Dual Boot Problem With Win7 64bit / XP 32bit
Oct 23, 2009
Im thinking I might regret. I was told its better to build ur own, so I did and nothing but problems! I had vista 64 / xp 32 bit bit and was having nothing but problems trying to get my video cards to work right! So someone told me to get Windows 7 and Ill have no problems. Wrong!
My problem now is that when I turn on the computer it doesn't give me the option to chose which operating system it just loads into Windows 7. Does anyone have an idea on how to fix this? When I hit the (my computer) option it sees Xp as the D drive. When I loaded Windows 7 I just threw the disc in and followed the directions. I didn't reformat anything cause the disc does it for u.
View 5 Replies
ADVERTISEMENT
Dec 11, 2010
I am trying to dual boot 7 64bit and xp 32bit I have 7 up and running on a 90gb ssd and I have two 500gb WD drives in RAID 0 where I am wanting to create a 60gb partition to run xp. I have setup my raid array in bios but for some reason the boot option is grayed out. I installed xp anyway and got it to boot but as soon as I start loading drivers or updates then it crashes mother board is a xfx750i.
View 5 Replies
View Related
Nov 3, 2009
I have Windows 7 Home Premium 64 bit upgrade currently installed on my pc, but I am having wireless internet installation problems. TP-Link WN851N adapter (No Win 7 drivers availabe, but it works fine with Linux Ubuntu 9.14).
My ethernet connection works fine.
So as a process of elimination (I am on holidays and heve to much spare time lol) I want to install Win 7 32bit in dual boot with Win 7 64 bit.
Can it be done?
View 1 Replies
View Related
Jul 31, 2010
I have installed w7 64bit to take advantaqe of the 4GB ram. My scanner and a few progs I use do not work even with compatability mode. On another pc with w7 32bit the scanner and progs work. Would it be possible to install both W7 32bit and 64bit on the same pc either on different partitions or hard drives and use either? If this is not possible and I have to use just 32bit is there a simple way of converting from 64bit to 32bit without totally removing the installation?
View 7 Replies
View Related
Jan 28, 2011
I had Windows XP and Windows 7 32-bit dual boot set up on my system. I decided to do away with XP and install Windows 7 64-bit instead. But I can't fully migrate to 64-bit yet as some of my old software don't run in 64-bit. So I clean-installed Windows 7 64-bit after formatting the XP partition. But now I no longer get a boot menu to boot into Windows 7 32-bit. I can only boot into 64-bit. But the 32-bit partition is in tact. Is there any way I can get a boot menu with options to use both 32-bit and 64-bit versions?
View 9 Replies
View Related
Jul 17, 2010
Basically i would like to know how to have a dual boot on my PC, where when i start up my PC it automatically starts up the 64bit version of Windows 7 but if i choose i can easily change to the 32bit without a hassle.
2nd Question, if i make a dual boot PC i would have to split my HDD im guessing. If i would split up my HDD and save something while using the 32bit version how would i get the saved file over to the 64bit version? Do i have to use a USB or can i drag it into the 64bit part of the HDD?
View 7 Replies
View Related
Jul 20, 2010
1) Can I just add my old Windows XP Pro 32-bit SATA hard drive to my new computer (due to arrive in a few days) that has Windows 7 Home Premium 64-bit installed and set up a dual boot? It would be nice to keep all my programs and files as they are. Or do I have to do a clean install? XP Pro was pre-installed on my 2nd to last system and I have a Product Key.
2) Once a dual boot is setup would there be a way to allocate different memory to each O/S? My new computer will have 8GB RAM and I want to take full advantage of it for the 64-bit O/S, but I understand that 4GB of RAM is the maximum for 32-bit systems and that it is sometimes a problem going that high (so I was thinking like 3 GB for the 32-bit O/S).
3) If I have both 7 64-bit and XP Pro 32-bit installed, will the old hardware like my scanner or a fax/modem card work like it did on my old computer for the new XP boot because they are not listed as compatible under Windows 7?
The reason I want to have a dual boot with XP Pro is I'm worried some of my most used programs will no longer work on the 64-bit system. And I heard the virtual XP is not that great, besides the fact that I would have to upgrade for $89 to get that capability.
View 3 Replies
View Related
Jun 23, 2011
I have just purchased a new pc that came with Windows 7 Home Premium 64-bit, which wont run my company software, which was made in 1995, 16 bit. This 16bit software ran fine on my previous pc, which had Windows 7 Starter 32-bit. But the 64 bit Windows 7 version wont run it, I cant use Windows XP Mode on my version of Windows 7, need Pro - Ultimate Version.
I want to install and run the Windows 7 32-bit I have, on my new pc (I still have the installation disk) on a separate partition and keep the 64 bit version to. Is this possible to install both 32 bit and 64 bit versions of Windows 7 and then select which to run when the pc boots?
View 3 Replies
View Related
Nov 8, 2009
I have purchased and downloaded both 32 bit and 64 bit Windows7 Professional (no CDs or media here only download version)
I sucessfully upgraded from Vista 32 to Windows 7 32
Then I upgraded my hard disk (140Gb 500GB) and RAM (3GB to to 4GB)
Now I would like to go from Windows 7 32bit to 64bit
When I try and run the Windows 7-P-retail-en-us.x64.exe file it upacks the box then stops with this error:"We are unable to create or save files in the folder in which this application was downloaded. Please check the folder properties to make sure that you have security permission on the folder to write flies and that that folder is not read only".
I am the System Admin and I have full rights, and have moved the exe and the setup box files to My Documentsand I have modified the directory properties/attributes but I still get the same error over and over.
I searched the posts and some people stated one needs a clean install others say you can upgrade from any version so I am trying the upgrade here especially since the upgrade from Vista 32 to Windows 7 32 was smooth and did require all the extra work of a reinstall.
View 1 Replies
View Related
Oct 28, 2009
I purchased the Win 7 Pro Upgrade 32bit via digitalriver, but I've been doing some reseach and probably should have selected the 64bit version.
- Any ideas how I can get the 64bit version?
- For those who ordered the 32bit back-up disc kit for the extra $15 and have received it, does it come with both 32bit & 64bit?
- I've already installed and activated the 32bit version, but when I go to install the 64bit version, will I need to / is there a way to deactivate my initial 32bit install or will this not matter?
View 1 Replies
View Related
Oct 28, 2009
I use VPN-1 SecureClient to connect to my workplace and I hear that it doesn't play well with 64bit Windows 7. So I'm wanting to do all my non-work applications with Windows 7.And then when I need to do work, I'll just reboot under XP.
View 7 Replies
View Related
Nov 12, 2009
As currently configured, XP is on drive C:, Win 7 was added to drive E:, and the system is currently run as a dual boot. Attempting to boot without the XP drive present will yield a "NTLDR is missing" error very early in the boot process.
I have already tried the following:
(1) I moved the hidden Windows Boot Manager files (bootmgr as well as the associated Boot folder) from the XP drive root to the Win 7 drive root.
(2) After physically removing the XP drive, I rebooted to the Win 7 installation DVD, and used the "Repair Your Computer" option to pull up the "Recovery Tools". Then, using the command prompt utility, ...
(3) I attempted to write a new boot sector to the Windows 7 disk using the command: Bootrec /fixboot, - that yields an error though. The Bootrec /fixmbr claimed success, but ultimately did not make Win 7 drive bootable.
I had to reconnect drive C: just to boot into Win 7 again to write this. I do have files backed up, but to format and reinstall files would take many hours beyond just the time to transfer 400 GB of data, since I have dozens of purchased applications that need to be freshly reinstalled and validated as well. Basically I want my E: drive now to be my boot drive while the C: drive is reformatted and used for general storage.
Any idea how to make my Win 7 drive bootable? Do I need a partition program that is more adept at creating a viable boot sector, or is that even the problem?
View 9 Replies
View Related
Jun 30, 2009
Is it possible to dual boot a 32bit and 64bit system on the same computer?
View 1 Replies
View Related
Mar 2, 2011
Can I boot Windows 7 64bit on a 32bit processor if the Windows installation took place on a 64bit processor?
View 10 Replies
View Related
Oct 30, 2009
I have XP (x86) installed on one partition.
Last night I installed Windows 7 (x64) on a separate partition.
Anytime I had tried this in the past, using Vista, it always detected the Windows XP partition, and gave me a boot menu with "Earlier Version of Windows" option to boot to.
This is not so with Windows 7.
How can I get the boot menu to show both options, to boot to XP or to Windows 7?
View 9 Replies
View Related
Sep 24, 2009
I was having win 7 RTM and i tried to installl OSx86 in second hard disk
after few failure i successfully installed OSx86 in my secondary had disk now the problem is that i cant boot win 7
i changed boot order i tried windows 7 disk repair
but both failed
im getting some Boot mldr missing...
Actually even OSx86 is not booting i get OSx86 boot screen with two hard disk to select if i select windows disk it still says the same Boot mldr missing.
View 3 Replies
View Related
Jan 23, 2009
Anybody want to share their experience installing and booting OSX and Windows 7 in a dual boot, single drive, setup? I'm experienced in partitioning, etc. My first try was not sucessful, but I didn't really give it a chance. I had OSX running, but I couldn't get the dual boot sorted out and I ruined my Windows installation a couple times...gave up.
Just looking to see if threre are any people out there that can steer me a little.
View 9 Replies
View Related
Nov 4, 2009
First of all I had Windows 7 ultimate and 1 partition. Then I made a second partition, and installed Win XP to it. Win XP wiped out the Windows 7 boot option. I used my Windows 7 disc to repair startup and my hope was to have dual-boot on my hdd. BUT... Windows 7 couldnt repair my startup, cause I just bought a new graphic card and when Im tryin to boot from dvd it says NO!! >< because of the hardware changes >< so I have 2 partitions now and only #2 is working --> the XP
View 1 Replies
View Related
Nov 10, 2009
I have a new PC with Windows 7 pre-installed. My old PC died, but I have the hard drive that has WinXP loaded on it.
The old drive has two partitions, one for data and one for the WinXP OS. The OLD drive WinXP OS partition is identified as G-drive under Windows 7. NTLDR is located in the OLD drive now identified as the F-drive partition under Windows 7.
I've used EasyBCD to add the old drive and have the drive set as F for the WinXP boot loader. When I start the PC, I have the choice of Windows 7 or WinXP, but when I select WinXP, the system hangs and won't let me proceed. I can only boot under Windows 7.
I've obviously made an error somewhere....thoughts/suggestions?
View 2 Replies
View Related
Dec 3, 2009
I want to set up a dual boot system with 2 times Win 7. One system with Office software and related, the other with multimedia software like Photoshop etc. My experience with Xp systems is that that postpones the unavoidable clutter that Windows creates on a system disk. Also, I found it convenient to be able to access the system disk of the respective one system from the other one that is booted at the moment (backup, repair,...).
Now I want to do that for my new PC, too. I have a new PC with one 250GB HDD for the two OSs, and two 250GB HDDs (RAID0) for data. How do I go about installing the two OSs on two partitions? My first tries showed that I need one 100MB partition for the boot manager; two partitions of 80GB each are for the two Windows 7 systems, and the remaining partition for the application software (paging file will be on the RAID HDD).
View 9 Replies
View Related
Mar 10, 2009
I am currently the Operations Lead for a BF2 Modification called Project Reality, which is quite a popular game, but am having a few problems at the moment.
I installed Windows 7 - build 7000 when it first came out, as a dual boot, I liked it so much I carried out a full install and removed XP.
Everything worked fine up until a week ago, where I can now longer launch the game I develop ....lol, as it runs of the BF2 exe that means it is reliant when in multiplayer mode on Punkbuster, from evenbalance.com (an anti cheat programme).
This occurred I think when I carried out a Windows 7 Update. Looking into it I now know that Windows 7 and Punbuster are not compatible, and the statement from evenbalance.com, is that they will not support a Beta OS, which is fine I understand.
Therefore I decided to create a partition in Windows 7, assign it a drive letter, and then reboot it to install XP on that new drive.
All goes fine until XP does it initial reboot to continue its install, and it comes up with
"Disk error press ctl / alt / del to restart" ............. and thats it - nothing from then on in.
I had to use the Windows 7 DVD to "repair" the OS and then get it back on.
So for some reason I can not create a dual boot from within this OS.
Can anyone advise if I am doing something wrong here, or if mentioned before pass me a link on ?
View 2 Replies
View Related
Oct 22, 2009
Has anybody successfully dual-booted windows 7 with windows 7?
I'd like 2 totally different set ups but it seems to not work
View 11 Replies
View Related
Feb 21, 2010
Current config: AMD PHenom X4 processor; 8gb ram; Nvidia graphics card; 2-1tb hard drives; 1 250gb hard drive; 1 160gb hard drive; 2 dvd-RW drives. Now booting into Win 7 32 bit. Want to set up a second boot with XP Pro. I tried installing XP on the 160gb drive (H, reconnected C; D: E: drives, used Easy BCD to setup dual boot. Won't boot to XP. Also would like to set up the 250gb drive for Ubuntu.
View 6 Replies
View Related
Aug 17, 2009
I've been going at this all day searching, trial and error, and it's all very frustrating at this point.
I use a custom bootloader for my vista 64 to trick it to be activated (not sure your policy on discussing this). But now I wanted to try Windows 7 since it has been released in the RC status (because I had aquaintances try 7000 beta, and no one liked it). So I want to have it on my machine to tinker with and test it out.
I ended up taking my 300GB drive, and removing about 60GB from it, creating a logical partition, formatting it, then booted into the Windows 7 dvd I have. (win 7 - 7600)
Firstly, it takes about a couple minutes just to load the files. Then once it finally gets to the splash* screen and the cursor appears.....it takes about 5-10minutes for the "install" window to appear which seems VERY odd since my machine is VERY fast.
It takes quite a bit of time to accomplish installing from loading to finished (30minutes maybe), and by then it overwrites my bootloader for my VISTA installation (so its not activated anymore), and it shows WIN 7, and below that Vista 64. Read more at the forum...
View 9 Replies
View Related
Nov 28, 2009
I have 2 hard drives with XP installed on 1 and then i installed windows 7 on the other. On bootup i get the option to select the operating systems.
Now i want to only have windows 7 and remove XP completely so that i can format the hard drive with xp on and use as backup.
The problem is that when i switch boot sequence to boot off the win 7 hdd first, i get BOOTMGR is missing. I have tried the startup repair from the win 7 cd but it also fails with an error saying Missing boot manager.
If i switch back to use XP hdd as 1st boot device, i get the OS options screen again and can boot into both without issue.
Does anyone have any idea of how i can get rid of XP and boot with only windows 7 as first boot device?
View 5 Replies
View Related
Jan 4, 2010
I originally had win XP installed in my computer... I upgraded to Windows 7 through the internet download process.
A while after I found this tutorial and decided that I wanted to dual boot XP (I have the original XP disc) in my machine. When I tried installing XP and it got to the point where it need to restart to continue the installation, it never proceeds. It just stays black with a cursor display.
When I try to restart the computer without the XP disc so I can try and get into 7 it also doesnt boot up and just gives me the cursor blinking.
Any idea what happened?
Ive tried reinstalling XP many times without any success.
View 9 Replies
View Related
Jan 6, 2010
Complaint: When starting computer, boot manager does not show Win 7
Symptoms: Previously, my system was running XP 32 bit and Vista 32 without any problems. After installing Vista, I found it quite easy to use EASYBCD to properly configure the boot manager to have XP as the default system, and Vista as the optional system further down the line. The two OSs are set on separate partitions of the same disk. Note however that the disk is actually a RAID 1 array.
A few days ago I installed Windows 7 Professional 64 bit, as a clean install after wiping out the Vista partition. Installation proceeded without difficulty, but when I tried to make the necessary changes to the boot file via EASYBCD, the XP partition was not listed. So I mounted the partition and labeled it as X:, and went back to EASYBCD to add XP to the X: partition.
But after restarting, the boot manager menu listed:
(1)Older version of Windows
(2)Vista boot loader
When I choose (1), a new table comes up that lists only XP. If chosen, XP starts without difficulty.
When I choose (2), I get an error screen. I will post the exact error message momentarily.
I thought maybe the boot needed to be repaired, so I booted off the Win 7 DVD and instructed it to fix my computer. But after running a scan, a window popped up telling me that there was no problem to fix. I then restarted the system, leaving the DVD in the drive, but when prompted, I allowed the system to continue loading instead of striking a key to boot from the Win 7 DVD.
Instead of the boot menu above, the new menu was:
(1) Windows 7
(2) Windows XP
This is exactly what I told EASYBCD to do! But I can only get to this menu if I have the Win 7 DVD in the drive when I start up the computer! Note that I am NOT booting off the disk; the disk is simply sitting in the drive! When the bios checks the drive for a disk and sees one is present, it asks me if I want to boot from it (press any key) or not (do nothing). Whenever I do nothing, I get the right boot menu!
I have spent many, many hours and scoured the forums, but I have yet to see this problem described.
I will post a screen image of my disk management shortly. I will also post a copy of the EASYBCD screen image.
View 9 Replies
View Related
May 4, 2009
So until installing the RC, I upgraded to all of the previous builds. That kept my boot settings and whatnot. But seince doing a clean install (and doing an Easy Transfer) I lost my version of BCD. To fix that, I got the newest version. I was able to get it to add an entry for XP to the bootloader, but still cannot boot into XP. I don't know what the heck the problem is. Now, I have it all screwed up so that I boot by default into "Windows Vista" which is actually Windows 7. Any thoughts?
View 6 Replies
View Related
Feb 15, 2009
I have a simple xp 32 computer and would like to dual boot (from a partition) with windows 7. my problem seems to lie in whether i have enable my usb to be bootable as a dvd install of windows 7. it seems very complicated, and i am interested in figuring out whether it was possible to simply create the partition (with gpart) than in windows mount windows 7 and when it asks where it wants to be installed, I would than chose my new partition.
I don't know... (don't want to screw up)
I hope this makes sense...
I really would like to try widows 7, and any help would be very much appreciated .
View 23 Replies
View Related
Jan 31, 2010
I am running Windows 7 64bit. My printer only has 32 bit drivers. Is there any way I can get a windows 64 bit 32bit printer emulator? If not then I have to install 32bit Windows XP on my computer as well. Now after I partition my hard drive, will I be able to get that space back? For ex. I make a partition 50GB for windows XP, Will I be able to put that 50GB back into my windows 7 partition if I delete Windows XP?
Will the 2 partitions be able to communicate with each other? Like will I be able to take files from the partition that Windows XP is on if i'm logged on my Windows 7 and vice versa. Will I also need to install antivirus and things for Windows XP? One last question... I have 9MB unallocated(lol) How do i get that back into my hard drive?
View 7 Replies
View Related
Jul 29, 2009
I started out with Vista 32 Ultimate installed on my machine. I created a second partition on that system drive , and left my data drive alone and installed Win 7 64 Ultimate RC on the new partition. The system boots to win7 with no boot menu to pick vista from, any ideas?
View 2 Replies
View Related
