There is no ethernet port in my apartment, so I need a wireless card that will work without the need to install drivers from the internet first. Are there any wireless-G cards out there that will work with 64-bit Windows 7 out of the box?
View 1 RepliesRecently installed Win 7 Ultimate 64 bit. Everything works fine except my Belkin F5D5005 v2000 network card.
There are no drivers for it on the Belkin site and none of the older vista drivers work.
Is there a list somewhere of NIC's that are compatible with Windows 7 Ultimate 64bit since it looks like I'll need to buy a new one.
The on board network point on my motherboard works fine (realtek NIC on an Asus Fatality fp-in9 SLI mobo) but has been faulty for some time now.
Any advice?
can i use a Kingston 32GB class 4 sdhc flash memory card with windows 7 readyboost?
if i can - i will only allocate 24GB as i have 8gb of RAM.
would there be any improvement worth the effort???
Why does Windows 7 say my 32gb sandisk SDHC 4 is not suitable or does not have the caracteristics for readyboost. Is there anything I can do to change the cards caracteristics so that it will work with readyboost?
View 5 Replies View RelatedNo sound with Win7 on my Asus P4V800D-X mother board. Is it fixable or do I need a new sound card?
View 3 Replies View RelatedI am looking for Windows 7 compatible video capture(tv tuner) PCI interface cards.
Can you please suggest the same?
wondering whether or not I can hook up two Galaxy Gtx560 1gb Cards to my Asrock h61M/u3s3 ?
View 7 Replies View RelatedI have vhs-c format tapes whereas I want to transfer them over to Windows 7 64 bit.
Currently my software/hardware will not work. Do you know of any usb type hardware that will work with it?
I have been scouring the interwebs since successfully installing Windows 7 64bit RTM last night when my XP box got the "ntfs.sys corrupt or missing" and I could not for the life of me restore it. Screw XP, it was time to install Windows 7 anyhow right. Every piece of hardware was detected and installed except for my wireless card.
I have a AirNet AWD154, Linkskey LKW-G553, and Airlink 101 AWLH3026T.
Luckily I had 3 total so I was sure one was bound to work, but no, not even after downloading the newest drivers from the manufacturers website. Since at least 2 of the 3 use Marvell Libertas chipsets I figured getting that latest (3.1.1.7) generic driver would work.
In all cases I either get a "no compatible driver found at this location" or "installed but cannot start".
I want to format my laptop and I thought that windows7 would be a nice solution.
However in the acer website it seems that my laptop is not compatible with Windows 7.
What shall I do?
Is there any trick?
Could you say us what's the best Compatible firewall for win 7 in your idea?
View 9 Replies View RelatedI just burnt my Windows 7 install .iso to a DVD and rebooted my computer ready for the installation. I wait for the windows files to load, then when the bar is full, the screen goes to a blue screen with this message:
"...The BIOS in this system is not fully ACPI compliant. Please contact your system vendor for an updated BIOS.
Technical information:
*** STOP: 0x0000000A5 (0x0000000000001000, 0x0000000000000000, 0x00000000FFFFFFFF, 0x0000000000002040)"
Please help me sort this out, I have a fairly new computer that has been running XP SP3 without error thus far, and I am very keen to make the leap to Windows 7.
I've been experiencing this problem over a year ago.When I changed home last year, I wasn't able to connect my desktop to the router through cable, so I acquired a Wireless Adapter SMC EZ Connect G USB. It worked, but the connection was too slow. I couldn't play, I couldn't download anything (5kb/s average speed) even with good signal. I tried that adapter on my laptop, HP 6840ep with Windows 7 x64 aswell and the adapter worked perfectly. A error "Code 10 (This device cannot start)" apeared and can't even update or install drivers now. I tried all PCI slots, I tried all USB ports, but nothing.
View 1 Replies View RelatedIs Microsoft Office 2003 compatible with Windows 7?
View 7 Replies View RelatedI installed a Radeon ATI XFX HD 4650 PCI, 2DDR, 1gig, video card into my vista desktop 3 months ago, and it worked perfectly. I only needed it to run 2 mintors a dvi and a vga. Yesterday I attempted to install Windows 7 and both screens went black.The device manager was unable to locate any video cards at all (the original had been removed).
I called Dell, and they told me that the card was not recognized, and therefore not compatible with "7". Then I called Radeon, and they said it was definitely compatible. The bottom line is I had to do a system restore to get back to Vista where all worked well again. i really need "7".
im using windows vista and i bought 'Retail Plus Wireless N USB Adapter' and used it on my Desktop for about a year.and im planing to install windows 7 but the problem is that i dont know if the adapter is compatible with windows 7 or not
View 7 Replies View RelatedWhich wireless ''N' usb adapters are compatible with Windows 7 64-bit. The linksys WUSB600N ver. 1 will not connect any faster than 54mbs.
View 1 Replies View RelatedI got windows seven about a week ago and i have yet to find a compadible wireless adapter.
Are there any windows seven compadible wireless adapters on the market? If so are there any pci express wireless adapter cards that are compadible with windows seven?
im using windows vista and i bought 'Retail Plus Wireless N USB Adapter' and used it on my Desktop for about a year.and im planing to install windows 7 but the problem is that i dont know if the adapter is compatible with windows 7 or not.
View 5 Replies View RelatedMy 80211n wireless adapter does not pick up my clear wireless router. My OS is windows 7. My router has to be connected by Ethernet cable then it is exceedingly slow. Best location for router is in attic.
View 2 Replies View RelatedMy 80211n wireless adapter does not pick up my clear wireless router.My OS is windows 7.My router has to be connected by Ethernet cable then it is exceedingly slow.Best location for router is in attic.
View 1 Replies View RelatedI'm also using two devices, a D-Link Dir 600 and an EnGenius ECB3500 as a repeater bridge. Do I have to take that into consideration when buying a wireless card?
View 2 Replies View RelatedNo compatible hardware found message while installing wireless drivers for dell vostro 1015 laptop.
View 1 Replies View Relatedsince i preordered my copy of win 7, i figure i should get a wireless adapter that truly works with x64 Windows 7.
Can anyone make any recommendations as to what adapters work flawlessly with Windows 7 x64? I need to get rid of this linksys one... too many crashes.
I have a Dell Vostro 1015, I need to install wireless drivers on it.While installation I get a message saying "No compatible hardware found. The software you are attempting to install is not supported on this system. The software will not be installed. Setup will exit now". I am trying this from past 5 months. I have tried it on both 64 and 32 bit windows 7
View 2 Replies View RelatedI've just built a new core-i7 system running Win7 64 bit, but none of my existing wireless adapters are able to get a working internet connection. I have an Airlink wirelessN, Dlink wireless g, and an Encore PCI card. None of it worked, and after some Googling, I found that this is a widespread problem - many of these devices simply do not work in Windows 7 64 bit.
I have no clue if this is a drivers problem that simply will take some time for manufacturers to address. But Windows 7 beta has already been out for a while, so this is discouraging.
Are there any existing known reliable wireless adapters (specific models) that work with Windows 7 64 bit? I'm desperate to find one that works, preferably something I can get at a store (Frys or Best Buy) so I can test it immediately.
When I boot my PC with win 7 64 bit home prem., It says no keyboard present. It used to find it on rebooting. It is a Microsoft laser 6000 keyboard, wirerless. I have to hook another PS2 keyboard up to enter the setup. Can any one shed some light on this.
Asus Sabertooth 55i
8 gigs of Kingston PC3 10600
Intel I7 860 Quad socket 1156
Win 7 Prof. 64 Bit
Thermotake ESA 850 Watt
Aluminus Tower
EVGA Geforce3 GT 220/ 1 gig memory
WD 500 Gig Sata
I have an Asus P5K-e/WiFi AP and am interested in installing Windows 7. I looked on Asus' support site and they dont have a wireless driver for Windows 7, only a LAN driver.
Anyone come across a wireless driver for this mobo for Windows 7?
I have purchased and downloaded both 32 bit and 64 bit Windows7 Professional (no CDs or media here only download version)
I sucessfully upgraded from Vista 32 to Windows 7 32
Then I upgraded my hard disk (140Gb 500GB) and RAM (3GB to to 4GB)
Now I would like to go from Windows 7 32bit to 64bit
When I try and run the Windows 7-P-retail-en-us.x64.exe file it upacks the box then stops with this error:"We are unable to create or save files in the folder in which this application was downloaded. Please check the folder properties to make sure that you have security permission on the folder to write flies and that that folder is not read only".
I am the System Admin and I have full rights, and have moved the exe and the setup box files to My Documentsand I have modified the directory properties/attributes but I still get the same error over and over.
I searched the posts and some people stated one needs a clean install others say you can upgrade from any version so I am trying the upgrade here especially since the upgrade from Vista 32 to Windows 7 32 was smooth and did require all the extra work of a reinstall.
Is it possible to upgrade in place from Windows 7 32bit to Windows 7 64bit.
Is it better to do a clean new 64bit install?
I purchased the Win 7 Pro Upgrade 32bit via digitalriver, but I've been doing some reseach and probably should have selected the 64bit version.
- Any ideas how I can get the 64bit version?
- For those who ordered the 32bit back-up disc kit for the extra $15 and have received it, does it come with both 32bit & 64bit?
- I've already installed and activated the 32bit version, but when I go to install the 64bit version, will I need to / is there a way to deactivate my initial 32bit install or will this not matter?