No Win7 64bit Drivers For 3 Different Wifi PCI Cards
Oct 8, 2009
I have been scouring the interwebs since successfully installing Windows 7 64bit RTM last night when my XP box got the "ntfs.sys corrupt or missing" and I could not for the life of me restore it. Screw XP, it was time to install Windows 7 anyhow right. Every piece of hardware was detected and installed except for my wireless card.
I have a AirNet AWD154, Linkskey LKW-G553, and Airlink 101 AWLH3026T.
Luckily I had 3 total so I was sure one was bound to work, but no, not even after downloading the newest drivers from the manufacturers website. Since at least 2 of the 3 use Marvell Libertas chipsets I figured getting that latest (3.1.1.7) generic driver would work.
In all cases I either get a "no compatible driver found at this location" or "installed but cannot start".
View 4 Replies
ADVERTISEMENT
Nov 2, 2009
I have vhs-c format tapes whereas I want to transfer them over to Windows 7 64 bit.
Currently my software/hardware will not work. Do you know of any usb type hardware that will work with it?
View 1 Replies
View Related
Dec 4, 2009
There is no ethernet port in my apartment, so I need a wireless card that will work without the need to install drivers from the internet first. Are there any wireless-G cards out there that will work with 64-bit Windows 7 out of the box?
View 1 Replies
View Related
Sep 4, 2012
tell me dell n5110 inspiron i3 about all the drivers i need all the drivers?
View 2 Replies
View Related
Jan 6, 2013
Dell inspiron n5110 wifi drivers for windows 7 64 bit free download
View 2 Replies
View Related
Nov 8, 2009
I have purchased and downloaded both 32 bit and 64 bit Windows7 Professional (no CDs or media here only download version)
I sucessfully upgraded from Vista 32 to Windows 7 32
Then I upgraded my hard disk (140Gb 500GB) and RAM (3GB to to 4GB)
Now I would like to go from Windows 7 32bit to 64bit
When I try and run the Windows 7-P-retail-en-us.x64.exe file it upacks the box then stops with this error:"We are unable to create or save files in the folder in which this application was downloaded. Please check the folder properties to make sure that you have security permission on the folder to write flies and that that folder is not read only".
I am the System Admin and I have full rights, and have moved the exe and the setup box files to My Documentsand I have modified the directory properties/attributes but I still get the same error over and over.
I searched the posts and some people stated one needs a clean install others say you can upgrade from any version so I am trying the upgrade here especially since the upgrade from Vista 32 to Windows 7 32 was smooth and did require all the extra work of a reinstall.
View 1 Replies
View Related
Oct 28, 2009
I purchased the Win 7 Pro Upgrade 32bit via digitalriver, but I've been doing some reseach and probably should have selected the 64bit version.
- Any ideas how I can get the 64bit version?
- For those who ordered the 32bit back-up disc kit for the extra $15 and have received it, does it come with both 32bit & 64bit?
- I've already installed and activated the 32bit version, but when I go to install the 64bit version, will I need to / is there a way to deactivate my initial 32bit install or will this not matter?
View 1 Replies
View Related
Nov 1, 2009
I have an Asus P5K-e/WiFi AP and am interested in installing Windows 7. I looked on Asus' support site and they dont have a wireless driver for Windows 7, only a LAN driver.
Anyone come across a wireless driver for this mobo for Windows 7?
View 5 Replies
View Related
Oct 28, 2009
I have two different ATI cards installed in one system, each with their own 22" HP LCD. One is an ATI FireGL V5600 for my CAD applications and the other is an X1900XT for Left4Dead. When I ran Windows Update after I installed Windows 7, it immediately downloaded an updated driver for the V5600 (8.623, I think) but when it installed it, it disabled the X1900XT.
I went to the Device Manager, uninstalled the X1900XT, then Scanned for Hardware Changes, it finds the X1900XT, installs the driver and it works again. Unfortunately, it also reverts the driver for the V5600 back to 8.56.1.15 which isn't even a valid driver for the V5600 as seen on this page.
I'm not sure why I can't have independent drivers for each card. I know for a fact that this is supported in XP as I have my system dual booting with XP and it work perfectly there (see photo 1 and photo 2 it's hard to tell, but both of those screenshots are from XP with each card having independent drivers). The downside is that my CAD apps don't recognize the V5600 with driver 8.56.1.15 as the workstation card it is, and my graphics are severely crippled in those apps.
I would like to report this to Microsoft, but unlike in RC1 there is no way to report a bug.
View 3 Replies
View Related
Oct 20, 2009
Can I have the XP Pro 32bit upgrade version and install the Win 7 Pro 64bit upgrade version?
I've not been able to get a clear answer on this.
Please note I'm not trying to run an upgrade from xp to win 7. I know it will be a clean install. That said, will Win 7 Pro Upgrade allow me to install the 64bit version if it sees a 32bit upgrade version of XP? People go off on tangents about upgrade and clean installs.
View 27 Replies
View Related
Nov 17, 2009
I upgraded from Win XP to Win7 Pro, but used the 32bit disk. What do I need to do to upgrade using the 64bit version of Win7 pro, (both 32bit and 64bit upgrade disks were sent in my upgrade purchase). Works great but want to try the 64bit version.
Do I need to reinstall WinXP to do a clean install, or can I just use the upgrade version 64 of Win7 without the XP?
View 9 Replies
View Related
Jun 8, 2009
help me about the driver of D-Link DSL210 driver for Windows 7 64bit
View 2 Replies
View Related
Jun 20, 2009
Ok using my system as normally, then just few hours ago, some odd things started to happen.
Firstly cannot alt-tab, it just doesn't stay, secondly I can't get the preview of the application on the task bar won't appear correctly. Each time I move the mouse on task bar, the preview flickers as it were.
Now the last things I installed on my system was Firefox RC1 and new nVidia drivers, now removed RC1 of firefox, updated the drivers as I thought it was a graphical error but no luck, anyone else the same issues?
View 8 Replies
View Related
Oct 25, 2009
I have 3 computers. The 1st computer has a wired connection to the 1st wireless router. The 2nd computer has a wireless connection to the 1st router via Wireless LAN card. and the 3rd computer has a wired connection to the 2nd wireless router. The 2nd wireless router is connected to the 1st wireless router via repeater bridge with DD-WRT.
The problem is the 1st and 2nd computer connect to the homegroup just fine, but the 3rd computer can't connect to the homegroup, yet all the computers and see each other on the workgroup network just fine and I can share files as long as I share individual folders.
Also the 1st and 2nd computer can use remote desktop between each other just fine, but the 3rd computer can't be used via remote desktop, yet I can use the 3rd computer to use the first 2 computers with remote desktop.
Any ideas on what this might be?
BTW, Computer 1 and 2 are Windows 7 32bit and Computer 3 is Windows 7 64bit. But I get the same problem when all computers are 32bit.
View 2 Replies
View Related
Aug 2, 2009
After that success with Skype into Win7 decided to have another look at the programs I had problems with..DataDirector 2 ; EzyChart ; EzyManager...I installed an Acronis backup file, the original install with only Acronis up and running..what do you know!! have installed those 3 program now into Win7 64bit..would cost way over A$1000. to replace these "must have" for me programs plus heaps and heaps of work to transcribe Tax nec. data..
DataDirector went in easly but the other 2 took a bit of fiddling..I did have these installed in Virt. XP mode but even though MS Virt. PC is the best I have used by a long chalk, there are delays starting it up and it will hang sometimes when you first click into it..increaded Ram allacation to 1g helped a little..much much better to have all the programs in Win7
Just a quick word on Vista..have used this program from when first out, some problems with driver to start but since have found it a great program for me ..stable and better than XP.. but am finding Win7 better than both especially 64bit.... has to be the way to go I remember 8bit and 16bit..Did anyone see that program on Quantam computers?? they will be like an ocean liner to a rowboat..all I have to do is live long enough!!
View 1 Replies
View Related
Jul 19, 2012
i want to download graphics card drivers for dell vostro 1510 .. i m using win7, 32bit..
View 5 Replies
View Related
Sep 26, 2009
please help me to find a relevant driver for my notebook. i am useing win 7 64bit system, already 5 hours i cant install that stupid Conexant Audio Driver CX20561-15ZC.
View 0 Replies
View Related
Dec 9, 2009
Getting the following "issue" and not sure how to proceed?
I went to intel and installed all the latest Windows 7 64bit drivers
I verified I have the latest bios from intel
I have the Intel DP35DP
I also am getting a PCI Simple Communication Controller that I can't find a driver for..I assume this is the old dell modem I have installed (Conexant RS56/SP-PCI - R6793-17)
Address a problem with Intel Active Management Technology
Your version of Intel Active Management Technology isn't compatible with this version of Windows.
Go online to the following article for more information about possible solutions to this problem:
Click to go online to the Microsoft website for the KB article
Which version of Windows am I using?
You are using Windows 7.
Computers that use Intel vPro technology may have devices that are unrecognized in the Windows 7 Device Manager.
View 1 Replies
View Related
Dec 24, 2009
I have a new (replacement for a failed drive) Hitachi 500GB HDD that I'm trying to install Windows 7 64 bit on (full install disk). I have Win XP 32 on drive D: of another drive and want to dual boot. I used PMagic to partition the new drive into 2 250 GB partitions, the first as C: drive, active and primary---formatted NTFS. Thinking I would install on that partition.
When I run install on Windows 7 64 I get to the window where you can select upgrade or custom and I select custom install and select the c: drive. I then get a cannot find a system drive error message. I went bak and removed the partitions thinking maybe it would work on unallocated drive space same error message. I deleted the partition inside Windows 7 from the same screen and formated it there too and still get the same message. Diagnostics show that the drive is good. What am I doing wrong?
View 2 Replies
View Related
Jan 12, 2010
I bought my laptop about a year ago with Vista 32-bit pre-installed even though it is capable of running 64-bit, and now I'm looking to upgrade to Win7 and would like to make use of it's 64-bit capabilities. Is there any easy way of going about this? Since I got the computer with it pre-installed, it did not come with the 32/64-bit installation CDs for Vista. I can buy the Win7 64-bit upgrade CD from my campus store with my student discount, so I was hoping there would be a way for me to do this easily.
View 14 Replies
View Related
Aug 18, 2009
I decided to only install the ethernet driver for the time being till i read more reports on the others. The ethernet driver is a good few months newer than whats provided in the Windows 7 RTM and works fine!
View 6 Replies
View Related
Dec 23, 2009
i tried the hands on driver in the russian website but it didn't work. pls. send me a link or something...
View 7 Replies
View Related
Aug 30, 2009
I upgraded from Vista64 to Windows7 64bit final (not a clean install) on an HP M9300T desktop.
Everything worked fine, until the final restart. System will start, I get the colored thingees, I get the Welcome screen, when it should go to my desktop, I get only a black screen with the arrow in the middle. Even if I boot into safe mode, I still only get the black screen...
I've tried reinstalling x4.
I can hit CRTL+ALT+DEL and get to the task manager, and I can run task, programs go on-line etc.
Ran the Nvidia control applet, the monitor is set to native resolution @ 59hz. Don't know if that is causing a problem, I've changed it but it doesn't seem to stay set.
Other than the DVI output I've tried VGA and HDMI outputs to several different screens from the GS 9800 video card, no change.
I even browsed to the Nvidia site and installed their latest Windows 7 64bit WHQL drivers. I've disconnected everything except the keyboard, monitor and mouse, I've pulled every card out of it except the video card, no change?
View 1 Replies
View Related
Oct 23, 2009
Im thinking I might regret. I was told its better to build ur own, so I did and nothing but problems! I had vista 64 / xp 32 bit bit and was having nothing but problems trying to get my video cards to work right! So someone told me to get Windows 7 and Ill have no problems. Wrong!
My problem now is that when I turn on the computer it doesn't give me the option to chose which operating system it just loads into Windows 7. Does anyone have an idea on how to fix this? When I hit the (my computer) option it sees Xp as the D drive. When I loaded Windows 7 I just threw the disc in and followed the directions. I didn't reformat anything cause the disc does it for u.
View 5 Replies
View Related
Dec 1, 2009
Havin a problem with operation Flashpoint 2 & win7 64bit. when I launch the game everything runs fine up to when I load the first mission. at this point the game crashes to desktop with the message "game.exe has stopped working". This makes no sense to me as I have been running this game on this Rig for a month now with no problems whatsoever.
I have been running the game through a 9600gt gpu but it sadly died a couple of weeks ago which meant I had to step down to my previous 8600gt. This is where I believe my problem lies although I have checked the game requirments and the 8600gt easily fits the requirments needed. can somebody please shed some light on a possible solution to this very annoying problem?
View 2 Replies
View Related
Nov 21, 2009
i am looking to build a new PC and will include a Corsair SSD.. need some information re TRIM support..Win7 I understand supports TRIM but do you need to install a program or is this already in Win7?
View 9 Replies
View Related
May 2, 2011
My girlfirends new PC has Windows 7 64-bit on it, now getting on the internet is a real headache! every time I click the network list at the bottom, and select the network I want, it will connect but if I make it show the the list of networks again it will loose the network. When it does connect after a while it might drop off then trying to reconnect come up with "the settings do not match" I have to change them, then change back to get it to connect again but if I keep an eye on it while it connects it fails.
Windows 7 Home 64-bit
Disabled the IPv6 setting
I tried the wifi client that comes with the wifi card
I tried changing the router settings
It's WPA2 security
View 3 Replies
View Related
Dec 1, 2009
I have a simple question, I recently fresh installed Windows7 and was wondering if I should Install the new mobo drivers from the ASUS site (i have an ASUS P5Q Pro) or should I just keep the current microsoft drives for all the chipsets/lan/etc. The only Thing I installed was the Realtek sound driver. Would there be any advantages to install proper drivers? because right now my computer runs perfectly stable and smooth using the Windows7 ones.
View 5 Replies
View Related
Oct 28, 2009
I have a GTS250 made by EVGA. When I installed windows 7, it knew it automatically.
I would prefer to leave it alone, but I am I missing out? Will it perform better with the Drivers from EVGA?
View 3 Replies
View Related
Nov 1, 2009
I'm having some problems with my motherboard now with Windows 7. It's an Abit motherboard and I'm getting a warning for the action center which states: "Your power management system is missing a driver" and suggest the uGuru 3.1X.
Now is where things get annoying, Abit is shut down and their driver downloads are dead. Even if they were alive, there has not been made any utility for Windows 7 as it weren't out at the time they closed.
So I have a few questions I hope some of you can answer:
- Is it at all vitial to have this driver?
- Is it anywhere I can get one which work with Windows 7?
if none of the above
- Can I somehow force the action center to ignore this "problem"? I hate having unsolved problems poping up there
A little additional question, anyone else having stability problems with the most recent windows messenger client on Windows 7 64bit?
View 2 Replies
View Related
Dec 3, 2009
Does any one have a fix for a Canon D860 Image class multifunction copier/printer?
It is recognized as a USB connection, but Canon has no windows 7 64 bit driver for it. I also hear the printer is being discontinued even though the price is the same as I paid for 3 years ago. It is a great photocopier and printer. Well it used to be a good printer!
I have already tried windows updating and I have driver detective as well. Struck out on all fronts. I looked at someone else's thread and I sent Canon support yesterday. They have not responded although they acknowledged the E-mail. Yeah, I guess this old bird is being sent to the old age home.
View 0 Replies
View Related