The flyer that came with this month's PCA included a tip to utilise a blank USB flash drive for virtual memory. When I go to Properties/ReadyBoost on the USB drive, it says "This device cannot be used by ReadyBoost"Then it says "ReadyBoost is not enabled because the service responsible for ReadyBoost (Sysmain) has been turned off on this computer. An administrator can turn the Sysmain service back on"When I searched, including Microsoft website, there is no recognition of the term Sysmain.
I'm running Windows 7 x64 with a Quad Core and 4GB of RAM. I've enabled Readyboost on two USB devices of 2GB each I had laying around: a SanDisk Cruzer Micro, random read speed is 5341 KB/sec, random write speed is 3068 KB/sec. And a Kingston FCR-HS219, random read speed is 3412 KB/sec, random write speed is 3739 KB/sec. Not much, but should suffice to give it a try.
While booting, I saw and improvement. But the thing is I have my computer on 24/7 so I don't care that much about boot time. And I don't see a lot of activity of these devices once is turned on. Specially over the pendrive.
Is it because I have > 2GB RAM? Or is it because they are too small?
Would I benefit if I create a pagefile over one of these devices instead of Readyboost?
How can I "measure" this?
Is there a guide regarding Readyboost and USB devices?
I have a new Notebook, an LG X140, with Windows 7 Home Premium ... activated as Genuine.It only came with 512 MB of RAM so I decided to use ReadyBoost and a 4 GB USB Drive to add more RAM.I selected "Dedicate this device to ReadyBoost" which selected 3851 MB. It only actually created an extra 2 GB of RAM. I believe I understand why there was only 3851 MB available and why it only could create 2 GB of RAM from that. so that isn't so much of an issue for me.I then used a 1 GB SD Chip which is ReadyBoost Compatible and added that to ReadyBoost the same way, hoping that I could push it to 4 GB of RAM ... however my computer still only shows 2 GB of RAM. I have tried swapping different USB Drives and SD Cards but with no success, I can't seem to get my computer to recognize any more than 2 GB of RAM.
I know memory can help save some battery life since it decreases the load on your CPU, and I know Readyboost acts like memory, but I also know USB drives can drain your battery. So my question is, would Readyboost help with battery life or drain it since its a USB?
Aka when I'm running off battery and I want the battery to last as long as possible, should I plug in my USB to use Readyboost or just keep it out?
I have been running build 7260 for awhile on my Asus notebook (see system spec) and so far have not had too many issues with it. Since I have done several succesive upgrades: Vista Business > Windows 7 build 7227 > Windows 7 build 7260 I have noticed some bugs creeping in (apps and games are crashing periodically or not loading correctly, gaming performance could be better). I attribute this to the string of successive upgrades.
I am going to wipe the drive and do a clean install of either the 32 or 64 bit RTM build in the next few days as it becomes available. One of the main goals is to increase performance with both applications and games. I use this laptop for work doing web development and heavy photoshop and graphics intensive work. I typically have many applications open at once using quite allot of system resources.
For this project I am going to:
A: Add another 2gb of ram to bring the total from 3gb to 4gb, or
B: Add a fast 16gb sd card to the system for the ReadyBoost feature, probably using around 6 to 9gb for this feature
For me to add the extra gig of ram it becomes more necessary to install the 64 bit build. If I use the 16gb sd card for ReadBoost, I can probably stick with 32 bit. None of my apps are currently 64 bit anyhow so I am not sure 64bit is the way to go right now.
I would like to hear people's thoughts on this and what others experiences have been especially using ReadyBoost on systems with over 2gb of memory..
I just came upon the concept of using readyboost with my computer since I usually run quite a few programs in the background while I'm gaming. I know it wont help much but just a little increase in performance is better than nothing.
I was just curious how much memory can be used on 1 flash drive?
I just bought a 16 GB Sandisk from Best Buy and when I used Readyboost with it the cap was 4 GB. I wasn't sure if the drive I bought wasn't designed to go higher or my USB port couldnt handle it. Then I wondered if the file format the drive was in was capping it so I can confused and thinking of buying a better one possibly designed for the readyboost.
trying to get superfetch-readyboost to work with no luck. Decided to use my back up disk i created, how do i get the comp. to run the disk ? Dell, 4010, Windows 7 home premium..
Readyboost is NOT virtual RAM from a flash drive.Readyboost is NOT RAM at all.Readyboost is a cache used by your hard drive.Basically it copies stuff you normally use to the speedy Readyboost cache, where it can be used faster.Readyboost give an all round performance boost, and is more noticeable with older, slower hard drives. The more you have, and the faster it is means more boost.Readyboost yields the most with small file browsing, boot up time, windows operations, and some programs you use.I have 20GB of readyboost, I got that instead of upgrading my HDD to a SSD or hybrid.
Why does Windows 7 say my 32gb sandisk SDHC 4 is not suitable or does not have the caracteristics for readyboost. Is there anything I can do to change the cards caracteristics so that it will work with readyboost?
Has anyone tried ReadyBoost on a virtual Windows 7 machine on a Mac running VMWare Fusion?
I am running Windows 7 on a Macbook Pro with 8GB of RAM and the Virtual Windows machine really slows everything down globally. I have tried configuring the Windows VR with 2GB, 1.5GB and 1GB of RAM. Configuring the virtual machine with more than 2GB of RAM really slows down the Mac. Hoping that ReadyBoost might improve things.
I have a new 8 GB memory stick and it passed the readyboost test - initially. But I wanted to dedicate the device to readyboost so I reformatted to NTFS (was FAT32 initially) and now all I can get is "This device cannot be used with Readyboost". I have tried a command line test that gives me a read speed of 4.8 MB/S which according to the specs I have seen is fast enough for Readyboost.
I like a clean notification area, and one thing that's always bothered me is the "Safely Remove Hardware and Eject Media" icon for my ReadyBoost flash drive. I don't understand why it doesn't ignore all ReadyBoost devices in the first place. Any fix for this that doesn't involve disabling the function altogether?
I can't find any where to boost my 20 db in windows 7.The custom setting just isn't their in the audio settings under recording.I'm using a plantronics 648 USB headset so it's not hidden in the audio cards control panel either - I also checked the control panel in the products software and zip their too.
First of all:I'm having a Creative Soundmaster Audigy 4 SE 7.1 soundcard and the (according to the Windows update manager) latest driver availabe.I recently installed Windows 7 because I always wanted to know how it was.Everything went fine, the Update Manager automatically installed all the drivers I needed, but now there's a problem with my audio settings.Since I've been switching over to Windows 7 people have told me that I'm very very quiet in Teamspeak or Skype, so I tried to activate the microphone boost in the audio settings.But when I open the settings of my microphone and click the "custom" tab, all I see is "Do not monitor".There's no microphone boost. I heard from some people they had the same problem under Windows Vista and solved it by switching to newer drivers, but alas, it seems I have the newest beta driver for Windows 7.
Is there any other way towards activating the boost or do I just have to wait until Creative releases a Windows 7 beta driver with microphone boost included?I also checked if the problem comes from my headset, but it's working fine under Windows XP with microphone boost enabled. The voice recognition experience
On my HP G50-112NR Notebook, 32bit, I inserted a 16G Verbatim USB flash drive to learn about ReadyBoost. I clicked on "Dedicate this device to ReadyBoost," thinking that I could change my mind later and "undo" it. I can't!! The USB had a few files on it & Properties shows they are still there. Device Manager says the USB is working properly. But when I try to "Open" the drive, the resulting window says it's empty. I have tried clicking "Do not use. . ." but nothing happens. I want to Undo the ReadyBoost "dedication" & restore the USB to normal use. How do I do that? (Unless I receive some good advice, I'm going to Format the USB).
I've just bought a new laptop(acer aspire 7750 g windows 7 64bit) and i have a question related to it. I learned that my laptop have a turbo boost technology but I did not install any driver about it .When i want to install from(Acer Support: Downloads & Support Documents - Notebook / Aspire / Aspire 7750G) the process dont complete well. Should i install the driver for activating the turbo boost ?
I recently upgraded my wireless router from a D-link Di-614 to a Linksys e3000. A buddy of mine recommended it saying he didnt have wifi issues from the top of his house all the way to the basement. I live in a bungalo home, and so the router is on one side of the house, and my Desk and macbook pro is on the otherside. Im getting 4 bars in windows 7, its showing good connectivity, but its constantly disconnecting, even when its stable, its running very slow. When im close to the router is works perfect. I design for a living and am constantly transferring files to clients. So this has become a problem, Im constantly having to unplug my laptop and walk over to the router to send/recieve large files. Any suggestion on what i can do? Could there be something wrong with the router or my laptop ?
I used Bost my Pc to increase my Pc's ram. Later formatted the flash drive but now it doesn't work anymore but just some errors. The drive besides that works perfectly.
Ive turned it off before, but now not giving me the option. Under general/propertys/readyboost its not giving me do not use devise/dedicate devise/use devise. Its using all my F drive space for readyboost yet tells me because of writer protection it can't be used, so where's my 4 GB's
I've read about how Windows 7 is suppose to actually use readyboost. I have a spare 8GB Microcenter SD card. It's rated class 6.to use this on my computer? Should I go ahead and dedicate the entire 8GB?
I've done a mild overclock on my i5 2500k processor. I simply changed the multiplier to x44.Should I disable turbo boost in my bios? And, or, maybe think of anything else?