I'm an amateur photographer, I have made an ICC color profile for my screen under windows xp (using a friend's probe and software) the profile works perfectly under xp
I have loaded it under seven following all the steps found here
Color management settings: frequently asked questions - Windows Vista Help
at the "How do I change the default color settings for a specific device for all users on the computer?" section
The monitor is properly installed, the profile is set as default for my monitor, but I can see no change in color rendering... as if the icc profile is not active
I want to color calibrate my new Dell XPS 15z laptop, but before I do I'd like to back up the existing color profile in case I prefer it to the calibrated one ...
The only problem is, when I open Color Management, NO default color profile is listed, so I don't know what to go back to. I know there HAS to be a default color profile somewhere ... How do I find it?
While playing Battlefield 3, often I get the color management popping up, asking me about is your computer running slow etc., keep this settings or change. Even when I choose the option to leave it and don't bother me anymore its comes back a few times. Is there a way to disable this?
My monitor seems to be faulty or just crap because when I first switch it on the gamma is way high and then it goes back its normal level after about 20 minutes, it is also too high anyway so I use "color management" to set a profile with less gamma...previously I have set 2 profiles one with less gamma and one with even less for when I first switch the monitor on.
But everytime I finished playing games such as Crysis 2 or Just Cause 2 or Adobe the screen will be in over brightness so that I have to go to Control Panel > Color Management and click Set as Default Profile to get it back to normal.
My question is what command I can set a color profile in a command prompt, so that I can put it into the end of a batch file?
When I set the power management to turn off the monitor after x minutes, the monitor is off for 1 second and it turned on automatically. I am using msi ex600 laptop.
I have tried the following: * Unplugged the mouse * Exit from all application's running * Disable the network card
My bios and graphic card are updated. The hibernate option is working fine. Is there a way to find what turns on the monitor?
Looked around but nothing specific. If there's another thread with the answer feel free to post the link and smack me...
Have a Dell GX620 (desktop: mid-size that requires low profile PCIe graphics card) running Windows 7 Pro 32 bit. Looking for a low profile card that will support dual DVI (expecting a Y cable) with dual monitors and extended desktop with 2 different displays. Dell 22" widescreen and Dell 19" digital.
Can go VGA if needed but would like to go all DVI.
Another thing I'd like is certified Windows 7 drivers vs just compatible or something that I have hack to make it work. I tend to build out a box and let it run a few years with as little tweaking as possible...
May I know can I disable Intel® Turbo Boost Technology Monitor & Intel® Management Engine Components or not? If I disable both of them will cause any bad effect?
so I was on my desktop main account and then let my dad log on to a guest account I recently created for him since his laptop isn't working, then when I came back I logged onto my profile I couldn't open any browser, in the case of firefox this came up (firefox can't load host something, missing profile) and chrome (your preferences cannot be read)
then I couln't open some shorcuts (windows cannot find the target. and my utorrent setting reset as well, like if I had never used it, BUT the guest account works perfectly.
I'm able to open firefox with open as administrator but all addons, bookmarks are gone, I can't open the document, picture, and music links on the start menu either
Originally I had all my data files in drive D and only programs in drive C. Somehow my old user profile got corrupted and the Backgound wall paper is not working properly. So I created a new admin profile to fix it but now I have a mess.After I created a new admin profile and moved the old users folder/files to the new user , I decided to delete the old profile after everything seems to be working properly . When deleting the old profile I elected to save old user files to my desktop ( fortunately) . I now have a very fragmented system . Some of the folder/files are still under my old username in D drive, nothing in my new user name in D drive plus almost all of the folder/files from the old user ( in drive D) are now in a folder on the desktop where windows elected to place them when I elected to save the folders/files. I really need all the old user folders.I would like to have the Data in either under my old or new username in Drive D instead of fragmented all over the place. I realize I ended up in this situation because I didnt understand fully what windows will do when creating and deleting user profiles.
i have problems with adobe cs6 installing, and it's been suggested i install it under a new profile. no problem with that, however, will i be able to access / run it under my 'normal' profile? finally, will doing this affect any of my existing programs in my 'normal' profile?
I am trying to set my monitor's screen give accurate renditions of my pictures. I use Quick Gamma to set gamma. When doing this I can use either Nvidia's controls or windows controls (right click desktop>Nvidia Control Panel. When using Nvidia's Control Panel, there are two choices: Use other applications control color settings or Use Nvidia settings. Am I correct in assuming that the former setting is Windows? I always check the button to use Nvidia settings (and then Apply>OK), but when I go back to this screen at a later time, the Other applications control color settings is always selected. I'd like to default to Nvidia.
when i try to create a new user profile ~ with or without a password, it shows up on the main login page, but when i click on it to open, the message "UserProfileService_service failed the logon_user profile cannot be loaded". i have searched microsoft support with little solutions listed. and the ones that are listed seem too technical for me to be trying on my own. there are many posts there with this problem, but they all seem to be several years old.
i am using windows 7. i have never been able to create any accounts other than my administrator account & the one account i use for all my general computer use. i have been using norton 360 with no problems. i have resorted to just using any "log in/log out' links on all the sites my husband wants to use.i am really not all that confident doing anything super technical to fix this, since i don't have a real understanding of different extensions or types of files. i am afraid i could really mess everything up really bad. but, it would just be SO MUCH EASIER & FASTER if i had my account & my husband had his own account.
My wife's Dell desktop (after a nighttime thunderstorm) will not permit her to log on. When she enters the password she gets the following message: "The User Profile Service service failed the logon. User profile cannot be loaded". Has anyone encountered this issue and is there a user fix, or should we take the computer back to where it was bought for service?
I have a three monitor set up. Whenever I open up a browser, either internet explorer or google chrome on monitors 2 and 3, after a few seconds it automatically drags my browser into my main monitor(monitor 1, where my start button and status bar is located)
I have a setup with 6 monitors. Today my main monitor broke and I couldn't find a way to shut the PC down since I couldn't access the main desktop to get to the Start menu.Is there a way to change which monitor is the main monitor without having access to the current main monitor?
I am running a dual monitor setup with my TV hooked up via HDMI to my laptop.
Everything was working fine before, I always had the laptop as my main display yet I could play a video or a game fullscreen on the TV.
Since a couple of days, as soon as I put something in fullscreen, it immediately goes on my laptop, regardless if it's open on my TV or my laptop. I don't remember changing/installing anything that could've changed that...
I checked a bit in the AMD vision software and the Windows control pannel but I can't seem to solve my problem without switching my TV as the main display. I also made a quick search on google as well as here but the problems were mainly with Flash, which isn't in cause here.
Here are my system specs:
Toshiba Satellite L75D Windows 7 home premium 64-bit AMD Radeon 6520G
I have just did a clean install of Windows 7 ultimate from XP and I am unable to get my dual monitors to work like they did in XP.
I have a DVI Radeon graphics card plugged into the agp slot, and a Nvidia geforce vga adapter plugged into a pci slot of my dell optiplex 755. When I am in the screen resolution settings the second monitor cannot be detected.
In bios I have 2 options under primary video adapter and they are auto, and onboard card. When set to auto the Nvidia card gets a signal but the Radeon does not. There are no conflicts in the device manager, and all of the drivers are up to date.
When I change the bios option to onboard card the Radeon adapter gets a signal but the other monitor cannot be detected and in device manager there is a yellow exclamation mark next to Standard VGA adapter and a code 10 error that states the device could not be started.
I have powered down, and unplugged every cable, I also tried to use the integrated VGA adapter to the Intel G31/G33/Q33/Q35 Graphics Controller but the computer will not even boot. I get
"System Halted
Attention Unsupported Video Configuration Detected"
I have two monitors, both work fine as standalone but Windows will not detect either as a secondary.
Please help me someone, I am so used to having my helpdesk email open in one monitor and all of my other work in the other monitor.
This computer is running an ATI Radeon HD 2400 Pro. It does support dual monitors...(I've had dual monitors active on this card before, but never on Windows 7.) But since installing windows 7, I can't even get it to detect the second monitor. I want to run the setup with the CRT as the primary monitor and the HD as the secondary.
I recently had an older HP Pavilion Media Center m7760n Desktop PC rebuilt. The old power supply fried the motherboard so I need to get a new power supply and motherboard. Here are my current specs.
Mainboard : Asus P5QPL-VM EPU Chipset : Intel G41 Processor : Intel Core 2 Duo E6420 @ 2133 MHz Physical Memory : 2048 MB (2 x 1024 DDR2-SDRAM ) Video Card : Intel(R) G41 Express Chipset (Microsoft Corporation - WDDM 1.1) Hard Disk : WDC (1000 GB)
[code]....
As you can see from above, the "video card" is actually integrated into the motherboard.The computer works perfectly except for one major problem. I have 2 monitors, one is 22" with 1680 x 1050 resolution and the other is a 15" monitor with 1024 x 768 resolution. At the back of my computer I have a VGA port and a DVI port. The 15" is connected to the VGA port and the 22" is connected to the DVI port.When first starting the computer, the 15" monitor was recognized as the primary monitor while the 22" was recognized as the secondary monitor. No problem. I simply went to the display settings and set the 22" to be the primary monitor and the 15" to be the secondary monitor. Unfortunately, this setting seems to reset as soon as I reboot the computer. The 15" is always set as the primary monitor on start up, forcing me to set the proper settings all over again. What's worse is that even after I have set the proper settings, they sometimes revert back when using Media Center or other programs. Worse yet, sometimes the monitors both go completely black ... as if the monitor settings were about to switch but got locked up some how.I'm assuming that perhaps the on board video has a primary port (VGA) and a secondary port (DVI) but even still, shouldn't Windows 7 be able to over-ride this and save these settings so that the monitor settings remain the same during startup and regular usage?
i just have a assignment to explore the memory management of win 7
i have a problem to find some resource about this case, because win 7 is a new OS,.
and i got some information that win 7 was using a new method of memory management that different with the past version of windows OS and make it work faster..
i very hardly to find what memory management method was used in this OS (win 7),..
can u help me to describe or give me some information to find about the new method of memory management in win 7...?
I'm using a television (32p) as a second monitor in extended mode so that I can watch a movie in the TV and play a game in the monitor (this was my main goal). Monitor and TV lays in two different ambients, both connected to the same pc, one by normal VGA cable and the other by HDMI. I managed to differentiate the audio output so that VLC player sends it's audio to the HDMI (so that only the TV plays it) and the rest of system sounds, media players and games outputs to the speakers (basically only the VLC audio is directed to another output device). I reached my goal so that I can watch a movie fullscreen in the TV and play a game in the monitor fullscreen too without any interference from one another (nor audio or video).
The thing is, because I have the TV in another ambient I can't actually see what's going on in it, as I just "throw" the VLC window to the TV from my main monitor. And here's the question: There's a way to see the TV's desktop in my monitor? Without having to set it as main monitor so to not really switch between desktops.. The perfect thing would be if I could see the TV's desktop in a window like in remote desktops applications.
I have AT&T DSL and it just drops out, I have a 2 wire router and the DSL and Internet lights will flash red when it drops, I have had this problem for almost a year and AT&T will run a useless test and tell me everything is fine. I have searched for 3 days trying to find a Broad Band Monitor to let me know when it drops and for how long, also how many times while I am at work, or just not on the PC.
I mean if i don't use partition all data (Programs, user data, Images, video, Music, ...) on one partition.I don't realy like that especial for backing up Data and System at deferent times and also for accessing data from a second operating system on same PC.So I use a second partition for User-Data (Private data, schools data, ...)and a third partition mainly for Media Data Pictures, Music and Videos Most of Music and Video is on an External HD.But in the folder "C:usersNAME" there are many folders like ".APP-NAME"and also Desktop, Download, My Pictures, .... I don't really miss them on my "Data" partition as my Musik is not in "My Music"my videos is not in "My Videos". But much applications "use" this Folders for default saving point or loading point,
I've been using Windows 7 now since 6th of May, and love it! I haven't had any troubles except 2, but this topic is meant for only one.
I remembered an application called Everest, it lists all of your hardware and information about it, OS and stuff, really nice. It also has tab for sensors, where you can monitor temperature.
When i was looking around in Everest, I found out somehow 7gigs. of virtual memory is available, and most of the time somewhere around 2gig. is being used. That was kind of weird, because I have 4 gigs of RAM, and most of the time only 25% is used of it. So, why would Windows prefer use of the virtual memory over the use of physical memory? I found out virtual memory could be managed in "advanced system settings". because 2.5 gigs of virtual memory was used most of the time, I thought: why not just completely disable paging file.
So it's: computer --> right click properties --> advanced system settings --> advanced tab --> performance --> settings --> virtual memory --> change.
So finally comes the problem, I have successfully disabled the paging file, and it says "total paging size for all drives: 0 mb". But when I go to Everest, it still says I have 7 gigs of Virtual Memory available, and it uses 2 gigs. I want to make full use of my physical memory!