Sound Cards For Windows 7?

Nov 12, 2011

sound blaster works with 32 bit windows7 but not 64 bit windows 7

View 2 Replies


ADVERTISEMENT

Best Sound Cards For Windows 7?

Feb 18, 2012

Upgraded Dell XPS 710 (2006 build) from Windows XP to 7. Only issue is no sound from the Sound Blaster sound card. I've tried ALL trouble- shooting tips from Microsoft and Sound Blaster. I'm able to hear sound when I perform a sound test during SB's setup through all my 5.1 speakers. Otherwise just crackle or silence. Do I just need to break down and buy a new sound card?

View 4 Replies View Related

Sound Cards Compatible With Windows 7?

Dec 5, 2011

No sound with Win7 on my Asus P4V800D-X mother board. Is it fixable or do I need a new sound card?

View 3 Replies View Related

Sound Cards Supported By Windows 7?

Jan 2, 2012

where can I find a list of these cards, I have looked all over but such a list does not seem readily available.

View 3 Replies View Related

Don't Know Crap About Sound Cards?

Dec 13, 2011

I bought Sony PC Speakers and some 900MHz Wireless Stereo Headphones so I can watch Net flex without disturbing anyone. I paid about $50 each so their mid-range. If the movie is quite I can just barely hear a little buzz but that's only about 5% of the time so I thought it might be a good idea to get a sound card instead of using the motherboards sound so what would you recommend but I don't know crap about sound cards?

View 1 Replies View Related

Creative Sound Cards

Aug 21, 2009

Seen this enough here and elsewhere with people not knowing or understanding the differences between the different cards. For example have seen too many instances of someone recommending regular X-Fi drivers with the Xtreme Audio. With that said here we go,

1. Audigy SE/LS/Value, X-Fi Xtreme Audio and the Sound Blaster 24 bit

All of these cards are virtually identical hardware-wise, and for the most part the drivers are interchangeable. The only thing the Xtreme Audio has over the others is that it gets to use some of the X-Fi software (and supports Entertainment mode only). Drivers for all of these cards can be found on Creatives support pages,

-------------------------
Creative Worldwide Support > Sound Blaster

http://support.creative.com/Products/Products.aspx?catid=1
-------------------------

the Audigy and Live 24 bit can be found by using the "If your product is not listed above, please click here." link at the bottom of the page. Alternatively you can also try/use the Daniel_k package,

------------------------
SB P17X Series Support Pack 2.0 (07/31/2009) - Aud... - Creative Labs

http://forums.creative.com/t5/Sound-Blaster/SB-P17X-Series-Support-Pack-2-0-07-31-2009-AudigySE-Value-LS/td-p/533291

------------------------
Filefront mirror - Download P17X_SupportPack_2_0.exe

http://www.filefront.com/14952823/P17X-SupportPack-2-0.exe/
------------------------

that has been modified to work with all the above cards (single installer and driver) as well as return the use of some of the applications that used to work in XP (and Vista if the card was bought recently enough and came with Vista drivers on the CD).

2. The Audigy 1, 2 (all, including the 2 Value) and 4 series. These cards again all use the same driver and can be found through the saem link as above. And again there is also the Daniel_K driver set,

----------------------------------
SB Audigy Series Support Pack 3.6 (11/09/2009) - Creative Labs

http://forums.creative.com/t5/Sound-Blaster/SB-Audigy-Series-Support-Pack-3-6-11-09-2009/td-p/540934
----------------------------------

Filefront mirror - Download Audigy_SupportPack_3_6.exe

http://www.filefront.com/14930847/Audigy-SupportPack-3-6.exe/
----------------------------------

and will not work with any of the cards from #1.

3. Original X-Fi series and the new Titanium series. Again latest drivers as well as some of the applications can be found on Creative's site, as well as the daniel_K set,

-----------------------------------------------------
SB X-Fi Series Support Pack 2.0 (05/15/2009) - Creative Labs

http://forums.creative.com/t5/Sound-Blaster/SB-X-Fi-Series-Support-Pack-2-0-05-15-2009/td-p/527485

------------------------------------------------------
Filefront mirror - Download XFI_SupportPack_2_0.exe

http://www.filefront.com/14952787/XFI-SupportPack-2-0.exe/
------------------------------------------------------

Again like the regular Audigy drivers, these will not work with the Xtreme Audio.

4. That leaves the original SB Live series of cards. There is not now and never will be any support for these cards from Creative, and I really wouldn't expect them too considering most of these cards are from the Windows 95/98 era. For anyone with one of these cards the only option you really have (applies to Vista as well) is yet another Daniel_K modified driver set,

-------------------------
SB Live! series Support Pack 1.5 (08/09/2009) - Creative Labs

http://forums.creative.com/t5/Sound-Blaster/SB-Live-series-Support-Pack-1-5-08-09-2009/td-p/533861
-------------------------

Filefront mirror - Download SBLive_SupportPack_1_5.rar

http://www.filefront.com/14932269/SBLive-SupportPack-1-5.rar/
-------------------------

See post #10 for how to install these drivers manually.

Updated link for #2.

View 9 Replies View Related

Sound Cards That WORK

Jan 28, 2009

I'm after a list of Sound cards that people absolutely know work in Windows 7 (beta build 7000) and have drivers that support them which also are compatible with Windows 7.

List of Sound Cards and Drivers that work:

-Creative Sound Blaster Audigy 4 (Drivers Located here)

-M-Audio's Delta 1010 LT soundcard with drivers made for Vista SP1, with Windows 7's compatibility program (All Delta series may work with Vista SP1)

-Asus Xonar D2 sound card works, Recording features may not work in some with some driver software.

-Sound blaster Audigy 2 SE works with the drivers from windows update

-Soundblaster live, only with kxproject drivers. WARNING: The windows update drivers give terrible sound.

View 9 Replies View Related

How To Configure Two Sound Cards

Apr 29, 2011

how to configure two sound cards in one pc VISTA

View 1 Replies View Related

Sound Cards Over Realtek

May 1, 2012

I am wanting to Install a sound blaster audigy se on windows 7 it has real tek, do I have to disconect realtek some how??

View 3 Replies View Related

PCI-X Video Cards With Windows 7?

Oct 23, 2012

I have an old HP Proliant PC that I upgraded to Windows 7 Professional. There are only two PCI-X slots (one half height and the other full height). This is not PCI-Express or plain PCI.i need to add a video card to support a higher resolution monitor. There is an ATI Radeon 9200 PCI-X card out there, but it is not supported with Windows 7. Since this card type is more than 10 years old and operating systems have moved on, I need to know where to find a new PCI-X graphics card (or used) that will support higher resolution. If a standard PCI card will fit in the slot, will it work and what is the down side.no drivers for Windows 7 with PCI-X.

View 4 Replies View Related

Two Video Cards In Windows 7 X64?

Jan 5, 2010

I recently built a new machine that I have three monitors for. When I only had two monitors I had this card installed: Newegg.com - PNY XLR8 VCG98GTEE5XEB GeForce 9800 GT EE 512MB 256-bit GDDR3 PCI Express 2.0 x16 HDCP Ready SLI Supported Video Card - Desktop Graphics / Video Cards

This card works perfectly fine and I had no issues with it and I plan to continue using it. However, now that I have three monitors and I need another video card I'm running into a lot of issues. I tried installing another PCIe 16 card I had lying around but my setup didn't seem to recognize the new card. I do not have the exact model number on that since it was given to me, but I believe it was a GeForce 6 series card. I also tried a PCI ATI Radeon card that I had laying around found here Newegg.com - SAPPHIRE 100945L-BK Radeon 7000 64MB 64-bit DDR PCI Video Card - Desktop Graphics / Video Cards

This card showed up in the device manager as a Standard VGA adapater but in the properties it had an error saying "The device could not start".

So I guess my question is this: What is the cheapest way to get three monitors working on my windows 7 64 bit machine? I want to use the first card I linked to and one other one.

Would this card work? [URL] - PNY VCG84512SPEB GeForce 8400 GS 512MB 64-bit GDDR2 PCI Video Card - Desktop Graphics / Video Cards

Here is my motherboard in case that'll help: ASRock > Products > M3A780GXH/128M

View 9 Replies View Related

Tv Capture Cards For Windows 7

Nov 29, 2012

do you know any tv capture card made for windows 7 o/s

View 1 Replies View Related

Pci Video Cards That Will Work With Windows 7 64-bit?

Aug 28, 2012

i have a question. i am running a quad screen set-up. i have been running windows 7 32-bit. with 2 video cards1 pci-e ati radeon hd 4350 now it was working great in windows 7 32-bit, but ever since i upgraded to windows 7-64 bit. its not working at 100%now i have been reading alot on this forum that alot of people have trouble getting the fx 5200 working. after trying many different drivers i finally was able to get it working. the only catch is that. i had to turn off aero and disable other aero features so it can run with better performance.but even after doing that. the ony problem i have is that videos such as in Internet. run slow seem to lag a little and worse when i put it on full screen.i figure its the card because its so old and its a pci card

View 5 Replies View Related

Windows Corrupting Memory Cards

Feb 6, 2012

any computer running windows 7 but this new laptop i have (hp g6 core i5) seems to be continually corrupting memory cards out of my camera! when i first insert the memory card and view the pictures and go to change their orientation; windows comes up with a message saying it can't change it because the picture is no longer there! when you go back to view the folders on the card they appear as symbols as they have been corrupted! the first time it happened i downloaded (and purchased the key) for recovery which seems to do a good job of recovering the images. its really annoying me as to why it is happening! i'm now very careful and transfer images from the sd to the laptop straight away and safely remove the card afterwards. the laptop also corrupted a different memory card when the lid was shut and re-opened but im assuming this is because the computer was hibernating without the card being safely removed.has anybody else had this problem and if so how can it be sorted?

View 7 Replies View Related

Windows 7 Readyboost Compatible Sd Cards?

Dec 29, 2010

Why does Windows 7 say my 32gb sandisk SDHC 4 is not suitable or does not have the caracteristics for readyboost. Is there anything I can do to change the cards caracteristics so that it will work with readyboost?

View 5 Replies View Related

Creata Cards How Do I Get To Install On Windows 7

Feb 2, 2012

I have Creatacard Gold that use a lot and love, but I just changed to window y and it won't run I need an upgrad so I can access my addresses and stuff I have stored there.

View 6 Replies View Related

Cannot Open 2 Of 16 Media Cards In Windows 7

Feb 12, 2013

New computer......can downlosd all pics on 16 other media cards, but cannot open 2 cards. I had a friend put the 2 cards in his PC and they were fine.

View 1 Replies View Related

Looking For AGP Video Cards Supported In Windows 7 32bit

May 26, 2012

I wonder if there are some AGP video card that are supported in Windows 7 32-bit?

View 6 Replies View Related

Windows 7 Stopped Reading Thumb Drives And SD Ram Cards?

Feb 22, 2011

My laptop, running Windows 7, suddenly started giving me an error message with code 10, and says "You need to format the disk before you can use it, do you want to format now", every time I insert a thumb drive or an SD ram card. When I go into disk management it shows that they are both "raw"n but when I insert them into my desktop running XP they read fine and disk management shows them as fat32. Why would Windows 7 suddenly start reading the fat32 thumb drives and SD ram cards as Raw? How can I get it to read them, as they read fine on other computers? I also have an external cdrom/dvd drive (because Windows 7 won't recognise the internal cdrom either), and also have an external hard drive that work fine.

View 4 Replies View Related

Geforce 4 Mx 4000 Driver Graphics Cards For Windows 7

Aug 8, 2012

i need driver geforce mx4000agp for windowes 7 32bit

View 1 Replies View Related

SLI With 2 Different Cards Same GPU

Oct 17, 2009

I have two 9500GT video cards one id Evga and one is BFG they are both 1GB DDR2. I have looked into it but you experts will know. I think it's possible to set up a crossfire configuration. It might not be worth doing but i would mostly do it for fun and to see if I can get it working. My current mobo supports it and would like to play with it.

Is it possible with the same GPU but different companies and possibly slightly different specs on the rest of the card? I thought if it the same GPU you could do it.

http://www.newegg.com/Product/Product.aspx?Item=N82E16814143150
http://www.newegg.com/Product/Product.aspx?Item=N82E16814130395

Also you might know if I can make a USB install flash drive with professional and use it to install home premium or ultimate as long as I have the licence keys?

View 4 Replies View Related

2 Different Nvidia Cards?

Jul 31, 2009

Just a thought. I'm currently running an XFX 260 Black Edition on my Asus P5Q Pro MB.

I still have my old card- A BFG 8800GTS OC 512MB.

I kept meaning to ebay it but never got round to it.

Is there any way I could usefuly use it in my present set up?

View 5 Replies View Related

Possible To Put 2 Video-cards In One Pc?

Jun 5, 2012

Is it possible to put a Nvidea GTX 560 + Nvidea GTX 670 in one pc, and get them work both with one monitor?

View 7 Replies View Related

ATI Cards And Samsung LCD

May 5, 2009

i just installed the latest build of Windows 7 (build 7100). and there are a few problems with my graphics options. There are 2 systems that i tried this on and both are having the same problem. The first setup has a Ati Radeon X1650 by MSI, and the drivers install, signed by WDDM. Now the monitor/tv that i am using is a 42inch LCD TV, and has the 1920x1080 resolution, that is its native resolution. Windows 7, supports the resolution and has it as the recommended resolution, however, when i select it, my monitor says "mode not supported" this is the same problem i have with the HD2600XT card from ATI.

Both of these cards work in Vista Ultimate, Vista Home Premium, Vista Business, and XP Pro SP3 and XP Home SP3, and even tried Server 2008 and server 2003. all of those OS's work with the native resolution on the monitor except the Windows 7 builds. anyone have an idea why this would be??

also, for the HD2600XT i did install the latest ati driver 9-4, and nothing is fixed. right now i am running it at 1280x768, but its skewed.

if anyone has any info on this it would be great, as i have tried everything.

i have also tried installing the 9-3 drivers on both cards, manually and using the installs. the manual way was to unzip the driver package and in device manager install the drivers myself.

The one system i have plugged into it now is a Shuttle Barebone SG31G2B, 4 GB of ddr2/800 ram, quad core q6600 2.4ghz, and the hd 2600xt.

View 9 Replies View Related

What Are Smart Cards?

Oct 31, 2009

Microsoft says that Smart Cards can be used in conjunction with Encypting File System (EFS) to keep the encryption key off the computer.

What are smart cards, and is that the only it can be done? Why not a regular SD card or flash drive?

View 8 Replies View Related

Pci Cards And XP Mode

Sep 30, 2009

Will pci cards such as ones for connecting CCTV cameras to a PC work in Win 7 XP mode.

View 1 Replies View Related

Two Network Cards In Windows 7 Networking To Windows XP

Jul 12, 2011

I am currently having a problem that has been troubling me for a long time, I've looked all over the internet and I still haven't found a solution. My problem is that my XP network cannot access my Win7 server, but its not the same problem that has so many solutions around on the internet.Here is my situation:I have 2 networks in my office.

-Network1 consists of 3 WinXP machines connected via Router1 to Modem1 to the internet.
-Network2 consists of 7 64-bit Windows7 machines connected via a Switch to Router2 to Modem2 and then to the internet.

I also have a server machine running Windows7 64bit with two network cards. One NIC is connected to Router1, the other connected to the Switch. All of the above machines are all under the same work group: WORKGROUP.My Windows7 machines on Network2 can interact fine with the server. However, my WinXP machines cannot access the server "most" of the time, I've had a rare few occasions where it magically worked.

View 2 Replies View Related

Cards Not Seen In USB Card Reader

Dec 30, 2011

When I put a CF or an SDHC card in the internal (USB) cardreaderor in an external (USB) cardreader, those cards are not seen, although the readers are seen alright.When I disconnect the internal reader, put a card in it, and connect it again to USB, the card is seen. Take the card out, put it in again; no card. Same with he external reader.I checked Device Manager on possible wrong settings, but couldn't find anything.

View 6 Replies View Related

No Memory Cards Working

Jul 11, 2011

The problem is that no kinds of storage cards are currently working perfect on my computer.For an example no phones can be connected, have tryed 2 htc's with microsd cards, and a sony ericson with an m2 card, and same problem. Also if i try to open any SD cards, like camera it dosent work.The thing is that it comes up as removable drive, but when i try to open it it just says please insert card. I have tryed deleting, installing reformatting drivers, and cards like crazy and its the same. I have also tryed changing the drive letters around but the issue is the same.The only thing that makes the work is the following: If i leave the card in the cardreader, or a phone connected, then restarts the pc whitout removing the card or phone, then it works when its rebooted. but asoon as i remove the card/phone and reinsert them the issue is still there "please insert card".I have even changed the motherboard, cpu, and memory, and formated the computer 3 times but still same issue. So im thinking that windows is installing wrong driver or something? [code] Also the issue was the same on my old computer also running windows 7 that had a socket 775 build.

View 9 Replies View Related

Toshiba Flash Cards

Mar 9, 2009

Dont know if it should be in here Toshiba Flash Cards is a program that runs when you press 'FN' it displays a top flash card thingy that allows you to use the FN -> F2 etc... keys cant get this to work on windows 7 though anyone got any ideas ill try a few more things i think might be able to fix it but does anyone else have any ideas?

UPDATE: seems to be a error with KeNotify.exe...... When i press FN it crashes KeNotify

UPDATE 2: Running in Compatibility and/or Running as administrator still makes it crash.

View 3 Replies View Related

Information About Capture Cards And How To Use Them

Jan 15, 2013

i usually record PC games using fraps and it got me thinking to how do people record console footage and then put it on the computer.The problem is i dont know the first thing about gaming capture cards and how they work, i do know however that some of them are PCI cards.

1. if a console is connected to a T.V how is the footage captured from the console to a PC?

2. Does using capture cards also provide audio or do you need certain cables (3.5 jacks, hdmis, etc)

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved