Ready Boost Substitute Software
Jan 16, 2012Ready boost substitute software
View 1 RepliesReady boost substitute software
View 1 RepliesCan i enable ready boost on my hard drive to speed up my system ?
View 2 Replies View RelatedOn my HP G50-112NR Notebook, 32bit, I inserted a 16G Verbatim USB flash drive to learn about ReadyBoost. I clicked on "Dedicate this device to ReadyBoost," thinking that I could change my mind later and "undo" it. I can't!! The USB had a few files on it & Properties shows they are still there. Device Manager says the USB is working properly. But when I try to "Open" the drive, the resulting window says it's empty. I have tried clicking "Do not use. . ." but nothing happens. I want to Undo the ReadyBoost "dedication" & restore the USB to normal use. How do I do that? (Unless I receive some good advice, I'm going to Format the USB).
View 6 Replies View RelatedIve turned it off before, but now not giving me the option. Under general/propertys/readyboost its not giving me do not use devise/dedicate devise/use devise. Its using all my F drive space for readyboost yet tells me because of writer protection it can't be used, so where's my 4 GB's
View 5 Replies View RelatedI've read about how Windows 7 is suppose to actually use readyboost. I have a spare 8GB Microcenter SD card. It's rated class 6.to use this on my computer? Should I go ahead and dedicate the entire 8GB?
View 10 Replies View RelatedI have an 80GB of course 74GB after formatted to NTFS.
I have too much crap on my system to use it as my primary drive. I don't feel like fighting for disk space at the end.
I was thinking of using the SSD drive for ReadyBoost and VM's. I am using Windows 7 x64 Ultimate.
I am using this little rinky-dink $9.00 PNY slider drive that my wife bought because she thought it was pretty, well little ole' me has now gone through 4 of the "fastest" flash drives on the market, the Sandisk Cruiser, the OCZ Rally 2, the Corsair Voyager and another larger PNY. None of them rate more than half the speed of this little slider flash drive. I consistently get 30W and 20R on all programs I try to test it with. Other Tests show much higher result too but let's just stick with the R/W for now.BTW, I also tried the Patriot XT Xtreme series but according to the manufacturer's it is not compatible with either Acronis products or Adobe, after hours and hours with tech support and 3 different drive we figured this out. The programs only work right if the drive is unplugged.
View 3 Replies View Relatedwhat sd card can I use for readyboost in win 7
View 2 Replies View RelatedI have Windows 7 64 bit and 8 gb ram (the most that the MB will accept. I had a spare 16gb ready boost compatiable USB drive and used it for Ready Boost. Seems a little bit quicker. My question is this: ReabyBoost is addressing 4 GB of the 16gb. I think this is all it is supposed to do. Can I used the remain 12 gb for storage or as a working area for products without compromising Ready boost?
View 4 Replies View RelatedWhich is better....Windows Live Mail or Thunderbird?
View 1 Replies View RelatedI have a question & hope it's not a duplicate... I plan to install Windows 7 64 bit when I get my copy in Oct. I will do a clean install on a virgin hard drive (WD Scorpio) and have seen a number of posts advising to get drivers to hand before starting the install.
My question is ... can a tool such as Drivermax be used now (ie on my current (Win XP Pro 32 bit) set up) to download the drivers I will require when I am on my Win 7 64 bit platform? ie can I tell (eg) Drivermax to not find Win XP 32 bit drivers but to find Win 7 64 bit drivers, even though Drivermax will no doubt detect that the request is coming from a Win XP 32 bit system, if you see what I mean... - does the program default to the OS it detects, or can you override that?
I am getting ready to install Win 7 on to a brand new Vertex 2 SSD to put in to my Samsung NC10 netbook. One thing that I have been reading about is setting BIOS to enable AHCI mode, but the downside is that my BIOS does not have a way for me to set that. I know the unit is capable of it because in older BIOS firmwares you could access hidden settings to change it.Anyway, is there another way for me to enable AHCI after installing Win 7? Also, does anyone else have any other suggestions about settings or do's/don'ts for installing Win 7 on a SSD?
View 9 Replies View Relatedi am continuously reeving this "firefox exe- file not ready". how to avoid
View 1 Replies View RelatedOk, I never got this info or 'problem' on Vista (32bits Ultimate)
Now on Windows 7 (32bits Ultimate) sometimes when I put a full DVD/CD full (I mean not empty) on the drive the explorer show me this message:
And it's always this file: desktop.ini So, how can I stop that annoying message?
how to make access to a pendrive which is not ready and not visible to the computer
View 1 Replies View RelatedPlay Ready Mediacenter error 0x80070002
View 1 Replies View RelatedI have a multi-account pc that the whole family uses with the following accounts:-
1. Admin
2. Kids
3. Media
I spent ages yesterday setting up GPO (kidslocked.msc) for my kids account and had to go through EACH individual setting. Eventually i got it spot on, but the only problem was that in the event of a problem, i wanted to be able to reset the settings, so that i can setup anything i need. I ended up downloading/running a file from this site:-
Where do i get a reset config file from for GPO?
That file has now reset my GPO settings, but it's also cleared the settings i saved for kidslocked.msc too.
Here is what i want to know:-
1. Can i get readymade GPO templates?2. If the answer to question 1 is NO, then how can i multi-select the settings??...i want to enable ALL settings in the Administrative Templates and then simply disable those that i don't want.
I've been through a very singular problem for the last few days.My Windows 7 suddenly become slow to make USB Mass storage devices ready to access, but this happens only the first time I connect them on my computer.If I start the computer and connect the USB Mass storage device (that was recognized a long time ago) it takes almost 1 minute to be ready for use... After that, every USB Mass storage device that I connect to the computer opens almost instantly.If I restart the computer, the same thing happens. I've tried to reinstall drivers, to disable security, looke for a service that controls it, verified the power options and verified every hardware.
View 5 Replies View RelatedWas just wondering if any body tried windows 7 boost .. USB and which USB would be best for this.?
View 1 Replies View RelatedI can't find any where to boost my 20 db in windows 7.The custom setting just isn't their in the audio settings under recording.I'm using a plantronics 648 USB headset so it's not hidden in the audio cards control panel either - I also checked the control panel in the products software and zip their too.
View 1 Replies View RelatedThe flyer that came with this month's PCA included a tip to utilise a blank USB flash drive for virtual memory. When I go to Properties/ReadyBoost on the USB drive, it says "This device cannot be used by ReadyBoost"Then it says "ReadyBoost is not enabled because the service responsible for ReadyBoost (Sysmain) has been turned off on this computer. An administrator can turn the Sysmain service back on"When I searched, including Microsoft website, there is no recognition of the term Sysmain.
View 9 Replies View RelatedAre mice and keyboards plug-and-play for laptops (automatically detected and ready to use)? Or will it require driver installation of any sort? I have a Dell laptop and will be buying a Dell keyboard and mice...
View 4 Replies View RelatedFirst of all:I'm having a Creative Soundmaster Audigy 4 SE 7.1 soundcard and the (according to the Windows update manager) latest driver availabe.I recently installed Windows 7 because I always wanted to know how it was.Everything went fine, the Update Manager automatically installed all the drivers I needed, but now there's a problem with my audio settings.Since I've been switching over to Windows 7 people have told me that I'm very very quiet in Teamspeak or Skype, so I tried to activate the microphone boost in the audio settings.But when I open the settings of my microphone and click the "custom" tab, all I see is "Do not monitor".There's no microphone boost. I heard from some people they had the same problem under Windows Vista and solved it by switching to newer drivers, but alas, it seems I have the newest beta driver for Windows 7.
Is there any other way towards activating the boost or do I just have to wait until Creative releases a Windows 7 beta driver with microphone boost included?I also checked if the problem comes from my headset, but it's working fine under Windows XP with microphone boost enabled. The voice recognition experience
I've just bought a new laptop(acer aspire 7750 g windows 7 64bit) and i have a question related to it. I learned that my laptop have a turbo boost technology but I did not install any driver about it .When i want to install from(Acer Support: Downloads & Support Documents - Notebook / Aspire / Aspire 7750G) the process dont complete well. Should i install the driver for activating the turbo boost ?
View 2 Replies View RelatedI recently upgraded my wireless router from a D-link Di-614 to a Linksys e3000. A buddy of mine recommended it saying he didnt have wifi issues from the top of his house all the way to the basement. I live in a bungalo home, and so the router is on one side of the house, and my Desk and macbook pro is on the otherside. Im getting 4 bars in windows 7, its showing good connectivity, but its constantly disconnecting, even when its stable, its running very slow. When im close to the router is works perfect. I design for a living and am constantly transferring files to clients. So this has become a problem, Im constantly having to unplug my laptop and walk over to the router to send/recieve large files. Any suggestion on what i can do? Could there be something wrong with the router or my laptop ?
View 9 Replies View RelatedI used Bost my Pc to increase my Pc's ram. Later formatted the flash drive but now it doesn't work anymore but just some errors. The drive besides that works perfectly.
View 1 Replies View Relatedwould like to boost my audio on my laptop i have a Msi M662
View 6 Replies View RelatedI've done a mild overclock on my i5 2500k processor. I simply changed the multiplier to x44.Should I disable turbo boost in my bios? And, or, maybe think of anything else?
View 9 Replies View Relatedhow can i get a software to boost my audio output ?
View 4 Replies View Relatedmy laptop has "intel turbo boost technology monitor 2.0" does anyone no what the little green blob is within the box
View 2 Replies View RelatedWhen I try to install it at the end I get this message:
Uploaded with ImageShack.us
I tried going into cmd and typing ''regsvr32 VbScript'' and it worked as it should, but even after I removed the driver and tried installing it again it still did not work.