May I know can I disable Intel® Turbo Boost Technology Monitor & Intel® Management Engine Components or not? If I disable both of them will cause any bad effect?
Finally got a new laptop yesterday, yay! so im still figuring things out since im new to laptops and windows 7, just wondered if someone can explain what is intel turbo boost technology monitor software? please everytime i switch on there's a wee window opened and it's something to do with this.
I read a little about it at Intel's website that its for Core i7 (which I have), but when I try to install it I get an error box that my hardware is not supported.
Just curious if anyone knows anything about this driver and/or why I may not be able to install it.
Did a clean install on my Vaio laptop (VPCF11LFX) of Win 7 64 bit Ultimate. Before I had a program under Control Panel/Program and Features called Intel Turbo Boost Technology Driver. Now I don't. I can't find out what this program is or what it's purpose is. Is it even necessary as my laptop seems to be running fine. I found the latest version (I think) and it seemed to load but when I checked, it didn't show up under Programs and Features.
I bought a new laptop now and I am not so well with the technology it says: Intel Corporation driver update for Intel(R) Management Engine Interface so what do I need to do now?
When I try to install it at the end I get this message: Uploaded with ImageShack.us I tried going into cmd and typing ''regsvr32 VbScript'' and it worked as it should, but even after I removed the driver and tried installing it again it still did not work.
I have an Acer Aspire 7745g laptop, 8gb ram, ati 5650m graphics card, and an i5 460M dual core with hyperthreading, clock speed 2.53 ghz and Windows 7 64 bit When playing games like BF3, I notice that the processor is close to 100%, usually between 90% and sometimes going to 100%. I was wondering why Intel Turbo boost never kicks in, it says with turbo boost my cpu can go up to 2.8 ghz, but it always stays at 2.53 whenever I check on the turbo boost monitor
So who actualy did try check temperature while cpu is at max work with turbo boost?On mine it can go till 75C at least and i consider it prety hot,before you ask - no its a new laptop with 2 month lol Aspire 7750G/ Intel i5 2430M 2.4ghz (Turbo Boost till 3.0ghz) also use a base akasa helix cooler.I decided to disable Turbo Boost wich wont pass trough 55C under max workload,whats your opinion on this? im prety sure that anything higher than 70C is crushing CPU eventualy.
I've just bought a new laptop(acer aspire 7750 g windows 7 64bit) and i have a question related to it. I learned that my laptop have a turbo boost technology but I did not install any driver about it .When i want to install from(Acer Support: Downloads & Support Documents - Notebook / Aspire / Aspire 7750G) the process dont complete well. Should i install the driver for activating the turbo boost ?
I've done a mild overclock on my i5 2500k processor. I simply changed the multiplier to x44.Should I disable turbo boost in my bios? And, or, maybe think of anything else?
I had it installed previously on my computer, but it was in Program Files x86, so I uninstalled it and tried to reinstall, but am greeted by a blank install box that I cannot read. The only visible option is the OK button which cancels the install. [code] I am running Win 7 64 bit on a P6TD Deluxe board with my main drive a CORSAIR CMFSSD-128GBG2D.
I can't find my ssd in intel rapid storage technology, ahci and raid. Because I want to use it for caching. It's detected in the bios and windows explorer. My ssd is corsair sata3 60gb running the latest firmware 1.3.3
I put two HDDs on GA P55A-UD4P motherboard in Raid1 type array (on Intel SATA Controller) and they were working fine for quite some time (2 weeks or so). One day, after Windows started up, I noticed a blue icon on Intel RST manager and it says that the array is initializing. Will it delete the data that is stored in there already ? As far as I know, initialization is needed in Raid5 type arrays, where parity needs to be calculated. Raid1 is a pure mirror so what would be the need for initialization right now with data in the array already?
I received this message today on my screen. I went to Intel but could not understand what they were telling me to do something about BIOS nnd Sata and now I'm lost. My computer has just slowed down to a crawl these last 4 or 5 days, could this be the problem. I'm a novice and quite lost. My browsers and mail programs are working at a crawl.
My Windows 7 is running slow however it is different from simply lagging. The mouse works fine however clicking on applications does not bring them up. The only difference I can see is an error message coming up saying "Intel Rapid Storage Technology not working". Any ideas on what I should do or extra information you require?
I have a possibility to buy cheap an intel turbo memory 1GB. The seller says that it works only on Vista, and that 512MB are for Vista ReadDrive, and 512MB are for Vista ReadyBoost. Can me someone explain in easiest words what is ReadyBoost and ReadyDrive? And will it work on Windows 7? And makes it any sense? What benefits can i have from using it.
Ok, I reinstalled Windows 7, it detected two hard drives, one 32gb and other 466gb, I installed the Windows 7 on the 466GB and installed all the drivers. On the Intel Rapid Storage Technology, Storage View, the SSD has 30GB Cache Volume but does not have any Data Volume like it is supposed to: Picture Below: View image: SDC11483 How do I create Data Volume?Notice it has Data Volume AND Cache Volume split in the SSD?
I upgraded to windows 7 over vista the other day and I just noticed a problem. I have the Intel Turbo Memory Readyboost and it used to work perfectly with Vista, but I just opened the window where you enable/disable it, and it said it was disabled, so i enabled it and it asked me to restart my computer so I did, and when I restarted I went back just to make sure it was enabled and it is still disabled. I tried it again and same thing happened... anyone know why or how to fix it?
See, I have a AM3+ motherboard, and currently a FX 6200 clocked at 4.2GHz, thing is, I feel when I try to play say BF3 on a 32 man server, My pc run's smooth, yet come to a 64 man server, My PC feels sluggish and well fails. Now I know Its going to effect my FPS and CPU usage with what settings in game am I running, well Ultra I don't use I mainly use a mix of medium and high, to Me its all about performance before eye candy, but BF3 seems to have no performance boost the lower I turn the settings down, I mean with one card I get 98-99% usage but in SLI I get 50% on each card with v sync disabled and on ultra I have even tried with settings on low and enabling v sync, lol that is just worse! I have been told the higher the settings, the higher the usage, and my cpu seems to be lagging behind.I know there is things to take into consideration like the Ram, Graphics, Hard drives, Lag ect, But I'm running two GTX 480's, 2 Velociraptor Hdd, 16GB Corsair Dominator Ram, a Corsair HX 1050w psu and Windows 8.Come January I'm planning a upgrade, but what My dilemma is should I move to Intel has I feel my issue is a major bottleneck with the 480's and my CPU, I don't want to buy a 200 cpu (8350) and a few months down the line have to invest in a Intel because the Pile driver has failed like the Bulldozer did! Or just upgrade to a Intel i5 or i7, I mainly game but do video work as well, even considering getting a i7 2600k or 2700k,
I will be running a large number of engineering heavy mathamatical calculation single thread programs. Would you expect a i5-2500 use turbo to increase clock speed to 3.7?
I just got this my new pc, and i also got a monitor with it. The computer had a integrated intel video card, and an Nvidia 8500GT. Is it possible to plug the secondary monitor into the integrated intel card, and use the Nvidia for my main display?
To start, a quote from Windows 7 EULA: Quote: ... 2. INSTALLATION AND USE RIGHTS. a. One Copy per Computer. You may install one copy of the software on one computer. That computer is the "licensed computer." ... As the older geeks certainly remember, in earlier Windows versions it was possible to use different hardware profiles. You simply got a boot menu asking which hardware profile to boot.In 7 this is not possible. You have to manually disable or enable the hardware components when the need arises.
What if I install all the software I need, activate Seven, then create a system image. Shut down the computer, disconnect the Windows 7 HD, attach an equal new HD, use recovery tools to return the said image to this HD number 2. Put HD 1 back, use BCEDIT or a third party tool to create a boot menu which at this point would include two absolutely identical Seven installations.Then strip down Seven setup #2, disable all unnecessary devices etc. thus creating a Seven - Seven dual boot environment, with two different HW-profiles. The computer is the same, only one of the two Sevens could be used at any given time, and so on
I just installed Microsoft virtual pc and xp mode. In the event viewer it says to update to the latest version of Virtual pc integration components. When I check tools in XP mode all that's there is disable integration components. There's nothing there to update to the latest. Where do you go to see what version you have?
I just happened to disable desktop composition on the Ghost Recon FS exe. file, since it was suppose to help with crashes and bugs.I wonder how significant is this "performance bump", is it useful for gaming?Can it truly increase FPS? or perhaps ensure better stability and less FPS dips?
I'm an amateur photographer, I have made an ICC color profile for my screen under windows xp (using a friend's probe and software) the profile works perfectly under xp
I have loaded it under seven following all the steps found here
Color management settings: frequently asked questions - Windows Vista Help
at the "How do I change the default color settings for a specific device for all users on the computer?" section
The monitor is properly installed, the profile is set as default for my monitor, but I can see no change in color rendering... as if the icc profile is not active
When I set the power management to turn off the monitor after x minutes, the monitor is off for 1 second and it turned on automatically. I am using msi ex600 laptop.
I have tried the following: * Unplugged the mouse * Exit from all application's running * Disable the network card
My bios and graphic card are updated. The hibernate option is working fine. Is there a way to find what turns on the monitor?
just installed Windows 7 today! It looks great and functions really well, but I have a big problem that if I don't solve it I have to install Vista again. The problem is that all the USB inputs on the computer aren't working ... I can't use my mouse I can't use anything that connects with USB. In the Device Manager it tell me I have Code 19, which is a problem with the registry files. Can anyone please help me solve this problem? if not I have no choice and need to go back to Vista .