has just slowed down to a crawl these last 4 or 5 days, could this be the problem. I'm a novice and quite lost. My browsers and mail programs are working at a crawl.

View 1 Replies View Related

Intel Rapid Storage Technology Not Working / Windows Non Responsive

Dec 19, 2012

My Windows 7 is running slow however it is different from simply lagging. The mouse works fine however clicking on applications does not bring them up. The only difference I can see is an error message coming up saying "Intel Rapid Storage Technology not working". Any ideas on what I should do or extra information you require?

View 1 Replies View Related

LED Lights Remain On

Feb 9, 2013

LED lights 2, 4, 5 and 6 remain on. All others are off. What does this mean? Will not power up.

View 1 Replies View Related

Power Settings Remain Same Regardless Of Set Interval

Jan 8, 2012

Regardless of the interval I set in Power management, the screen always dims at 20 minutes and the machine goes to sleep at 30 minutes. Always, regardless of setting. [Windows 7 Pro 64-bit SP-1]

View 6 Replies View Related

Program Folders Remain Even After An Uninstall?

Jun 16, 2012

so i had a couple programs uninstalled from the MS controll panel add/remove and some of them showed a clean uninstall but i still see them on the list and i also see the folders in the program files .the folders still contain a bunch of files. is there a way to officially remove everything ? im not too familier with deleting?

View 3 Replies View Related

Get The Cursor Change To Remain Permanent?

Aug 10, 2011

My cursor wont stay as selected in windows mouse pointer configuration settings. It reverts to a gray box with a black border, blue up-down arrow in the upper right corner, and a portion of a finger in the lower right corner. I can't find a cursor file that is associated with this stubborn cursor, and I need to find out what the file is that is associated with this so I can DELETE it.

View 3 Replies View Related

USB Mass Storage Device Will Not Recognize External Storage Devices?

Oct 14, 2011

Keyboard and mouse drivers unaffected.USB Mass storage device properties messagewith driver check on:"Windows cannot verify the digital signature for the drivers required for this device."with driver check off:Tells me drivers are corrupt or missing.Search show diver where it should be:C:\Windows\System32\drivers\usbstor.sys (also usbfilter.sys).Used the HP Recovery Manager to restore factory setting for USBStor.sys, it indicates it is successful but no changeon reboot, still cannot use flash drives, SD cards, external HDs. Units work find on my laptop.Called HP 4 times, after extensive troubleshooting each time, following their instructions, go to hp.com/go/instant, get screen saying request has been received. Each time tech tells me he cannot find my request.After a while, read 2 hours, told they need to talk to supervisor, will call me back, KISS OF DEATH, never hear from them.

View 2 Replies View Related

Excel: Make Some Cells Remain The Same When Pulling It Down?

Oct 11, 2012

Been having some problems with excel getting it to behave like Iwanted, tried google around but so clueless as to what to call things that it makes it hard. What I want is for a cell formula to do as I want when I pull on the lower-right corner down.Normally it the adds 1 to every cell address, but I need some of them to remain the same while others change. More exact:I'm trying to make excelsheet where one collum is supposed to have the formula:

=F3*Dx/D3

x goes from 3 to eternity, while F3 and D3 should remain static while doing that drag thing. I remember there was a way to mark F3 and D3 so they don't change, but can't remember how.So F4 has F3*D4/D3, F5 has F3*D5/D3 and so fourth.

View 2 Replies View Related

PC Refuses To Remain In Sleep/Hibernation Mode?

Dec 7, 2011

I recently formatted, and since, my pc refuses to remain in Sleep/Hibernation mode. When I select the option in the start menu, my pc does its thing, once it enters sleep/hibernation, it instantly powers back up. I have changed nothing to my pc's hardware since the format, and this issue never occurred before hand.

Some of the things I have tried are making sure the power management setting were correct. I also hard reset my motherboards cmos to manufacturer settings.

The above seemed to make no difference.

View 7 Replies View Related

Windows 7 And IE9 - Loading Sites Remain On Downloading Or Waiting For Long

Aug 28, 2012

I've had IE9 on this Win7 (64-Bit) computer for a few months now and today when I opened IE9 and tried to go to a few sites, it would remain on the "Downloading" or "Waiting.." in the lower left. After about 5 minutes of so, the page would load. Clicking on the "Back" or "X" wouldn't work. I had to Del/Ctrl/Alt to get out of these pages that were not loading (quickly).

I uninstalled IE9 and IE8 seems to be behaving the same way - very slow loading of sites, AOL, etc. I ran full MSE scan and nothing shows. I installed IE9 again and still same "slowness" getting into all sites! Did the "disable add-ons" thing and that didn't work, either. FF runs fine, so I presume it is something in IE9 (and IE8) that is causing this "slowness, slugishness, etc." for pages ot load/show." I tried IE9 64-bit and same problem! If I wait and wait (maybe several minutes) the page will finally show.

View 14 Replies View Related

Handle And Difference Of USB Storage And In Camera USB Storage?

Dec 15, 2011

how to handle USB removable media inside camera.With camera there is no "Safely remove hardware and eject media" option.When Photo camera is connected, a new camera device is installed and GUI window is opened with option to browse or copy photos. But there is no removable storage devise eject button on notification area. The USB removable Storage devise is also present on File Manager Computer left panel but again, there is no mouse right button eject option as normally with removable storage devices. I have checked in on several computers. How to understand. I don't believe that it's camera specific but Camera is Canon S95.

View 9 Replies View Related

Windows 7 Little Brother Damages System / Only Guests Accounts Remain Active

Jun 13, 2012

Ive been working on the administrator account for more than 2 years, left it as it was yesterday. When I came back my account was assigned with guest authorization instead of administrator's. While I was working on my administrator account I disabled Super Administrator account and therefore now I am unable to log into it. My little brother account is just another guest account. So as far as I know there are two guests accounts somehow, 0 administrator accounts, and 1 super administrator account which is disabled. How can I restore my account to its previous settings?

View 4 Replies View Related

Page Fault In Non-Paged Area BSOD, Now (Almost) Everything "Has Stopped Working"

Oct 9, 2011

Was playing New Vegas earlier today and suddenly got a BSOD. Error type was Page Fault in Non-Paged Area. My general approach is to just leave the machine off for an hour or so after a BSOD. Booted it up again a short while ago and was pleased to see Windows load and give me a login prompt. Logged in, everything seems fine so I close the "Windows has a recovered from..." message.

I try to launch a program and it immediately tells me, "X has stopped working". Hmmmm. Try again, same result. Try a different program, same result. The following things do work: Notepad, Windows Explorer, Device Manager, Disk Management, command prompt. Windows Media Player Classic works until I ask it to actually play something. Everything else gives me the "X has stopped working" almost as soon as I launch it, including DXDIAG and right-clicking on My Computer and picking Properties.

Since Disk Management worked I went ahead and ran the error checker on both my drives, they both came back clean.

I noticed that all the "X has stopped working" messages gave essentially the same details (parts that are different each time are in italics):
Problem Event Name: APPCRASH
Application Name: whatever.exe
Application Version: something.something.something
Application Timestamp: 4xxxxxxx
Fault Module Name: RPCRT4.dll
Fault Module Version: 6.1.7601.17514
Fault Module Timestamp: 4ce7ba59
Exception Code: c0000005
Exception Offset: 00039ab8
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
Additional Info 1: 0a9e
Additional Info 2: 0a9e372d3b4ad19135b953a78882e789
Additional Info 3: (same as Add Info 1)
Additional Info 4: (same as Add Info 2)

Since they were all complaining about rpcrt4.dll, I grabbed my laptop and downloaded a fresh copy of that dll from dll-files.com. I changed the name of the old one to "rpcrt4 old.dll" and dropped in the new one. Problem persisted, so I used command prompt to run regsvr32 rpcrt4.dll and got an error message saying, "The module rpcrt4.dll was loaded but the call to DllRegisterServer failed with error code 0x80070006."

Checked the BSOD sticky in the BSOD subforum here, the article there says "PAGE_FAULT_IN_NONPAGED_AREA" indicates (their words) "Faulty hardware, including RAM (system, video, or L2 cache)".

How would I go about identifying which piece of hardware has failed?

EDIT: Now I get that BSOD again every time I try to boot up

View 9 Replies View Related

"This Action Is Only Valid For Products That Are Currently Installed"?

Jul 3, 2011

A while ago this afternoon I was reinstalling all of my programs back after formatting and the power went out while the setup was in progress. Now when I try to install again I get this message:This is getting seriously frustrating, what can I do?

View 6 Replies View Related

Cannot Get Access To "Updates For Other Microsoft Products"?

Nov 10, 2010

I am trying to get Office updates on Windows 7 HP, but when I click on the "Find out more" link to activate Microsoft update nothing happens - it behaves as it were a dead link.I'm wondering if this may be because IE isn't installed as I have a European version that shipped without it and I use Firefox as my browser.Windows updates works fine. A vista box I have worked OK too - I recall it opened the update website which made me think the abscence of IE was the issue.Browsing to the update site manually just tells me that access is through the control panel now.

View 7 Replies View Related

Getting Ready For Installing - Drivermax Use?

Sep 11, 2009

I have a question & hope it's not a duplicate... I plan to install Windows 7 64 bit when I get my copy in Oct. I will do a clean install on a virgin hard drive (WD Scorpio) and have seen a number of posts advising to get drivers to hand before starting the install.

My question is ... can a tool such as Drivermax be used now (ie on my current (Win XP Pro 32 bit) set up) to download the drivers I will require when I am on my Win 7 64 bit platform? ie can I tell (eg) Drivermax to not find Win XP 32 bit drivers but to find Win 7 64 bit drivers, even though Drivermax will no doubt detect that the request is coming from a Win XP 32 bit system, if you see what I mean... - does the program default to the OS it detects, or can you override that?

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved