I've just bought a new laptop(acer aspire 7750 g windows 7 64bit) and i have a question related to it. I learned that my laptop have a turbo boost technology but I did not install any driver about it .When i want to install from(Acer Support: Downloads & Support Documents - Notebook / Aspire / Aspire 7750G) the process dont complete well. Should i install the driver for activating the turbo boost ?
I read a little about it at Intel's website that its for Core i7 (which I have), but when I try to install it I get an error box that my hardware is not supported.
Just curious if anyone knows anything about this driver and/or why I may not be able to install it.
Did a clean install on my Vaio laptop (VPCF11LFX) of Win 7 64 bit Ultimate. Before I had a program under Control Panel/Program and Features called Intel Turbo Boost Technology Driver. Now I don't. I can't find out what this program is or what it's purpose is. Is it even necessary as my laptop seems to be running fine. I found the latest version (I think) and it seemed to load but when I checked, it didn't show up under Programs and Features.
Finally got a new laptop yesterday, yay! so im still figuring things out since im new to laptops and windows 7, just wondered if someone can explain what is intel turbo boost technology monitor software? please everytime i switch on there's a wee window opened and it's something to do with this.
May I know can I disable Intel® Turbo Boost Technology Monitor & Intel® Management Engine Components or not? If I disable both of them will cause any bad effect?
I've done a mild overclock on my i5 2500k processor. I simply changed the multiplier to x44.Should I disable turbo boost in my bios? And, or, maybe think of anything else?
When I try to install it at the end I get this message: Uploaded with ImageShack.us I tried going into cmd and typing ''regsvr32 VbScript'' and it worked as it should, but even after I removed the driver and tried installing it again it still did not work.
I have an Acer Aspire 7745g laptop, 8gb ram, ati 5650m graphics card, and an i5 460M dual core with hyperthreading, clock speed 2.53 ghz and Windows 7 64 bit When playing games like BF3, I notice that the processor is close to 100%, usually between 90% and sometimes going to 100%. I was wondering why Intel Turbo boost never kicks in, it says with turbo boost my cpu can go up to 2.8 ghz, but it always stays at 2.53 whenever I check on the turbo boost monitor
So who actualy did try check temperature while cpu is at max work with turbo boost?On mine it can go till 75C at least and i consider it prety hot,before you ask - no its a new laptop with 2 month lol Aspire 7750G/ Intel i5 2430M 2.4ghz (Turbo Boost till 3.0ghz) also use a base akasa helix cooler.I decided to disable Turbo Boost wich wont pass trough 55C under max workload,whats your opinion on this? im prety sure that anything higher than 70C is crushing CPU eventualy.
I will be running a large number of engineering heavy mathamatical calculation single thread programs. Would you expect a i5-2500 use turbo to increase clock speed to 3.7?
I notice that 7 will have touch screen capability, I'd appreciate any information on setting up, or general data on such. What I've seen so far is all a little vague.
For the last couple days my peerblock program has been blocking communication from my system to National Institute of Standards and Technology. It appears that something I have on my system is scanning all my UDP ports and trying to communicate with NIST.
I had it installed previously on my computer, but it was in Program Files x86, so I uninstalled it and tried to reinstall, but am greeted by a blank install box that I cannot read. The only visible option is the OK button which cancels the install. [code] I am running Win 7 64 bit on a P6TD Deluxe board with my main drive a CORSAIR CMFSSD-128GBG2D.
New IRST v11.7.0.1013: 11.7.0.1013 Production Version Release Notes Official Intel v11.7.0.1013 Driver, I do not know if you're like me that has the IRST v11.2.0.1006 version driver on their machine for a while (iaStor.sys), but couldn't successfully install the v11.6.0.1030 I think the bug for me looks like a little that: Quote: 4160542 Placing OS on 2-drive RAID0 volume at end of matrix array causes RST to construe incorrect HDD as the system Windows 7-64 Any feedback will be appreciated as i still can't install properly those new versions since v11.2.0.1006.
I can't find my ssd in intel rapid storage technology, ahci and raid. Because I want to use it for caching. It's detected in the bios and windows explorer. My ssd is corsair sata3 60gb running the latest firmware 1.3.3
I put two HDDs on GA P55A-UD4P motherboard in Raid1 type array (on Intel SATA Controller) and they were working fine for quite some time (2 weeks or so). One day, after Windows started up, I noticed a blue icon on Intel RST manager and it says that the array is initializing. Will it delete the data that is stored in there already ? As far as I know, initialization is needed in Raid5 type arrays, where parity needs to be calculated. Raid1 is a pure mirror so what would be the need for initialization right now with data in the array already?
I received this message today on my screen. I went to Intel but could not understand what they were telling me to do something about BIOS nnd Sata and now I'm lost. My computer has just slowed down to a crawl these last 4 or 5 days, could this be the problem. I'm a novice and quite lost. My browsers and mail programs are working at a crawl.
Device driver for this item was not successfully installed. After finding the driver from the source, I ran the installer in compatibility mode because it worked previously in Vista. Once I ran it in compatibility mode and rebooted a lot of the missing drivers were found however Bluetooth Peripheral Device was still not found!I previously had a Bluetooth device connected using windows 7, however I uninstalled the driver and attempted to reinstall because I was unable to add additional devices. I am still unsuccessful and would like to use my Bluetooth device.
Windows 7 version 6.1 build 7100
P.S. - The device shows up in my device manager and working properly, however I cannot add any devices because windows 7 simply doesn't find any....
My Windows 7 is running slow however it is different from simply lagging. The mouse works fine however clicking on applications does not bring them up. The only difference I can see is an error message coming up saying "Intel Rapid Storage Technology not working". Any ideas on what I should do or extra information you require?
I can't find any where to boost my 20 db in windows 7.The custom setting just isn't their in the audio settings under recording.I'm using a plantronics 648 USB headset so it's not hidden in the audio cards control panel either - I also checked the control panel in the products software and zip their too.
The flyer that came with this month's PCA included a tip to utilise a blank USB flash drive for virtual memory. When I go to Properties/ReadyBoost on the USB drive, it says "This device cannot be used by ReadyBoost"Then it says "ReadyBoost is not enabled because the service responsible for ReadyBoost (Sysmain) has been turned off on this computer. An administrator can turn the Sysmain service back on"When I searched, including Microsoft website, there is no recognition of the term Sysmain.
Ok, I reinstalled Windows 7, it detected two hard drives, one 32gb and other 466gb, I installed the Windows 7 on the 466GB and installed all the drivers. On the Intel Rapid Storage Technology, Storage View, the SSD has 30GB Cache Volume but does not have any Data Volume like it is supposed to: Picture Below: View image: SDC11483 How do I create Data Volume?Notice it has Data Volume AND Cache Volume split in the SSD?
First of all:I'm having a Creative Soundmaster Audigy 4 SE 7.1 soundcard and the (according to the Windows update manager) latest driver availabe.I recently installed Windows 7 because I always wanted to know how it was.Everything went fine, the Update Manager automatically installed all the drivers I needed, but now there's a problem with my audio settings.Since I've been switching over to Windows 7 people have told me that I'm very very quiet in Teamspeak or Skype, so I tried to activate the microphone boost in the audio settings.But when I open the settings of my microphone and click the "custom" tab, all I see is "Do not monitor".There's no microphone boost. I heard from some people they had the same problem under Windows Vista and solved it by switching to newer drivers, but alas, it seems I have the newest beta driver for Windows 7.
Is there any other way towards activating the boost or do I just have to wait until Creative releases a Windows 7 beta driver with microphone boost included?I also checked if the problem comes from my headset, but it's working fine under Windows XP with microphone boost enabled. The voice recognition experience