Why does Windows 7 say my 32gb sandisk SDHC 4 is not suitable or does not have the caracteristics for readyboost. Is there anything I can do to change the cards caracteristics so that it will work with readyboost?
View 5 Replies
can i use a Kingston 32GB class 4 sdhc flash memory card with windows 7 readyboost?
if i can - i will only allocate 24GB as i have 8gb of RAM.
would there be any improvement worth the effort???
No sound with Win7 on my Asus P4V800D-X mother board. Is it fixable or do I need a new sound card?
View 3 Replies View RelatedRecently installed Win 7 Ultimate 64 bit. Everything works fine except my Belkin F5D5005 v2000 network card.
There are no drivers for it on the Belkin site and none of the older vista drivers work.
Is there a list somewhere of NIC's that are compatible with Windows 7 Ultimate 64bit since it looks like I'll need to buy a new one.
The on board network point on my motherboard works fine (realtek NIC on an Asus Fatality fp-in9 SLI mobo) but has been faulty for some time now.
Any advice?
There is no ethernet port in my apartment, so I need a wireless card that will work without the need to install drivers from the internet first. Are there any wireless-G cards out there that will work with 64-bit Windows 7 out of the box?
View 1 Replies View RelatedI am looking for Windows 7 compatible video capture(tv tuner) PCI interface cards.
Can you please suggest the same?
wondering whether or not I can hook up two Galaxy Gtx560 1gb Cards to my Asrock h61M/u3s3 ?
View 7 Replies View RelatedHas anyone tried ReadyBoost on a virtual Windows 7 machine on a Mac running VMWare Fusion?
I am running Windows 7 on a Macbook Pro with 8GB of RAM and the Virtual Windows machine really slows everything down globally. I have tried configuring the Windows VR with 2GB, 1.5GB and 1GB of RAM. Configuring the virtual machine with more than 2GB of RAM really slows down the Mac. Hoping that ReadyBoost might improve things.
The flyer that came with this month's PCA included a tip to utilise a blank USB flash drive for virtual memory. When I go to Properties/ReadyBoost on the USB drive, it says "This device cannot be used by ReadyBoost"Then it says "ReadyBoost is not enabled because the service responsible for ReadyBoost (Sysmain) has been turned off on this computer. An administrator can turn the Sysmain service back on"When I searched, including Microsoft website, there is no recognition of the term Sysmain.
View 9 Replies View RelatedI just read about USB 3.0 External Hard Drives.Are Thumb Drives next?Is a 5GB/sec ReadyBoost Drive in the future?
View 9 Replies View RelatedI'm running Windows 7 x64 with a Quad Core and 4GB of RAM. I've enabled Readyboost on two USB devices of 2GB each I had laying around: a SanDisk Cruzer Micro, random read speed is 5341 KB/sec, random write speed is 3068 KB/sec. And a Kingston FCR-HS219, random read speed is 3412 KB/sec, random write speed is 3739 KB/sec. Not much, but should suffice to give it a try.
While booting, I saw and improvement. But the thing is I have my computer on 24/7 so I don't care that much about boot time. And I don't see a lot of activity of these devices once is turned on. Specially over the pendrive.
Is it because I have > 2GB RAM? Or is it because they are too small?
Would I benefit if I create a pagefile over one of these devices instead of Readyboost?
How can I "measure" this?
Is there a guide regarding Readyboost and USB devices?
I have a new Notebook, an LG X140, with Windows 7 Home Premium ... activated as Genuine.It only came with 512 MB of RAM so I decided to use ReadyBoost and a 4 GB USB Drive to add more RAM.I selected "Dedicate this device to ReadyBoost" which selected 3851 MB. It only actually created an extra 2 GB of RAM. I believe I understand why there was only 3851 MB available and why it only could create 2 GB of RAM from that. so that isn't so much of an issue for me.I then used a 1 GB SD Chip which is ReadyBoost Compatible and added that to ReadyBoost the same way, hoping that I could push it to 4 GB of RAM ... however my computer still only shows 2 GB of RAM. I have tried swapping different USB Drives and SD Cards but with no success, I can't seem to get my computer to recognize any more than 2 GB of RAM.
View 9 Replies View RelatedI know memory can help save some battery life since it decreases the load on your CPU, and I know Readyboost acts like memory, but I also know USB drives can drain your battery. So my question is, would Readyboost help with battery life or drain it since its a USB?
Aka when I'm running off battery and I want the battery to last as long as possible, should I plug in my USB to use Readyboost or just keep it out?
How to Setup and Use ReadyBoost in Windows 7 ?
View 0 Replies View RelatedI have been running build 7260 for awhile on my Asus notebook (see system spec) and so far have not had too many issues with it. Since I have done several succesive upgrades: Vista Business > Windows 7 build 7227 > Windows 7 build 7260 I have noticed some bugs creeping in (apps and games are crashing periodically or not loading correctly, gaming performance could be better). I attribute this to the string of successive upgrades.
I am going to wipe the drive and do a clean install of either the 32 or 64 bit RTM build in the next few days as it becomes available. One of the main goals is to increase performance with both applications and games. I use this laptop for work doing web development and heavy photoshop and graphics intensive work. I typically have many applications open at once using quite allot of system resources.
For this project I am going to:
A: Add another 2gb of ram to bring the total from 3gb to 4gb, or
B: Add a fast 16gb sd card to the system for the ReadyBoost feature, probably using around 6 to 9gb for this feature
For me to add the extra gig of ram it becomes more necessary to install the 64 bit build. If I use the 16gb sd card for ReadBoost, I can probably stick with 32 bit. None of my apps are currently 64 bit anyhow so I am not sure 64bit is the way to go right now.
I would like to hear people's thoughts on this and what others experiences have been especially using ReadyBoost on systems with over 2gb of memory..
I just came upon the concept of using readyboost with my computer since I usually run quite a few programs in the background while I'm gaming. I know it wont help much but just a little increase in performance is better than nothing.
I was just curious how much memory can be used on 1 flash drive?
I just bought a 16 GB Sandisk from Best Buy and when I used Readyboost with it the cap was 4 GB. I wasn't sure if the drive I bought wasn't designed to go higher or my USB port couldnt handle it. Then I wondered if the file format the drive was in was capping it so I can confused and thinking of buying a better one possibly designed for the readyboost.
How do I remove this file from myflash drive USB
View 1 Replies View Relatedtrying to get superfetch-readyboost to work with no luck. Decided to use my back up disk i created, how do i get the comp. to run the disk ? Dell, 4010, Windows 7 home premium..
View 1 Replies View RelatedReadyboost is NOT virtual RAM from a flash drive.Readyboost is NOT RAM at all.Readyboost is a cache used by your hard drive.Basically it copies stuff you normally use to the speedy Readyboost cache, where it can be used faster.Readyboost give an all round performance boost, and is more noticeable with older, slower hard drives. The more you have, and the faster it is means more boost.Readyboost yields the most with small file browsing, boot up time, windows operations, and some programs you use.I have 20GB of readyboost, I got that instead of upgrading my HDD to a SSD or hybrid.
View 6 Replies View RelatedI've just posted a new video that covers Windows ReadyBoost to the Windows 7 Forums Video section.
View 1 Replies View RelatedI have a new 8 GB memory stick and it passed the readyboost test - initially. But I wanted to dedicate the device to readyboost so I reformatted to NTFS (was FAT32 initially) and now all I can get is "This device cannot be used with Readyboost". I have tried a command line test that gives me a read speed of 4.8 MB/S which according to the specs I have seen is fast enough for Readyboost.
View 3 Replies View RelatedI like a clean notification area, and one thing that's always bothered me is the "Safely Remove Hardware and Eject Media" icon for my ReadyBoost flash drive. I don't understand why it doesn't ignore all ReadyBoost devices in the first place. Any fix for this that doesn't involve disabling the function altogether?
View 4 Replies View RelatedI have an old HP Proliant PC that I upgraded to Windows 7 Professional. There are only two PCI-X slots (one half height and the other full height). This is not PCI-Express or plain PCI.i need to add a video card to support a higher resolution monitor. There is an ATI Radeon 9200 PCI-X card out there, but it is not supported with Windows 7. Since this card type is more than 10 years old and operating systems have moved on, I need to know where to find a new PCI-X graphics card (or used) that will support higher resolution. If a standard PCI card will fit in the slot, will it work and what is the down side.no drivers for Windows 7 with PCI-X.
View 4 Replies View RelatedI recently built a new machine that I have three monitors for. When I only had two monitors I had this card installed: Newegg.com - PNY XLR8 VCG98GTEE5XEB GeForce 9800 GT EE 512MB 256-bit GDDR3 PCI Express 2.0 x16 HDCP Ready SLI Supported Video Card - Desktop Graphics / Video Cards
This card works perfectly fine and I had no issues with it and I plan to continue using it. However, now that I have three monitors and I need another video card I'm running into a lot of issues. I tried installing another PCIe 16 card I had lying around but my setup didn't seem to recognize the new card. I do not have the exact model number on that since it was given to me, but I believe it was a GeForce 6 series card. I also tried a PCI ATI Radeon card that I had laying around found here Newegg.com - SAPPHIRE 100945L-BK Radeon 7000 64MB 64-bit DDR PCI Video Card - Desktop Graphics / Video Cards
This card showed up in the device manager as a Standard VGA adapater but in the properties it had an error saying "The device could not start".
So I guess my question is this: What is the cheapest way to get three monitors working on my windows 7 64 bit machine? I want to use the first card I linked to and one other one.
Would this card work? [URL] - PNY VCG84512SPEB GeForce 8400 GS 512MB 64-bit GDDR2 PCI Video Card - Desktop Graphics / Video Cards
Here is my motherboard in case that'll help: ASRock > Products > M3A780GXH/128M
sound blaster works with 32 bit windows7 but not 64 bit windows 7
View 2 Replies View RelatedUpgraded Dell XPS 710 (2006 build) from Windows XP to 7. Only issue is no sound from the Sound Blaster sound card. I've tried ALL trouble- shooting tips from Microsoft and Sound Blaster. I'm able to hear sound when I perform a sound test during SB's setup through all my 5.1 speakers. Otherwise just crackle or silence. Do I just need to break down and buy a new sound card?
View 4 Replies View Relateddo you know any tv capture card made for windows 7 o/s
View 1 Replies View Relatedi have a question. i am running a quad screen set-up. i have been running windows 7 32-bit. with 2 video cards1 pci-e ati radeon hd 4350 now it was working great in windows 7 32-bit, but ever since i upgraded to windows 7-64 bit. its not working at 100%now i have been reading alot on this forum that alot of people have trouble getting the fx 5200 working. after trying many different drivers i finally was able to get it working. the only catch is that. i had to turn off aero and disable other aero features so it can run with better performance.but even after doing that. the ony problem i have is that videos such as in Internet. run slow seem to lag a little and worse when i put it on full screen.i figure its the card because its so old and its a pci card
View 5 Replies View Relatedany computer running windows 7 but this new laptop i have (hp g6 core i5) seems to be continually corrupting memory cards out of my camera! when i first insert the memory card and view the pictures and go to change their orientation; windows comes up with a message saying it can't change it because the picture is no longer there! when you go back to view the folders on the card they appear as symbols as they have been corrupted! the first time it happened i downloaded (and purchased the key) for recovery which seems to do a good job of recovering the images. its really annoying me as to why it is happening! i'm now very careful and transfer images from the sd to the laptop straight away and safely remove the card afterwards. the laptop also corrupted a different memory card when the lid was shut and re-opened but im assuming this is because the computer was hibernating without the card being safely removed.has anybody else had this problem and if so how can it be sorted?
View 7 Replies View Relatedwhere can I find a list of these cards, I have looked all over but such a list does not seem readily available.
View 3 Replies View RelatedI have Creatacard Gold that use a lot and love, but I just changed to window y and it won't run I need an upgrad so I can access my addresses and stuff I have stored there.
View 6 Replies View Related
